Deye SE-F5 Pro-C – Advanced LiFePO4 storage – 51.2V / 5.12 kWh

The Deye SUN-6K-SG05LP1-EU is a state-of-the-art and powerful single-phase hybrid inverter that functions as an intelligent hub for larger photovoltaic systems. It has been developed to offer you maximum independence, efficiency, and security of supply. With a high output power of 6 kW, it manages the energy flows between your solar panels, the battery storage and the public power grid. Thanks to its integrated emergency power function, you are reliably supplied with high performance even in the event of a power failure.Highlights at a glanceIntelligent hybrid system: Manages PV generation, battery storage and mains consumption for maximum self-consumption.High performance: With 6 kW output, ideal for larger households, heat pumps or small businesses.Integrated emergency power supply: Provides uninterrupted power supply (UPS level) during mains failure.Two MPP trackers: Enables connection of two independent module fields, ideal for east-west roofs or partial shading.Flexible battery connection: Compatible with a wide range of 48V low-voltage batteries.Comprehensive monitoring: Integrated Wi-Fi module for simple and intuitive system monitoring via app.Smart energy management for your homeThe Deye hybrid inverter is more than just a converter from DC to AC. It is the brain of your energy supply. During the day, it supplies your loads directly with solar power, while surplus energy is stored in your battery for use at night or on cloudy days. Only when the storage is full and no load needs electricity is the energy fed into the public grid. This way, you maximise your self-consumption and significantly reduce your electricity costs.Maximum yields through flexible PV connectionThanks to the two integrated MPP trackers (Maximum Power Point), the Deye SUN-6K offers maximum flexibility in planning your PV system. You can connect two separate module strings with different orientations (e.g. east and west sides of the roof) or with different module types. Each tracker optimises the output of its string individually, so you always achieve the maximum possible energy yield, even in complex roof situations or partial shading.Independence through integrated emergency power supplyA special feature of this inverter is the integrated emergency power function. In the event of a failure of the public power grid, the device switches to a separate emergency power output in less than 10 milliseconds and continues to supply selected critical loads such as lighting, refrigerator or IT infrastructure with power from the battery storage. This UPS-level (Uninterruptible Power Supply) switching time ensures maximum supply reliability. Features  ModelDeye SUN-6K-SG05LP1-EU Battery input data Battery typeLead-acid or Li-ion Battery voltage range (V)40~60 Max. charging current (A)140 Max. discharging current (A)140 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)9600 Nominal PV input voltage (V)370 Starting voltage (V)80 MPP voltage range (V)125-425 Max. DC input voltage (V)550 PV input current (A)13+22 Max. PV short-circuit current (A)17+28.6 Number of MPPT2 Strings per MPPT1+2 AC output data AC nominal power and UPS power (W)6000 Max. AC output power (W)6600 AC output nominal current (A)27.3 Maximum AC output nominal current (A)30 Max. continuous AC throughput (A)40 Peak power (without grid)2 times nominal power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Total harmonic distortion (THD)< 3% ( nominal power ) Direct current feed<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97,00% MPPT efficiency>99% Protection FusesIntegrated lightning protection, anti-islanding, reverse polarity protection, short circuit protection, overload protection, and much more. Surge categoryDC Type II/AC Type II Certifications and standards Grid approvalsVDE4105, IEC61727/62116, VDE0126, EN50549-1, CEI 0-21, AS4777, NRS2017, G98, G99, etc. Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range ( ℃ )-45~60°C, >45° C power derating CoolingIntelligent cooling Noise (dB)<30 dB Communication with BMSRS485; CAN Weight (kg)15 Size (mm)330B×580H×232T Degree of protectionIP65 Installation styleWall mount Warranty10 years  FAQs about the Deye SUN-6K-SG05LP1-EU hybrid inverterWhat exactly does "hybrid inverter" mean?A hybrid inverter can manage energy from several sources at the same time. It acts as the interface between the solar panels, the battery storage and the public power grid. It intelligently decides whether the solar power generated is used directly, stored in the battery or fed into the grid.Who is a 6 kW inverter suitable for?A 6 kW inverter is ideal for larger detached houses with higher electricity consumption, for example due to use of a heat pump or an electric vehicle. It is also suitable for small businesses or agricultural operations that want to optimise their own consumption.Which batteries are compatible with this inverter?The Deye SUN-6K is designed for use with 48V low-voltage (LV) lithium-ion battery storage systems. It is compatible with many leading manufacturers. The full compatibility list can be found on the manufacturer's website.Do I need any additional devices for the emergency power function?The inverter has an integrated emergency power output (EPS port). For use, the emergency loads to be supplied must be placed on a separate circuit by a qualified electrician and connected to this output. An additional external transfer switch is generally not required. Scope of delivery: Deye SUN-6K-SG05LP1-EU (6 kW Single-Phase Hybrid Inverter) 1 x Deye SUN-6K-SG05LP1-EU inverterA high-performance single-phase hybrid inverter with 6 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA robust metal mounting rail for secure installation of the device on a load-bearing wall.1 x Wi-Fi Stick (Data Logger)A plug-in communication module for connecting to the Internet for remote monitoring via Deye Cloud or Solarman App.1 x Current Transformer (CT)An external split current transformer for measuring energy flows at the property connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The necessary pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x Communication Cable (BMS)A pre-assembled RJ45 data cable for connection between the inverter and the battery management system.1 x Installation Kit (Screws and Plugs)A set of stainless steel screws and heavy-duty wall plugs for professional installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, wiring diagrams and important safety information.

The Deye SUN-8K-SG05LP3-EU-SM2 is a powerful three-phase hybrid inverter. It has been specially designed for residential and commercial applications, combining inverter, battery charger and intelligent energy management system in a single device. This all-in-one solution is ideal for new installations as well as for retrofitting existing photovoltaic systems and reliably maximises self-consumption and energy efficiency.Highlights at a glanceSupports both lead-acid and lithium-ion batteries for flexible storage solutionsBattery voltage range of 40 to 60 volts for different storage requirementsMaximum charge and discharge current of 190 amperes enables fast energy transferMaximum PV input power of 12,000 watts for larger solar installationsUnbalanced output power with up to 50 percent of the rated power per phase enables flexible load distributionParallel connection of up to 10 devices for customisable system sizesEfficient energy conversion for modern requirementsThe Deye SUN-8K-SG05LP3-EU-SM2 offers a maximum efficiency of 97.6 percent and an MPPT efficiency of over 99 percent. The wide MPPT voltage range of 200 to 650 volts ensures that high energy yield is achieved even under changing irradiation conditions. With a maximum PV input voltage of 800 volts, the inverter is optimally suited for high-performance solar module arrays. This helps to sustainably increase the profitability and economic efficiency of the photovoltaic system.Flexibility and scalabilityThe Deye SUN-8K-SG05LP3-EU-SM2 is adaptable to different requirements. With the possibility of operating up to ten devices in parallel, the system can be scaled for both smaller and larger energy projects. AC coupling enables easy integration into existing solar systems without the need for extensive modifications. Thanks to support for both types of batteries, lead-acid and lithium-ion, the inverter offers high adaptability to individual storage solutions.Reliability and protectionWith an IP65 protection class, the inverter is optimally protected against dust and water, making it suitable for use in a wide range of environments. The operating temperature range from minus 40 to plus 60 degrees Celsius ensures reliable operation even under extreme weather conditions. Extensive protection features such as overcurrent, overvoltage, short-circuit and thermal protection, DC reverse polarity protection and DC insulation impedance monitoring ensure a high level of operational safety and a long service life for the device.Who is the Deye SUN-8K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forHomeowners looking for a powerful and flexible solution for self-consumption and grid independenceCommercial users seeking a stable and efficient power supplyUsers who wish to retrofit modern storage solutions to existing solar installationsInstallations in regions with fluctuating grid supply, where diesel generators provide additional supply security  ModelDEYE SUN 8K-SG05LP3-EU-SM2 Battery input data Battery typeLi-lon Battery voltage range (V)40~60 Max. charge current (A)190 Max. discharge current (A)190 Number of battery inputs1 Charging strategy for Li-Ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)12000 Nominal PV input voltage (V)550 Start voltage (V)160 MPP voltage range (V)200-650 Max. DC input voltage (V)800 PV input current (A)20+20 Max. PV short-circuit current (A)30+30 Number of MPPT2 Strings per MPPT1+1 AC output data AC rated power and UPS power (W)8000 Max. AC output power (W)8800 AC output rated current (A)12.2/11.6 Maximum AC output rated current (A)13.4/12.8 Max. continuous AC passthrough (A)45 Peak power (without grid)2x rated power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) DC feed-in<0.5% ln Efficiency Max. efficiency97.60% Euro efficiency97.00% MPPT efficiency99.90% Protection FusesDC polarity reverse connection protection, AC output overcurrent protection, thermal protection, AC outputovervoltage protection, AC output short-circuit protection, DC component monitoring, overvoltage load protection,earth fault current monitoring, arc fault current interrupter (optional), grid monitoring,islanding protection monitoring, earth fault detection, DC input switch, DC isolationimpedance monitoring, residual current detection (RCD), surge protection level Surge protection categoryDC Type II/AC Type III Certifications and standards Grid approvalsIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE directive R25, G98, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45°C power reduction CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN; RS232 Weight (kg)35.2 Size (mm)422B×699.3H×279T Degree of protectionIP65 Installation styleWall mounting Warranty10 years  FAQs about the 8 kW Deye Sun Hybrid InverterWhich battery types does the inverter support?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range from 40 to 60 volts.What is the maximum charge and discharge current?The maximum charge and discharge current is 190 amperes, enabling rapid energy transfer.What protection functions are integrated in the Deye?The inverter offers protection mechanisms such as DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, optional arc fault protection switch, islanding protection, DC switch, insulation impedance detection, earth fault detection, and class II overvoltage protection for DC and AC.Is the inverter suitable for retrofitting existing systems?Yes, the inverter can be easily integrated into existing solar systems thanks to AC coupling.Can the inverter supply unbalanced loads?Yes, the inverter can supply an unbalanced load of up to 100 percent, with each phase supplying up to 50 percent of the rated output. Scope of delivery: Deye SUN-8K-SG05LP3-EU-SM2 (8 kW LV Hybrid Inverter) 1 x Deye SUN-8K-SG05LP3-EU-SM2 inverterA three-phase hybrid inverter with 8 kW output, integrated LCD colour touch screen and support for 48V low voltage battery systems.1 x wall bracket (Wall Mount Bracket)A robust metal mounting rail for securely attaching the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the Internet for remote monitoring via Deye Cloud or Solarman App.3 x current transformer (CT - Current Transformer)External clamp-on current transformers for measuring energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The pairs of DC connectors required (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter and the battery management system.1 x mounting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for professional installation of the wall bracket.1 x user manual (User Manual)A printed manual with detailed installation instructions, wiring diagrams and safety information.

The Eastron SDM630-M is a modern and multifunctional digital energy meter for three-phase networks, designed for comprehensive monitoring and analysis of electrical parameters. Thanks to its integrated Modbus RTU interface, it can be seamlessly integrated into building automation, energy management or photovoltaic monitoring systems. As a direct-measuring meter up to 100 amps per phase, it offers precise data acquisition for a wide range of applications in commercial, industrial and demanding private households.Highlights at a glancePrecise measurement: Reliably measures a wide range of electrical quantities (kWh, kvarh, kW, kvar, kVA, P, F, PF, Hz, dmd, V, A, THD).Modbus RTU interface: Enables simple remote reading and integration into higher-level systems via RS485.Multifunctional: Suitable for energy monitoring, cost centre billing, load management and PV system monitoring.Direct measuring up to 100A: No external current transformers required for currents up to 100A per phase, simplifies installation.Compact DIN rail format: Simple and space-saving installation in standard electrical distribution boards (4 modules wide).Comprehensive energy monitoring for professional applicationsThe Eastron SDM630-M is the ideal instrument for detailed recording of energy consumption and generation. It enables the precise monitoring of total consumption, individual machines or circuits as well as the recording of energy generated by a photovoltaic system. Thanks to the measurement of active and reactive energy in both directions (import/export), it is perfectly suited for monitoring PV systems with self-consumption. Its data forms the basis for energy efficiency measures, internal cost allocations or the monitoring of load profiles.Precise measurement and flexible integrationIn addition to active energy (kWh), this energy meter also measures reactive energy (kvarh), active power (kW), reactive power (kvar), apparent power (kVA), current (A), voltage (V), frequency (Hz), power factor (PF) and total harmonic distortion (THD) for voltage and current. The integrated Modbus RTU interface via RS485 enables all these values to be queried by systems such as data loggers, PLC controllers or energy management software. Direct measurement up to 100A eliminates the need for complex installation and configuration of external current transformers in many standard applications.Simple installation and operationThe SDM630-M is quick and easy to install on a standard DIN rail in electrical distribution boards. The large, illuminated LCD display enables the most important measured values to be read directly on site. The buttons on the front can be used to navigate intuitively through the various display menus in order to view all the recorded parameters or make basic settings. Features  ModelEastron SDM630-M Modbus ApplicationThree-phase energy meter MeasurementActive/reactive energy (kWh/kvarh),Voltage (V), current (A), power (W/VA/var),Power factor, frequency (Hz) Power supply types3-phase (3p4w, 3p3w), 1-phase (1p2w) Rated voltage (V)3x230/400 V AC Rated current (A)10(100) A (direct measurement) Accuracy classCl. 1 (active energy) / Cl. B (MID) InterfaceModbus RTU (RS485) MountingDIN rail (DIN rail) Dimensions (W x H x D in mm)72 x 100 x 66 (4 modules) Weight (g)approx. 300  FAQs about the Eastron SDM630-M energy meterWhat is the difference between the SDM630-M and other SDM630 variants?The "M" in the designation stands for the integrated Modbus RTU interface. There are also variants with pulse outputs (e.g. SDM630-V1/-V2), with M-Bus interface or as MID-calibrated versions for billing purposes (SDM630-Modbus-MID).Do I need external current transformers for this meter?No, this model is designed for Direct measurement of currents up to 100 amperes per phase. No external current transformers (CTs) are required as long as this current range is not exceeded. Special CT meters (e.g. SDM630MCT) are available for higher currents.Is this meter suitable for official billing (e.g. with the energy supplier)?No, this standard model is usually not MID-calibrated and must therefore not be used for billing to the nearest kilowatt hour. It is primarily intended for monitoring purposes and internal cost allocation. For billing purposes, you need a variant with MID approval (e.g. SDM630-Modbus-MID).How is the data read out via Modbus?To read out the data, you need a Modbus master (e.g. a data logger, a PLC, a Raspberry Pi or a PC with appropriate software and an RS485 interface). The master sends queries to the address of the meter in the RS485 network and reads the values from the defined Modbus registers. The register assignment can be found in the manual for the meter.

The Deye SUN-3.6K-SG05LP1-EU-AM2 is a compact, single-phase hybrid inverter designed specifically for smaller photovoltaic systems in residential buildings. With an AC output power of 3.6 kW it offers the ideal introduction to energy independence by combining solar power generation, battery management and emergency power supply in a single device.As part of the SG05 series this inverter is designed for operation with 48V low-voltage batteries optimised. This makes the system particularly flexible and cost-effective when selecting the storage unit. Despite its compact design, it features all the ‘major’ Deye features, such as the Smart Load connection and parallel scalability.Highlights at a glanceLow-voltage battery connection: Compatible with standard 48V lithium-ion and lead-acid batteries, offering a wide range of cost-effective storage options.Colour touchscreen LCD: Intuitive operation and real-time monitoring of all energy flows directly on the device via the integrated display.2 MPPT trackers: Enables the connection of two independent string arrays, ideal for roofs with different orientations (e.g. east-west).Excellent backup function: Lightning-fast switchover to emergency power in less than 10 ms, ensuring that sensitive equipment continues to run without interruption in the event of a mains failure.AC coupling possible: Existing solar systems can be easily integrated via the inverter to retrofit them with a storage unit.Parallel connection: Up to 16 units can be connected in parallel to flexibly increase system performance as demand rises.Smart load connection: The "Smart Load" port enables the targeted control of loads such as heating elements or pool pumps when there is a surplus of solar energy.Areas of applicationThe SUN-3.6K is the specialist for efficient small-scale systems:Detached houses & flatsPerfect for PV systems up to approx. 4.6 kWp, to drastically increase self-consumption in the household.RetrofittingAdd a 48V battery storage system to an existing installation without having to replace the old inverter.Critical infrastructureProtection for servers, aquariums or heating controls thanks to the reliable UPS function.Installation & Safety InstructionsBattery protectionAs high currents can flow in 48V systems, it is essential to ensure that the cable cross-sections are sufficiently sized and that a suitable DC fuse is installed between the battery and the inverter.Wall mountingThe device is robustly built and designed for wall mounting. Thanks to its IP65 protection rating, it can also be installed in sheltered outdoor areas.Earthing & lightning protectionEnsure that the system is properly earthed to protect the electronics and connected loads from power surges.. Features ModelDeye SUN-3.6K-SG05LP1-EU-AM2 Rated output power3.6 kW (3,600 watts) Phases1-phase (230V) Battery typeLow voltage (LV) 48V Li-Ion / Lead Number of MPP trackers2 MPPT Max. charging/discharging current90 A Max. efficiency97,60 % Protection classIP65** (weatherproof) Special featureIncludes **connection cable set  FAQs for the Deye SUN-3.6K-SG05LP1Which batteries are compatible with this inverter?Almost all 48V lithium storage systems.It is perfectly compatible with popular models such as Pylontech (US2000C/US3000C/US5000), Dyness or Deye’s own low-voltage batteries. Conventional lead-gel batteries can also be configured. It is essential to check the batteries against the compatibility list before purchasing.Can I use the inverter for a balcony power plant?Technically yes, but oversized.While it far exceeds the output of a balcony power plant, it offers the advantage that you can integrate a proper battery and later scale the system into a full roof-mounted installation.Is the Wi-Fi module for app control included?Usually, yes.Deye usually comes with a Wi-Fi dongle, which you can use to connect the system to the "Solarman" app or the Deye portal to view yields and consumption worldwide.Can the unit start a generator?Yes.Via the signal port, the inverter can send an automatic start command to compatible generators if the battery level is too low and there is no sunlight. Scope of delivery: Deye SUN-3.6K-SG05LP1-EU-AM2-P (3.6 kW single-phase hybrid inverter) 1 x Deye SUN-3.6K-SG05LP1-EU-AM2-P inverterA compact single-phase hybrid inverter with 3.6 kW output, an integrated colour LCD touchscreen and support for 48V low-voltage battery systems.1 x wall mount bracketA sturdy metal mounting rail for securely fixing the unit to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the internet for remote monitoring via the Deye Cloud or Solarman app.1 x current transformer (CT)An external folding current transformer for measuring energy flows at the property connection, necessary for net metering and optimising self-consumption.1 x set of battery connection cables (DC cables)A pair of pre-assembled high-performance cables (red and black) for direct electrical connection to a 48V battery (specific to this bundle version).1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (positive and negative) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter to the battery management system.1 x mounting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for the correct installation of the wall mount.1 x User ManualA printed manual containing detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-12K-SG05LP3-EU-SM2 is a three-phase hybrid inverter for residential and commercial energy projects. It combines an inverter, battery charger and energy management system in one device, enabling efficient, flexible energy flow control in new installations and retrofits.Highlights at a glanceSupports both lead-acid and lithium-ion batteries for various storage optionsBattery voltage range from 40 to 60 volts for flexible application possibilitiesMaximum charging and discharging current of 240 amperes for fast energy absorption and releaseMaximum PV input power of 18,000 watts enables high-performance solar systemsTwo independent MPPT inputs for maximum energy yield even with different module orientationsUnbalanced output power with up to 50 percent of the rated power per phase for flexible load distributionEfficient energy conversion for modern requirementsThe Deye SUN-12K-SG05LP3-EU-SM2 achieves a maximum efficiency of 97.6 percent and boasts an MPPT efficiency of over 99 percent. The wide MPPT voltage range of 200 to 650 volts, in conjunction with a maximum PV input voltage of 800 volts, ensures efficient energy capture even under varying irradiation conditions. This high efficiency ensures economical operation and maximum yields from the solar system.Flexibility and scalabilityThe Deye SUN-12K-SG05LP3-EU-SM2 can be flexibly adapted to different requirements. Thanks to the ability to operate up to ten devices in parallel, it is suitable for both smaller systems and large energy projects. The AC coupling allows easy integration into existing systems, making the inverter also ideal for retrofitting. Support for various battery types enables tailor-made storage solutions matched to individual needs and budgets.Reliability and protectionWith an IP65 protection rating, the inverter is optimally protected against dust and water, and is suitable for demanding environmental conditions. The wide operating temperature range from minus 40 to plus 60 degrees Celsius ensures safe operation even under extreme climatic conditions. Comprehensive protection mechanisms such as overcurrent, overvoltage, short-circuit and thermal protection, as well as DC insulation impedance monitoring, provide maximum operational safety and a long system lifespan.Who is the Deye SUN-12K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forHomeowners who want to increase their self-consumption quota and reduce energy costsCommercial enterprises that require a stable and efficient power supplyUsers who want to expand existing solar systems with modern storage solutionsProjects in regions with fluctuating grid stability, where diesel generators are used as an additional energy source  ModelDEYE SUN 12K-SG05LP3-EU-SM2 Battery input data Battery typeLi-lon Battery voltage range (V)40~60 Max. charging current (A)240 Max. discharging current (A)240 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adjustment to BMS PV string input data Max. DC input power (W)18000 Nominal PV input voltage (V)550 Start voltage (V)160 MPP voltage range (V)200-650 Max. DC input voltage (V)800 PV input current (A)26+26 Max. PV short-circuit current (A)39+39 Number of MPPT2 Strings per MPPT2+2 AC output data AC rated power and UPS power (W)12000 Max. AC output power (W)13200 AC rated output current (A)18.2/17.4 Max. rated AC output current (A)20/19.2 Max. continuous AC running (A)45 Peak power (without grid)2 times rated power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) DC feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection SafeguardsDC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, Thermal Protection, AC OutputSurge Protection, AC Output Short Circuit Protection, DC Component Monitoring, Overvoltage Load Protection,Earth Fault Current Monitoring, Arc Fault Circuit Interrupter (optional), Grid Monitoring,Island Protection Monitoring, Earth Fault Detection, DC Input Switch, DC IsolationImpedance Monitoring, Residual Current Detection (RCD), Surge Protection Level Surge categoryDC Type II/AC Type III Certifications and standards Grid approvalsIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G98, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN; RS232 Weight (kg)35,2 Size (mm)386B×660H×250 D Protection classIP65 Installation styleWall bracket Warranty10 years  FAQs on the 10 kW Deye Hybrid InverterWhat types of batteries does the inverter support?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range of 40 to 60 volts.What is the maximum charging and discharging current?The maximum charging and discharging current is 240 amperes, which enables fast energy transfer.Can the inverter be operated with a diesel generator?Yes, the Deye SUN-12K-SG05LP3-EU-SM2 supports the integration of diesel generators for a safe and uninterrupted power supply.Which communication interfaces are available?The inverter offers interfaces such as RS485, RS232, CAN as well as options for GPRS, Wi-Fi, Bluetooth, 4G and LAN for monitoring and control.Can the inverter supply unbalanced loads?Yes, the inverter can supply an unbalanced load of up to 100 percent, with each phase being able to deliver up to 50 percent of the rated power. Scope of delivery: Deye SUN-12K-SG05LP3-EU-SM2 three-phase hybrid inverter 12KW 1 x Deye SUN-12K-SG04LP3-EU-SM2 inverterA three-phase hybrid inverter with 12 kW output, integrated LCD touchscreen and support for 48V low-voltage battery systems.1 x wall mount bracketA robust metal mounting rail for securely attaching the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A pluggable communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman App.3 x current transformers (CT - Current Transformer)External clamp current transformers for measuring energy flows at the house connection, necessary for zero feed-in and optimising self-consumption.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) to connect the PV strings to the inverter.1 x communication cable (BMS)A pre-tethered RJ45 data cable for connecting between the inverter and battery management system.1 x mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for correct installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, circuit diagrams and safety instructions.