Varta Lithium photo battery 2CR5 6 V

The XCELL XP7-12 is a valve-regulated AGM battery with 12 volts and a rated capacity of 7 Ah (C20). It impresses with its compact dimensions, high operational reliability and long service life. Thanks to its robust construction and low self-discharge, it is ideally suited for use in security and emergency power systems, medical technology, measurement and control technology, telecommunications, and in numerous mobile and stationary applications.Highlights at a glanceCompact power: 12 V, 7.0 Ah (20h)VdS approved: G 120023 for safety-related applicationsFlexible usage: Any operating position is possible (except permanently upside down)Long-lasting: Up to 5 years design life at 20 °CHigh reliability: Low self-discharge <3 % per month at 25 °CRobust housing: ABS UL94 HBReliable power supply for a wide range of applicationsXCELL ’s XP7-12 delivers consistent performance even under demanding conditions. AGM technology ensures efficient gas recombination, making the battery virtually maintenance-free. With a maximum discharge current capacity of 105 A (5 seconds), it is also suitable for applications with short-term peak loads.Efficiency meets durabilityIn standby mode, the battery should be charged to a voltage of 2.25–2.30 V/cell. For cyclic operation, a charging voltage of 2.45–2.50 V/cell is recommended. The temperature compensation is –3 mV/cell/°C in standby mode and –4 mV/cell/°C in cyclic operation. The recommended maximum current is 0.3C (approx. 2.1 A). In cyclic use, the battery achieves several hundred charge and discharge cycles, depending on the depth of discharge.Technology for flexible applicationsThe operating temperature range of the cells is between –15 °C and +50 °C during charging. During discharge, it is –20 °C to +60 °C, and during storage –20 °C to +50 °C. T1 or T2 plug-in connectors are available for the electrical connection. The recommended tightening torque for this is between 2 and 3 Newton metres. Each cell is also equipped with a safety valve, which further enhances operational safety.Features  ModelXCELL XP7-12 Battery typeVRLA AGM (Standby / General Purpose) Nominal voltage (V)12 Capacity (Ah)7.0 (at 20-hour rate) Maximum discharge current105A (for 5 seconds) Charging voltage (trickle charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 2.1 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, CE, UL  FAQ on the XCELL XP7-12 industrial batteryFor which applications is the XP7-12 ideally suited?The XCELL XP7-12 is ideal for emergency power supply, security and fire alarm systems, medical technology, telecommunications, measurement and control technology, as well as mobile devices with cyclic energy requirements.How cycle-stable is the XP7-12?At a 30% depth of discharge, the battery achieves over 1,000 charge and discharge cycles. At higher depths of discharge, the service life is reduced accordingly, but remains in the range of several hundred cycles.What are the specific safety features?The battery is equipped with pressure relief valves. Like all VRLA batteries, it may release small amounts of hydrogen. It should therefore not be operated in airtight enclosures and adequate ventilation must be ensured.Which chargers are suitable for the XP7-12?Constant-voltage chargers designed for VRLA AGM batteries are recommended. Correct setting of the charging voltage and temperature compensation is crucial for a long service life.How is the battery installed?The battery can be installed in any position except permanently upside down. Connection is via T1 or T2 plug-in terminals with a tightening torque of 2–3 Nm. 

The XCELL XP7/12F2 impresses as a reliable 12-volt lead-acid battery with 7.2 Ah (20-hour rate) capacity, robust AGM technology and compact dimensions. Equipped with Faston terminals, this battery is ideal for security and emergency power systems, telecommunications and mobile devices. With a service life of up to 10 years in standby mode, it offers a stable power supply with minimal maintenance.Highlights at a glanceRobust capacity: 7.2 Ah at a 20-hour discharge rate for a wide range of applicationsVdS approved: G 116061 for safety-related applicationsLong service life: Up to 10 years standby service life at 20 °CHigh discharge reserves: Maximum discharge currents of up to 108 A for 5 secondsTemperature-resistant: Powerful from -15 °C to +50 °CCompact design: Only 151 x 65 x 100 mm at approx. 2.26 kgStrong performance for demanding applicationsThe XCELL XP7/12F2 is the ideal solution for applications that require a compact design combined with high energy density. Typical areas of application include uninterruptible power supplies (UPS), safety-relevant lighting systems, medical devices, alarm systems and other industrial applications. Thanks to its absorbent glass mat technology, the battery offers reliable performance even during short-term load peaks.Efficient energy for continuous operationThis battery is characterised by a low self-discharge of only around 9 % in 3 months at 25 °C, which means it is quickly ready for use even after longer periods of storage. Its charging characteristics support both standby mode with a recommended voltage of 13.60 to 13.80 V and cyclic use with 14.50 to 14.90 V. With a recommended max. charging current of 2.16 A, the battery remains safe and efficient in operation.Reliable technology for the highest demandsAGM technology ensures leak-proof, maintenance-free operation with an internal gas recovery system. The XCELL XP7/12F2 can be installed in any position (except upside down) and reliably withstands temperatures between -15 °C and +50 °C during discharge operation. Its high cycle resistance and UL and CE certifications underline its suitability for demanding industrial environments.Features  ModelXCELL XP7-12F2 Battery typeVRLA AGM (Standby / General purpose) Nominal voltage (V)12 Capacity (Ah)7.0 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 2.1 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, CE, UL  FAQs about the XCELL XP7/12F2 lead-acid batteryHow long is the battery service life?The XCELL XP7/12F2 is designed for a service life of up to 10 years in standby mode at 20 °C.What is the battery particularly suitable for?It is ideal for applications such as UPS systems, emergency lighting, medical devices, telecommunications systems and mobile electronic devices.Can the battery also be used at low temperatures?Yes, the battery works reliably in a discharge temperature range from -15 °C to +50 °C.Does the battery need regular maintenance?No, the battery is maintenance-free thanks to its sealed, valve-regulated AGM design.What charging parameters need to be observed?A charging voltage of 13.60 – 13.80 V is recommended for standby mode, and 14.50 – 14.90 V for cyclic operation. The maximum charging current should not exceed 2.16 A.