Skip to main content Skip to search Skip to main navigation
Menu

Yuasa SWL+2250 Industrial VRLA battery - 12V / 86Ah (High Rate Plus)

Description

Product information

The Yuasa SWL+2250 is one of the most powerful 12V models in the SWL+ Series. With a remarkable capacity of 86 Ah (C20), this battery offers an extremely high energy density with consistently compact dimensions.

This VRLA-AGM block was developed to replace older standard batteries in the 75-80Ah class (such as the NPL78-12) and at the same time to offer significantly more power and a longer service life. Thanks to the advanced plate technology and the Eurobat "Very Long Life" classification, the SWL+2250 is the ideal solution for demanding UPS systems where every centimetre of footprint and every year of service life counts.

Highlights at a glance

  • Maximum capacity (86 Ah): With 86 Ah (when discharged for 20 hours), this battery delivers up to 10-15% more energy than conventional batteries of the same format (often 75-78 Ah). This noticeably extends your autonomy time in case of a power failure.
  • SWL+ High Rate Performance: The figure "2250" stands for the enormous power output (watts) at short discharge times. The SWL+ series is optimised to provide high currents without heavy voltage drop, which is essential for modern IT loads.
  • Eurobat "Very Long Life": Classified for a service life of 12+ years (design life up to 15 years). The investment pays off due to less frequent replacement intervals and lower maintenance requirements.
  • HT Element X Alloy™: The patented hybrid grid technology minimises internal corrosion and water loss. This makes the battery more resistant to ageing, even if the environmental conditions are not always perfect.
  • Maintenance-free AGM technology: Sealed and valve regulated (VRLA). The electrolyte is held in the glass mat, which permits operation in almost any position (apart from long term upside-down) and prevents acid stratification.
  • Compatible case: Despite the increased output, the SWL+2250 uses the standard case size (approx. 380 mm length), which allows it to serve as a direct "upgrade" in existing battery cabinets.

Compatibility & upgrade potential

The SWL+2250 is often mechanically compatible with the widely used NPL78-12 or SWL2500 (depending on year and exact dimensions). The key advantage when switching to the SWL+2250 is the power density: you get significantly more kilowatts on the same footprint. This is especially important in data centres where space is expensive.

Assembly & operating instructions

  • Weight warning: With approx. 27.5 kg this block is very heavy. When mounting on upper rack levels, pay attention to the shelf load and use lifting aids.
  • Connection: The M6 terminal bolts must be tightened to 4.8 Nm. Check the torque after the first weeks of operation, as lead can settle slightly under pressure ("cold flow").
  • Charging voltage: Trickle charge (float) at 2.275 V/cell (±1%) at 20°C.
  • Temperature: The optimum life is achieved at 20°C. Permanently higher temperatures (e.g. 30°C) chemically halve the service life of VRLA batteries.
 

Features

ModelYuasa SWL+2250 (High Rate Plus)
Voltage12 V
Capacity**86.0 Ah** (C20) / approx. **76-80 Ah** (C10)
Technology**AGM VRLA** (recombination technology, maintenance-free)
PerformanceOptimised for short discharge times with high currents
Design Life**10 - 12 years** (EUROBAT: Long Life)
Dimensions (L x W x H in mm)approx. 261 x 168 x 202 (height above terminals approx. 227)
Connection**M6 female thread** (Female Thread)
Weight (kg)approx. 26.0 - 27.0 kg
ApplicationLarge UPS systems, emergency power, telecommunications
 

FAQs about the Yuasa SWL+2250

Can I use the SWL+2250 as a replacement for the NPL78-12?

Yes, in most cases. The dimensions (length approx. 380mm, width 166mm) are industry standard. However, the SWL+2250 offers 86 Ah instead of 78 Ah and a longer service life (12+ years vs. 10 years). Just check that your charger is strong enough to recharge the slightly higher capacity in the time required (usually not a problem).

Is the SWL+2250 also available in "FR" (flame retardant)?

Yes. Like almost all batteries in the SWL+ series, the 2250 is often available as SWL+2250FR. When using the battery in public buildings or sensitive IT environments, you should expressly order the FR version (UL94 V-0).

Is this battery suitable for motorhomes?

Conditionally, but not ideal. The SWL+ series is a pure standby battery (emergency power). It delivers extremely high current for a very short period. However, in a motorhome the battery is discharged slowly and recharged daily (cyclic operation). For this purpose, batteries of the Yuasa REC, NPC or special gel/LiFePO4 batteries are more economical and durable.

Properties

Capacity: 86Ah
Connections: M8
Tension: 12V

Reviews 0

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.