Luminaires

This high-quality escape sign luminaire from Beltrona has been specially developed for direct wall mounting and connection to central battery systems (CPS). It ensures a clear and compliant indication of escape and rescue routes. With a standard-compliant detection range of 27 metres, durable LED technology and a comprehensive pictogram set included, this luminaire offers maximum flexibility and safety for professional installations in centrally supplied buildings.Highlights at a glanceCentral battery compatible: Developed for direct connection to 230V AC/DC central and group battery systems (ZB / CPS).Clear visibility: Ensures a standard-compliant detection range of 27 metres in accordance with EN 1838.Optimised for wall mounting: Ideal for installation above doors, at corridor ends and in stairwells.Flexible pictogram set: A set with 4 directional pictograms and a blank film are included.Durable LED technology: High efficiency, long service life and minimal maintenance effort.Clear labelling of escape routesThis escape sign luminaire is the ideal solution for compliant safety signage in a wide range of properties equipped with a central emergency power system. Direct wall mounting is the conventional installation method for marking exits or at the end of escape routes where clear directional guidance is required. It is perfectly suited for use in office buildings, retail stores, schools, hospitals and industrial halls.Advanced and efficient LED technologyThe core of the luminaire is a modern LED module that ensures bright and absolutely uniform illumination of the pictogram. Compared to older fluorescent lamps, LED technology offers a significantly longer service life of up to 50,000 hours and immediate, full brightness in an emergency. This significantly reduces operating costs and maintenance effort over the entire service life of the building.Designed for easy installation and centralised maintenanceThe luminaire is designed for rapid and fault-free installation by a professional installer. Connection to the central battery system is via an easily accessible terminal. In a central system, each individual luminaire is permanently monitored via the supply line. Any failure of the light source is immediately detected and reported by the central control unit, which significantly simplifies maintenance compared to single battery luminaires and increases operational safety. Features  ModelBeltrona LED escape sign luminaire (central battery) ApplicationEscape route marking Mounting typeWall surface mounting Connection toCentral battery systems Operating voltage24V - 230V AC/DC Power consumption (W)approx. 2.5 Detection range (m)approx. 20 Light sourceLED strip (integrated) Pictogram setIncluded (arrow left/right/down) Dimensions (W x H x D in mm)approx. 260 x 180 x 45  FAQs on the escape sign luminaireWhat does "ZB" or "central battery" mean?"ZB" stands for central battery. This means this luminaire does not have its own battery, but is supplied from a central emergency power supply system (also known as CPS) in the building. This simplifies maintenance as the batteries are grouped at a single location.What does "detection range 27m" mean?The detection range is the maximum distance from which an escape sign can still be clearly recognised and read as such. It is determined by the height of the pictogram and is specified in standard EN 1838. A detection range of 27 metres is a common standard value for many applications.What is the blank film used for?The blank film (or dummy film) serves as a placeholder or can be used to cover one side of a luminaire if required. In some cases, it is also used as an indicator luminaire without a specific direction to generally mark an emergency exit.Can the luminaire be operated in permanent and standby mode?Yes. The switching type (permanent operation/DS or standby operation/BS) for the escape sign luminaire is set centrally in the emergency power system for the relevant circuit and can be reprogrammed if necessary. According to most building regulations, escape sign luminaires must be operated in permanent operation.

This high-quality escape sign luminaire from Beltrona has been specially developed for wall bracket mounting and connection to central battery systems (CPS). It ensures clear and double-sided marking of escape and rescue routes. The luminaire combines an elegant, functional design with durable LED technology and a comprehensive pictogram set to ensure maximum flexibility and safety in professional, centrally powered building projects.Highlights at a glanceCentral battery compatible: Developed for direct connection to 230V AC/DC central and group battery systems (ZB / CPS).Wall bracket mounting: Ideal for installation visible from both sides in long corridors, passages and large rooms.Clear visibility: Ensures a standard-compliant recognition distance of 27 metres according to EN 1838.Flexible pictogram set: A set of standard pictograms is included in the scope of delivery.Durable LED technology: High efficiency, long service life and minimal maintenance effort.Clear marking of escape routesThis escape sign luminaire is the ideal solution for compliant safety signage in a wide variety of buildings. The wall bracket mounting, where the luminaire is perpendicular to the wall, ensures excellent visibility from both directions in corridors and passageways. It is perfectly suited for use in office buildings, retail outlets, schools, hospitals and industrial halls equipped with a central emergency power system.Advanced and efficient LED technologyAt the heart of the luminaire is a modern LED module that ensures bright and absolutely uniform illumination of the pictogram. Compared to older fluorescent lamps, LED technology offers a significantly longer lifetime of up to 50,000 hours and instant full brightness in an emergency. This significantly reduces operating costs and maintenance effort over the entire service life of the building.Developed for easy installation and central maintenanceThe luminaire is designed for quick and error-free installation by a professional. Connection to the central battery system is via an easily accessible terminal. In a centralised system, each individual luminaire is permanently monitored via the supply line. Any failure of the light source is immediately detected and reported by the central control unit, which makes maintenance much easier compared to single-battery luminaires and increases operational reliability. Features  ModelBeltrona LED escape sign luminaire (wall bracket, central battery) ApplicationEscape route marking Mounting typeWall bracket mounting Connection toCentral battery systems Operating voltage24V - 230V AC/DC Power consumption (W)approx. 3.5 Recognition distance (m)approx. 25 Light sourceLED strip (integrated) Pictogram setIncluded (arrow left/right/down) Housing materialAluminium / acrylic glass  FAQs on the escape sign luminaireWhat does "wall bracket mounting" mean?With this type of installation, the luminaire is attached vertically to the wall with a bracket (a holder). As a result, the pictogram panel projects into the room and is clearly visible from both sides, which is ideal for long corridors.What is the advantage of a central battery system ("ZB")?Central battery systems (CPS) simplify the maintenance and monitoring of the entire emergency lighting system. All batteries are located in a central location, and the regular function tests can be automated and centrally logged. In large buildings, this is much more efficient than maintaining hundreds of individual batteries in the luminaires themselves.What does "recognition distance 27m" mean?The recognition distance is the maximum distance from which an escape sign can still be clearly recognised and read as such. It is determined by the height of the pictogram and is specified in the EN 1838 standard. A recognition distance of 27 metres is a common standard value for many areas of application.Can the luminaire be operated in continuous and standby mode?Yes. The switching mode (permanent operation/DS or standby operation/BS) for the escape sign luminaire is defined centrally in the emergency power system for the respective circuit and can be reprogrammed if necessary. According to most building regulations, escape sign luminaires must be operated in permanent operation.

This high-quality emergency luminaire from Beltrona has been specially developed for surface-mount ceiling installation and connection to central battery systems (CPS). It ensures reliable and standard-compliant emergency lighting in case of power failure. The luminaire combines a functional, robust design with modern LED technology, centralised monitoring, and optimised lenses for illuminating escape routes or anti-panic areas.Highlights at a glanceCentral battery compatible: Designed for direct connection to 230V AC/DC central and group battery systems (ZB / CPS).Simple surface mounting: Ideal for direct installation on solid ceilings or in areas without suspended ceiling construction.Centralised monitoring: Enables easy and efficient monitoring of luminaire function via the central battery system.Durable LED technology: High efficiency, long service life, and minimal maintenance.Optimised illumination: Interchangeable lenses for demand-oriented escape route or anti-panic lighting.Reliable illumination in an emergencyThis emergency luminaire is the ideal solution for regulation-compliant emergency lighting in a wide variety of properties. Surface-mounted ceiling installation is perfect for use in corridors, stairwells, offices, shops, schools, and hospitals equipped with a central emergency power system. It ensures that in an emergency, escape and rescue routes are clearly visible and panic in larger areas is avoided by sufficient illuminance.Advanced and efficient LED technologyAt the heart of the luminaire is a modern LED module that ensures high luminous efficiency with minimal energy consumption. Compared to older fluorescent lamps, LED technology offers a noticeably longer life of up to 50,000 hours and immediate, full brightness in an emergency. This greatly reduces operating costs and maintenance over the lifetime of the building.Designed for easy installation and centralised maintenanceThe luminaire is designed for fast and error-free installation by a specialist installer. Connection to the central battery system is via an easily accessible terminal. In a central system, each individual luminaire is permanently monitored via the supply line. Failure of the light source is immediately detected and reported by the central control unit, which significantly simplifies maintenance compared to individual battery luminaires and increases operational reliability. Characteristics  ModelBeltrona LED emergency luminaire (surface ceiling mount, central battery) ApplicationEscape route & anti-panic lighting Mounting typeSurface-mounted ceiling installation Connection toCentral battery systems Operating voltage24V - 230V AC/DC Power consumption (W)approx. 3.0 Luminous flux (lumen)approx. 200 Light sourceLED (integrated) Degree of protectionIP40 Dimensions (Ø x H in mm)approx. 120 x 45  FAQs about the emergency luminaireWhat is the difference between escape route lighting and anti-panic lighting?The escape route lighting uses a special lens to illuminate a long, narrow corridor, thereby clearly defining the course of the escape route. The anti-panic lighting uses a wide, rotationally symmetrical lens to evenly illuminate large, open areas (e.g. foyers, conference rooms), thereby making orientation easier and preventing panic.What is the advantage of a central battery system (“ZB”)?Central battery systems (CPS) simplify the maintenance and monitoring of the entire emergency lighting system. All batteries are located in a central place, and regular functional tests can be automated and centrally logged. In large buildings, this is much more efficient than servicing hundreds of individual batteries in each luminaire separately.Can the luminaire be operated in both continuous and standby switching?Yes. The switching mode (continuous switching/DS or standby switching/BS) for the emergency luminaire is set centrally in the emergency power system for the relevant circuit and can be reprogrammed as required.How is the luminaire monitored?Monitoring is centralised. If a light source fails or another fault occurs in the luminaire circuit, this is immediately detected by the central control unit, specifically assigned and reported as a malfunction. This allows rapid and targeted troubleshooting.

This robust LED emergency light from Beltrona has been specially developed for chain or wire suspension in high spaces such as industrial and warehouse halls and for connection to central battery systems (CPS). The luminaire combines a resilient housing with a high protection rating, modern LED technology, central monitoring and optimised lenses to ensure standard-compliant safety lighting even from great heights.Highlights at a glanceCentral battery compatible: Developed for direct connection to 230V AC/DC central and group battery systems (ZB / CPS).Flexible chain mounting: Ideal for installation in industrial halls, warehouses, supermarkets and other buildings with high ceilings.Central monitoring: Enables simple and efficient monitoring of the luminaire’s function via the central battery system.High protection rating: Robust housing (e.g. IP65) to protect against dust and water jets, suitable for demanding environments.Optimised for great heights: Powerful LEDs and special lenses for effective escape route or anti-panic lighting.Reliable illumination in demanding environmentsThis emergency luminaire is the ideal solution for compliant safety lighting in spacious and high parts of buildings. Chain mounting allows the luminaire to be suspended from high ceilings or supporting structures to the correct height according to standards. It is perfect for use in manufacturing facilities, logistics centres, DIY superstores and sports halls equipped with a central emergency power system, which enables easy maintenance and monitoring of the entire installation.Advanced and efficient LED technologyAt the heart of the luminaire is a cutting-edge LED module that ensures maximum luminous efficiency with minimal energy consumption. In combination with the specially developed lenses, the powerful LEDs guarantee that, even when mounted at heights of over 10 metres, sufficient illuminance is achieved at floor level. The long lifetime of the LEDs of up to 50,000 hours significantly minimises the need for maintenance.Developed for easy installation and central maintenanceThe luminaire is designed for quick and error-free installation by the professional tradesperson. Mounting is via robust eyelets for chain suspension, and electrical connection to the central battery system is via an easily accessible terminal. In a central system, each luminaire is permanently monitored over the supply line. A failure of the light source is immediately detected and reported by the central control unit, making maintenance particularly easy for high-mounted areas. Features  ModelBeltrona LED emergency luminaire (chain mounting, central battery) ApplicationHall & escape route lighting Mounting typeChain suspension Connection toCentral battery systems Operating voltage24V - 230V AC/DC Power consumption (W)approx. 5.0 Luminous flux (Lumen)approx. 500 Light sourceLED (integrated) Protection ratingIP65 Dimensions (L x W x H in mm)approx. 300 x 150 x 80  FAQs about the emergency luminaireWhen is chain mounting required?Chain or cable mounting is used whenever the structural ceiling is very high (e.g. in industrial or warehouse halls) and the luminaire needs to be positioned closer to the floor in order to achieve the lighting level required by standards for escape routes or work areas.What does protection rating IP65 mean?The IP65 protection rating indicates that the luminaire is “dust-tight” (first digit 6) and protected against “water jets” from any angle (second digit 5). This makes it ideal for use in tough, damp or dusty environments such as industrial halls, workshops or covered outdoor areas.What is the advantage of a central battery system (“ZB”) in large halls?In large and high halls, maintaining single-battery luminaires is very elaborate because each luminaire must be reached individually. With a central battery system, all batteries are located in a single, easily accessible place. Monitoring the hard-to-reach luminaires is automatic and central, drastically reducing maintenance effort and operating costs.Can the luminaire be operated in permanent and standby mode?Yes. The switching type (permanent switching/DS or standby switching/BS) for the emergency luminaire is defined centrally in the emergency power system for the respective circuit and can be reprogrammed if required.

This elegant LED emergency luminaire from Beltrona has been specially developed for pendant mounting and connection to central battery systems (CPS) and is ideal for architecturally sophisticated rooms with high ceilings. The luminaire combines a minimalist design with modern LED technology, central monitoring and optimised lenses to ensure standard-compliant yet aesthetic emergency lighting.Highlights at a glanceCentral battery compatible: Developed for direct connection to 230V AC/DC central and group battery systems (ZB / CPS).Elegant pendant mounting: Ideal for installation in prestigious areas, foyers, sales rooms and halls with high ceilings.Centralised monitoring: Enables simple and efficient monitoring of the luminaire function via the central battery system.Long-life LED technology: High efficiency, long service life and minimal maintenance.Optimised illumination: Interchangeable lenses for escape route or anti-panic lighting as required.Reliable illumination in demanding environmentsThis emergency luminaire is the ideal solution for compliant emergency lighting in a wide range of properties where both aesthetics and function play a role. The pendant mounting makes it possible to suspend the luminaire from high ceilings to the correct standardised height in order to achieve optimum light distribution. It is perfect for use in entrance halls, museums, modern office complexes, airports and retail spaces that have a centralised emergency power system.Advanced and efficient LED technologyThe centrepiece of the luminaire is a state-of-the-art LED module that ensures maximum luminous efficacy with minimum energy consumption. In combination with the specially developed lenses, the powerful LEDs guarantee that sufficient illuminance is achieved on the ground even from great heights. The long service life of the LEDs of up to 50,000 hours minimises maintenance requirements considerably.Developed for easy installation and centralised maintenanceThe luminaire is designed for quick and error-free installation by the installer. It is mounted using a sturdy pendant tube or wire suspension, and the electrical connection to the central battery system is made via an easily accessible terminal. In a centralised system, each individual luminaire is permanently monitored via the supply line. Any failure of the light source is immediately detected and signalled by the central control unit, which simplifies maintenance, especially in high-mounted areas. Features  ModelBeltrona LED emergency luminaire (pendant mounting, central battery) ApplicationEscape route & anti-panic lighting Mounting typePendant mounting Connection toCentral battery systems Operating voltage24V - 230V AC/DC Power consumption (W)approx. 3.0 Luminous flux (lumen)approx. 250 Light sourceLED (integrated) Protection classIP40 Dimensions (Ø x H in mm)approx. 80 x 150  FAQs about the emergency luminaireWhen does pendant mounting make sense?Pendant mounting is always used when the structural ceiling is very high (e.g. in foyers, halls) and the luminaire needs to be positioned closer to the floor in order to achieve the illuminance required by standards. It is also chosen for architectural reasons in order to integrate the luminaire as a conscious design element.What is the advantage of a central battery system ("ZB") in high rooms?In high and often difficult to access areas, a central battery system simplifies maintenance enormously. Instead of having to reach each individual luminaire using a lifting platform to check or replace the battery, the entire battery system is located in a central, easily accessible location. The luminaires themselves are then virtually maintenance-free.What is the difference between escape route lighting and anti-panic lighting?The escape route lighting uses a special lens to illuminate a long, narrow corridor and thus clearly define the course of the escape route. The anti-panic lighting uses a wide, rotationally symmetrical lens to evenly illuminate large, open areas, making orientation easier and helping to prevent panic.Can the luminaire be operated in permanent and standby mode?Yes. The switching mode (permanent switching/DS or standby switching/BS) for the emergency luminaire is set centrally in the emergency power system for the respective circuit and can be reprogrammed if required.

This high-quality emergency luminaire from Beltrona has been specially developed for discreet installation in suspended ceilings and connection to central battery systems (CPS). It ensures reliable and standard-compliant emergency lighting in the event of a power failure. The luminaire combines an unobtrusive design with modern LED technology, central monitoring, and optimised lenses for the illumination of escape routes or anti-panic areas.Highlights at a glanceCentral battery compatible: Developed for direct connection to 230V AC/DC central and group battery systems (ZB / CPS).Discreet recessed mounting: Ideal for seamless and architecturally appealing installation in grid or plasterboard ceilings.Central monitoring: Enables simple and efficient monitoring of the luminaire function via the central battery system.Durable LED technology: High efficiency, long service life and minimal maintenance requirements.Optimised illumination: Interchangeable lenses for needs-based escape route or anti-panic lighting.Reliable illumination in an emergencyThis emergency luminaire is the ideal solution for compliant emergency lighting in a wide range of buildings. The recessed ceiling mounting is perfect for use in corridors, offices, retail outlets, schools and hospitals. It ensures that in an emergency escape and rescue routes are clearly recognisable and that panic in larger areas is avoided thanks to sufficient illuminance, without disturbing the overall architectural appearance.Advanced and efficient LED technologyAt the heart of the luminaire is a modern LED module that ensures a high luminous flux with minimum power consumption. Compared to older fluorescent lamps, the LED technology offers a much longer service life of up to 50,000 hours and immediate, full brightness in the event of an emergency. This significantly reduces operating costs and maintenance requirements over the entire service life of the building.Developed for easy installation and central maintenanceThe luminaire is designed for fast and fault-free installation by the specialist in standard ceiling cut-outs. The connection to the central battery system is made via an easily accessible terminal. In a central system, each individual luminaire is permanently monitored via the supply line. Any failure of the light source is immediately detected and reported by the central control unit, which significantly simplifies maintenance compared to single-battery luminaires and increases operational safety. Features  ModelBeltrona LED emergency luminaire (recessed ceiling, central battery) ApplicationEscape route & anti-panic lighting Mounting typeRecessed ceiling Connection toCentral battery systems Operating voltage24V - 230V AC/DC Power consumption (W)approx. 1.5 Luminous flux (lumens)approx. 180 Light sourceLED (integrated) Protection ratingIP20 Installation diameter (mm)approx. Ø 75  FAQs about the emergency luminaireWhat is the difference between escape route and anti-panic lighting?The escape route lighting uses a special lens to illuminate a long, narrow corridor and thus clearly defines the escape route. The anti-panic lighting uses a wide, rotationally symmetrical lens to evenly illuminate large, open areas (e.g., foyers, conference rooms), making orientation easier and avoiding panic.What is the advantage of a central battery system ("ZB")?Central battery systems (CPS) simplify the maintenance and monitoring of the entire emergency lighting system. All batteries are located in one central location, and regular function tests can be automated and centrally logged. This is significantly more efficient in large buildings than maintaining hundreds of individual batteries in the luminaires themselves.Can the luminaire be operated in permanent and standby mode?Yes. The type of switching (permanent switching/DS or standby switching/BS) for the emergency luminaire is defined centrally in the emergency power system for the respective circuit and can be reprogrammed if necessary.How is the luminaire monitored?Monitoring is central. If a light source fails or there is another fault in the luminaire circuit, this is immediately detected, specifically assigned and reported as a fault by the central control unit. This enables fast and targeted troubleshooting.

This ceiling-mounted emergency light is a high-quality and robust safety luminaire, specially designed for connection to central battery systems (CPS). With its modern design and flexible suspension, it is ideal for the compliant illumination of escape routes and for anti-panic lighting in high rooms. The luminaire combines long-lasting LED technology with easy installation, thus ensuring maximum safety and reliability in emergencies.Highlights at a glanceCentral battery compatible: Designed for direct connection to 230V AC/DC central and group battery systems.Flexible installation: Suitable for direct ceiling mounting or suspended installation in rooms with high ceilings.Optimised illumination: Interchangeable lenses for need-based escape route or anti-panic lighting.Long-lasting LED technology: High efficiency, long lifespan (e.g. 50,000 hours) and minimal maintenance.High quality: Robust housing and compliance with all relevant European standards for emergency lighting.Reliable emergency lighting for professional propertiesThis emergency luminaire is the ideal solution for a variety of professional building projects where a central emergency power supply is in use. It is perfectly suited for use in office buildings, retail outlets, schools, hospitals, industrial halls and underground garages. The possibility of suspended installation makes it especially valuable for areas with high ceilings, such as entrance halls, storage rooms or production facilities where near-floor illumination must be ensured.Advanced and efficient LED technologyAt the heart of the luminaire is a modern LED module that ensures high luminous efficacy with minimal energy consumption. Compared to older fluorescent lamps, LED technology offers a significantly longer service life, higher switching stability and instant, full brightness in an emergency. This considerably reduces operating costs and maintenance requirements over the entire building's lifecycle.Developed for easy installation and maintenanceThe luminaire is designed for fast and error-free installation by the professional. Connection to the central battery unit is via an easily accessible terminal. The luminaire is permanently monitored and, in the event of a fault, reported by the central system. Replaceable lens optics allow flexible adaptation to the room situation on site to achieve compliant illumination in accordance with EN 1838. Features  ModelCeiling-mounted emergency luminaire with suspension ApplicationEscape route lighting Mounting typeCeiling surface-mount / ceiling suspension Connection toCentral battery systems Operating voltage24V - 230V AC/DC Power consumption (W)approx. 3.0 Light sourceLED (integrated) Luminous flux (Lumen)approx. 250 Protection ratingIP40 Dimensions (L x W x H in mm)approx. 300 x 60 x 45 Suspension length (mm)approx. 1000  FAQs on the emergency luminaire for central battery systemsWhat is the advantage of a central battery system compared to a luminaire with a single battery?Central battery systems (CPS) significantly simplify the maintenance and monitoring of the whole emergency lighting system. All batteries are located in one central, easily accessible place. Regular function tests can be automated and logged centrally. This is especially more efficient and often more economical in large buildings than maintaining hundreds of individual batteries in each luminaire.What are different lenses needed for?Different areas within a building require different lighting patterns. An escape route lens produces a long, narrow light corridor to optimally illuminate escape routes. An anti-panic lens produces a wide, square light distribution to evenly illuminate large, open spaces like foyers or halls and to prevent panic.What does "suspension" mean?"Suspension" means that the luminaire is not mounted directly to the ceiling, but is suspended from the ceiling using rods or cables. This is necessary when the structural ceiling is very high (e.g. industrial halls), but the required illumination level at floor level must still be achieved as per standards.How is the luminaire monitored?In a central battery system, each individual luminaire is permanently monitored via the supply line. If a light source fails or there is another fault, this is immediately detected by the central control unit and reported as a malfunction. This ensures high operational reliability of the entire system.

The M16 light module M72 is a self-sufficient and highly flexible lighting unit that has been developed for professional integration into furniture, machines and mobile systems. It combines an intelligent control board (M72), a long-life lithium iron phosphate (LiFePO4) battery and a high-intensity LED strip to create a compact and ready-to-install complete solution. Thanks to the versatile mounting options (except wall mounting), the module is perfect as low-maintenance cabinet lighting, machine lighting or safety lighting.Highlights at a glanceSelf-sufficient complete solution: Integrated unit consisting of control, high-performance battery and LED strip.Long-life LiFePO4 technology: Offers maximum cycle stability, long service life and maximum operational safety.Flexible mounting options: Suitable for installation, assembly and integration into various materials and objects.High light output: Modern LED technology for bright and even illumination.Low-maintenance operation: The robust LFP battery technology ensures reliable operation for years without battery replacement.Versatile lighting for professional applicationsThe M16 light module is designed as a versatile "fit-and-forget" solution. It is ideal for use as interior lighting in high-quality cabinets, showcases and sales displays where wireless installation is required. In industry, it serves as a status indicator or maintenance-free workplace lighting directly on machines. Other applications can be found in motorhomes, boats or as emergency lighting in technical installations that require a light source independent of the main power supply.Superior and safe LiFePO4 battery technologyThe heart of the module is the integrated lithium iron phosphate (LiFePO4) battery. This battery technology is considered the safest and most durable in the lithium-ion sector. It offers an extremely high number of charge and discharge cycles (several thousand), is thermally stable and intrinsically safe, minimising the risk of fire. Compared to conventional lithium or lead batteries, it offers a significantly longer service life and more reliable operation.Developed for seamless integrationThe M72 control board manages the charging and discharging process of the battery and ensures efficient operation of the LED strip. The entire module is designed for easy integration. It can be embedded in cut-outs, screwed onto surfaces or fastened with retaining clips. The compact design and self-sufficient power supply enable clean, cable-free installation in a wide range of demanding projects. Features  ModelM16 light module M72 General module data ApplicationEmergency lighting, signal light Protection classIP67 Dimensions (L x W x H in mm)approx. 250 x 50 x 30 Weight (g)approx. 450 Integrated battery TechnologyLiFePO4 Rated voltage (V)12.8 Capacity (Ah)2.5 ProtectionIntegrated BMS LED strip Light colourNeutral white (4000K) Luminous flux (lumen)approx. 300  FAQs about the M16 light module M72What does "self-sufficient complete solution" mean?Self-sufficient means that the light module already contains all the necessary components for operation (control, battery, light) and can be operated independently of a permanent external power supply. The integrated battery is charged as required and supplies the LEDs.Why is a LiFePO4 battery used?Lithium iron phosphate (LFP/LiFePO4) is the safest lithium-ion technology. It is extremely cycle-resistant (durable), thermally stable (no "thermal runaway") and does not require rare raw materials such as cobalt. It is the ideal choice for fixed, low-maintenance systems such as this module.What does "all mounting types except wall mounting" mean?This means that the module is designed for integration in or on objects. Typical examples are milling into a wooden panel (installation), screwing onto machine panelling (surface mounting) or fixing with clips in a profile (integration). It is not intended as a stand-alone luminaire mounted on a building wall.How is the module charged?The module is charged via a dedicated charging port with a suitable power supply unit or charging circuit. The exact specifications for the charging voltage and charging current are defined in the technical data sheet of the product. The integrated M72 board controls and protects the charging process.

This recessed ceiling emergency light is a modern and technologically advanced safety light, designed for a discreet and seamless integration into suspended ceilings. It combines long-life LED technology with a highly safe lithium iron phosphate (LiFePO4) battery with 3.2V and 1.5Ah, ensuring maximum safety and reliability in an emergency. Thanks to the integrated single-battery system with auto-test function, it is the ideal, low-maintenance solution for professional construction projects.Highlights at a glanceSingle battery system: Integrated 3.2V LiFePO4 battery for self-sufficient operation of up to 3 hours.Long-life LiFePO4 technology: Offers maximum cycle stability, long service life (up to 8 years) and maximum operational safety.Discreet recessed mounting: For unobtrusive and architecturally appealing installation in grid or plasterboard ceilings.Automatic test function: Carries out regular self-tests and indicates the status via an LED, which simplifies maintenance.Optimised illumination: Interchangeable lenses for demand-oriented escape route or anti-panic lighting.Reliable emergency lighting for professional propertiesThis emergency light is the ideal solution for a wide range of professional construction projects that prefer decentralised emergency power supply. It is perfect for installation in office buildings, sales outlets, schools, hospitals and corridors. The unobtrusive integration into the ceiling construction makes it the first choice for architects and planners who value a clear and calm ceiling design without compromising on safety.Superior and safe LiFePO4 battery technologyAt the heart of the self-sufficient supply is the integrated lithium iron phosphate (LiFePO4) battery. This modern battery technology is considered the safest and most durable in the lithium-ion range. It offers an extremely high number of charge and discharge cycles, is thermally stable and intrinsically safe, which minimises the risk of fire. Compared to conventional NiCd batteries, it offers a significantly longer service life, higher efficiency and better environmental compatibility.Designed for easy installation and minimised maintenanceThe light is designed for quick and error-free installation by the professional tradesperson in ceiling cut-outs. The automatic test function (autotest) automatically checks the function of the light source and battery at regular intervals and signals the status via a multicoloured LED. This greatly reduces the manual testing effort and lowers operating costs over the entire lifetime of the building. Features  ModelRecessed ceiling emergency light (single battery) General luminaire data ApplicationEscape route lighting Mounting typeCeiling recessed Operating modeContinuous / standby mode Light sourceHigh-power LED (integrated) Luminous flux (lumen)approx. 150 Installation diameter (mm)approx. Ø 70 Integrated battery TechnologyLiFePO4 Rated voltage (V)3.2 Capacity (Ah)1.5 Autonomy time (h)3  FAQs on the single-battery emergency light with LiFePO4 batteryWhat is the advantage of a LiFePO4 battery in an emergency light?Lithium iron phosphate (LFP/LiFePO4) is the safest lithium-ion technology. It is extremely cycle-resistant, which allows a very long service life of up to 8 years and halves the replacement intervals compared to old NiCd batteries (approx. 4 years). It is also more environmentally friendly as it contains no heavy metals such as cadmium.What does "Autotest" function mean?The light automatically performs the legally required function tests (e.g. weekly short test, annual endurance test). The result is displayed directly on the luminaire via a status LED. This saves the operator the time-consuming manual testing of each individual light and ensures complete documentation of operational readiness.Can the light be operated in continuous and standby mode?Yes, modern single-battery lights like these are generally suitable for both modes of operation. In the standby mode (BS) the light only switches on in the event of a power failure. In the continuous mode (DS) it remains permanently lit and serves, for example, as part of the general lighting in normal operation.What are different lenses needed for?Different areas in a building require different lighting patterns. An escape route lens creates a long, narrow light corridor to optimally illuminate escape routes. An anti-panic lens creates a wide, square light distribution to evenly illuminate large, open areas such as foyers or halls and prevent panic.