Devices
Beltrona E-bike battery
This high-quality Beltrona lithium-ion replacement battery was specially developed for pedelecs with the widely used Bosch Active Line, Performance Line and Performance Line CX drive systems (from model year 2014) with rack mounting. With its enormous capacity of 20 Ah, it gives your e-bike an outstanding, greatly extended range and ensures ultimate, long-lasting riding enjoyment. The battery combines state-of-the-art cell technology with an intelligent battery management system (BMS) and a precisely fitting housing to ensure maximum performance, safety and compatibility.Highlights at a glanceEnormous capacity: With 20 Ah (720 Wh) for extremely long tours and one of the greatest ranges available.Precisely fitting replacement: 100% compatible with the Bosch Active/Performance System (rack version, from 2014) and the original charger.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating and short circuit.Easy handling: The battery can be simply inserted into the rack as with the original and charged on the bike or removed for charging.Maximum range and riding enjoyment for your pedelecGive your e-bike a second life and overcome all previous range limits. This replacement battery is the ideal choice to drastically increase the range of your pedelec or to replace an ageing original battery. The enormous capacity of 20 ampere hours enables you to tackle daily stages and the most demanding routes with many climbs without having to worry about the charging status. Enjoy ultimate freedom on two wheels.Modern cell technology and intelligent managementInside this battery, only high-quality and long-lasting lithium-ion brand cells ensure reliable power output. The integrated battery management system (BMS) is the brain of the battery. It constantly monitors each individual cell, protects against harmful influences and ensures an even charge through active balancing. This maximises not only safety, but also the service life and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis Beltrona battery is designed as a direct replacement for a wide range of e-bikes equipped with the Bosch Active or Performance Line drive and a rack battery. It can be simply replaced with the existing battery and charged with your original Bosch charger. It replaces the original Bosch PowerPacks for the rack (e.g. PowerPack 300, 400, 500). Features ModelBeltrona e-bike rack battery for Bosch Active/Performance ApplicationE-bike drive System compatibilityBosch Active & Performance Line (from 2014) TechnologyLithium-ion (Li-Ion) Rated voltage (V)36.0 Capacity (Ah)20 Energy (Wh)720 Dimensions (L x W x H in mm)approx. 370 x 120 x 85 Weight (kg)approx. 3.7 FAQs about the e-bike replacement batteryCan I continue to use my original Bosch charger?Yes, this replacement battery is fully compatible with the original Bosch charger for the Active/Performance Line system. Please note that the charging time is correspondingly longer due to the very high capacity than with a battery with lower capacity.How far can I get with this 20Ah battery?The range depends on many factors, such as the selected support level, the terrain, the rider's weight and the tyre pressure. However, compared to the original PowerPack 500 (approx. 13.4Ah), you will achieve a significantly higher range with this 20Ah battery of up to 50% more.Is this battery also compatible with the Bosch Classic Line?No, this battery is designed exclusively for the Bosch Active Line, Performance Line and Performance Line CX systems from model year 2014. It is mechanically and electronically not compatible with the older Classic Line (mainly model years up to 2013).What is the best way to store the battery in winter?Store the battery in a cool (10-15 °C), dry place and avoid frost. The ideal charge level for longer storage is about 30% to 60%. It is recommended to check the charge level every 2-3 months and recharge the battery briefly if necessary to avoid deep discharge.
Beltrona E-bike frame battery f
The Beltrona Li-Ion replacement battery for Bosch Active/Performance Line is the ideal solution for e-bike owners who need a reliable and extremely powerful energy source. This high-quality lithium-ion battery was specially developed for Bosch Active and Performance Line (from 2014) and guarantees seamless integration into your pedelec. With its enormous capacity of 20Ah, it offers maximum service life, high energy density and ensures impressive ranges, whether you are commuting in the city or going on longer tours. With this replacement battery, your e-bike is always ready for use and delivers the power you need to enjoy your adventures without interruptions.Highlights at a glanceEnormous capacity: With 20 Ah (720 Wh) for extremely long tours and one of the largest available ranges.Precise replacement: 100% compatible with the Bosch Active/Performance system (frame battery version, from 2014) and the original charger.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating and short circuit.Easy handling: The battery can be simply attached to the frame like the original and charged on the bike or removed for charging.Maximum range and riding pleasure for your pedelecGive your e-bike a second life and overcome all previous range limitations. This replacement battery is the ideal choice to drastically increase the range of your pedelec or to replace an ageing original battery. The enormous capacity of 20 ampere hours allows you to master day stages and the most demanding routes with many gradients without having to worry about the charge level. Enjoy ultimate freedom on two wheels.Modern cell technology and intelligent managementInside this battery, only high-quality and durable lithium-ion branded cells ensure reliable power delivery. The integrated battery management system (BMS) is the brain of the battery. It continuously monitors every single cell, protects against harmful influences and ensures uniform charging through active balancing. This not only maximises safety but also the service life and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis Beltrona battery is designed as a direct replacement for a wide range of e-bikes equipped with the Bosch Active or Performance Line drive and a frame battery. It can be simply exchanged for the existing battery and charged with your original Bosch charger. It replaces the original Bosch PowerPacks for the frame (e.g. PowerPack 300, 400, 500). Features ModelBeltrona e-bike frame battery for Bosch Active/Performance ApplicationE-bike drive System compatibilityBosch Active & Performance Line (from 2014) TechnologyLithium-ion (Li-Ion) Rated voltage (V)36.0 Capacity (Ah)20 Energy (Wh)720 Dimensions (L x W x H in mm)approx. 350 x 90 x 90 Weight (kg)approx. 3.8 FAQs about the e-bike replacement batteryCan I continue to use my original Bosch charger?Yes, this replacement battery is fully compatible with the original Bosch charger for the Active/Performance Line system. Please note that the charging time is correspondingly longer than for a battery with a lower capacity due to the very high capacity.How far can I get with this 20Ah battery?The range depends on many factors, such as the selected support level, the terrain, the rider's weight and the tyre pressure. However, compared to the original PowerPack 500 (approx. 13.4Ah), you will achieve a significantly higher range of up to 50% more with this 20Ah battery.Is this battery also compatible with the Bosch Classic Line?No, this battery is designed exclusively for the Bosch Active Line, Performance Line and Performance Line CX systems from model year 2014. It is mechanically and electronically not compatible with the older Classic Line (mostly model years up to 2013).What is the best way to store the battery during winter?Store the battery in a cool (10-15 °C), dry place and avoid frost. The ideal state of charge for longer storage is around 30% to 60%. It is advisable to check the charge level every 2-3 months and, if necessary, recharge the battery briefly to avoid deep discharge.
Beltrona E-bike frame battery f
This high-quality Beltrona lithium-ion replacement battery was specially developed for pedelecs with the widely used Bosch Active Line, Active Line Plus, Performance Line and Performance Line CX drive systems (from model year 2014) with frame mounting. With its high capacity of 15 Ah (540 Wh), it gives your e-bike a significantly extended range and ensures long-lasting riding enjoyment. The battery combines state-of-the-art cell technology with an intelligent battery management system (BMS) and a customised housing to ensure maximum performance, safety and compatibility.Highlights at a glanceHigh capacity: With 15 Ah (540 Wh) for extended tours and a longer range than the original PowerPack 400.Precisely fitting replacement: 100% compatible with the Bosch Active/Performance system (frame battery version, from 2014) and the original charger.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating and short circuit.Easy handling: The battery can be simply attached to the frame like the original and charged on the bike or removed for charging.More range and riding fun for your pedelecGive your e-bike a second life. This replacement battery is the ideal choice for increasing the range of your pedelec or replacing an ageing original battery. The high capacity of 15 ampere hours allows you to tackle longer trips and more challenging routes with inclines without having to worry about the charge level. Enjoy the freedom of travelling further and longer.Modern cell technology and intelligent managementInside this battery, only high-quality and long-lasting lithium-ion brand cells ensure reliable power output. The integrated battery management system (BMS) is the brain of the battery. It constantly monitors each individual cell, protects against harmful influences and ensures an even charge through active balancing. This not only maximises safety, but also the service life and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis Beltrona battery is designed as a direct replacement for a wide range of e-bikes equipped with the Bosch Active or Performance Line drive and a frame battery. It can be easily replaced with the existing battery and charged with your original Bosch charger. It replaces the original Bosch PowerPacks for the frame (e.g. PowerPack 300, 400, 500). Features ModelBeltrona E-bike frame battery for Bosch Active/Performance ApplicationE-bike drive System compatibilityBosch Active & Performance Line (from 2014) TechnologyLithium-ion (Li-Ion) Rated voltage (V)36.0 Capacity (Ah)15 Energy (Wh)540 Dimensions (L x W x H in mm)approx. 350 x 90 x 90 Weight (kg)approx. 3.1 FAQs about the e-bike replacement batteryCan I continue to use my original Bosch charger?Yes, this replacement battery is fully compatible with the original Bosch charger for the Active/Performance Line system. Please note that the charging time may be slightly longer than for a battery with a lower capacity due to the higher capacity.How far can I get with this 15Ah battery?The range depends on many factors, such as the selected support level, the terrain, the rider's weight and the tyre pressure. Compared to the original PowerPack 400 (approx. 11Ah), however, you will achieve a significantly longer range of approx. 35% more with this 15Ah battery.Is this battery also compatible with the Bosch Classic Line?No, this battery is designed exclusively for the Bosch Active Line, Performance Line and Performance Line CX systems from model year 2014. It is mechanically and electronically not compatible with the older Classic Line (mostly model years up to 2013).What is the best way to store the battery in winter?Store the battery in a cool (10-15 °C), dry place and avoid frost. The ideal charge level for longer storage is around 30% to 60%. We recommend checking the charge level every 2-3 months and recharging the battery briefly if necessary to avoid deep discharge.
E-bike Vision PowerPack Intube battery 36V 14Ah (vertical)
This high-quality E-Bike Vision PowerPack is designed as a precisely fitting replacement or second battery for e-bikes with the Bosch Active Line, Performance Line and Performance Line CX drive system (from model year 2014) and vertical Intube battery (Powertube). With a capacity of 14 Ah (approx. 500 Wh), this battery offers excellent range for extended tours. The battery combines state-of-the-art cell technology with an intelligent battery management system (BMS) and a robust housing to ensure maximum performance, safety, and seamless integration into your bicycle frame.Highlights at a glanceHigh capacity: With 14 Ah (approx. 500 Wh) for long and demanding tours.Precisely fitting replacement: 100% compatible with the Bosch Active/Performance/CX system for vertical Powertube batteries.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating, and short circuit.Splashproof and dustproof: Robust construction for reliable function in all weather conditions.Long-lasting energy, perfectly integratedGive your e-bike new endurance. This Intube battery is the ideal choice to replace an ageing original battery or to acquire a second battery for especially long tours. It integrates seamlessly into the down tube of your e-bike, maintaining the slim and integrated appearance. The high capacity ensures that even on demanding routes or with high support level you will not be left stranded halfway.Modern cell technology and intelligent managementInside this battery, only high-quality and durable lithium-ion branded cells ensure reliable power output. The integrated battery management system (BMS) communicates perfectly with the Bosch drive system and continuously protects the battery. It monitors each individual cell, protects against harmful influences, and through active balancing, ensures uniform charging. This maximises not only safety, but also the lifetime and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis E-Bike Vision PowerPack is designed as a direct replacement for vertically installed Bosch Powertube batteries (e.g. Powertube 400, 500). It can simply be exchanged for the existing battery and charged with your original Bosch charger. Features ModelE-Bike Vision PowerPack Intube (Vertical) ApplicationE-Bike drive (In-Tube mounting) System compatibilityBosch Active & Performance Line TechnologyLithium-Ion (Li-Ion) Rated voltage (V)36.0 Capacity (Ah)14 Energy (Wh)504 Dimensions (L x W x H in mm)approx. 355 x 85 x 65 Weight (kg)approx. 3.0 FAQs about the E-Bike replacement batteryHow do I know whether I need the vertical or horizontal version?This depends on the design of your bicycle frame. With the vertical version, the battery is inserted into the down tube from above or below. With the horizontal version, it is removed or inserted from the side of the down tube. Please compare the installation direction with your current battery.Can I continue to use my original Bosch charger?Yes, this replacement battery is fully compatible with the original Bosch charger (2A, 4A or 6A) for the Active/Performance Line system. You can continue to use your existing charging station without any problem.Is this battery also compatible with the Bosch Classic Line?No, this battery is designed exclusively for the Bosch Active Line, Performance Line and Performance Line CX systems from model year 2014 with Intube battery. It is not compatible with the older Classic Line.What is the best way to store the battery in winter?Store the battery in a cool place (10-15 °C), dry, and avoid frost. The ideal state of charge for longer storage is about 30% to 60%. It is recommended to check the charge level every 2-3 months and if necessary briefly recharge the battery to avoid deep discharge.
E-Bike Vision Powerpack Intube - 14 Ah - horizontal battery
This high-quality E-Bike Vision PowerPack is designed as a custom-fit replacement or second battery for e-bikes with the Bosch Active Line, Performance Line and Performance Line CX drive system (from model year 2014) and horizontal intube battery (Powertube). With a capacity of 14 Ah (approx. 500 Wh), this battery offers an excellent range for extended tours. The battery combines state-of-the-art cell technology with an intelligent battery management system (BMS) and a robust housing to ensure maximum performance, safety, and seamless integration into your bike frame.Highlights at a glanceHigh capacity: With 14 Ah (approx. 500 Wh) for long and demanding tours.Precisely fitting replacement: 100% compatible with the Bosch Active/Performance/CX system for horizontal Powertube batteries.Modern Li-Ion technology: High energy density, no memory effect and low self-discharge.Integrated BMS: Comprehensive protection electronics against overcharging, deep discharge, overheating and short circuit.Splashproof and dustproof: Robust construction for reliable function in any weather.Long-lasting energy, perfectly integratedGive your e-bike new stamina. This intube battery is the ideal choice if you need to replace an ageing original battery or want a second battery for particularly long tours. It fits seamlessly into the down tube of your e-bike, preserving its slim and integrated appearance. The high capacity ensures you won't be stranded halfway even on demanding routes or at a high support level.Modern cell technology and intelligent managementInside this battery, exclusively high-quality and durable lithium-ion branded cells ensure reliable power output. The integrated battery management system (BMS) communicates perfectly with the Bosch drive system and constantly protects the battery. It monitors each individual cell, protects against harmful influences and ensures uniform charging by means of active balancing. This not only maximises safety but also the service life and efficiency of the entire battery pack.Comprehensive compatibility and easy replacementThis E-Bike Vision PowerPack is designed as a direct replacement for horizontally installed Bosch Powertube batteries (e.g. Powertube 400, 500). It can be easily swapped for the existing battery and charged with your original Bosch charger. Features ModelE-Bike Vision Powerpack Intube (Horizontal) ApplicationE-Bike drive (In-Tube mounting) System compatibilityBosch Active & Performance Line TechnologyLithium-ion (Li-Ion) Rated voltage (V)36.0 Capacity (Ah)14 Energy (Wh)504 Dimensions (L x W x H in mm)approx. 355 x 65 x 85 Weight (kg)approx. 3.0 FAQs about the e-bike replacement batteryHow do I know if I need the horizontal or vertical version?This depends on the construction of your bike frame. With the horizontal version, the battery is removed or inserted from the side of the down tube. With the vertical version, it is inserted into the down tube from above or below. Please compare the removal direction with your current battery.Can I continue to use my original Bosch charger?Yes, this replacement battery is fully compatible with the original Bosch charger (2A, 4A or 6A) for the Active/Performance Line system. You can simply continue to use your existing charging station.Is this battery also compatible with the Bosch Classic Line?No, this battery is designed exclusively for the Bosch Active Line, Performance Line and Performance Line CX systems from model year 2014 with intube battery. It is not compatible with the older Classic Line.What is the best way to store the battery in winter?Store the battery in a cool (10-15 °C), dry place and avoid frost. The ideal charge level for longer storage is about 30% to 60%. It is recommended to check the charge level every 2-3 months and, if necessary, briefly recharge the battery to avoid deep discharge.
VISION RBC48 replacement battery for APC Smart UPS
The VISION RBC48 is a high-quality replacement battery kit, designed as a direct and reliable replacement for the original APC RBC48 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this kit ensures fail-safe power supply for your safety-critical applications.Highlights at a glance100% Compatible: Developed as a precisely fitting replacement for APC RBC48, it ensures easy and quick installation.High reliability: Uses high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any battery maintenance superfluous.Long-lasting: Designed for a long service life in standby operation, to protect your systems for years.Easy replacement: The kit is supplied as a complete set of two batteries so you can perform the replacement quickly and easily yourself.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC48 kit is designed to meet the demanding requirements of various APC Smart UPS systems. The installed batteries are high-current capable and can immediately provide the required power in the event of a power failure to safely shut down or continue operating your connected servers, computers and other critical devices. The stable and reliable performance protects your valuable hardware from damage caused by fluctuations and failures.Robust technology for demanding environmentsThe batteries used in the RBC48 kit are based on the proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely bound in a glass fibre mat. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and operational readiness. The robust ABS plastic housing of the batteries offers excellent protection against mechanical influences.Features ModelVISION RBC48 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 12V AGM batteries Rated voltage (V)12 (per battery) / 24 (system) Capacity (Ah)7 (typical value, per battery) Charging voltage (trickle charge)27.0V - 27.6V (system) Charging voltage (cyclic operation)28.8V - 30.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 4.2 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC DLA1500I, SMT1500I, SUA1500I FAQs about the VISION RBC48 replacement batteryWhich UPS models is this kit suitable for?The VISION RBC48 kit is designed as a replacement for the original APC RBC48 battery unit and is compatible, among others, with the following APC Smart UPS models: DLA1500I, SMT1500I, SMT1500IC and SUA1500I. Please check the exact designation of your UPS system before purchasing.Is replacing the battery complicated?No, replacing the battery is generally very easy and can be carried out without technical expertise. Most APC UPS systems have an easily accessible battery compartment. You only need to disconnect and remove the old battery unit and connect and insert the new VISION RBC48 kit. Please ensure the correct wiring of the two batteries.Do I have to adjust anything on the UPS after replacement?After installing the new battery, the UPS should be switched on and a self-test function performed. It is recommended to note the replacement date of the battery via the software (PowerChute) or the display. A runtime calibration may be useful to ensure accurate remaining runtime indication.Is it safe to use a replacement battery from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC48 kit uses exclusively quality-tested batteries that are designed for use in UPS systems and ensure maximum safety.What is the service life of the VISION RBC48 replacement battery?The service life of the installed batteries in typical standby operation in a UPS system at 20 °C is up to 5 years. The actual service life may be affected by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old battery pack?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old battery pack free of charge and in an environmentally friendly way at municipal collection points, recycling centres or at any retailer who sells starter batteries.
VISION RBC17 Replacement Battery f
The VISION RBC17 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC17 battery unit. Consisting of a high-performance, valve-regulated VRLA battery, this kit offers a cost-effective and safe solution to restore the full performance of your APC Back UPS system. Equipped with maintenance-free AGM technology, this kit ensures fail-safe power supply for your connected devices.Highlights at a glance100% Compatible: Developed as an exact replacement for APC RBC17, ensures easy and quick installation.High reliability: Uses a high-quality AGM battery optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any maintenance of the battery unnecessary.Durable: Designed for a long service life in standby operation, to protect your systems for years.Easy replacement: The kit comes ready to install so that you can make the replacement quickly and easily yourself.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC17 kit is designed to meet the demanding requirements of various APC Back UPS systems. The battery used is high-current capable and can immediately deliver the power required in the event of a power failure to safely shut down or continue operating your connected computers, networks and other critical devices. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe battery used in the RBC17 kit is based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a glass fibre mat. This makes the battery absolutely leak-proof and allows operation in any position. The low self-discharge rate ensures long shelf life and readiness for use. The robust ABS plastic housing of the battery offers excellent protection from mechanical impacts.Features ModelVISION RBC17 replacement battery Battery typeVRLA AGM (UPS replacement battery) Contents1 x 12V AGM battery Nominal voltage (V)12 Capacity (Ah)7 - 9 (depending on model) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 2.6 ConnectionSuitable for APC UPS models Compatibility (selection)APC BE600M1, BE750G, BN700MC, BN900M FAQs about the VISION RBC17 replacement batteryWhich UPS models is this kit suitable for?The VISION RBC17 kit is designed as a replacement for the original APC RBC17 battery unit and is compatible with, among others, the following APC Back UPS models: BE600M1, BE650G1, BE700, BE750G, BN600, BN650M1, BN700MC and BN900M. Please check the exact designation of your UPS system before purchasing.Is replacing the battery complicated?No, replacement is generally very simple and can be carried out without technical expertise. Most APC Back UPS systems have an easily accessible battery compartment. You simply need to disconnect and remove the old battery, and connect and insert the new VISION RBC17 battery.Do I have to make any settings on the UPS after replacement?After inserting the new battery, you should switch the UPS on and run a self-test function if your model offers this. It is also recommended to fully charge the battery in the UPS for at least 8 hours before first use. Special calibration is not necessary for these models.Is it safe to use a replacement battery from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC17 kit uses only quality-tested batteries designed for use in UPS systems and guarantees maximum safety.What is the service life of the VISION RBC17 replacement battery?The service life of the installed battery is up to 5 years in typical standby operation in a UPS system at 20°C. The actual service life may be affected by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old battery?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old battery free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or any dealer who sells starter batteries.
VISION RBC4 Replacement Battery f
The VISION RBC4 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC4 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution for restoring the full performance of your APC Back UPS Pro or Smart UPS system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your safety-critical applications.Highlights at a glance100% Compatible: Developed as a custom-fit replacement for APC RBC4, ensures quick and easy installation.High reliability: Uses high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates the need for battery maintenance.Long-lasting: Designed for a long service life in standby mode to protect your systems for years.Simple replacement: The kit is supplied as a complete set of two batteries so that you can quickly and easily replace them yourself.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC4 kit is designed to fulfil the demanding requirements of various APC UPS systems. The built-in batteries are high-current capable and can immediately provide the power required to safely shut down or continue operating your connected servers, computers and other critical devices in the event of a power failure. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe batteries used in the RBC4 kit are based on the proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely bound in a glass fibre fleece. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and operational readiness. The robust ABS plastic housing of the batteries offers excellent protection against mechanical impact.Features ModelVISION RBC4 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 12V AGM batteries Rated voltage (V)12 (per battery and system) Capacity (Ah)12 (per battery) / 24 (system) Charging voltage (float charge)13.5V - 13.8V (system) Charging voltage (cycle operation)14.4V - 15.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 7.2 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC BP650S, BK650MC, SUVS650 FAQs about the VISION RBC4 replacement batteryFor which UPS models is this kit suitable?The VISION RBC4 kit is designed as a replacement for the original APC RBC4 battery unit and is compatible with the following APC models, among others: BP650S, BP650SC, BK650MC and SUVS650. Please check the exact designation of your UPS system before purchasing.Is replacing the battery complicated?No, the replacement is usually very simple and can be carried out without technical expertise. Most APC UPS systems have an easily accessible battery compartment. All you have to do is disconnect and remove the old battery unit and connect and insert the new VISION RBC4 kit. Ensure that the two batteries are wired correctly.Do I have to adjust anything on the UPS after replacing the battery?After inserting the new battery, you should switch on the UPS and perform a self-test function if your model offers this. It is also recommended that you fully charge the battery in the UPS before using it for the first time. A special calibration is usually not necessary for these models.Is it safe to use a replacement battery from a third-party manufacturer?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC4 kit uses only quality-tested batteries that are designed for use in UPS systems and guarantee maximum safety.What is the service life of the VISION RBC4 replacement battery?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20 °C. The actual service life can be influenced by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old battery pack?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old battery pack free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or at any dealer who sells starter batteries.
VISION RBC11 replacement battery for APC Smart UPS
The VISION RBC11 is a high-quality replacement battery kit, designed as a direct and reliable replacement for the original APC RBC11 battery unit. Consisting of four high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and secure solution to restore the full performance capability of your APC Smart UPS or Back UPS Pro unit. Equipped with maintenance-free AGM technology, this kit ensures fail-safe power supply for your safety-critical applications.Highlights at a glance100% Compatible: Developed as a precisely fitting replacement for APC RBC11, ensures an easy and rapid installation.High reliability: Uses high-quality AGM batteries, which are optimised for demanding UPS operation with high discharge currents.Maintenance-free: The leak-proof AGM technology makes all battery maintenance unnecessary.Long-lasting: Designed for extended service life in standby mode to protect your systems for years.Easy replacement: The kit is delivered as a complete set of four batteries so that you can carry out the replacement quickly and easily yourself.Economic solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC11 kit is designed to meet the demanding requirements of APC Smart UPS and Back UPS Pro units. The installed batteries are high-current capable and can immediately supply the required power in the event of a power failure, allowing you to safely shut down or continue to operate your connected servers, networks and other critical equipment. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC11 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), where the electrolyte is securely bound in a glass fibre mat. This makes the batteries absolutely leak-proof and allows operation in any position. The low self-discharge ensures long shelf life and readiness for use. The robust ABS plastic case of the batteries provides excellent protection against mechanical impact.Features ModelVISION RBC11 Replacement Battery Battery typeVRLA AGM (UPS Replacement Battery Kit) Contents4 x 12V AGM Batteries Nominal Voltage (V)12 (per battery) Capacity (Ah)17 (Typical value, per battery) Charging Voltage (Float Charge)13.5V - 13.8V Charging Voltage (Cyclic Use)14.4V - 15.0V Operating Temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage Temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 24.0 (total weight) ConnectionSuitable for APC UPS models Compatibility (excerpt)APC SU1000, SU1500, SU700XL FAQs about the VISION RBC11 Replacement BatteryFor which UPS models is this kit suitable?The VISION RBC11 kit is designed as a replacement for the original APC RBC11 battery unit and is compatible, among others, with the following APC models: SU1000, SU1000NET, SU1000RM, SU1000RMINET, SU1500, SU1500RM, SU700XL, SU700XLNET, BP1000. Please check the exact designation of your UPS unit before purchase.Is replacing the battery complicated?No, replacement is generally very straightforward and can be carried out without technical expertise. Most APC UPS units have a readily accessible battery compartment. You just need to disconnect and remove the old battery unit, and install and connect the new VISION RBC11 kit. Please ensure correct cabling of the four batteries.Do I need to adjust the UPS after replacement?After replacement, it is recommended to perform a runtime calibration using the APC PowerChute software or the UPS display. This ensures that the UPS correctly recognises the new battery capacity and shows the remaining runtime accurately. Please fully charge the batteries before calibration.Is it safe to use a replacement battery from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC11 kit uses only quality-tested batteries that are designed for use in UPS units and ensure maximum safety.What is the service life of the VISION RBC11 Replacement Battery?The service life of the installed batteries in typical standby operation in a UPS unit at 20 °C is up to 5 years. The actual lifespan may be affected by factors such as ambient temperature and the frequency of power failures.What should I consider when disposing of the old battery set?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old battery set free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or at any dealer who sells starter batteries.
VISION RBC2 Replacement Battery f
The VISION RBC2 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC2 battery unit. Consisting of a high-performance, valve-regulated VRLA battery, this kit offers a cost-effective and safe solution for restoring the full performance of your APC Back UPS system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your connected devices.Highlights at a glance100% Compatible: Developed as a custom-fit replacement for APC RBC2, ensures quick and easy installation.High Reliability: Uses a high-quality AGM battery that is optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates the need for battery maintenance.Long-lasting: Designed for a long service life in standby mode to protect your systems for years.Simple Replacement: The kit is supplied ready for installation so that you can carry out the replacement yourself quickly and easily.Economical Solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC2 kit is designed to fulfil the demanding requirements of various APC Back UPS systems. The built-in battery is capable of delivering high current and can immediately provide the required power in the event of a power failure to either safely shut down or continue running your connected computers, networks, and other critical devices. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe battery used in the RBC2 kit is based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a glass fibre mat. This makes the battery completely leak-proof and allows operation in any position. The low self-discharge ensures a long shelf life and readiness for use. The robust ABS plastic battery housing offers excellent protection against mechanical influences.Features ModelVISION RBC2 replacement battery Battery typeVRLA AGM (UPS replacement battery) Contents1 x 12V AGM battery Rated voltage (V)12 Capacity (Ah)7 - 9 (depending on model) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 2.6 ConnectionSuitable for APC UPS models Compatibility (extract)APC BE550G, BK350, BK500, BP280 FAQs about the VISION RBC2 replacement batteryFor which UPS models is this kit suitable?The VISION RBC2 kit is designed to replace the original APC RBC2 battery unit and is compatible with a wide range of APC Back UPS models, including BE550G, BK350, BK500, BK650EI, BP280BPNP and many others. Please check the exact designation of your UPS system before purchase.Is replacing the battery complicated?No, replacement is usually very simple and can be done without technical expertise. Most APC Back UPS systems have an easily accessible battery compartment. You only need to disconnect the old battery, remove it, and connect and install the new VISION RBC2 battery.Do I need to set anything on the UPS after the replacement?After inserting the new battery, you should turn on the UPS and run a self-test function if your model provides it. It is also advisable to fully charge the battery in the UPS for at least 8 hours before first use. No special calibration is necessary for these models.Is it safe to use a third-party replacement battery?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC2 kit uses only quality-tested batteries designed for use in UPS systems and ensures the highest level of safety.What is the service life of the VISION RBC2 replacement battery?The service life of the installed battery is up to 5 years in typical standby operation in a UPS system at 20°C. Actual service life may be affected by factors such as ambient temperature and the frequency of power outages.What should I bear in mind when disposing of the old battery?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old battery free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or at any dealer selling starter batteries.
VISION RBC7 Replacement Battery f
The VISION RBC7 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC7 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution for restoring the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your mission-critical applications.Highlights at a glance100% compatible: Developed as a custom-fit replacement for APC RBC7, ensures quick and easy installation.High reliability: Uses high-quality AGM batteries that are optimised for demanding UPS operation with high discharge currents.Maintenance-free: The leak-proof AGM technology eliminates the need for battery maintenance.Long-lasting: Designed for a long service life in standby mode to protect your systems for years.Simple replacement: The kit is supplied as a complete set of two batteries so that you can quickly and easily replace them yourself.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC7 kit is designed to meet the demanding requirements of APC Smart UPS systems in the 1500VA class. The built-in batteries are high-current capable and can immediately provide the power required to safely shut down or continue operating your connected servers, network storage and other critical devices in the event of a power failure. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe batteries used in the RBC7 kit are based on the proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely bound in a glass fibre fleece. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and operational readiness. The robust ABS plastic housing of the batteries offers excellent protection against mechanical impact.Features ModelVISION RBC7 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 12V AGM batteries Rated voltage (V)12 (per battery) / 24 (system) Capacity (Ah)17 (Typical value, per battery) Charging voltage (trickle charge)27.0V - 27.6V (system) Charging voltage (cycle operation)28.8V - 30.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 11.0 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC SU1500I, SUA1500I, SMT1500I FAQs about the VISION RBC7 replacement batteryFor which UPS models is this kit suitable?The VISION RBC7 kit is designed as a replacement for the original APC RBC7 battery unit and is compatible with the following APC Smart UPS models, among others: SU1500I, SUA1500I and SMT1500I. Please check the exact designation of your UPS system before purchasing.Is it complicated to replace the battery?No, the replacement is usually very simple and can be carried out during operation (hot swap) without technical expertise. The APC UPS systems have an easily accessible battery compartment. All you have to do is disconnect and remove the old battery unit and connect and insert the new VISION RBC7 kit. Ensure that the two batteries are wired correctly.Do I have to adjust anything on the UPS after replacing the battery?After inserting the new battery, you should switch on the UPS and perform a self-test function. It is recommended to note the replacement date of the battery via the software (PowerChute) or the display. A runtime calibration may be useful to ensure the exact remaining runtime display.Is it safe to use a replacement battery from a third-party manufacturer?Yes, absolutely. Vision is a renowned manufacturer of high-quality AGM batteries that often meet or exceed the specifications of the original batteries. Our RBC7 kit uses only quality-tested batteries that are designed for use in UPS systems and guarantee maximum safety.What is the service life of the VISION RBC7 replacement battery?The service life of the installed batteries is up to 5 years in typical standby operation in a UPS system at 20 °C. The actual service life can be influenced by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old battery pack?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old battery pack free of charge and in an environmentally friendly manner at municipal collection points, recycling centres or at any retailer that sells starter batteries.
VISION RBC6 Replacement Battery f
The VISION RBC6 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC6 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this kit ensures fail-safe power supply for your safety-critical applications.Highlights at a glance100% compatible: Developed as a custom-fit replacement for APC RBC6, ensures quick and easy installation.High reliability: Uses high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates any need for battery maintenance.Long-lasting: Designed for long service life in standby operation, to protect your systems for years.Simple replacement: The kit is supplied as a complete set of two batteries, so you can carry out the replacement quickly and easily yourself.Economical solution: Offers the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC6 kit is designed to fulfil the demanding requirements of various APC Smart UPS systems. The built-in batteries are high-current capable and, in the event of a power failure, can immediately provide the required output to safely shut down or keep your connected servers, computers and other critical devices running. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and failures.Robust technology for demanding environmentsThe batteries used in the RBC6 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a fibreglass mat. This makes the batteries absolutely leak-proof and allows operation in any position. The low self-discharge ensures a long shelf life and operational readiness. The robust ABS plastic housing of the batteries provides excellent protection against mechanical effects.Features ModelVISION RBC6 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 12V AGM batteries Rated voltage (V)12 (per battery) / 24 (system) Capacity (Ah)12 (typical value, per battery) Charging voltage (float charge)27.0V - 27.6V (system) Charging voltage (cyclic operation)28.8V - 30.0V (system) Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 7.2 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC SU1000I, SU1000INET FAQs about the VISION RBC6 replacement batteryFor which UPS models is this kit suitable?The VISION RBC6 kit is designed as a replacement for the original APC RBC6 battery unit and is, among others, compatible with the following APC Smart UPS models: SU1000I and SU1000INET. Please check the exact designation of your UPS system before purchase.Is it complicated to replace the battery?No, replacement is generally very simple and can be performed without technical expertise. Most APC UPS systems have an easily accessible battery compartment. All you need to do is disconnect and remove the old battery unit and connect and insert the new VISION RBC6 kit. Make sure to wire the two batteries correctly.Do I need to set anything on the UPS after replacement?After inserting the new battery, you should switch on the UPS and run a self-test function. It's recommended to note the replacement date of the battery via the software (PowerChute) or on the display. A runtime calibration can be helpful to ensure the exact remaining runtime display.Is it safe to use a replacement battery from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or even exceed the specifications of the original batteries. Our RBC6 kit uses only quality-tested batteries designed for use in UPS systems and guarantee the highest safety.What is the service life of the VISION RBC6 replacement battery?The service life of the built-in batteries in typical standby operation in a UPS system at 20°C is up to 5 years. The actual service life may be affected by factors such as ambient temperature and frequency of power failures.What do I need to consider when disposing of the old battery pack?Lead-acid batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old battery pack free of charge and in an environmentally responsible manner at municipal collection points, recycling centres, or at any retailer selling starter batteries.
VISION RBC18 Replacement Battery f
The VISION RBC18 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC18 battery unit. Consisting of four high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this kit ensures fail-safe power supply for your safety-critical applications.Highlights at a glance100% compatible: Developed as a precisely fitting replacement for APC RBC18, ensures simple and quick installation.High reliability: Uses high-quality AGM batteries optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology makes any battery maintenance unnecessary.Durable: Designed for a long service life in standby operation, to protect your systems for years.Simple replacement: The kit is delivered as a complete set of four batteries, so you can carry out the replacement quickly and easily yourself.Economic solution: Offers the same performance and safety as the original at an attractive price.Strong performance for safety-critical applicationsThe VISION RBC18 kit is designed to meet the demanding requirements of various APC Smart UPS systems. The installed batteries are high-current capable and can immediately provide the required power in the event of a power outage, to safely shut down or continue operating your connected servers, computers and other critical devices. The stable and reliable performance protects your valuable hardware from damage due to power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC18 kit are based on the proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely contained in a fibreglass mat. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and readiness for use. The robust ABS plastic case of the batteries provides excellent protection against mechanical impacts.Features ModelVISION RBC18 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents4 x 6V AGM batteries Nominal voltage (V)6 (per battery) / 24 (system) Capacity (Ah)7 (typical value, per battery) Charging voltage (float charge)27.0V - 27.6V (system) Charging voltage (cycle use)28.8V - 30.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 4.8 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC SU700RM2U, SU700RMNET FAQs about the VISION RBC18 replacement batteryWhich UPS models is this kit suitable for?The VISION RBC18 kit is designed as a replacement for the original APC RBC18 battery unit and is compatible, among others, with the following APC Smart UPS models: SU700RM2U and SU700RMNET. Please check the precise designation of your UPS system before purchase.Is battery replacement complicated?No, replacement is usually very easy and can be done without technical expertise. Most APC UPS systems have an easily accessible battery compartment. You just need to disconnect the old battery unit, remove it and connect and install the new VISION RBC18 kit. Make sure to wire the four batteries correctly.Do I need to adjust anything on the UPS after replacement?After inserting the new battery, you should switch on the UPS and carry out a self-test function if your model offers this. It is also recommended to fully charge the battery in the UPS before using it for the first time. Special calibration is usually not required for these models.Is it safe to use a replacement battery from third-party manufacturers?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries, which often meet or exceed the specifications of original batteries. Our RBC18 kit only uses quality-tested batteries designed for UPS operation and provides the highest safety.What is the service life of the VISION RBC18 replacement battery?The service life of the installed batteries in typical standby operation in a UPS system at 20 °C is up to 5 years. The actual service life can be influenced by factors such as ambient temperature and the frequency of power outages.What do I need to consider when disposing of the old battery set?Lead-acid batteries are hazardous waste and may not be disposed of in household waste. You can dispose of your old battery set free of charge and in an environmentally friendly way at municipal collection points, recycling centres or any retailer selling starter batteries.
Spare battery for
This powerful NiMH battery is the suitable replacement for the "long" version of the Hetronic batteries, which are often used in the larger vendor's tray transmitters (Nova-L, Nova-XL). In your enquiry you mentioned "HTC" - this is certainly the manufacturer Hetronic meant.This battery replaces the original number 68303000 (as well as the older 68301000). In contrast to the "short" version (Mini), this battery utilises the full space in the battery compartment and offers with 2,000 mAh (2.0 Ah) enormous capacity for long work shifts in crane, concrete pump or forestry operations.Highlights at a glanceLong design (Nova L): This is the elongated bar (approx. 15 cm long). It is specially designed for transmitters that have the deep battery compartment. It provides more than twice as much energy as the small "Mini" battery.Replaces Hetronic 68303000: Fully compatible with the original numbers 68303000 (NiMH standard), 68301000 (NiCd old) and 68301020.High capacity (2.0 Ah): With 2,000 mAh, this is the high-performance version. This allows you to easily operate demanding radio systems with many functions over long periods without having to recharge.Modern NiMH technology: Easily replaces old NiCd batteries. The advantage: No memory effect, higher energy density, and more environmentally friendly.Robust design: The black plastic housing is shock-resistant and designed for tough construction site use. The contacts on the front ensure a secure connection in the transmitter.Compatible transmitter seriesThis battery fits into the large Hetronic systems:Nova-L: The standard "long" Nova.Nova-XL: The extra large version.GL / GR: Older large transmitter series.Not suitable for: Nova-S, Nova-M or Hetronic Mini (these require the short 750 mAh battery!). Features ModelReplacement battery for Hetronic Nova "Long" / Maxi Replaces original no.**68303000** (NiMH), **68301000** (NiCd), 68301010, KH68300990, Maxi Chemical**NiMH** (nickel-metal hydride) Voltage9.6 V Capacity**2000 mAh (2.0 Ah)** - High capacity version for long shifts Compatible transmitters (extract)Hetronic **Nova-L**, **Nova-XL**, GL, GR, Euro series (large compartments) DesignElongated block (black or yellow), end cap with contacts Dimensions (L x W x H in mm)**Approx. 152 x 49 x 14** (Attention: Much longer than the "Mini" version!) Contacts4 contacts on the front (end cap) Weight (g)approx. 220 - 250 (more cells = more weight) FAQs about the Hetronic Nova Long (68303000)What is the difference between "Short" and "Long"?This is the most important difference with Hetronic batteries:Short (Mini): Approx. 6 cm long, 750 mAh (for Mini/Nova-S).Long (this battery): Approx. 15 cm long, 2000 mAh (for Nova-L/XL). Please check your old battery. This item here is the long bar.Can I use this battery instead of the old NiCd battery (68301000)?Yes. Hetronic and third-party manufacturers have almost completely switched to NiMH. The voltage (9.6V) is identical. Your transmitter benefits from almost double the runtime (2.0 Ah vs. previously often 1.2 Ah).Does it fit in the yellow Hetronic charger?Yes. The standard chargers from Hetronic (UCH series) are designed so that the battery either fits in completely or (depending on the charging tray) protrudes at the top, but makes secure contact. Since it is NiMH, the battery is charged correctly.
Duracell Camcorder replacement battery DR9967 f
The Duracell DR9967 is a high-quality lithium-ion replacement battery specifically developed as a replacement for the widely used Sony NP-FW50 battery. As a quality product from the globally renowned brand Duracell, this battery offers reliable, long-lasting power supply and maximum safety for your camera equipment. It delivers a rated voltage of 7.4 V and a capacity of 1020 mAh, making it the ideal choice to extend the life of your trusted Sony Alpha or NEX cameras.Highlights at a GlanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Sony NP-FW50 battery.Modern Li-Ion technology: High capacity of 1020 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge, and short circuit.Reliable performance: 7.4 V voltage for constant and powerful output.Long-lasting Power for Your Sony CameraThe Duracell DR9967 is the perfect power solution for a wide range of popular Sony Alpha system cameras (e.g. Alpha 6000, 6300, 6400, Alpha 7 series) as well as for many NEX and Cybershot models. It ensures that you have the necessary stamina during longer photo shoots or video recordings. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance right up to the last picture.Reliable Lithium-Ion TechnologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older battery types. It does not suffer from the memory effect, which means you can recharge the battery at any time without having to worry about a loss of capacity. The high energy density enables high capacity in a compact and light design that corresponds exactly to the dimensions of the original.Tested Quality and SafetyDuracell batteries are subject to strict quality controls to guarantee consistently high performance and maximum safety. Integrated protection electronics monitor the charging and discharging processes and reliably protect the battery and your valuable camera equipment from overheating, overvoltage, and short circuits. Trust in the tested safety of a global premium brand. Features ModelDuracell Camcorder Replacement Battery DR9967 ApplicationCamera battery CompatibilityReplacement for Sony NP-FW50 TechnologyLithium-ion (Li-Ion) Rated voltage (V)7.4 Capacity (mAh)1020 Energy (Wh)7.5 Dimensions (L x W x H in mm)approx. 45 x 32 x 19 Weight (g)approx. 45 FAQs about the Duracell DR9967 Replacement BatteryIs this battery compatible with my original Sony charger?Yes, this replacement battery is designed to work seamlessly with original Sony chargers (e.g. the BC-TRW) for the NP-FW50 battery. You can continue to use your existing charger without any issues.What does "no memory effect" mean?The memory effect occurred in older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries such as this do not have this issue. You can recharge the battery at any charge level without affecting its service life.Which camera models is this battery suitable for?This battery is compatible with a wide range of Sony cameras that use the NP-FW50. These include many models from the Alpha series (e.g., A6000, A6100, A6300, A6400, A6500, A7, A7 II, A7R, A7R II, A7S, A7S II), the NEX series, and the Cybershot DSC-RX10 series. Please consult your camera's manual to confirm compatibility.How should this battery be disposed of?Batteries must not be disposed of with household waste. As used device batteries, you can return them free of charge to collection points in stores or at municipal recycling centres (e.g., via GRS collection boxes) to ensure proper and environmentally friendly recycling.
Duracell Camcorder replacement battery DRC2L f
The Duracell DRC2L is a high-quality lithium-ion replacement battery that has been specifically developed as a replacement for Canon battery models NB-2L, NB-2LH, and BP-2L5. As a quality product from the world-renowned brand Duracell, this battery offers reliable, long-lasting power and maximum safety for your camera equipment. It provides a nominal voltage of 3.7 V and a capacity of 700 mAh and is the ideal choice for extending the lifespan of your trusted Canon cameras and camcorders.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Canon NB-2L or NB-2LH battery.Modern Li-Ion technology: High capacity of 700 mAh without memory effect.High safety: Integrated protective electronics against overcharging, deep discharge, and short circuit.Reliable performance: 3.7 V voltage for constant and powerful output.Long-lasting energy for your Canon cameraThe Duracell DRC2L is the perfect energy solution for a variety of popular Canon camcorders (e.g. MV series, HV series) and EOS SLR cameras (e.g. EOS 350D, 400D). It ensures that you have the necessary stamina even during extended photo shoots or video recordings. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance right up to the last shot.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older types of batteries. It does not suffer from the memory effect, which means you can recharge the battery at any time without having to worry about a loss of capacity. The high energy density enables a high capacity in a compact and lightweight design that matches the original dimensions exactly.Tested quality and safetyDuracell batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. An integrated protective circuit monitors the charging and discharging process and reliably protects the battery and your valuable camera equipment from overheating, overvoltage, and short circuits. Trust in the tested safety of a global premium brand. Specifications ModelDuracell Camcorder replacement battery DRC2L ApplicationCamcorder / camera battery CompatibilityReplacement for Canon NB-2L TechnologyLithium-ion (Li-Ion) Nominal voltage (V)3.7 Capacity (mAh)700 Energy (Wh)2.6 Dimensions (L x W x H in mm)approx. 45 x 33 x 16 Weight (g)approx. 40 FAQs about the Duracell DRC2L replacement batteryIs this battery compatible with my original Canon charger?Yes, this replacement battery is designed so that it can easily be charged with the original Canon chargers (e.g. the CB-2LWE) for the NB-2L battery. You can simply continue to use your existing charging station.What does "no memory effect" mean?The memory effect occurred with older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries like this one do not have this problem. You can recharge the battery at any charge level without affecting its lifespan.Which camera models is this battery suitable for?This battery is compatible with a variety of Canon cameras and camcorders that use the NB-2L or NB-2LH. These include, but are not limited to, the Canon EOS 350D (Rebel XT) and EOS 400D (Rebel XTi) and many camcorders from the MV, MVX, HV, and DC series. Please check the compatibility in your camera’s user manual.How should this battery be disposed of?Batteries must not be disposed of in household waste. As a used device battery, you can return it free of charge to collection points in retail or at municipal recycling centres (e.g. via the GRS collection boxes) to ensure proper and environmentally friendly recycling.
Duracell Camcorder replacement battery DRC4L f
The Duracell DRC4L is a high-quality lithium-ion replacement battery, specially developed as a replacement for the compact Canon NB-4L battery. As a quality product from the world-renowned brand Duracell, this battery offers reliable, long-lasting power supply and the highest level of safety for your camera equipment. It delivers a nominal voltage of 3.7 V and a capacity of 720 mAh and is the ideal choice to extend the life of your trusted Canon IXUS or PowerShot cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precise replacement: 100% compatible with cameras that use the Canon NB-4L battery.Modern Li-Ion technology: High capacity of 720 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge and short circuit.Compact performance: 3.7 V voltage in an extremely slim and lightweight format.Long-lasting power for your Canon cameraThe Duracell DRC4L is the perfect power solution for a variety of popular and ultra-compact Canon digital cameras, especially from the IXUS and PowerShot SD series. It ensures that you have the necessary staying power even for long photo shoots or when travelling. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance up to the last shot.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers crucial advantages over older battery types. It does not suffer from the memory effect, which means you can recharge the battery at any time without worrying about capacity loss. The high energy density enables strong capacity in an extremely compact and slim format, precisely matching the dimensions of the original.Tested quality and safetyDuracell batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. Integrated protection electronics monitor the charging and discharging process, reliably protecting the battery and your valuable camera equipment from overheating, overvoltage, and short circuits. Trust in the tested safety of a global premium brand. Characteristics ModelDuracell Camcorder Replacement Battery DRC4L ApplicationCamera battery CompatibilityReplacement for Canon NB-4L TechnologyLithium-ion (Li-Ion) Nominal voltage (V)3.7 Capacity (mAh)720 Energy (Wh)2.7 Dimensions (L x W x H in mm)approx. 40 x 35 x 6 Weight (g)approx. 18 FAQs about the Duracell DRC4L replacement batteryIs this battery compatible with my original Canon charger?Yes, this replacement battery is designed so that it can be easily charged with the original Canon chargers (e.g. the CB-2LVE) for the NB-4L battery. You can simply continue using your existing charger.What does "no memory effect" mean?The memory effect occurred with older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries, such as this one, do not have this problem. You can recharge the battery at any charge level without affecting its service life.Which camera models is this battery suitable for?This battery is compatible with a variety of Canon cameras that use the NB-4L. These include many models from the Canon Digital IXUS series (e.g. IXUS 100 IS, 110 IS, 120 IS, 130, 220 HS) as well as the PowerShot SD series. Please check compatibility in your camera's user manual.How should this battery be disposed of?Batteries must not be disposed of in household waste. As a used device battery, you can return it free of charge to collection points in stores or at municipal recycling centres (e.g. via the GRS collection boxes) to ensure professional and environmentally friendly disposal.
Duracell Camera replacement battery DR9952 f
Duracell Panasonic e DR9952 for e DMW-BMB9E 7.4V 895mAh
Duracell Camera replacement battery DR9686 f
The Duracell DR9686 is a high-quality lithium-ion replacement battery specially developed as a replacement for the widely used Samsung BP70A battery. As a quality product from the world-renowned Duracell brand, this battery provides reliable, long-lasting power and maximum safety for your camera equipment. It delivers a nominal voltage of 3.7 V and a capacity of 740 mAh and is the ideal choice to extend the life of your proven Samsung digital cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Samsung BP70A battery.Modern Li-Ion technology: High capacity of 740 mAh without memory effect.High safety: Integrated protection electronics against overcharging, deep discharge and short circuit.Compact performance: 3.7 V voltage in an extremely flat and lightweight design.Long-lasting power for your Samsung cameraThe Duracell DR9686 is the perfect energy solution for a wide range of slim Samsung compact cameras in the ES, PL, ST and SL series. It ensures that you have the stamina you need for longer photo shoots, on holiday or at parties. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance up to the last shot.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older types of battery. It does not suffer from the memory effect, meaning you can recharge the battery at any time without fearing a loss of capacity. The high energy density enables solid capacity in an extremely compact and flat design that exactly matches the original’s dimensions.Tested quality and safetyDuracell batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. Integrated protective electronics monitor the charge and discharge process and reliably protect the battery and your valuable camera equipment against overheating, overvoltage and short circuits. Trust in the proven safety of a global premium brand. Features ModelDuracell Camera Replacement Battery DR9686 ApplicationCamera battery CompatibilityReplacement for Samsung BP70A TechnologyLithium-ion (Li-Ion) Nominal voltage (V)3.7 Capacity (mAh)740 Energy (Wh)2.7 Dimensions (L x W x H in mm)approx. 40 x 31 x 6 Weight (g)approx. 18 FAQs about the Duracell DR9686 replacement batteryIs this battery compatible with my original Samsung charger?Yes, this replacement battery is designed so it can be easily charged with the original Samsung chargers for the BP70A battery. You can simply continue to use your existing charging station or charging cable.What does "no memory effect" mean?The memory effect occurred in older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries like this do not have this problem. You can recharge the battery at any charge level without affecting its service life.Which camera models is this battery suitable for?This battery is compatible with a wide range of Samsung cameras that use the BP70A. This includes models from the ES series (e.g. ES65, ES70, ES80), PL series (e.g. PL100, PL120, PL20, PL80), ST series (e.g. ST60, ST70, ST80), as well as SL and WP models. Please check compatibility in your camera's operating instructions.How should this battery be disposed of?Batteries must not be disposed of in household waste. As a used device battery, you can return it free of charge to collection points in retail stores or to municipal recycling centres (e.g. via GRS collection boxes) to ensure proper and environmentally friendly recycling.
Duracell Camera replacement battery DR9714 f
The Duracell DR9668 is a high-quality lithium-ion replacement battery specifically developed as a substitute for the widely used Sony NP-BG1 and NP-FG1 batteries. As a quality product from the world-renowned Duracell brand, this battery offers reliable, long-lasting power supply and the highest safety for your camera equipment. It delivers a rated voltage of 3.7 V and a high capacity of 1050 mAh and is the ideal choice to extend the life of your reliable Sony Cyber-shot cameras.Highlights at a glanceBrand quality: Reliable and long-lasting performance from Duracell.Precisely fitting replacement: 100% compatible with cameras that use the Sony NP-BG1 or NP-FG1 battery.Modern Li-Ion technology: High capacity of 1050 mAh without memory effect.High safety: Integrated protective electronics against overcharging, deep discharge and short circuit.Reliable performance: 3.7 V voltage for a constant and powerful output.Long-lasting power for your Sony cameraThe Duracell DR9668 is the perfect power solution for a wide range of popular Sony Cyber-shot digital cameras from the W, H, T and N series. It ensures that you have the endurance you need even during longer photo shoots, on holiday or at celebrations. Thanks to modern lithium-ion technology, you can rely on low self-discharge when not in use and consistently high performance until the last shot.Reliable lithium-ion technologyThe lithium-ion technology (Li-Ion) used offers decisive advantages over older types of batteries. It does not suffer from the memory effect, which means you can recharge the battery at any time without having to worry about a loss of capacity. The high energy density enables a strong capacity in a compact and lightweight design that exactly matches the dimensions of the original.Tested quality and safetyDuracell batteries are subject to strict quality controls to ensure consistently high performance and maximum safety. Integrated protective electronics monitor the charging and discharging process and reliably protect the battery and your valuable camera equipment from overheating, overvoltage and short circuits. Trust the proven safety of a global premium brand. Features ModelDuracell Camera Replacement Battery DR9668 ApplicationCamera battery CompatibilityReplacement for Sony NP-BG1 / NP-FG1 TechnologyLithium-ion (Li-Ion) Nominal voltage (V)3.7 Capacity (mAh)1050 Energy (Wh)3.9 Dimensions (L x W x H in mm)approx. 42 x 35 x 8 Weight (g)approx. 26 FAQs about the Duracell DR9668 replacement batteryIs this battery compatible with my original Sony charger?Yes, this replacement battery is designed to be easily charged with the original Sony chargers (e.g. BC-CSG) for the NP-BG1 battery. You can simply continue to use your existing charging station.What does "no memory effect" mean?The memory effect occurred with older NiCd batteries and led to a loss of capacity if the battery was not fully discharged before each charge. Modern lithium-ion batteries, such as this one, do not have this problem. You can recharge the battery at any charge status, without impairing its lifetime.Which camera models is this battery suitable for?This battery is compatible with a wide range of Sony Cyber-shot cameras that use the NP-BG1 or NP-FG1. These include, among others, models from the DSC-W series (e.g. W30, W50, W80, W290), the DSC-H series (e.g. H3, H10, H20), the DSC-T series (e.g. T20, T100) as well as the DSC-N series. Please check the compatibility in your camera's manual.How should this battery be disposed of?Batteries must not be disposed of in household waste. As a used device battery, you can return it free of charge to collection points in shops or to municipal recycling centres (e.g. via the GRS collection boxes) to ensure correct and environmentally friendly recycling.
Spare battery for
This is the special 3.6 volt NiMH battery for radio remote controls of the brand Hetronic (often abbreviated as HTC).Attention, important difference: While many Hetronic transmitters (such as Nova-L or Nova-S) run on 9.6 volts, certain series (such as Ergo or special Mini variants) require this 3.6 volt battery. It replaces the original numbers 68300600, 68300900 as well as 68300800. With a capacity of mostly 2,000 mAh (2.0 Ah), it offers significantly more power than the older standard batteries.Highlights at a glanceSpecific 3.6V voltage: This battery is not compatible with the 9.6V systems. It is designed for transmitters that operate at a lower voltage (e.g. hand-held transmitters from the Ergo series).High capacity (2.0 Ah): Modern NiMH cells enable a capacity of approx. 2000 mAh. This ensures very long operating times, often several days with normal use, as 3.6V transmitters usually consume less current.Replaces Hetronic 68300xxx: Fully compatible with part numbers 68300900 (standard NiMH), 68300600 and 68300800.Modern NiMH technology: No memory effect. You can charge the battery at any time. It is the environmentally friendly replacement for older NiCd versions.Compact design: The battery is usually black and rectangular, a little flatter than the 9.6 V blocks, and has specific contacts for the 3.6 V slot.Compatible transmitters (extract)This battery fits mechanically and electrically in the following Hetronic systems (please check the type plate!):Hetronic Ergo: Ergo, Ergo-F, Ergo-M (transmitter in "banana shape" or hand-held transmitter).Hetronic Mini (3.6V): Only for versions that explicitly use 3.6V (many Minis use 9.6V!).Hetronic Nova (3.6V): Special versions. Characteristics ModelReplacement battery for Hetronic 3.6V (type "Pocket") Replaces original no.**68300800**, 68300850, 68100800 (Attention: NOT 68300900!) Chemistry**NiMH** (nickel-metal hydride) Voltage**3.6 V** (3 cells) CapacityTypically **1200 mAh to 2200 mAh** (Depending on cell quality) Compatible transmitters (extract)Hetronic **MINI-HET**, **POCKET**, **ERGO**, **GR** (3.6V versions) DesignSmall black block, often with slightly rounded edges Difference to the 9.6V batterySignificantly smaller and lighter, only 3 cells instead of 8 cells ContactingUsually 4 contacts, but different layout from the 9.6V version Weight (g)approx. 80 - 110 (Very light) FAQs about the Hetronic 3.6V battery (68300900)My "Mini" transmitter previously had a 9.6V battery (square). Does this one fit?No, absolutely not! This is the most common confusion with Hetronic.9.6V battery (68300520): Is square, thicker.3.6V battery (This item): Is often flatter or differently shaped. The part numbers 68300600 and 68300900 clearly indicate 3.6 volt. If you were to put this battery into a 9.6V device (if it fits mechanically), the device would not start (undervoltage).What does "HTC" mean?In the construction industry Hetronic is often mistakenly abbreviated as "HTC" or confused with the mobile phone manufacturer/HBC. The numbers 683... confirm beyond doubt that it is a Hetronic battery.Can I use my old charger?Yes. Hetronic chargers usually recognise the battery type. Make sure that the contacts are clean. Since this battery is NiMH, the charger should be NiMH-compatible (which almost all Hetronic chargers from the last 15 years are).
VISION RBC123 Replacement Battery for
Vision RBC123 replacement battery for APC UPS systems
VISION RBC124 Replacement Battery f
The VISION RBC124 is a high-quality replacement battery kit designed as a direct and reliable replacement for the original APC RBC124 battery unit. Consisting of two high-performance, valve-regulated VRLA batteries, this kit offers a cost-effective and safe solution to restore the full functionality of your APC Back UPS Pro system. Equipped with maintenance-free AGM technology, this kit ensures a fail-safe power supply for your safety-critical applications.Highlights at a glance100% Compatible: Developed as a precision-fit replacement for APC RBC124, ensures simple and quick installation.High reliability: Uses high-quality AGM batteries optimised for demanding UPS operation.Maintenance-free: The leak-proof AGM technology eliminates any need for battery maintenance.Long-lasting: Designed for long-term use in standby operation, to protect your systems for years.Easy replacement: The kit is supplied as a complete set of two batteries, so you can carry out the replacement quickly and easily yourself.Economical solution: Offers the same performance and safety as the original at an attractive price. Powerful performance for safety-critical applicationsThe VISION RBC124 kit is designed to meet the demanding requirements of various APC Back UPS Pro systems. The installed batteries are high-current capable and, in the event of a power failure, can immediately provide the necessary power to safely shut down or continue to operate your connected computers, networks and other critical devices. The stable and reliable performance protects your valuable hardware from damage caused by power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC124 kit are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is safely bound in a glass fibre mat. This makes the batteries absolutely leak-proof and enables operation in any position. The low self-discharge ensures a long shelf life and readiness for use. The robust ABS plastic case of the batteries provides outstanding protection against mechanical impact.Characteristics ModelVISION RBC124 replacement battery Battery typeVRLA AGM (UPS replacement battery kit) Contents2 x 12V AGM batteries Nominal voltage (V)12 (per battery) / 24 (system) Capacity (Ah)9 (typical value, per battery) Charging voltage (float charge)27.0V - 27.6V (system) Charging voltage (cycle use)28.8V - 30.0V (system) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (per battery)Compatible with original dimensions Weight (kg)approx. 5.2 (total weight) ConnectionSuitable for APC UPS models Compatibility (extract)APC BR1200G-GR, BR1500G-GR, BR1500GI FAQs about the VISION RBC124 replacement batteryFor which UPS models is this kit suitable?The VISION RBC124 kit is designed as a replacement for the original APC RBC124 battery unit and is compatible, among others, with the following APC Back UPS Pro models: BR1200G-GR, BR1500G-GR, and BR1500GI. Please check the exact designation of your UPS system before purchasing.Is replacing the battery complicated?No, replacement is usually very easy and can be carried out without technical expertise. Most APC Back UPS Pro systems have an easily accessible battery compartment. You simply need to disconnect and remove the old battery unit and connect and fit the new VISION RBC124 kit. Please ensure correct wiring of both batteries.Do I need to adjust anything on the UPS after replacement?After inserting the new battery, you should switch the UPS on and perform a self-test function if your model provides this. It is also recommended to fully charge the battery in the UPS before first use. A special calibration is generally not necessary for these models.Is it safe to use a third-party replacement battery?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries that often meet or even exceed the specifications of the original batteries. Our RBC124 kit uses only quality-tested batteries, which are designed for use in UPS systems and ensure maximum safety.What is the service life of the VISION RBC124 replacement battery?The service life of the installed batteries in typical standby operation in a UPS system at 20 °C is up to 5 years. The actual service life can be affected by factors such as ambient temperature and the frequency of power failures.What do I need to consider when disposing of the old battery pack?Lead-acid batteries are hazardous waste and must not be disposed of in household waste. You can dispose of your old battery pack at municipal collection points, recycling centres or at any retailer who sells starter batteries, free of charge and in an environmentally friendly manner.
VISION RBC133 Cartridge with replacement battery f
The VISION RBC133 is a high-quality, ready-to-install replacement battery cartridge designed as a direct and reliable replacement for the original APC RBC133 Cartridge. Fitted with high-performance, valve-regulated VRLA batteries, this cartridge offers a cost-effective and safe solution to restore the full performance of your APC Smart UPS system. Equipped with maintenance-free AGM technology, this product ensures fail-safe power for your business-critical applications.Highlights at a glance100% Compatible: Developed as a precision-fit replacement cartridge for APC RBC133, enabling simple and fast hot swap installation.Plug and Play Installation: The cartridge comes fully assembled and wired for a replacement in minutes without interrupting operation.High Reliability: Uses only high-quality AGM batteries that are optimised for demanding UPS operation.Maintenance-Free: The leakproof AGM technology renders any battery maintenance unnecessary over the entire service life.Durable: Designed for long service life in standby operation to protect your systems reliably for years.Economical Solution: Provides the same performance and safety as the original at an attractive price.Powerful performance for safety-critical applicationsThe VISION RBC133 Cartridge is designed to meet the demanding requirements of APC Smart UPS systems of the 3000VA class. The installed batteries are high-current capable and can provide the required power immediately in the event of a power failure, ensuring your connected servers, network storage and other critical devices can be safely shut down or continue operation. The stable and reliable performance safeguards your valuable hardware against damage from power fluctuations and outages.Robust technology for demanding environmentsThe batteries used in the RBC133 Cartridge are based on proven VRLA technology (Valve Regulated Lead Acid) with an AGM system (Absorbent Glass Mat), in which the electrolyte is securely embedded in a glass fibre mat. This makes the batteries completely leakproof and allows operation in any position. Low self-discharge ensures long shelf life and readiness for use. The robust ABS plastic battery case provides excellent protection against mechanical impact.Features ModelVISION RBC133 replacement battery cartridge Battery typeVRLA AGM (UPS replacement battery cartridge) ContentsPre-assembled cartridge, Plug & Play Nominal voltage (V)48 (System voltage) Capacity (Ah)5 (Typical value) Charging voltage (float)54.0V - 55.2V (System) Charging voltage (cyclic operation)57.6V - 60.0V (System) Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)Compatible with original dimensions Weight (kg)approx. 11.5 ConnectionMatching APC system plug Compatibility (excerpt)APC SMT3000RMT2U, SMX3000RMLV2U FAQs about the VISION RBC133 replacement battery cartridgeFor which UPS models is this cartridge suitable?The VISION RBC133 cartridge is designed to replace the original APC RBC133 battery unit and is compatible, among others, with the following APC Smart UPS models: SMT3000RMT2U, SMX2000RMLV2U, SMX3000RMHV2U, SMX3000RMLV2U. Please check the exact designation of your UPS system before purchase.Is replacing the battery complicated?No, replacement is very simple and can be carried out during operation (hot swap) without technical expertise. The APC UPS systems have a readily accessible battery compartment. You simply need to remove the old cartridge, disconnect the plug, connect the new VISION RBC133 cartridge and slide it back in.Do I need to set anything on the UPS after replacement?After inserting the new cartridge, the UPS usually recognises the replacement automatically. It is recommended to note the replacement date of the battery via the software or the display and to perform a self-test function. Runtime calibration can be useful to ensure an accurate remaining run time display.Is using a replacement cartridge from third-party manufacturers safe?Yes, absolutely. VISION is a renowned manufacturer of high-quality AGM batteries. Our RBC133 cartridge is expertly assembled, tested and uses only quality-checked batteries designed for use in UPS systems to ensure maximum safety.What service life does the VISION RBC133 replacement cartridge have?The service life of the installed batteries in typical standby operation in a UPS system at 20 °C is up to 5 years. The actual service life may be affected by conditions such as ambient temperature and the frequency of power failures.What do I need to observe when disposing of the old cartridge?Lead batteries are hazardous waste and must not be disposed of with household waste. You can dispose of your old cartridge free of charge and in an environmentally friendly way at municipal collection points, recycling centres or at any retailer who sells starter batteries.