PANASONIC Lithium photobattery CR2 3V (single blister)

The XCELL XP7-12 is a valve-regulated AGM battery with 12 volts and a rated capacity of 7 Ah (C20). It impresses with its compact dimensions, high operational reliability and long service life. Thanks to its robust construction and low self-discharge, it is ideally suited for use in security and emergency power systems, medical technology, measurement and control technology, telecommunications, and in numerous mobile and stationary applications.Highlights at a glanceCompact power: 12 V, 7.0 Ah (20h)VdS approved: G 120023 for safety-related applicationsFlexible usage: Any operating position is possible (except permanently upside down)Long-lasting: Up to 5 years design life at 20 °CHigh reliability: Low self-discharge <3 % per month at 25 °CRobust housing: ABS UL94 HBReliable power supply for a wide range of applicationsXCELL ’s XP7-12 delivers consistent performance even under demanding conditions. AGM technology ensures efficient gas recombination, making the battery virtually maintenance-free. With a maximum discharge current capacity of 105 A (5 seconds), it is also suitable for applications with short-term peak loads.Efficiency meets durabilityIn standby mode, the battery should be charged to a voltage of 2.25–2.30 V/cell. For cyclic operation, a charging voltage of 2.45–2.50 V/cell is recommended. The temperature compensation is –3 mV/cell/°C in standby mode and –4 mV/cell/°C in cyclic operation. The recommended maximum current is 0.3C (approx. 2.1 A). In cyclic use, the battery achieves several hundred charge and discharge cycles, depending on the depth of discharge.Technology for flexible applicationsThe operating temperature range of the cells is between –15 °C and +50 °C during charging. During discharge, it is –20 °C to +60 °C, and during storage –20 °C to +50 °C. T1 or T2 plug-in connectors are available for the electrical connection. The recommended tightening torque for this is between 2 and 3 Newton metres. Each cell is also equipped with a safety valve, which further enhances operational safety.Features  ModelXCELL XP7-12 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)7.0 (at 20-hour rate) Maximum discharge current105A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 2.1 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, CE, UL  FAQ on the XCELL XP7-12 industrial batteryFor which applications is the XP7-12 ideally suited?The XCELL XP7-12 is ideal for emergency power supply, security and fire alarm systems, medical technology, telecommunications, measurement and control technology, as well as mobile devices with cyclic energy requirements.How cycle-stable is the XP7-12?At a 30% depth of discharge, the battery achieves over 1,000 charge and discharge cycles. At higher depths of discharge, the service life is reduced accordingly, but remains in the range of several hundred cycles.What are the specific safety features?The battery is equipped with pressure relief valves. Like all VRLA batteries, it may release small amounts of hydrogen. It should therefore not be operated in airtight enclosures and adequate ventilation must be ensured.Which chargers are suitable for the XP7-12?Constant-voltage chargers designed for VRLA AGM batteries are recommended. Correct setting of the charging voltage and temperature compensation is crucial for a long service life.How is the battery installed?The battery can be installed in any position except permanently upside down. Connection is via T1 or T2 plug-in terminals with a tightening torque of 2–3 Nm. 

The XCELL XP12-12F2 is a reliable, valve-regulated lead-acid battery with 12 volts and a capacity of 12 Ah. With 6.3 mm Faston plug-in terminals, compact dimensions and VdS certification (G120034), it is ideal for safety-critical applications such as fire and burglar alarm systems, UPS systems, and medical and industrial equipment. Its leak-proof AGM technology ensures a maintenance-free and long-lasting power supply.Highlights at a glanceVdS approved: G 120034 for safety-related applicationsCompact design: Measuring just 151 x 98 x 95 mm and weighing approx. 4.1 kgReliable performance: 12 Ah capacity at a 20-hour discharge rateHigh discharge current: Up to 180 A (5 sec.) for peak loadsLong-lasting: Up to 5 years’ service life at 25 °C in standby modePowerful performance for demanding applicationsThanks to its robust construction and consistent current output, the XP12-12F2 is suitable for a wide range of applications: from safety-critical systems and telecommunications to medical equipment. The Faston connectors (6.3 mm) enable seamless integration into existing setups. Even during short-term load peaks, the battery reliably delivers power with a discharge current of up to 180 A for 5 seconds.Efficient energy and reliable service lifeAGM technology ensures maintenance-free operation and high reliability. With a float life of up to 5 years (at 25 °C), the battery is characterised by low self-discharge of less than 3% per month, meaning it is ready for immediate use even after prolonged storage. It also impresses with good performance at extreme temperatures ranging from -15 °C (charging) to +60 °C (discharging).Technology for industrial and safety-critical applicationsThe XP12-12F2 features a flame-retardant ABS housing (in accordance with UL94-HB/UL94-V0) and complies with international standards such as ISO 9001, ISO 14001 and OHSAS 18001. The charging voltage is 2.25 – 2.30 V/cell (equivalent to 13.5 – 13.8 V) in standby mode and 2.45 – 2.50 V/cell (equivalent to 14.7 – 15.0 V) in cycle mode at an ambient temperature of 25 °C. Automatic temperature compensation of –3 to –4 mV/°C/cell is integrated.Features  ModelXCELL XP12-12F2 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)12 (at a 20-hour rate) Maximum discharge current180A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 100 Weight (kg)approx. 3.6 ConnectionFaston 250 (6.35 mm) CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP12-12F2 lead-acid batteryHow long does the XCELL XP12-12F2 last in standby mode?Under ideal conditions (25 °C ambient temperature), the expected service life in standby mode is up to 5 years.Is the battery VdS-certified?Yes, the battery has VdS approval with the number G120034 and is therefore suitable for safety-critical applications.What temperature range is the battery suitable for?The battery is designed for a charging range of –15 °C to +50 °C and a discharging range of –20 °C to +60 °C.What is the self-discharge rate?At 25 °C, the battery’s self-discharge rate is less than 3 % per month. It is recommended that the battery be recharged if it has been stored for longer than six months.What charging parameters must be observed?For standby operation, the charging voltage is 13.5–13.8 V. In cyclic operation, it should be 14.7–15.0 V. The temperature compensation is –3 mV/°C/cell in standby operation and –4 mV/°C/cell in cyclic operation.For which applications is this battery particularly suitable?It is suitable for photovoltaic systems, UPS systems, emergency lighting, telecommunications and security technology, alarm and hazard warning systems, as well as for hobby and camping use. However, it is not suitable for starting or traction applications.

The PANASONIC CR123A is a high-performance 3-volt lithium primary battery that has been specially developed for devices with high, short-term energy requirements such as cameras and flash units. Based on lithium manganese dioxide technology (Li-MnO2), it offers exceptionally high performance, extremely low self-discharge and a very wide operating temperature range. Supplied in a protective individual blister, it is the ideal power source for demanding photography and other high-tech applications.Highlights at a glanceMaximum performance: Developed for high-tech devices with high and rapid energy requirements (High Drain).Quick flash readiness: Delivers high currents quickly for fast recharging of photo flashes.Extreme longevity: Can be stored for up to 10 years thanks to extremely low self-discharge.Wide temperature range: Reliable performance under extreme conditions from -40 °C to +70 °C.Safe packaging: The protective blister ensures freshness and performance right up to use.Reliable power for photography and high-tech devicesThe PANASONIC CR123A is the preferred power source for a wide range of devices where high performance and absolute reliability are essential. Its primary area of application is in analogue and digital photography for powering cameras and external flash units. It is also ideal for use in high-brightness LED torches, smart home sensors and security technology.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) is the key to the exceptional performance of this cell. It enables a high nominal voltage of 3 volts and can deliver very high currents very quickly. This shortens the recharge time between flashes and ensures constant performance for burst shooting. The extremely low self-discharge guarantees maximum readiness for use even after many years of storage.Developed for maximum reliabilityThe CR123A is manufactured to the highest quality standards to ensure maximum reliability and leak resistance. This protects your valuable and often sensitive equipment from damage. The protective individual blister ensures that the battery retains its full performance until use and can be stored safely from short circuits and external influences. Features  ModelPANASONIC Lithium Photo Battery CR123A (individual blister) TechnologyLithium manganese dioxide (Li-MnO2) Nominal voltage (V)3.0 Capacity (mAh)1400 Dimensions (Ø x H in mm)17.0 x 34.5 Weight (g)ca. 17  FAQs about the PANASONIC lithium battery CR123AWhat is the main advantage of this lithium battery?The key advantage is its ability to deliver very high currents quickly (High Drain), making it ideal for camera flashes and other high-performance applications. This is combined with an extremely long shelf life and a wide temperature range.Is this battery rechargeable?No. This is a lithium primary battery. Under no circumstances should it be attempted to recharge it. Confusing it with similarly looking rechargeable lithium-ion batteries (e.g. RCR123A) is dangerous and can lead to fire or explosion.Why is it called a "photobattery"?One of the main application areas for this type of battery is to power cameras and flash units. The high voltage and the ability to deliver energy quickly are perfectly matched to the requirements of photography.How should this battery be disposed of?Batteries must not be disposed of with household waste. Please take the empty battery to the intended collection points in retail stores or municipal recycling centres to ensure environmentally friendly disposal.

The XCELL XP26-12 is a powerful, maintenance-free 12-volt lead-acid battery with a capacity of 26 Ah (20-hour rate), characterised by its long service life. It has been specially developed for reliable, safety-critical and industrial applications. Thanks to its robust AGM technology and M5 inlay terminals, it delivers a high current output. The battery is also VdS-certified (G115073).Highlights at a glanceVdS approved: G 115073 for safety-related applicationsPowerful performance: 26 Ah capacity at a 20-hour discharge rateHigh current output: Up to 390 A discharge current (5 seconds)Long-lasting: Up to 5 years’ service life in standby mode at 25 °CMaintenance-free: Leak-proof AGM technology (VRLA)Powerful performance for demanding applicationsThe XP26-12 ensures a constant and reliable power supply, even during short-term load peaks, with a discharge current of up to 390 A for 5 seconds. With its compact dimensions (165 × 176 × 127 mm) and low weight of approx. 7.9 kg, it is ideal for mobile devices, emergency power supply systems, telecommunications, safety lighting and other industrial applications.Efficient and long-lasting power supplyAGM technology ensures maintenance-free operation with minimal self-discharge of less than 3% per month at 25 °C. A voltage of 13.60–13.80 V is recommended for continuous operation (float charging), whilst 14.50–14.90 V is ideal for cyclic operation. Integrated temperature compensation ensures the efficiency of the charging power regardless of the ambient temperature. The maximum charging power is 7.8 A.Technology for reliable safetyThe battery is fitted with a flame-retardant casing in accordance with UL94-HB/V0 and complies with international standards such as CE, UL and ISO 9001. The design allows for safe operation over several years in standby mode, provided proper maintenance is carried out and ambient temperature conditions are met. Even under difficult conditions, the battery maintains a stable capacity output, approximately 85% at 0 °C and 65% at –15 °C.Features  ModelXCELL XP26-12 VdS Battery typeVRLA AGM (security technology) Nominal voltage (V)12 Capacity (Ah)26 (at a 20-hour rate) Maximum discharge current390A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 8.6 ConnectionM5 screw connection CertificationsVdS, ISO9001, CE, UL  FAQs on the XCELL XP26-12What is the service life of the XCELL XP26-12 battery?Depending on operating conditions, the float service life is 3 to 5 years at an ambient temperature of 25 °C.What is the XCELL XP26-12 suitable for?The battery is suitable for safety-critical systems (e.g. fire and burglar alarm systems), UPS systems, telecommunications equipment, medical technology and other industrial applications.Is the XCELL XP26-12 battery VdS-certified?Yes, the XCELL XP26-12 holds VdS approval with the number G115073.What is the self-discharge rate?Self-discharge is less than 3% per month at 25 °C.What charging parameters should be observed?A voltage of 13.60 to 13.80 V is recommended for standby operation. In cyclic operation, the voltage is 14.50 to 14.90 V. The maximum charging current should not exceed 7.8 A.Is the battery maintenance-free, leak-proof and usable in any position?Yes, the XP 26‑12 VDS is maintenance-free, sealed, leak-proof and can be operated in any position. 

The VARTA CR2032 is a high-quality 3-volt lithium button cell and the world's most widely used battery for small electronic devices. Based on proven lithium manganese dioxide technology (Li-MnO2), it offers an extremely reliable and long-lasting power supply. Supplied in a protective single blister, it is the ideal choice for a wide range of devices, from computer mainboards to remote controls and medical devices.Highlights at a glanceReliable performance: Constant energy output for the flawless functioning of your electronic devices.Universally applicable: The global standard for a huge variety of applications.Long shelf life: With up to 10 years of shelf life, extremely durable and always ready for use.Wide temperature range: Works reliably even under demanding thermal conditions from -20 °C to +70 °C.Safe packaging: The childproof single blister guarantees freshness and protects the cell until use.Reliable power for compact electronicsThe VARTA CR2032 is the preferred energy source for countless everyday and professional devices where a compact size and absolute reliability are crucial. Its main field of application is buffering BIOS/UEFI settings (CMOS) on computer motherboards. You will also find it in car keys, remote controls, scales, medical devices (e.g. blood glucose meters) and fitness sensors (e.g. heart rate belts).Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) enables a high nominal voltage of 3 volts and extremely low self-discharge of less than 1% per year at room temperature. This guarantees maximum operational readiness even after many years of storage and a very long service life in use. This technology is the key to reliability in maintenance-free "fit and forget" applications.Developed for maximum reliability and safetyThe CR2032 is manufactured to the highest quality standards to ensure maximum reliability and leakage resistance. This protects your valuable electronic devices from damage. The protective and childproof single blister ensures that the battery maintains its full performance until use and can be stored safely from short circuits and external influences.Characteristics                                                                                                                                                          Model              VARTA lithium button cell CR2032 (single blister)               Battery type              Lithium manganese dioxide (Li-MnO2)               Nominal voltage (V)              3.0               Capacity (mAh)              230               Diameter (mm)              20.0               Height (mm)              3.2               Weight (g)              3.0        FAQs about the VARTA lithium battery CR2032What does the designation CR2032 mean?The designation gives information about the properties and size of the cell. "C" stands for the lithium chemistry, "R" for the round design. The numbers "2032" stand for the dimensions: 20.0 mm in diameter and 3.2 mm in height.Is this battery rechargeable?No. This is a primary lithium battery. Under no circumstances should you attempt to recharge it. Attempting to charge is extremely dangerous and can lead to fire or explosion.What is the advantage over alkaline or silver oxide button cells?The main advantage is the high voltage of 3 volts in one cell, while alkaline and silver oxide cells only provide 1.5 or 1.55 volts. In addition, lithium cells offer a significantly longer shelf life, a higher capacity and a broader operating temperature range.How should this battery be disposed of?Batteries must not be disposed of in household waste. Please return the empty battery to the designated collection points in stores or municipal recycling centres to ensure environmentally responsible disposal.

The Yuasa YTX12-BS (often simply referred to as YTX12 listed when filled at the factory) is one of the most frequently installed standard types for motorbikes worldwide. It is the "big brother" of the YTX9-BS and, with approx. 10 Ah (10h) or 10.5 Ah (20h) and 180 A cold start current, offers the ideal balance of size and performance for medium to heavy motorbikes (600cc to 1200cc). It is used in countless naked bikes, sports bikes and enduro bikes from Kawasaki, Suzuki, Triumph, Aprilia and Honda.Highlights at a glanceThe bestseller: One of the most popular battery sizes ever (150 x 87 x 130 mm), installed in millions of vehicles such as Kawasaki Z750/Z1000, Suzuki V-Strom 650 or Triumph Bonneville.AGM technology: The acid is bound in the glass fleece (Absorbent Glass Mat), which makes the battery leak-proof (up to 45° inclination) and very vibration-resistant.Solid starting power: With 180 A (EN) cold start current, it reliably starts multi-cylinder engines even in cooler temperatures.Maintenance-free: Thanks to VRLA technology (valve regulated), the system is hermetically sealed after initial filling and sealing; no water loss, no topping up.Long service life: The robust Yuasa construction with sulphation brake ensures above-average durability when the battery is maintained in winter.YTX12 vs. YTX12-BS: Technically identical. "BS" means that the acid pack is supplied separately (dry pre-charged), while "YTX12" (without BS) is often the designation for the factory-filled version.The all-rounder for Kawasaki, Suzuki & Co.The YTX12-BS is the standard for the middle and upper class. It fits into the battery box of the Kawasaki Z-series (Z750, Z800, Z1000, ZX-10R), the Suzuki DL 650 V-Strom and SV 650 (older models), the Triumph Street Triple / Speed Triple (many years of construction), the Aprilia RSV 1000 or the Honda CBR 1100 XX Blackbird. It offers sufficient reserves for injection systems and ABS systems of this generation. Features ModelYuasa YTX12-BS (High Performance MF) ApplicationMotorbike & scooter (universal size - Vespa GTS, Kawasaki, Triumph) TechnologyAGM (VRLA) - Dry pre-charged (incl. acid pack) Voltage12 V Capacity10 Ah (10 hours) / 10.5 Ah (20 hours) Cold start current (CCA)180 A (EN) Dimensions (L x W x H in mm)150 x 87 x 130 Pole arrangement1 (positive pole left) Connection terminalType 5 (front/top mounting) Bottom barN (No base plate) Special featuresTilt-proof up to 45° (after filling), maintenance-free, bestseller Weight (kg)approx. 4.2 (filled)  FAQs about the Yuasa YTX12-BSWhat is the difference to the YT12A-BS and YT12B-BS?This is extremely important, as all three batteries are called "12" but have completely different dimensions!YTX12-BS (your battery): 150 x 87 x 130 mm (standard "thick & high").YT12A-BS: 150 x 87 x 105 mm (flatter, e.g. Suzuki GSX-R).YT12B-BS: 150 x 69 x 130 mm (narrower, e.g. Ducati). The YTX12-BS fits not in motorbikes built for the smaller A or B types.What is the difference to the YTX14-BS?The YTX14-BS has the same footprint (150x87 mm), but is higher (145 mm instead of 130 mm).If you have space above (approx. 1.5 cm), you can theoretically upgrade to the more powerful YTX14-BS (more starting current).However, if the seat is a tight fit (which is usually the case), only the YTX12-BS will fit.Do I need to charge the battery before installation?With the BS version (acid pack included): Yes. After filling with acid, the battery has approx. 75-80% charge. For maximum service life, you should always bring it to 100% with a charger ("top-up charge") before starting the engine for the first time. With the factory-filled version (YTX12): Measure the voltage. If it is below 12.6 V, you should recharge.Can I install this battery horizontally?The YTX12-BS is designed for the standing installation (vertical). It is safe up to a certain angle of inclination, but for completely horizontal installation (90°) many manufacturers recommend the "Factory Activated" (factory-filled) versions (often labelled "WC") or special gel/lithium batteries to be 100% sure that no error has occurred during activation.