Solar cable black 100m 6mm² IEC62930 – SOLS6100 for high-performance PV systems

The Growatt TPM-V3 (Three Phase Meter) is a highly precise measuring device for recording the energy flow in 3-phase grids. It is the key component for any Growatt PV system looking to optimise self-consumption, implement zero export, or control a battery storage system.By transmitting real-time consumption and feed-in values to the inverter, the smart meter enables intelligent energy distribution and provides seamless visualisation of your energy management via the Growatt online portal (ShineServer/ShinePhone).Highlights at a glanceHigh measurement accuracy: Records currents, voltages and active power with extremely low error tolerance (Class 1) to ensure precise system control.Real-time monitoring: Delivers instant data on current household consumption, grid feed-in and grid import directly to Growatt monitoring.Supports zero export: Allows inverter configuration for dynamic power reduction if no energy may be fed into the public grid.Simple DIN rail mounting: Compact design for space-saving installation in standard meter cabinet or sub-distribution board.Direct measurement up to 80A: Can be integrated directly into the phase path in most households without external current transformers.RS485 interface: Fast and stable communication with the inverter via the Modbus RTU protocol.Areas of applicationThe TPM-V3 is essential for modern energy concepts:Self-consumption optimisationThe system detects exactly when surplus energy is available in order to store it in the battery or activate devices.Storage systems (SolaX, Growatt SPH/MOD-XH)Essential for battery charge and discharge management based on actual energy demand at the grid connection point.Visualisation & analysisDetailed visualisation of the load profile in the Shine portal to identify high-energy-consuming appliances in the household.Assembly & safety instructionsProfessional connectionInstallation must be carried out by a qualified electrician, as the smart meter is integrated directly into the main line behind the utility meter.Correct phase sequenceStrictly ensure that the phases L1, L2 and L3 on the meter correspond with the connections on the inverter to prevent incorrect measurements or error messages.Communication lineUse a shielded, twisted pair cable (Twisted Pair) for the RS485 connection to avoid signal interference over longer distances. Features Model**Growatt TPM-V3 (Three-Phase)** Connection type3-phase / 4-wire (3P4W) Rated voltage320 V - 480 V (phase-to-phase) Maximum current**100 A** (direct measurement) Frequency50 / 60 Hz InterfaceRS485 (Modbus RTU) Accuracy classClass 1.0 (Active energy) Mounting typeDIN rail (35 mm) Protection classIP51 (indoor use) FAQs about the Growatt TPM-V3 Smart MeterCan the smart meter also be used for systems without a battery?Yes. Even without storage, the smart meter allows you to see your actual self-consumption and export ratio in the portal. Without the Smart Meter, the inverter can only measure generation, not the household consumption.Is the TPM-V3 compatible with all Growatt inverters?With almost all modern 3-phase models. It is natively compatible with the MOD-KTL3-X, SPH-KTL3-UP, MID-KTL3-X series and the new XH series. For single-phase systems, the SPM (Single Phase Meter) is needed.Does the meter display show the same values as the online portal?Yes, but with a higher refresh rate. On the illuminated LCD display, you can read the current values (volts, amps, watts per phase) directly on the unit. The online portal updates the graphical display every 1 to 5 minutes depending on data logger settings.

The 5 metre Betteri BC01 to earthing contact (Schuko) connection cable is the perfect "plug & play" solution for your balcony power station. With its medium length, it offers the ideal compromise to safely bridge the distance between inverter and household socket, without unnecessary cable reserves getting in the way.Equipped with an extremely robust, UV and weather-resistant rubber hose cable (H07RN-F 3G1.5 mm²), this cable conducts the generated solar power into your domestic grid with minimal loss. The splash-proof Betteri connection ensures an absolutely safe, standardised and weatherproof connection directly at the micro inverter.Highlights at a glanceOptimum length (5 metres): Offers the perfect compromise between range and tidiness, ideal for typical balcony or terrace installations without unnecessary cable clutter.Simple plug & play: Ready-made cable for the immediate connection of your mini PV system to a standard household socket.High compatibility: Perfectly fits micro inverters with Betteri BC01 connector (e.g. Hoymiles HM series, Deye, NEP, Envertech, Bosswerk).Robust industrial quality: The heavy rubber hose cable is extremely mechanically resilient, oil-resistant and UV-resistant for sustained outdoor use.Safe protection class (IP65/IP44): The Betteri plug on the inverter is water- and dustproof (IP65 / AK5S-2), while the Schuko plug is splash-proof (IP44).Fields of applicationThe 5-metre version is the all-rounder for most private photovoltaic projects:Balcony power stations: The classic distance to conduct electricity from the inverter at the balcony railing to the external socket on the house wall.Terrace & garden systems: Bridges the distance safely from the installation point in the garden to the covered terrace socket.Garage roofs: Ideal for conducting the electricity from the flat roof through a conduit or opening to the socket inside the garage.Assembly & safety informationStrain relief: Lay the cable so that it is not taut or under mechanical tension. If necessary, fix it with cable ties to the railing to relieve the strain on the Betteri plug at the inverter.Weather protection: While the Betteri plug (IP65) at the inverter is rainproof, the Schuko socket (IP44) should be protected from direct driving rain.Betteri end cap: If your micro inverter has a second, unused Betteri connection for series connections, it must be sealed with a waterproof end cap.Multiple sockets: Always connect the cable directly to a permanently installed wall socket, never use cable drums or multiple socket strips for balcony power stations. Features ModelConnection cable BETTTERI5M Connection A (inverter)**Betteri BC01 coupling** (socket / female, 3-pin) Connection B (domestic grid)**Schuko plug type F** (model AK5S-2, angled or straight) Cable length**5.0 metres** Cable type / specification**H07RN-F 3G1.5 mm²** (heavy rubber hose cable) Cores & cross-section3 cores (L, N, PE) at 1.5 mm² Nominal voltageup to **250 V AC** Max. current carrying capacity**16 A** (Maximum approx. 3680 watts) Protection class**IP65** (dustproof and protection against water jets) CertificationsVDE, CE (cable and plug) FAQs about the Betteri 5m cableIs the cable cross-section of 1.5 mm² sufficient for a balcony power station?Yes, absolutely. For the typical 600W or 800W of a balcony power station (corresponding to approx. 2.6 to 3.5 amps), a cross-section of 1.5 mm² at 5 metres length is absolutely safe and sufficient. Voltage losses at this length are negligible.Is the 5m cable suitable for the Hoymiles HMS series?No. The newer HMS and HMT series from Hoymiles use the proprietary BC05 "Field Connector". This cable with Betteri BC01 plug is primarily intended for the older HM series (e.g. HM-600, HM-800) as well as for inverters from Deye, NEP, Bosswerk or Envertech.Can the cable remain outdoors the whole year round?Yes. Thanks to the heavy H07RN-F rubber hose cable, the cable remains durable against frost, heat, ozone and UV radiation. It does not become brittle in winter and withstands harsh weather conditions for years.

The Deye SUN-50K-SG01HP3-EU-BM4 is a high-performance hybrid inverter for commercial solar systems with high energy requirements. With 50 kW rated power, four MPPT inputs and support for high-voltage batteries, it offers maximum efficiency, flexibility and safety, ideal for large PV projects, industrial applications and off-grid supply systems.Highlights at a glancePowerful: 50 kW rated power and 55 kW maximum output power Four MPPT inputs with 8 strings for optimum energy yield Parallel connection of up to 10 devices possible 100 % unbalanced output usable per phase Two high-voltage battery inputs (up to 800 V) with 2× 50 A charging/discharging currentEfficient energy conversion for large systemsWith a maximum DC input power of 65,000 W, four MPPT trackers and an efficiency of up to 97.6 %, the Deye SUN-50K-SG01HP3-EU-BM4 is ideal for large-scale photovoltaic systems. The MPPT efficiency of 99.9 % ensures optimum power yield even with partial shading or heterogeneous module fields.Flexibility and scalabilityThis inverter can be used in systems with up to 10 devices connected in parallel, making it particularly suitable for large modular projects. Thanks to two battery inputs with high-voltage support (160–800 V) and a charge/discharge current of 50 A each, it can be flexibly combined with powerful storage systems. The six programmable charge/discharge time windows offer intelligent energy management for self-consumption and grid relief.Reliability and protectionWith IP65 protection class and comprehensive safety functions such as reverse polarity protection, residual current monitoring and overvoltage protection (DC Type II / AC Type III), the inverter is ideally equipped for demanding operating conditions. The intelligent cooling system ensures quiet operation (< 65 dB) even at high power.Who is the Deye SUN-50K-SG01HP3-EU-BM4 suitable for?This inverter is ideal for: Commercial enterprises and industrial plants with very high energy consumption Large-scale projects with multiple battery storage systems and module fields Installers who want to realise future-proof high-voltage systems Off-grid installations with diesel generator connection Grid-parallel storage solutions with intelligent load management  ModelDEYE SUN 50K-SG01 HP3-EU-BM4 Battery input data Battery typeLi-lon Battery voltage range (V)160~800 Max. charging current (A)50+50 Max. discharge current (A)50+50 Number of battery inputs2 Charging strategy for Li-Ion batterySelf-adaptation to BMS Input data of PV string Max. DC input power (W)80000 Rated PV input voltage (V)1000 Starting voltage (V)180 MPP voltage range (V)150-850 Rated DC input voltage (V)600 PV input current (A)36 + 36 + 36 + 36 Max. PV short-circuit current (A)55 + 55 + 55 + 55 Number of MPPT4 Strings per MPPT2 + 2 + 2 + 2 AC output data AC rated power and UPS power (W)50000 Max. AC output power (W)55000 AC output rated current (A)75,8 / 72,5 Max. AC output current (A)83,4 / 79,8 Max. continuous AC throughput (A)200 Peak power (without grid)1.5 times rated power, 10 S Generator input/intelligent load/AC coupling current (A)75,8 / 200 / 75,8 Output power factor0,8 leading to 0,8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesAnti-islanding protection, reverse polarity protection at the PV string input, insulation resistance detection, residual current monitoring unit, output overcurrent protection, output short-circuit protection, output overvoltage protection Overvoltage categoryDC Type II/AC Type III Certifications and standards Grid approvalsVDE4105 IEC61727/62116 VDE0126 AS4777.2 CEI 0 21 EN50549-1 G98 G99 C10-11 UNE217002 NBR16149/NBR16150 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<65 dB Communication with BMSRS485; CAN Weight (kg)80 Size (mm)527B×894H×294T（Without connectors and brackets） Degree of protectionIP65 Installation styleWall bracket Warranty10 years  FAQs about the Deye Sun 50K Hybrid inverterDo I need external NA protection from 50 kW?No. The inverter has an integrated anti-islanding circuit and fulfils all relevant standards such as VDE-AR-N 4105, EN 50549 and G99. Additional NA protection is therefore not required.Which high-voltage storage systems are approved?Officially compatible models include BYD HVS/HVM, Pylontech Force H1/H2, Dyness Tower and the Deye GB-L series. Communication takes place via CAN or RS485, depending on the model. The appropriate setup number is entered directly in the menu “Battery → Lithium → Setup Number” or set via DIP switches. According to the provider, other storage solutions such as BOS-G are already preconfigured.How many kWp can I connect without clipping?According to the data sheet, the maximum DC input power is 65 000 W. The manufacturer even provides for up to 100 000 W PV access power, which results in a DC/AC ratio of 1.3. In practice, a generator size of 60 to 65 kWp is considered optimal. Only above this limit can low clip losses occur on a few high-load days, which remain below two per cent over the course of the year.Can I connect several 50-kW devices in parallel?Yes. Up to ten inverters can be operated in parallel, both grid-connected and off-grid. One device assumes the master function including CT sensor connection, the other units follow automatically in the network.Do I need special ventilation?Active climate technology is not required. The inverter works with intelligent air cooling and is designed for ambient temperatures up to 60 °C. The maximum noise level is 65 dB(A) under full load, in standby mode the device remains virtually silent. Good air circulation is important, for example in a ventilated technical room or in a protected outdoor location. The fan inlets and outlets must remain unobstructed, otherwise charging problems may occur.  Scope of delivery: Deye SUN-50K-SG01HP3-EU-BM4 (50 kW HV hybrid inverter) 1 x Deye SUN-50K-SG01HP3-EU-BM4 inverterAn extremely powerful three-phase high-voltage hybrid inverter with 50 kW power, integrated LCD touchscreen and four MPPT trackers for large commercial photovoltaic systems.1 x Wall Mount BracketA reinforced metal mounting rail for securely fastening the heavy industrial device to a load-bearing wall or mounting frame.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x current transformer (CT - Current Transformer)External split core current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation at high load currents.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the numerous PV strings to the MPPT inputs of the inverter.1 x set of battery connection plugs (high-voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the massive wall bracket.1 x operating manual (User Manual)A printed manual with detailed installation instructions, wiring diagrams and safety instructions.

The Deye BOS-G 60 PRO high-voltage storage set is a reliable and powerful storage solution for commercial applications and demanding private households. With a total capacity of 61.44 kWh, modular expandability and intelligent battery management, it fulfils the highest requirements for safety, efficiency and flexibility.Highlights at a glanceHigh capacity: 61.44 kWh gross storage capacity for large energy systemsUsable energy: 55.30 kWh at 90 per cent depth of dischargeFlexible scalability: Up to 16 battery racks can be operated in parallelIntelligent control: Integrated BMS protects against overcharging, deep discharge and overheatingEasy to use: Quick installation in 19-inch rack formatEfficient energy storage for modern projectsThe BOS-G 60 PRO offers an excellent foundation for integration into existing energy systems with its high voltage of 614.4 volts and a wide operating voltage range of 528 to 700.8 volts. The lithium iron phosphate technology used ensures high safety, low self-discharge and a long service life.Modular and customisableThe system architecture allows flexible expansion to up to 16 parallel battery racks and AC parallel operation of up to 10 Deye inverters. This means that the system can be precisely adapted to increasing requirements and remains expandable in the long term.Safe energy managementThe integrated BMS continuously monitors cell voltages, temperatures and charge levels. It actively protects against critical operating states and optimises the service life of the battery units through automatic cell balancing.Who is the Deye BOS-G 60 PRO suitable for?The high-voltage storage set is ideal for:Commercial enterprises with high energy consumption or emergency power requirementsLarge photovoltaic systems focusing on optimising self-consumptionPrivate households with above-average energy requirementsProject developers who require a modular, certified high-voltage system  ModelDEYBOS-G-PRO Battery typeLiFePO4 Module capacity (kWh)5.12 Module nominal voltage (V)51.2 Module capacity (Ah)100 Max. battery module number in series (optional)5-16 System nominal voltage (V)256-819.2 System operating voltage (V)220~934.4 System capacity (kWh)25.6-81.92 System usable capacity (kWh)23.04-73.73 Charging/discharging current (A) - Recommendation50 Charging/discharging current (A) - Nominal value100 Charging/discharging current (A) - Peak discharge (2 min,25°C)125 Operating temperature (°C)Charge: 0 ~ 55 / Discharge: -20 ~ 55 Display system indicator Yellow : Battery High VoltagePower On Red : Battery System Alarm Communication connectionCAN2.0, RS485 Humidity5% ~ 85%RH Altitude≤3000m IP protection class of the housingIP20 Storage temperature (°C)0 ~ 35 Dimensions (W/D/H, mm)530 * 602 * 2219 Weight (kg)290-837 Installation locationFloor mounting Recommended depth of discharge90% Cycle lifetime25 ± 2°C, 0.5C/0.5C, EOL70% ≥ 6000 Warranty10 years CertificationsUN38.3 / CE / CE-EMC / IEC62040 / CEC / VDE  FAQs about the Deye BOS-G 60 PRO high-voltage storage setWhat storage capacity does the BOS‑G 60 PRO provide and how much of it is usable?The set consists of 12 LiFePO₄ modules, each with a gross capacity of 5.12 kWh, giving a total storage capacity of 61.44 kWh. Thanks to the recommended 90% depth of discharge (DoD), around 55.3 kWh of usable net energy is available, ideal for large private households or commercial applications.What protection and management functions does the BMS perform?The integrated battery management system (BMS) continuously monitors and protects against overvoltage, undervoltage, overcurrent, short circuit and temperature deviations. It also actively balances all cells and ensures optimal charging and discharging conditions.Which electrical parameters (voltage & current) are relevant?Operating voltage: between 528 V and 700.8 V, nominal voltage at 614.4 V DCMaximum continuous current: 100 AShort-term peak current: 125 A (approx. 2 minutes)Is the system modularly expandable?Yes, the modular concept makes it possible to operate several BOS‑G 60 PRO storage units in parallel. Up to 16 tanks (racks) in series and up to 10 inverters in the AC network are possible to scale capacity and redundancy as required.In which temperature range can the storage system be operated?Discharge: from −20 °C to +55 °CCharge: from 0 °C to +55 °C This makes the system suitable for a wide range of climate zones, from cold garages to warm attics. Scope of delivery Deye BOS-G60 PRO high-voltage storage set (61.44 kWh) with rack system: System compositionThis product is a set and consists of a rack cabinet and the 13 individual slide-in modules (1x BMS and 12x batteries).Component 1: Deye rack system / battery cabinetA cabinet to hold the BMS unit and the battery modules, often with rollers and feet.Component 2: Deye control box / BMS slide-in moduleThe central control unit (BMS/BCCB), which is inserted into the rack cabinet as a module.Component 3 to 14: Twelve Deye BOS-G-PRO-Pack5.1 high-voltage battery slide-in modules (each 5.12 kWh)Twelve pure high-voltage battery modules, which are also inserted into the rack cabinet.1 x set of battery connection cables (plus & minus)A pair of special high-voltage power cables to connect the BMS module to a compatible high-voltage hybrid inverter.1 x communication cable (CAN/RS485)A long data cable for communication between the BMS module and the inverter.12 x connection bridge / series connection cableShort, robust cables or fixed bridges to connect the thirteen slide-in modules (BMS + 12 batteries) in the rack with each other.1 x earthing cableA protective conductor cable to earth the rack system in accordance with regulations.1 x mounting accessories (rack mounting)Includes screws and rails for fixing the modules inside the rack as well as material for anchoring the cabinet to the floor.1 x operating and installation manualA printed manual describing the assembly of the complete rack system.

The JA Solar JAM54D40 455/LB bifacial solar module is part of the Deep Blue 4.0 Pro series and has been developed for maximum energy yield, long service life and high efficiency. With the latest n-type technology, bifacial design and double-sided glass structure, the module is ideal for demanding private and commercial photovoltaic systems.Highlights at a glancePowerful: 455 W rated power with up to 22.6% module efficiencyBifacial energy yield: Rear side efficiency up to 80% (±5%)High reliability: Over 6,000 charge cycles at 70% EOL powerLow degradation: Only 0.4% power loss per year over 30 yearsRobust design: Double glass module with 1.6 mm glass thickness front and rearDurable: 25 years product warranty, 30 years performance guaranteeState-of-the-art n-type cell technologyThe module is based on n-type Bycium++ cell technology with 16 busbars (MBB half-cell). This reduces the power loss caused by light-induced degradation (LID) and ensures better performance in low light conditions as well as a higher overall energy yield.High performance under real conditionsThe JAM54D40 455/LB delivers strong performance not only under standard test conditions, but also at high ambient temperatures, low irradiation and when used bifacially. The bifacial rear-side absorption can achieve an additional yield of up to 30% with optimum installation.Robust construction for high loadsThe module is designed for a maximum static front load of 5400 Pa and a back load of 2400 Pa. The junction box is IP68 rated, ensuring a safe operation under a wide range of weather conditions. Suitable for applications from -40 °C to +85 °C.   Electrical parameters at STC Maximum rated power (Pmax) (W)455 Open-circuit voltage (Voc) (V)39.50 Maximum power voltage (Vmp) (V)33.00 Short-circuit current (Isc) (A)14.56 Maximum power current (Imp) (A)13.79 Module efficiency (%)22.8 Operating conditions Maximum system voltage1500V DC Operating temperature–40°C ... +85°C Maximum rated power of series fuse30A General data Dimensions (W / H / D)1762/1134/30mm Weight22 kg   Who is the JA Solar JAM54D40 455/LB suitable for?Installers and system planners focusing on performance and durabilityOperators of rooftop systems wanting to benefit from additional bifacial yieldCustomers looking for a visually appealing full black solution with high energy yieldProjects with demands for low degradation and high environmental resilienceFrequently asked questions (FAQ) about the JA Solar JAM54D40 455/LBWhat does "bifacial" mean for this module?The module uses bifacial cells that are light-sensitive on both the front and rear sides. This means that reflected light from the rear side can also be converted into electricity, which can increase energy yield by up to 30 percent depending on the installation environment.What is the difference between n-type and p-type cells?n-type cells, as in the JAM54D40 455/LB, have higher efficiency, lower light-induced degradation (LID) and better low-light performance compared to conventional p-type cells.How large is the module and how much does it weigh?The module measures 1134 × 1762 × 30 mm and weighs 22 kg. It features a double glass design with 1.6 mm glass thickness on the front and rear sides.How long is the warranty?JA Solar offers 25 years product warranty and 30 years linear performance guarantee with a maximum annual degradation of only 0.4 percent.Is the module suitable for use in extreme climate zones?Yes, the module is designed for operating temperatures from -40 °C to +85 °C and can withstand a front load of up to 5400 Pa and a back load of up to 2400 Pa. The junction box is rated to IP68.Which inverters is the module compatible with?The module is compatible with all standard inverters designed for a system voltage of up to 1500V DC. The junction boxes are equipped with MC4-EVO2 connectors.What is the best way to install the module?The module is suitable for both rooftop and ground-mounted systems. It can be installed in landscape or portrait format. The cable length is adapted to the orientation in each case.How robust is the module against environmental influences?Thanks to its glass-glass design and black aluminium frame, the module withstands extreme loads, designed for snow loads up to 5,400 Pa and wind loads up to 2,400 Pa. The rear foil and robust frame construction provide reliable protection against moisture and environmental influences.