Varta Lithium button cell CR1220 3V (single blister)

The Vision CP12120F2 is a high-quality, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 12 Ah. This all-purpose battery from the CP Series was developed for high reliability in standby operation and for light cyclic applications. Equipped with maintenance-free AGM technology, this battery offers safe and long-lasting energy supply for a wide range of applications, from security technology to emergency power supply.Highlights at a glanceReliable capacity: 12 Ah at 12 V for a constant and long-lasting energy supply.Long service life: Designed for a service life of up to 5 years in standby operation at 20°C.Maintenance-free: Leakproof and sealed AGM technology with a gas recombination rate of over 99%.High current capacity: Suitable for devices that require high inrush current for short periods.Flexible installation: Operation is possible in all positions, except permanent upside-down use.Tested quality: Manufactured according to ISO9001 and ISO14001 standards for consistently high quality.Powerful performance for versatile applicationsThe Vision CP12120F2 provides a capacity of 12 Ah at a 20-hour discharge. It is designed as a general-purpose battery and is effective both in standby parallel operation (float) and with occasional cyclical discharges. With a maximum discharge current of 180A for 5 seconds, this battery is also ideally suited for short-term power peaks, as required in UPS systems or in security technology.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), where the electrolyte is bound in a glass fibre mat, the CP12120F2 is absolutely maintenance-free and leakproof. This ensures safe operation in sensitive environments. The low self-discharge rate of around 3% per month enables long shelf life with high operational readiness. The robust ABS plastic housing offers excellent protection against mechanical influences.Features  ModelVision CP12120F2 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 98 Weight (kg)approx. 3.5 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12120F2 lead-acid batteryFor which applications is the CP12120F2 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Uninterruptible power supplies (UPS)Security and alarm technologyFire alarm systems (BMA)Emergency lightingMedical devicesTelecommunication systemsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leaking.What is the service life of the CP12120F2?The service life in standby operation (e.g. in a UPS system) is up to 5 years at an ambient temperature of 20°C and thus corresponds to the EUROBAT category "Standard Commercial".What is the difference between this battery and a purely cyclic type?The CP12120F2 is a general-purpose battery optimised for standby operation with occasional discharges. A purely cyclic battery is specially designed for frequent and deep discharges (e.g. in an electric wheelchair). For such applications, a cyclic type would deliver a longer service life.What are the charging parameters for this battery?Float charge: The recommended voltage at 20°C is between 13.5V and 13.8V.Cyclic charge: For occasional cyclic charging a voltage between 14.4V and 15.0V is recommended.Maximum charging current: The charging current should not exceed 3.6 A to avoid impairing service life.What are the temperature ranges and storage conditions?Charging: 0°C to +40°CDischarging: -20°C to +50°CStorage (fully charged): -20°C to +40°CSelf-discharge: about 3% per month at 20°C. For longer storage, it is recommended to recharge the battery every 6 months. 

The XCELL XP2.3-12 is a slim 12 volt AGM lead-acid battery with a nominal capacity of 2.3 Ah. It provides reliable power supply in safety-relevant and industrial applications and, with VdS G 115071, fulfils the requirements for professional use.Highlights at a glanceReliable capacity: 2.3 Ah at 20 hours to 10.5 VVdS recognised: G 115071, additionally UL and CE, manufactured to ISO 9001Power reserve: up to 34.5 A discharge current for 5 secondsSlim design: 178 x 35 x 67 mm at approx. 0.9 kgMaintenance-free: valve-regulated AGM technology with ABS housingLow self-discharge: 91 per cent residual capacity after 3 months at 25 °CApplications and performanceThe XP2.3-12 is suitable for alarm and security equipment, emergency lighting, fire alarm systems, communications and measuring devices, as well as control and regulation technology. The internal impedance of approx. 60 mΩ (fully charged, 25 °C) supports stable voltage supply, even during short-term load peaks.Charging parameters and operationFor standby operation, 13.60 to 13.80 V at 25 °C with temperature compensation of minus 18 mV per °C is recommended. In cyclic operation, the end-of-charge voltages are 14.50 to 14.90 V at 25 °C, compensation minus 30 mV per °C. The maximum charging current is 0.69 A. The permissible temperature range is from minus 15 °C to plus 50 °C during discharge, minus 10 °C to plus 50 °C during charging, and minus 20 °C to plus 50 °C for storage.Dimensions and connectionThe T1 flat plug connectors made of copper allow quick integration into existing systems. The compact, elongated design means the battery can be positioned particularly well in narrow housings and racks.Features  ModelXCELL XP2.3-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20h rate) Maximum discharge current34.5A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic use)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)approx. 0.94 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP2.3-12What is the expected service life for the XP2.3-12 in standby operation?At 20 °C, the XP2.3-12 battery is designed for 3 to 5 years in float operation. Regular test cycles and correct charging voltage increase availability.For which applications is the XP2.3-12 battery suitable?Preferred for safety-related systems such as fire alarm systems and intruder alarm systems, emergency lighting, communications and measuring devices, as well as controls with 12 volt supply.Which charging voltages must be observed?Float 13.60 to 13.80 V at 25 °C, cyclic operation 14.50 to 14.90 V. Please observe the respective temperature compensation.What is the self-discharge rate?At 25 °C, about 91 per cent capacity remains after 3 months, 82 per cent after 6 months and 65 per cent after 12 months of storage.Which connectors are present on the XP2.3-12?The XP2.3-12 is equipped with T1 flat plug connectors made of copper for quick, secure installation. 

The KINGFA nitrile disposable gloves in size M offer excellent protection, comfort and high tactile sensitivity for a wide range of professional applications. Made of high-quality nitrile butadiene rubber, these gloves are an excellent latex-free alternative, ideal for users with latex allergies. They are powder-free, non-sterile and designed for single use in the fields of medicine, laboratory, cleaning, cosmetics and food handling.Highlights at a glanceExcellent protection: Provide a reliable barrier against viruses, bacteria and chemicals in accordance with EN ISO 374.High wearing comfort: The soft, elastic material fits the hand like a second skin and enables excellent tactile sensitivity.Allergy-friendly: 100% latex-free to avoid type I allergy risks.Powder-free: Reduces the risk of skin irritation and contamination.Versatile in use: Suitable for use in medicine, laboratory, food industry and cleaning sector.Reliable protection in a wide range of applicationsKINGFA nitrile gloves are the ideal choice for professional users who need reliable protection. In the medical field they serve as examination gloves to protect against contamination. In laboratories they protect against chemical splashes, while in food processing or the catering industry they ensure hygienic handling of food. They are also the perfect, resilient solution for cleaning work, in cosmetic or tattoo studios.Superior nitrile materialNitrile offers decisive advantages over latex or vinyl. It is mechanically very resilient and offers high puncture and tear resistance. At the same time it is very elastic and ensures a comfortable feel without signs of fatigue, even with longer application times. The textured fingertips also ensure a secure grip in wet and dry conditions.Tested quality and safetyThese disposable gloves meet all relevant European standards for medical gloves (EN 455) and personal protective equipment (EN ISO 374). They are classified as Class I medical products and offer tested protection. Manufacturing is subject to strict quality controls to ensure consistently high product quality and maximum user safety. Delivery is in a practical dispenser box. Features  ModelKINGFA nitrile disposable gloves SizeM (Medium) MaterialNitrile rubber ColourBlue Powder-freeYes Quantity per box100 pieces FeaturesNon-sterile, ambidextrous fit, textured fingertips StandardsEN 455, EN 374  FAQs about KINGFA nitrile disposable glovesWhat is the advantage of nitrile over latex?Nitrile is synthetic rubber and contains no latex proteins that can cause allergies. It is therefore the safer choice for people with a known or suspected latex allergy. In addition, nitrile often offers higher resistance to chemicals, oils and greases as well as better puncture resistance.What does "powder-free" mean?Powder-free gloves are manufactured by a special process to make donning without powder (usually corn starch) easier. This prevents skin irritation, drying of the skin and avoids contamination of samples or food by powder particles.How do I determine the correct glove size?The correct size is crucial for comfort and safety. Measure the circumference of your hand at the widest point (over the knuckle, without thumb). Size M generally fits a hand circumference of approx. 20-21 cm. A well-fitting glove should fit snugly without restricting blood circulation.How should these gloves be disposed of?As a single-use product, gloves are disposed of in residual waste after use. If the gloves have come into contact with hazardous chemicals or infectious material, they must be disposed of according to company or official regulations for contaminated waste.

The VARTA CR2450 is a high-quality 3-volt lithium coin cell with a very high capacity, developed to provide reliable and extremely long-lasting energy for demanding electronic devices. Based on proven lithium manganese dioxide technology (Li-MnO2), it offers one of the highest energy densities in the coin cell format. Delivered in a protective single blister, it is the ideal choice for smart home sensors, medical technology and other devices where maximum service life is crucial.Highlights at a glanceVery high capacity: Offers exceptionally long life for energy-demanding applications.Reliable performance: Constant energy output ensures perfect functioning of your electronic devices.Long shelf life: With up to 10 years shelf life, extremely durable and always ready for use.Wide temperature range: Works reliably even under demanding thermal conditions.Safe packaging: The child-resistant single blister guarantees freshness and protects the cell until use.Reliable energy for demanding electronicsThe VARTA CR2450 is the preferred energy source for a wide variety of devices where maximum autonomy and minimal maintenance are essential. Its main field of application is smart home and security sensors (e.g. thermostats, door and window contacts), medical technology, remote controls with displays, and industrial backup applications that need to guarantee a high energy reserve over several years.Superior lithium manganese dioxide technologyLithium manganese dioxide technology (Li-MnO2) enables a high nominal voltage of 3 volts and extremely low self-discharge of less than 1% per year at room temperature. This guarantees maximum operational readiness even after many years of storage. Its high capacity and stable performance curve are the key to reliability in long-term "fit and forget" applications.Designed for maximum reliability and safetyThe CR2450 is manufactured to the highest quality standards to ensure maximum reliability and leakproof performance. This protects your valuable electronic devices from damage. The protective and child-resistant single blister ensures the battery retains its full power until use and can be stored safely protected from short-circuit and external influences. Characteristics                                                                                                                                                        Model              VARTA lithium coin cell CR2450 (single blister)               Battery type              Lithium manganese dioxide (Li-MnO2)               Nominal voltage (V)              3,0               Capacity (mAh)              610               Diameter (mm)              24,5               Height (mm)              5,0               Weight (g)              6,2        FAQs about the VARTA lithium battery CR2450What does the designation CR2450 mean?The designation provides information about the features and size of the cell. "C" stands for lithium chemistry, "R" for the round shape. The numbers "2450" correspond to the dimensions: 24.5 mm in diameter and 5.0 mm in height.Is this battery rechargeable?No. This is a lithium primary battery. It must never be recharged under any circumstances. Attempting to charge it is extremely dangerous and may cause fire or explosion.What is the advantage over smaller coin cells such as the CR2032?The main advantage of the CR2450 is its nearly three times higher capacity. It contains significantly more energy and therefore enables much longer operation in devices with higher energy consumption or in cases where particularly long maintenance intervals of several years are desired.How should this battery be disposed of?Batteries must not be disposed of in household waste. Please take the empty battery to the designated collection points in retail or municipal recycling centres to ensure environmentally friendly disposal.

The Varta Longlife Power 4906, internationally standardised as LR6 (AA/Mignon), is the powerful and versatile all-round battery for professional and industrial applications with high energy requirements. This powerful alkaline battery has been specially developed for devices that require a high and often fluctuating power output. The practical 4-pack foil packaging is optimised for professional use and facilitates handling and stocking in a commercial environment.Highlights at a glancePowerful energy: Developed for devices with high and fluctuating energy requirements.Professional reliability: Guarantees constant and long-lasting performance for commercially used devices.Optimised packaging: The 4-pack foil packaging is ideal for easy packaging and service requirements.Long shelf life: With 10 years of shelf life, perfect for stockpiling with minimal self-discharge.Guaranteed quality: Proven Varta product performance, made in Germany.Powerful in professional applicationsThe Varta Longlife Power LR6 is the ideal choice for a wide range of professional devices that require more than just standard power. It is used in medical technology (e.g. mobile ECG devices, infusion pumps), in security technology (wireless motion detectors, electronic locking systems), in industry (measuring devices, hand scanners) as well as in the event sector (wireless microphones, pocket transmitters). Its ability to deliver high power peaks ensures the reliable operation of sophisticated electronics.Reliable and powerful alkaline technologyThe proven alkaline-manganese technology (Zn/MnO2) of the Longlife Power series is designed for high power output. It offers superior performance in energy-intensive devices compared to standard alkaline batteries. The high-quality workmanship "Made in Germany" also ensures maximum leakage safety and protects your valuable professional equipment.Efficiency for professional useThe Varta Longlife Power series in foil packaging is consistently geared towards the needs of professional users. Delivery in foil-wrapped 4-packs makes stockholding easier and ensures needs-based distribution to service technicians or for equipping workstations. The guaranteed Varta quality and long shelf life offer maximum planning and supply security for your company. Battery features                                                                                                                                                          Model              Varta Longlife Power 4906 / AA (foil of 4)               Battery type              Alkaline manganese               Rated voltage (V)              1.5               Capacity (mAh)              approx. 2950               Diameter (mm)              14.5               Height (mm)              50.5               Weight per cell (g)              23.8        FAQs about the Varta Longlife Power LR6 batteryWhat is the difference between "Longlife Power" and "Industrial Pro"?Both lines are aimed at professional users. "Longlife Power" (formerly High Energy) is designed as a powerful all-rounder for devices with high, often fluctuating energy requirements (e.g. measuring devices, wireless microphones). "Industrial Pro" is designed for maximum reliability and a constant power output for OEM applications and safety-relevant devices (e.g. smoke detectors, long-term sensors).What are the advantages of the 4-pack foil packaging?The foil packaging (shrink wrap) joins four batteries into a compact and robust unit. This is ideal for supplying with new devices (OEM), for equipping service kits or for easy and quick distribution to employees without having to handle loose batteries.Is this battery suitable for initial equipment (OEM)?Yes, its high quality and long shelf life make it a very good choice for the initial equipment of devices that require a powerful energy source. For applications where guaranteed long-term stability is a priority, the "Industrial Pro" series is a possible alternative.Can I also use these batteries in devices with low power requirements?Yes, this is possible. However, for devices with very low and constant energy requirements (e.g. remote controls, wall clocks), the batteries of the "Varta Longlife" series are the most economical choice, as these are optimised for maximum lifespan at low load.How should this battery be disposed of?Batteries must not be disposed of with household waste. Please take used batteries to the designated collection points in retail outlets or municipal recycling centres to ensure environmentally friendly disposal.

The Vision CP12240HX is a highly reliable, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 24 Ah capacity, specially designed for demanding standby operation with high discharge currents. Equipped with maintenance-free AGM technology and a service life of up to 10 years, this high-current battery offers an extremely safe and long-lasting emergency power supply for critical applications. Whether in powerful UPS systems or medical technology, the CP12240HX meets the highest standards of quality and operational safety.Highlights at a glanceHigh current capability: Optimised for high discharge currents, ideal for powerful UPS systems and other critical loads.Long service life: Designed for a service life of up to 10 years in standby mode (float) at 20 °C.High capacity: 24 Ah at 12 V for a long-lasting power supply in the event of an emergency.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Low self-discharge: Enables a long shelf life and ensures a high level of operational readiness.Flexible mounting: Operation is possible in all positions, except for permanent overhead use.Reliable performance for safety-critical applicationsThe Vision CP12240HX delivers a nominal capacity of 24 Ah at a 20-hour discharge rate. Its particular strength lies in the ability to deliver very high currents for short periods, making it ideal for use in uninterruptible power supplies (UPS) that need to supply high loads on start-up. Its design for standby parallel operation ensures that it provides full power immediately in the event of a power failure.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with an electrolyte bound in glass fiber fleece (AGM system), the CP12240HX is absolutely maintenance-free and leak-proof. The battery has self-regulating safety valves that ensure safe pressure equalisation in the event of overcharging. The low self-discharge rate of less than 3% per month at 20°C enables long-term storage. The robust housing made of impact-resistant ABS plastic is also available in a flame retardant version according to UL94:V0 upon request.Features  ModelVision CP12240HX Battery typeVRLA AGM (high current / long life) Nominal voltage (V)12 Capacity (Ah)24 (at 20h rate) Maximum discharge current360A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 10 years (EUROBAT: High Performance) Dimensions (L/W/H, mm)166 x 175 x 125 Weight (kg)approx. 8.1 ConnectionM5 screw connection CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP12240HX lead-acid batteryFor which applications is the CP12240HX suitable?The battery is ideal for demanding standby applications with high power requirements:Uninterruptible power supplies (UPS)Data centres and telecommunication systemsSafety lighting and emergency lighting systemsFire alarm systems (FAS) and intruder alarm systems (IAS)Medical and clinical devices What does the designation "HX" and "high-current capable" mean?The designation "HX" on Vision batteries stands for "High Rate" or high current. These batteries are designed with thinner lead plates and a larger active surface area, which reduces the internal resistance. As a result, they can deliver significantly higher currents for a short time than standard batteries of the same capacity, which is crucial for starting motors or operating UPS systems.What is the difference to a standard 10 year battery?Although both have a long service life in standby operation, the CP12240HX is specially optimised for high performance. A standard long-life battery is designed for the longest possible service life at lower discharge currents. The HX type is the first choice when maximum power output is needed in the first minutes of a power failure.What charging voltage is correct for this battery?For maximum service life in standby operation, the float charge voltage at 20°C should be between 13.5 V and 13.8 V (2.25 V to 2.30 V per cell). Temperature compensation is strongly recommended for optimal battery maintenance.Is the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with water is required and it can be safely operated in equipment and indoors.Can I use this battery for a solar system?Although the battery would technically work, it is not ideal for this purpose. It is optimised for standby operation. For solar applications that require daily charge and discharge cycles, we recommend cycle-resistant batteries (recognisable by the "DX" at Vision), as these achieve a significantly longer service life in cyclic operation.