Deye SUN-10K-SG05LP3-EU-SM2 Three-phase hybrid inverter 10KW

The Deye SUN-20K-SG05LP3-EU-SM2 offers a reliable and efficient solution for energy conversion in photovoltaic systems. With its high charging and discharging capacity and support for various battery types, it is ideal for demanding energy projects.Highlights at a glanceHigh performance: 20 kW rated output for high energy requirements Flexible battery selectionCompatible with lead-acid and lithium-ion batteries High charging/discharging current: Up to 350A for fast power transmission Expandable: Parallel connection of up to 10 devices possible Robust designIP65 protection class for use in various environments Efficient energy conversion for modern requirementsThe Deye SUN-20K-SG05LP3-EU-SM2 is specially designed to meet the requirements of modern photovoltaic systems. With its three-phase output power and support for 48V low-voltage batteries, it offers an efficient solution for energy conversion and storage.Flexibility and scalabilityThanks to the option of connecting up to 10 devices in parallel, the inverter can be flexibly adapted to different system sizes. The support of both lead-acid and lithium-ion batteries enables customised adaptation to specific energy requirements.Reliability and protectionWith a protection class of IP65, the inverter is protected against dust and water, ensuring reliable operation in different environments. The integrated protective functions ensure safe and stable operation of the system.Who is the Deye SUN-20K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for: Operators of larger solar systems who are looking for a flexible and safe storage solution Commercial enterprises that want to cover energy peaks or work off-grid Homeowners who want to maximise their self-consumption rate Users with diesel generator support who are aiming for maximum self-sufficiency  ModelSUN-20K-SG05LP3-EU-SM2 Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60V Max. Charging current (A)350A Max. Discharge current (A)350A Charging strategy for Li-ion batterySelf-adaptation to BMS Number of battery inputs2 Input data of the PV string Max. DC input power (W)32000W Max. DC input voltage (V)800V Starting voltage (V)160V MPPT voltage range (V)160V-650V Rated DC input voltage (V)550V Max. Operating PV input current (A)36+36A Max. Input short-circuit current (A)54+54A Number of MPP trackers/Number of MPP tracker strings2/2+2 AC input/output side Rated AC input/output effective power20000 Max. AC input/output apparent power22000 AC input/output rated current (A)30.4/29 Max. AC input/output current (A)33.4/31.9 Max. Continuous AC passthrough (mains for charging)70 Peak power (without mains)2x rated output power, 10s Setting range of the power factor0.8 leading to 0.8 trailing Nominal input/output voltage/range (V)220/380V, 230/400V 0.85Un-1.1Un Nominal input/output mains frequency/range(Hz)50/45-55, 60/55-65 Form of the mains connection3L+N+PE Total harmonic current distortion (THDi)<3% ( rated power ) DC current power supply<0.5% In Efficiency Max. Efficiency97,6% Euro efficiency97,0% MPPT efficiency>99% Protection of the devices IntegratedDC reverse polarity protection, AC output overcurrent protection, AC output overvoltage protection, AC output short-circuit protection, thermal protection, DC terminal insulation impedance monitoring, DC component monitoring, earth fault current monitoring, power grid monitoring, protection against islanding, earth fault detection, overvoltage load shedding protection, residual current monitoring (RCD), overvoltage category Overvoltage protection levelTYPE II(DC), TYPE II(AC) Interface Communication interfaceRS485/RS232/CAN Monitor modeGPRS/WIFI/Bluetooth/4G/LAN (optional) General data Operating temperature range (℃)-40 to +60°C, >45°C power reduction Permissible ambient humidity0-100% Permissible height3000m Noise (dB)<60 dB(A) Protection classIP 65 Inverter topologyNon-insulated Overvoltage categoryOVC II(DC), OVC III(AC) Dimensions (WxHxD mm)456×750×268.5 (without connectors and brackets) Weight (kg)51.9 Cooling modeIntelligent cooling Guarantee5-year/10-year warranty period depends on the installation conditions of the inverter. Details can be found in the general warranty conditions Mains regulationIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE guideline R25, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2  FAQs about the Deye Sun three-phase hybrid inverterWhich battery types are supported?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range from 40 to 60V.Can I operate several devices in parallel?Yes, up to 10 units can be operated in parallel, making the inverter ideal for larger systems.What is the maximum charging and discharging current?The maximum charging and discharging current is 350A each, which enables fast energy transfer.What is the standby consumption of the device?The Deye SUN-20K-SG05LP3-EU-SM2 has a self-consumption of ≤ 60 W.Does the 20 kW inverter fit on an 18 kWp system or do I have to oversize/undersize?Yes, the Deye SUN 20K-SG05LP3-EU-SM2 is technically optimised for an 18 kWp system. It does not necessarily have to be oversized or undersized. With a DC/AC ratio of around 0.9, it is exactly in the ideal range (0.9 - 1.1 is recommended). This means that the system is even slightly undersized, but this has practically no disadvantages and at the same time offers scope for retrofitting additional modules at a later date. Scope of delivery: Deye SUN-20K-SG05LP3-EU-SM2 (20 kW LV hybrid inverter) 1 x Deye SUN-20K-SG05LP3-EU-SM2 inverterAn extremely powerful three-phase hybrid inverter with 20 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA solid metal mounting rail for securely fastening the appliance to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x current transformer (CT)External hinged current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and plugs)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x operating instructions (user manual)A printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Felicity Solar FLA48230-EU is a powerful lithium iron phosphate (LiFePO4) home storage system in the low-voltage range (48V). With an impressive capacity of 11.8 kWh in a single housing, this model is aimed at homeowners who want to realise a large storage capacity in a small space and with minimal cabling.In contrast to modular systems, where you often have to stack two to three modules for 10-12 kWh, the FLA48230-EU offers this energy in a single, wall-mountable block. It is particularly popular in combination with Deye, Growatt or Victron inverters and is characterised by an excellent price-performance ratio.Highlights at a glanceMassive capacity (11.8 kWh): Offers 230 Ah at 51.2 V in a single device. This drastically reduces the installation effort, as fewer cable bridges and connections are required than with small storage systems.Safe LiFePO4 technology: Utilises lithium iron phosphate cells which are considered thermally stable, intrinsically safe (no thermal runaway) and extremely durable.Integrated display & BMS: A front-mounted LCD display shows SOC (state of charge), voltage and cell status. The BMS protects against overcharging, deep discharge and overheating.Space-saving wall mounting: The slimline design enables flat wall mounting (similar to a radiator), saving valuable floor space in the plant room.High cycle stability: Designed for >6000 cycles (at 80% DOD / 25°C). This corresponds to a service life of over 15 years with daily use.Wide compatibility: Has CAN and RS485 interfaces and is compatible with the market leaders in the 48V segment (Deye, Victron, GoodWe, Growatt, SMA via CAN box).Built-in DC isolator switch: Often has an integrated circuit breaker on the side to safely and quickly disconnect the battery from the system.Areas of applicationThe FLA48230-EU is ideal for medium to large households:Self-consumption optimisation: Stores enough energy to power households with heat pumps or electric cars through the night.Emergency power supply (backup): In combination with hybrid inverters (e.g. Deye 12K), the storage system can supply the entire house in the event of a grid failure.Off-grid systems: Popular for self-sufficient holiday homes due to its robust design and high capacity.Technology & Advantages"All-in-one" advantage: Instead of wiring three 4kWh blocks (sources of error, contact resistances, space requirements), you only install one unit here. The BMS only has to balance one large cell block, which is often more efficient.Scalability: Despite its size, the system is expandable. Up to 12 or 15 units (depending on the firmware) can be connected in parallel to build storage systems in the three-digit kWh range.Ease of maintenance: The connections are easily accessible and the display allows diagnostics without a laptop/PC.Installation & safety instructionsWeight warning: With over 100 kg this storage system is extremely heavy. The wall bracket must be anchored in load-bearing masonry (concrete/brick). Installation on plasterboard walls is not possible without solid reinforcement. Use a pallet truck or lift for installation.Cable cross-section: Due to the high currents (up to 120A), battery cables with at least 35mm², better 50mm² can be used to minimise voltage drops.DIP switch: When communicating with the inverter (esp. Deye/Victron), the DIP switches on the communication port must be set correctly to define the BMS protocol. Characteristics ModelFelicity Solar FLA48230-EU Technology**LiFePO4** (Lithium Iron Phosphate) - Safe & Durable Nominal voltage**51.2 V** (standard low voltage system) Capacity**230 Ah** Energy content**11.77 kWh** (Marketed as ~11.8 kWh) Usable energy (DOD)approx. 90% - 95% (depending on inverter setting) Lifespan**≥ 6000 cycles** (at 25°C, 80% DOD) Communication**CAN / RS485** (Compatible with Deye, Growatt, etc.) Mounting**Wall mounting** (bracket included) or stand Weightapprox. **100 - 105 kg** (Attention: Very heavy!) Dimensions (H x W x D in mm)approx. 900 x 675 x 200 (flat design)  FAQs for the Felicity FLA48230-EUDoes this battery work with the Deye SUN-12K-SG04LP3?Yes, excellent. This is one of the most common combinations. The battery is connected via CAN bus. In the Deye inverter, you usually select "Lithium Mode" and the protocol "00" (or "12" for Felicity, depending on the firmware), and the system automatically recognises the 230Ah.Can I retrofit two of these batteries later?Yes. You can connect several FLA48230s in parallel. One battery is configured as the "master" (DIP switch 1 ON) and the others as "slaves". Important: The batteries should have the same voltage (same state of charge) when they are connected in order to avoid high equalising currents.Why is "EU" in the name?The "EU" model is specifically certified for the European market (CE, UN38.3, MSDS) and complies with the applicable safety standards. The instructions and support are often also orientated towards European dealers. Scope of delivery: Felicity Solar FLA48230-EU (11.8 kWh LV battery storage) 1 x Felicity Solar FLA48230-EU battery moduleA standing 51.2V LiFePO4 energy storage system with a capacity of 230 Ah (11.77 kWh) and integrated battery management system (BMS).1 x set of DC power cables (power cable)A pair of high-current-resistant cables (plus and minus) for the electrical connection of the storage system to the low-voltage inverter.1 x BMS communication cableA pre-assembled data cable (RJ45) for communication between the battery and the inverter via CAN or RS485 interface.1 x earthing cableA yellow-green protective earthing cable for safe earthing of the battery housing.1 x wall mounting set / anti-tilt deviceMounting accessories for fixing the housing to the wall to prevent the upright storage system from tipping over.1 x mounting kit (screws and accessories)All small parts and screws required for installation and electrical connections.1 x User manualA technical manual with installation instructions, pin assignments for various inverters and safety instructions.

The Deye SUN-6K-SG05LP3-EU-SM2 is a three-phase hybrid inverter for solar energy utilisation in private and commercial applications. It combines an inverter, battery charger, and energy management system, ideal for new installations and retrofitting to increase the self-consumption rate and secure the energy supply.Highlights at a glanceHigh charging and discharging current up to 135 amps enables a fast storage and release of energyCompatibility with diesel generators ensures a reliable power supply even during grid failuresParallel operation of up to 10 devices allows flexible system expansionTime-based battery management with six programmable time windows optimises energy usage according to electricity tariffsMaximum safety during operation thanks to 48 volt low-voltage battery and transformer insulation designSupport for asymmetric loads with up to 50 per cent of the rated output per phase provides flexibility for various consumer profilesEfficient energy conversion for modern requirementsThe Deye SUN-6K-SG05LP3-EU-SM2 achieves a maximum efficiency of 97.6 per cent and an MPPT efficiency of over 99 per cent. Thanks to its wide MPPT voltage range from 200 to 650 volts, the inverter operates stably and efficiently even under variable irradiation conditions. This minimises energy losses and maximises the energy yields of the solar system.Flexibility and scalabilityThe Deye SUN-6K-SG05LP3-EU-SM2 can be flexibly adapted to different requirements by connecting up to ten units in parallel. AC coupling makes it easy to retrofit existing solar installations without extensive modifications. The inverter supports both lead-acid and lithium-ion batteries, enabling customised storage solutions. Time-based battery management allows charging and discharging operations to be targeted at favourable electricity tariffs to further reduce operating costs.Reliability and protectionWith an IP65 protection rating, the inverter is protected against dust and water and is also suitable for use in demanding environments. The wide operating temperature range from minus 40 to plus 60 degrees Celsius ensures stable operation under various climatic conditions. Extensive protection functions, including reverse polarity, overcurrent and overvoltage protection, thermal protection mechanisms and DC insulation impedance monitoring, ensure maximum safety and durability of the system.Who is the Deye SUN-6K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forPrivate households wishing to increase their self-consumption and reduce energy costsCommercial operations that depend on a flexible and secure power supplyUsers wishing to expand existing solar installations with a modern storage solutionInstallations in regions with unstable grid supply, where diesel generators are used as an additional energy source  ModelDEYE SUN 6K-SG05LP3-EU-SM2 Battery input data Battery typeLi-Ion Battery voltage range (V)40~60 Max. charging current (A)135 Max. discharge current (A)135 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)9600 Rated PV input voltage (V)550 Start voltage (V)160 MPP voltage range (V)200-650 Max. DC input voltage (V)800 PV input current (A)20+20 Max. PV short-circuit current (A)30+30 Number of MPPT2 Strings per MPPT1+1 AC output data AC rated power and UPS power (W)6000 Max. AC output power (W)6600 AC output rated current (A)9.1/8.7 Max. AC rated output current (A)10/9.6 Max. continuous AC transfer (A)45 Peak output (without grid)2x rated power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesDC polarity reverse connection protection, AC output overcurrent protection, thermal protection, AC outputsurge protection, AC output short-circuit protection, DC component monitoring, surge load case protection,earth fault current monitoring, arc fault current interrupter (optional), grid monitoring,islanding detection monitoring, earth fault detection, DC input switch, DC insulationimpedance monitoring, return current detection (RCD), surge protection level Surge protection categoryDC Type II/AC Type III Certifications and standards Grid approvalsIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Guideline R25, G98, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN; RS232 Weight (kg)35.2 Size (mm)422B×699.3H×279T Degree of protectionIP65 Installation styleWall mount Warranty10 years  FAQs about the 6kW Deye Sun three-phase hybrid inverterWhich battery types does the inverter support?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range from 40 to 60 volts.Can the inverter be operated with a diesel generator?Yes, the Deye SUN-6K-SG05LP3-EU-SM2 supports the integration of diesel generators and ensures an uninterruptible power supply.Is the inverter suitable for retrofitting existing installations?Yes, the inverter can be easily integrated into existing solar systems thanks to AC coupling.What is the maximum charging and discharging current?The maximum charging and discharging current is 135 amps each, which enables fast energy transfer.Does the Deye SUN-6K-SG05LP3-EU-SM2 have a remote shutdown function?Yes, the inverter supports immediate remote shutdown in the event of an accident. Scope of delivery: Deye SUN-6K-SG05LP3-EU-SM2 (6 kW LV Hybrid Inverter) 1 x Deye SUN-6K-SG05LP3-EU-SM2 inverterA three-phase hybrid inverter with 6 kW output, integrated LCD colour touchscreen, and support for 48V low-voltage battery systems.1 x Wall Mount BracketA sturdy metal mounting rail for secure attachment of the device to a load-bearing wall.1 x Wi-Fi Stick (data logger)A plug-in communication module for connecting to the internet for remote monitoring via Deye Cloud or Solarman App.3 x Current Transformer (CT)External split-core current transformers for measuring energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x Set of PV Connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x Communication Cable (BMS)A preassembled RJ45 data cable for connection between the inverter and the battery management system.1 x Mounting Kit (screws and plugs)A set of stainless steel screws and heavy-duty wall plugs for professional installation of the wall mount bracket.1 x User ManualA printed manual with detailed installation instructions, wiring diagrams, and safety information.