Universal quick charger for HBC Radiomatic crane batteries (NiCd & NiMH)
Product information
This intelligent universal charger is the "all-in-one" solution for your fleet. Instead of using a separate charger for each HBC battery type (3.6V or 6V, small or large), this device automatically detects the type of battery inserted and adjusts the charging current and voltage accordingly.
It replaces the original HBC chargers (e.g. QE10860, QA10860, IL series) and is suitable for both older NiCd batteries as well as for modern NiMH batteries suitable.
Highlights at a glance
- Multi-voltage (3.6V & 6V): The charger automatically detects whether you have inserted a 3.6V battery (e.g. FuB 05AA) or a 6V battery (e.g. FuB 3A). No manual switches are required.
- Multi-chemistry (NiCd & NiMH): You can charge mixed battery types. Whether it’s an old red/black NiCd battery or a new orange NiMH battery – the charging electronics (Delta-U cut-off) control the process safely and prevent overcharging.
- Dual-Power (230V & 12/24V): Usually two cables are included:
- Power supply for the socket (100-240V).
- Car adapter for the cigarette lighter (12V/24V) – ideal for charging in lorries, construction cranes or service vehicles.
- LED status indicator: Basic traffic-light logic indicates the status:
- Red: Battery is being fast charged.
- Green: Battery is full (trickle charge active).
- (Optional depending on model: flashing if faulty).
- Custom-fit charging cradle: The charging slot is shaped so that the common HBC battery blocks (FuB 3A, FuB 05AA, FuB 9AA, FuB 10AA) make secure contact.
Compatible battery types
This charger covers the most common HBC batteries (please note the design):
- The "small one" (3.6V):
- BA225030, BA205030, BA205000 (FuB 05A, FuB 05AA)
- The "flat one" (6V):
- BA223030, BA203060, BA203061 (FuB 3A, FuB 03A)
- The "compact 6V":
- BA209000, BA209060 (FuB 9A, FuB 9AA)
- The "large one" (6V):
- BA214060, BA214061, BA213020 (FuB 10AA, FuB 10XL, FuB 78AA)
- Note: With some universal chargers, an adapter is required for the very large FuB 10 block, or the housing is designed so that this one also fits.
Features
| Model | Universal fast charger for HBC Radiomatic |
| Compatible battery types | BA225030, BA214060, BA214061, BA213020, FuB 05AA, FuB 10AA, FuB 10XL, FuB 78AA |
| Chemistry compatibility | **NiCd** and **NiMH** (automatic detection) |
| Voltage range | **2.4V to 6.0V** (automatic switching) |
| Charging current | approx. **1000 mA to 1500 mA** (fast charging) |
| Charging method | **Delta-Peak / -dV monitoring** (prevents overcharging and "boiling" of the batteries) |
| Input voltage | **100-240V AC** (worldwide) & **12V-24V DC** (lorry electrical system) |
| Status indicator | LED: Red (charging), Green (full/trickle), Flashing (fault/failure) |
| Physical fit | Suitable for the large rectangular blocks (FuB 05 / FuB 10 / FuB 78) |
| Limitation | Not suitable for the small square FuB 9AA (requires adapter or different charging cradle) |
| Protective functions | Overheating protection, short-circuit protection, reverse polarity protection |
FAQs on the universal crane charger
How long does charging a 2000 mAh battery take?
That depends on the charging current. With a typical charging current of approx. 800-1000mA, charging a completely empty 2000 mAh battery takes about 2.5 to 3 hours. Once the battery is full, the device switches to "trickle charge" (green). You can therefore also leave the battery in it overnight.
Can I also charge batteries from other manufacturers with it?
No. The charging cradle is mechanically specific to the contacts and housing shapes of HBC Radiomatic shaped. Batteries from Hetronic, Autec or Scanreco do not fit in mechanically.
My battery gets warm while charging. Is that normal?
Yes. NiMH batteries become hand-warm, especially towards the end of the charging process. The intelligent charger detects this temperature rise (or the voltage drop) and then switches off. However, if the battery becomes hot, the battery is probably defective (internal resistance too high).
Login