Low volt
Deye WALLBOX SUN-EVSE22K01-EU-AC 22 kW Smart EV Charger
Deye’s SUN-EVSE22K01-EU-AC Smart Wallbox enables smart, safe and highly efficient charging of electric and plug-in hybrid vehicles directly at home or in a commercial setting. With a charging power of up to 22 kW via a three-phase connection, it charges a compatible vehicle significantly faster than a conventional domestic socket.Thanks to its smart integration into existing Deye energy systems, the wallbox can be powered specifically using self-generated solar power. Various charging modes, control via the Deye Cloud app and modern communication interfaces make the SUN-EVSE22K01-EU-AC a flexible charging solution for efficient energy management.Your benefits at a glanceUp to 22 kW charging powerWith a three-phase connection, the wallbox provides a charging power of up to 22 kW. In single-phase operation, up to 7 kW is possible. This allows compatible electric vehicles to be charged much faster than from a conventional socket.Smart app controlThe Deye Cloud App allows you to conveniently monitor and schedule charging sessions via your smartphone. This enables flexible management of charging times, operating modes and energy consumption.PV-optimised chargingWhen used in conjunction with a compatible Deye energy system, the wallbox can prioritise charging when the photovoltaic system is producing surplus solar power. This increases self-consumption and reduces the amount of electricity purchased from the grid at a cost.Comprehensive safety featuresAn integrated 6 mA DC fault current detection system, together with protection functions against overvoltage, undervoltage, overload, short circuit, earth fault and overtemperature, ensures safe and reliable charging operation.Robust housing for indoor and outdoor useWith an IP66 protection rating, the wallbox is dust-tight and protected against powerful water jets. It is therefore suitable for installation in garages, carports and suitable outdoor areas.Standardised Type-2 connectionThe integrated Type-2 charging cable allows connection to numerous electric and plug-in hybrid vehicles commonly used in Europe. The vehicle can be connected directly to the wallbox without the need for a separate charging cable.Smart energy management for your homeThe Deye SUN-EVSE22K01-EU-AC is more than just a standard charging station. Thanks to its smart communication with compatible Deye components, it can be integrated into the home’s energy management system. The charging power can be adjusted to suit the available energy and the selected operating mode.In addition to direct Plug-&-Play charging, the wallbox supports scheduled charging and a solar-priority mode. This allows the electric vehicle to be charged specifically at off-peak times or using surplus PV energy. The LED status indicator provides continuous updates on the current operating status.Communication and controlThe wallbox features Wi-Fi, Bluetooth Low Energy and LoRa. This allows it to be integrated into both a local network and a compatible Deye energy system. Supported communication protocols such as OCPP 1.6 and Modbus TCP facilitate integration into suitable charging and energy management systems.Technical Specifications ModelDeye SUN-EVSE22K01-EU-AC Device typeSmart AC Wallbox Rated power22 kW three-phase / 7 kW single-phase Rated voltage400 V AC three-phase / 230 V AC single-phase Rated current32 A Frequency50 / 60 Hz Connection type3L+N+PE three-phase / L+N+PE single-phase Charging plugIntegrated Type-2 charging cable Cable lengthapprox. 4.2 m, up to 5 m depending on the model CommunicationWi-Fi / BLE / LoRa ProtocolsOCPP 1.6 / Modbus TCP Charging modesPlug & Play, time-controlled charging, solar priority App supportDeye Cloud app DisplayLED status indicator DC fault current detection6 mA integrated Protection functionsOVP, UVP, OLP, SCP, earth fault protection and overtemperature protection Surge protectionType II integrated Protection ratingIP66 Operating temperature-40 °C to +55 °C Permissible humidity5 % to 95 %, non-condensing Dimensions104 × 264 × 57.5 mm Weightapprox. 3.7 kg CoolingNatural convection Noise levels< 25 dB CertificationsEN IEC 61851-1 / IEC 61851-1 / CE-compliant Scope of delivery and equipment1x Deye SUN-EVSE22K01-EU-AC Smart Wallbox with 22 kW1x integrated Type-2 charging cable1x wall bracket including mounting material1x operating and installation instructions
Deye WALLBOX SUN-EVSE11K01-EU-AC 11 kW Smart EV Charger
The Deye SUN-EVSE11K01-EU is a smart 11 kW wallbox for the safe, fast and efficient charging of electric vehicles in both domestic and commercial settings. Thanks to its three-phase connection with a charging power of up to 11 kW, it charges compatible electric and plug-in hybrid vehicles significantly faster than a conventional domestic socket.Thanks to smart control options, integrated communication interfaces and comprehensive safety features, the Deye SUN-EVSE11K01-EU can be flexibly integrated into a modern energy management system. When used in conjunction with compatible Deye inverters, the wallbox can also be used for surplus PV charging, allowing you to use the solar power you generate yourself specifically to charge your vehicle.The key benefits at a glanceHigh charging powerWith a charging power of up to 11 kW via a three-phase connection, the Wallbox charges a compatible electric vehicle much faster than a standard domestic socket.Smart controlCharging processes can be conveniently monitored and controlled via the app. In addition, the wallbox supports authentication via RFID card as well as straightforward plug-and-play operation.Weatherproof and robust designThe housing, with an IP65 protection rating, is protected against dust and water jets. The IK10 impact resistance provides additional protection against mechanical impacts and ensures reliable operation in garages, carports and suitable outdoor areas.Comprehensive safety featuresThe integrated residual current detection for 30 mA AC and 6 mA DC, as well as protection functions against overvoltage, undervoltage, overload, short circuit and overheating, ensure safe charging operation. In accordance with the specified product characteristics, no external Type B residual current circuit breaker is required.Smart charging and solar optimisationThe Deye SUN-EVSE11K01-EU is more than just a standard charging point. It can be used as a smart component of a modern energy system and helps to increase the self-consumption of self-generated solar power. When used in conjunction with compatible Deye inverters, the wallbox supports surplus PV charging. This means the electric vehicle is charged primarily using the solar energy currently available.The wallbox can be integrated into your home network and compatible energy management systems via the built-in Wi-Fi, Bluetooth and RS485 interfaces. Charging times can be scheduled so that the vehicle is charged, for example, when solar power generation is high or during off-peak tariff periods. Control and monitoring are carried out via the Solarman or Deye cloud application.Flexible installation and operationThe wallbox can be mounted directly on a wall or, alternatively, on a suitable freestanding column. The integrated 5-metre Type 2 charging cable allows direct connection to numerous electric and plug-in hybrid vehicles commonly found in Europe. The compact housing and intuitive operation facilitate integration into both domestic and commercial charging environments.Technical Specifications ModelDeye SUN-EVSE11K01-EU Device type11 kW Smart Wallbox Maximum charging power11 kW, three-phase Rated voltage230 / 400 V AC Rated currentmax. 16 A Mains connection3P + N + PE Frequency50 / 60 Hz Charging plugType 2 in accordance with IEC 62196-2 Cable length5 m AuthenticationRFID card, app, plug-and-play CommunicationWi-Fi, Bluetooth, RS485 App controlSolarman / Deye Cloud Residual current detectionIntegrated AC 30 mA and DC 6 mA External RCD, Type BNot required according to the specified configuration Safety featuresOvervoltage, undervoltage, overload, short circuit, overheating and lightning protection Protection classIP65 Impact resistanceIK10 Installation methodWall mounting or free-standing column Dimensions (H × W × D)approx. 325 × 181 × 87 mm Weightapprox. 4 kg Operating temperature-25 °C to +50 °C PV surplus chargingCompatible with Deye inverters Contents of the package1x Deye SUN-EVSE11K01-EU wallbox, 11 kW1x integrated Type 2 charging cable, 5 m long1x wall bracket including fixing materials with screws and wall plugs1x User Manual and Installation Guide
Deye Sun 20K-SG05LP3-EU-SM2 Three-phase hybrid inverter 20KW
The Deye SUN-20K-SG05LP3-EU-SM2 offers a reliable and efficient solution for energy conversion in photovoltaic systems. With its high charging and discharging capacity, as well as support for various battery types, it is ideal for demanding energy projects.Highlights at a glanceHigh performance: 20 kW rated power for high energy requirements Flexible battery options: Compatible with lead-acid and lithium-ion batteries High charging/discharging current: Up to 350A for rapid power transmission Expandable: Up to 10 devices can be connected in parallel Robust design: IP65 protection rating for use in various environments Efficient energy conversion for modern requirementsThe Deye SUN-20K-SG05LP3-EU-SM2 is specifically designed to meet the requirements of modern photovoltaic systems. With its three-phase output and support for 48V low-voltage batteries, it offers an efficient solution for energy conversion and storage.Flexibility and scalabilityThanks to the option of connecting up to 10 units in parallel, the inverter can be flexibly adapted to different system sizes. Support for both lead-acid and lithium-ion batteries allows for customisation to meet specific energy requirements.Reliability and protectionWith an IP65 protection rating, the inverter is protected against dust and water, ensuring reliable operation in a variety of environments. The integrated protection functions ensure safe and stable operation of the system.Who is the Deye SUN-20K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for: Operators of larger solar installations who rely on a flexible and safe storage solution Commercial enterprises wishing to cover energy peaks or operate off-grid Homeowners who want to maximise their self-consumption rate Users with diesel generator backup who are aiming for maximum self-sufficiency FAQs on the Deye Sun three-phase hybrid inverterWhich battery types are supported?The inverter is compatible with lead-acid and lithium-ion batteries within a voltage range of 40 to 60 V.Can I operate several devices in parallel?Yes, up to 10 units can be operated in parallel, making the inverter ideal for larger systems.What is the maximum charging and discharging current?The maximum charging and discharging currents are both 350A, which enables rapid energy transfer.What is the unit’s standby power consumption?The Deye SUN-20K-SG05LP3-EU-SM2 has a power consumption of ≤ 60 W.Will the 20 kW inverter fit an 18 kWp system, or do I need to oversize or undersize it?Yes, the Deye SUN 20K-SG05LP3-EU-SM2 is technically ideal for an 18 kWp system. It does not need to be either oversized or undersized. With a DC/AC ratio of around 0.9, it falls exactly within the ideal range (0.9–1.1 is recommended). This means the system is actually slightly undersized, but this has practically no disadvantages and, at the same time, allows scope for retrofitting additional modules at a later date. Contents: Deye SUN-20K-SG05LP3-EU-SM2 (20 kW LV hybrid inverter) 1 x Deye SUN-20K-SG05LP3-EU-SM2 inverterAn extremely powerful three-phase hybrid inverter with a 20 kW output, an integrated colour LCD touchscreen and support for 48V low-voltage battery systems.1 x wall mount bracketA solid metal mounting rail for securely fixing the unit to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the internet, enabling remote monitoring via the Deye cloud or the Solarman app.3 x current transformers (CT)External fold-out current transformers for measuring energy flows at the property connection, required for net metering and optimising self-consumption.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (positive and negative) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter to the battery management system.1 x fitting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for the correct installation of the wall bracket.1 x User ManualA printed manual containing detailed installation instructions, circuit diagrams and safety instructions.