High voltage
Deye GE-F60 – State-of-the-art energy storage solution for domestic and commercial applications
Deye’s GE-F60 series represents the next generation of intelligent high-voltage energy storage systems. It combines high-performance lithium iron phosphate (LiFePO4) technology with an integrated energy management system, thereby offering a reliable, safe and scalable solution for energy storage, for both domestic and industrial use.Highlights at a glanceCapable of black start & suitable for off-grid use: Automatic restart in the event of a power cut High efficiency and service life: Over 6,000 charge cycles with minimal capacity loss Scalable up to 600 kWh & 500 kW: Flexible expansion to meet growing requirements IP55-certified: Dust- and splash-proof for a wide range of locations Safety & security of the highest standardThe GE-F60 sets new standards in terms of safety:Active gas, smoke and temperature monitoring Aerosol fire-extinguishing system in the module & complete system Redundant power supply for maximum reliability Intelligent cell balancing and automatic fault detection Scalable for any applicationThe basic system comprises 12 modules, each with a capacity of 5.12 kWh, resulting in a total capacity of 61.44 kWh (55.29 kWh usable). Depending on the application, the battery capacity can be expanded to up to 360 kWh. Up to 10 systems can be connected in parallel via the AC side, making them well-suited for large commercial or industrial projects.Who is the Deye GE-F60 suitable for?Private households seeking maximum energy independence SMEs & industrial facilities requiring a stable power supply and peak load management Emergency power systems that must be fail-safe and capable of black start PV projects with high output and storage requirements Off-grid systems, e.g. for remote buildings or isolated gridsFAQs on the Deye GE-F60 energy storage solutionHow much energy is available when the unit is fully loaded?A tower comprising 12 modules delivers 61.44 kWh gross. With a depth of discharge of 90 %, approximately 55.29 kWh of this is usable.What voltages and currents apply?The nominal system voltage is 614 V. The operating range is from 480 to 700 V. The continuous discharge current is specified as 100 A; up to 125 A is possible for short periods.To what extent can the system be scaled?For larger commercial or industrial applications, up to six GE-F60 units can be operated in parallel. This enables total capacities of up to 360 kWh to be achieved.Which inverters is the system compatible with?The GE-F60 is fully pre-configured for hybrid inverters in the SUN-29.9K/30K/35K-SG01HP3-EU-BM3 and SUN-40K/50K-SG01HP3-EU-BM4 series. The appropriate CAN profile (code 00) is already pre-programmed at the factory; manual configuration is not required. It is strongly recommended that you check the compatibility list, as the manufacturer may make changes.What safety features are built in?The safety concept includes gas and smoke detection, active pressure relief, an integrated aerosol extinguishing cartridge and an automatic shut-off within three seconds. These measures specifically address common concerns regarding installation indoors or in the cellar.
Deye GE-F120-2H2 – The future of smart energy management
The GE-F120-2H2 ‘ Deye ’ represents a new generation of high-performance hybrid energy storage systems for residential, commercial and industrial applications. With a rated power of 50 kW and an impressive storage capacity of 120 kWh, this high-voltage system is the ideal solution for complex energy requirements, maximum operational reliability and complete energy independence.Highlights at a glanceGenerous storage capacity: 120 kWh of energy for peak loads and long-term buffering Fast charging/discharging: Optimised for dynamic energy cycles Redundant power supply: Maximum reliability for critical applications Black-start function: Automatic restart possible without a network connection Safe battery technology: Long-lasting & thermally stable LiFePO4 cells Smart storage solution offering maximum flexibilityWith the GE-F120-2H2, Deye combines state-of-the-art technology in a single integrated system: a hybrid inverter, lithium iron phosphate (LFP) batteries and an advanced energy management system (EMS) work seamlessly together. This enables energy flows to be optimised, self-consumption to be maximised and peak loads to be efficiently absorbed, entirely without external support.Redundancy & Black Start: Reliable even in extreme circumstancesThe redundant power supply design guarantees uninterrupted operation even in the event of partial failures. The black-start function allows the system to restart completely without an external power source, making it ideal for off-grid installations or in the event of power cuts in critical infrastructure.LFP technology: Safety & service lifeThe LiFePO4 batteries fitted offer: High thermal stability Long service life & over 6,000 charge cycles Low risk of thermal runaway Sustainability & environmental friendliness Who is the GE-F120-2H2 suitable for?Industrial plants with peak load management PV-powered emergency power supply in commercial buildings Off-grid power supply Critical systems requiring redundancy Large private estates with high energyFAQs on the GE-F120-2H2 Energy Storage System ( Deye )How much energy is actually available?One cabinet provides a gross capacity of 120 kWh, of which around 110 kWh is usable at a 90% depth of discharge – ideal for commercial and industrial businesses with high storage requirements.Is 50 kW sufficient for continuous loads?Yes. The integrated power electronics (PCS) provide 50 kW of continuous power and can supply up to 125 A for 10 seconds, making it sufficiently rated even for peak loads.Can I expand the system later?Up to ten cabinets can be operated in parallel. This enables capacities of up to 1.2 MWh and a total AC output of 500 kW without the need for a system change or additional infrastructure.How hot can the system get?The cell temperature must not exceed 35 °C under full load. The integrated thermal management module automatically monitors and regulates the temperature to prevent a drop in performance or premature ageing.Which inverter is suitable for the system?The integrated 50 kW PCS is pre-configured at the factory for all three-phase Deye hybrid inverters in the SUN-29.9 kW to 50 kW series; plug-and-play operation is possible without additional components. It is strongly recommended that you check the compatibility list, as the manufacturer may make changes.Do I need external NA protection?No, the power conversion stack meets the requirements of VDE-AR-N 4105 and EN 50549-1/-2 and incorporates an integrated anti-islanding protection circuit; additional NA protection is not required.
Deye BOS-A high-voltage storage module LiFePO4 7.68 kWh
The Deye BOS-A is a modular high-voltage energy storage module designed for use in high-performance and scalable storage systems for domestic and commercial applications. Based on superior lithium iron phosphate (LiFePO4) technology, each module offers a capacity of 7.68 kWh. Multiple modules are connected in series to form a high-voltage system that ensures maximum efficiency, safety and flexibility for modern photovoltaic installations.Highlights at a glanceScalable high-voltage system: Several modules (e.g. 7 to 21 units) are combined in series to form a high-performance high-voltage storage tower.Maximum safety with LiFePO4: Cobalt-free lithium iron phosphate technology is regarded as the safest and most durable on the market.Intelligent Battery Management System (BMS): Each module is continuously monitored to ensure safe and optimised operation.High efficiency: High-voltage technology reduces energy losses and increases the overall efficiency of the system.Professional rack mounting: Designed for simple and secure installation in standard industrial racks.Flexible scalability for high energy requirementsThe Deye BOS-A storage system is designed for maximum flexibility and future-proofing. Starting with a system size of, for example, seven modules (approx. 54 kWh), the capacity can be adapted to growing energy requirements by adding further modules. This scalability makes the system the ideal solution for high-demand homes with heat pumps and electric vehicles, as well as for agricultural and commercial businesses seeking to maximise their self-consumption and reduce peak loads.Maximum safety and longevity with LiFePO4The use of lithium iron phosphate cells (LiFePO4) sets the highest safety standard in storage technology. These cells are extremely thermally stable, intrinsically safe and do not require the use of cobalt. They are characterised by an exceptionally high cycle life of over 6,000 charge and discharge cycles, which enables a very long service life of over 15 years and makes the system a sustainable and cost-effective solution.Intelligent control and professional installationAt the heart of the system is the intelligent battery management system (BMS), which is integrated into a central control unit (Cluster Control Box). It reliably protects the storage system against overcharging, deep discharge, overheating and short circuits. It also ensures active cell balancing, which maximises efficiency and service life. The individual modules are designed for quick and safe installation in professional racks (control cabinets), ensuring a neat and standard-compliant installation. FAQs on the Deye BOS-A storage systemWhat is the advantage of a modular storage system?A modular system offers you the flexibility to start with a capacity tailored to your current needs and to expand this later, if required, by adding further modules. You can adapt your storage system to meet increasing energy requirements, for example, those of an electric car.Why is LiFePO4 the safest lithium technology?LiFePO4 cells have a very stable chemical structure. They are not susceptible to thermal runaway, even in the event of mechanical damage or overcharging. This makes them the safest choice for use in residential and commercial buildings.What is the advantage of a high-voltage (HV) storage unit over a low-voltage (LV) one?A high-voltage system operates at a higher voltage and, consequently, with lower currents to transmit the same power. Lower currents result in less heat loss in the cables and the inverter, which increases the overall efficiency of the system (PV installation, storage and inverter).Which inverters is this system compatible with?The Deye BOS-A system is optimally matched to the high-voltage hybrid inverters from Deye (e.g. the 50–100 kW series). Communication between the storage system’s BMS and the inverter ensures perfectly coordinated and efficient operation. Compatibility with inverters from other manufacturers should be checked in advance. It is strongly recommended that you check the compatibility list. Scope of delivery: Deye BOS-A (7.68 kWh HV battery storage module) 1 x Deye BOS-A battery module (7.68 kWh)A high-performance high-voltage LiFePO4 storage module for industrial applications with a capacity of 7.68 kWh, designed for installation in 19-inch rack systems.1 x set of internal DC connection cablesShort, high-current-rated power cables for connecting the module in series with the next module within the battery cabinet.1 x internal communication cable (RJ45)A data cable for integrating the module into the internal BMS communication chain for monitoring cell voltages and temperatures.1 x installation kit (screws and mounting brackets)Special brackets and screws for the secure mechanical fixing of the module in the rack’s profile rails.1 x earthing cable (Grounding Cable)A yellow-green cable for the correct equipotential bonding between the module housing and the cabinet’s central earthing point.1 x User Guide (Manual)A technical supplement containing specifications, installation instructions and information on the correct addressing of the module within the system network.
