Growatt TPM-V3 Smart Meter – Precise 3-phase energy monitoring

The 5 metre Betteri BC01 to earthing contact (Schuko) connection cable is the perfect "plug & play" solution for your balcony power station. With its medium length, it offers the ideal compromise to safely bridge the distance between inverter and household socket, without unnecessary cable reserves getting in the way.Equipped with an extremely robust, UV and weather-resistant rubber hose cable (H07RN-F 3G1.5 mm²), this cable conducts the generated solar power into your domestic grid with minimal loss. The splash-proof Betteri connection ensures an absolutely safe, standardised and weatherproof connection directly at the micro inverter.Highlights at a glanceOptimum length (5 metres): Offers the perfect compromise between range and tidiness, ideal for typical balcony or terrace installations without unnecessary cable clutter.Simple plug & play: Ready-made cable for the immediate connection of your mini PV system to a standard household socket.High compatibility: Perfectly fits micro inverters with Betteri BC01 connector (e.g. Hoymiles HM series, Deye, NEP, Envertech, Bosswerk).Robust industrial quality: The heavy rubber hose cable is extremely mechanically resilient, oil-resistant and UV-resistant for sustained outdoor use.Safe protection class (IP65/IP44): The Betteri plug on the inverter is water- and dustproof (IP65 / AK5S-2), while the Schuko plug is splash-proof (IP44).Fields of applicationThe 5-metre version is the all-rounder for most private photovoltaic projects:Balcony power stations: The classic distance to conduct electricity from the inverter at the balcony railing to the external socket on the house wall.Terrace & garden systems: Bridges the distance safely from the installation point in the garden to the covered terrace socket.Garage roofs: Ideal for conducting the electricity from the flat roof through a conduit or opening to the socket inside the garage.Assembly & safety informationStrain relief: Lay the cable so that it is not taut or under mechanical tension. If necessary, fix it with cable ties to the railing to relieve the strain on the Betteri plug at the inverter.Weather protection: While the Betteri plug (IP65) at the inverter is rainproof, the Schuko socket (IP44) should be protected from direct driving rain.Betteri end cap: If your micro inverter has a second, unused Betteri connection for series connections, it must be sealed with a waterproof end cap.Multiple sockets: Always connect the cable directly to a permanently installed wall socket, never use cable drums or multiple socket strips for balcony power stations. Features ModelConnection cable BETTTERI5M Connection A (inverter)**Betteri BC01 coupling** (socket / female, 3-pin) Connection B (domestic grid)**Schuko plug type F** (model AK5S-2, angled or straight) Cable length**5.0 metres** Cable type / specification**H07RN-F 3G1.5 mm²** (heavy rubber hose cable) Cores & cross-section3 cores (L, N, PE) at 1.5 mm² Nominal voltageup to **250 V AC** Max. current carrying capacity**16 A** (Maximum approx. 3680 watts) Protection class**IP65** (dustproof and protection against water jets) CertificationsVDE, CE (cable and plug) FAQs about the Betteri 5m cableIs the cable cross-section of 1.5 mm² sufficient for a balcony power station?Yes, absolutely. For the typical 600W or 800W of a balcony power station (corresponding to approx. 2.6 to 3.5 amps), a cross-section of 1.5 mm² at 5 metres length is absolutely safe and sufficient. Voltage losses at this length are negligible.Is the 5m cable suitable for the Hoymiles HMS series?No. The newer HMS and HMT series from Hoymiles use the proprietary BC05 "Field Connector". This cable with Betteri BC01 plug is primarily intended for the older HM series (e.g. HM-600, HM-800) as well as for inverters from Deye, NEP, Bosswerk or Envertech.Can the cable remain outdoors the whole year round?Yes. Thanks to the heavy H07RN-F rubber hose cable, the cable remains durable against frost, heat, ozone and UV radiation. It does not become brittle in winter and withstands harsh weather conditions for years.

The solar cable SOLS6100 (100 metres, 6mm²) in black is the professional solution for photovoltaic installations where maximum efficiency and minimal resistance are paramount. With a length of 100 metres on a reel and a reinforced cross-section of 6mm², this cable is excellent for large roof systems, open-area projects or systems with high currents. The black identification enables standard-compliant identification of the negative pole (-) and ensures clearly arranged cabling.Certified in accordance with the international standard IEC 62930, this cable offers maximum safety for modern PV systems with voltages of up to 1500V DC. The larger cross-section minimises voltage losses even over long distances and is ideal for high-performance module generations delivering high currents.Highlights at a glanceMaximum efficiency: The 6mm² cross-section significantly reduces the electrical resistance and provides more yield compared to standard cables.Certified safety: Complies with IEC 62930 (H1Z2Z2-K) standard for use in photovoltaic systems up to 1500V DC.Long range: 100 metres in one piece enable custom cuts for tailor-made string connections without unnecessary separation points.Extremely resistant: The high-quality XLPO double insulation is UV-resistant, ozone-resistant and flame-retardant for a lifespan of more than 25 years.Corrosion-protected conductor: Fine-stranded, tinned copper offers permanently optimum conductivity and protects against oxidation in a damp environment.Wide temperature range: Safe operation in extreme weather conditions from -40°C to +90°C (short-term peaks up to +120°C).Areas of applicationThe SOLS6100 is the number one choice for demanding PV projects:Large roof systems & PV parksEfficient string cabling and connection of distant module fields to the central inverter.High-performance balcony power plantsIdeal for systems with modern modules (500Wp+), to ensure the loss-free transport of high currents.Battery storage & stand-alone systemsPerfect for 24V or 48V systems where low voltage drops are crucial for charging efficiency.Assembly & safety instructionsProfessional connectionsFor this cross-section, use only MC4 connectors that are explicitly approved for 6mm² cable, and use high-quality crimping pliers.Mechanical protectionWhen laying on the roof or through walls, use corrugated ducts or cable ducts to protect the insulation from mechanical abrasion and rodent bites.Parallel cable routingRoute the black negative cable as parallel and close as possible to the red positive cable to minimise electromagnetic interference fields (induction loops). Features Model / SKU**SOLS6100** Conductor cross-section**6.0 mm²** Delivery form**100 metre reel** ColourBlack (negative pole) Rated voltageDC: 1.5 kV / Max. 1.8 kV Conductor materialCopper, tinned (Class 5) Temperature range-40°C to +120°C (on the conductor) Standardisation**IEC 62930 / EN 50618** Special featureHalogen-free, UV- & ozone-resistant  FAQs about solar cable black 100m 6mm²Why should I choose 6mm² instead of 4mm²?For more yield and future-proofing.Especially for cable lengths above 15–20 metres or when using modules with high current (Isc above 13A), voltage drop is noticeably lower with 6mm². This means more energy reaches the inverter and the cable stays cooler under high load.Can the cable be laid directly in the ground?Only in protective conduit.Although the insulation is very robust, the cable is not designed for direct burial without protection. Installation in a suitable cable conduit in the ground, however, is no problem.Is the cable resistant to chemicals?Yes.The XLPO insulation is resistant to acids, alkalis and ammonia. This makes it particularly suitable for agricultural (stables) or industrially impacted areas.