FIT

The FIAMM lead-acid battery of the FIT series is a state-of-the-art and absolutely maintenance-free AGM battery with a very high capacity and front terminal connections. It was developed to meet the highest requirements for operational reliability and durability in telecommunications and UPS applications. With a nominal voltage of 12 V and a high capacity of 150 Ah, this accumulator is optimised for fail-safe emergency power supply of large systems in 19- and 23-inch system cabinets. The classification as "Longlife 12+" according to Eurobat confirms its exceptionally long service life of over 12 years.Highlights at a glanceFront terminal design: For simple, fast and safe installation and maintenance in system cabinets.Maximum operational safety: Developed for critical emergency power applications in UPS, telecommunications and data centres.Extremely long service life: Classified as "Longlife 12+" according to Eurobat for a service life of over 12 years.Reliable AGM technology: Absolutely maintenance-free, leak-proof and with internal gas recombination.Very high capacity: 150 Ah for maximum bridging times in the event of a power failure.Fail-safe energy for critical systemsThe FIAMM FIT battery is the specialist for standby parallel operation (standby use), where immediate and reliable energy transfer is crucial in the event of a mains failure. Its front-facing terminals make it the ideal solution for installation in telecommunications racks, uninterruptible power supplies (UPS), data centres and other modular emergency power systems where easy installation and maintenance from the front is required.Advanced lead-fleece technology (AGM)The advanced AGM technology (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fiber mat, offers crucial advantages for standby applications. This makes the battery absolutely leak-proof and it can be installed flexibly in system cabinets. The special design with high-quality lead-tin-calcium grids and the high internal gas recombination rate ensure very low self-discharge and enable long service life in float charge operation.Focus on longevity and economyThe FIAMM FIT series was developed for maximum cost-effectiveness over its entire lifetime. The extremely long service life of over 12 years significantly reduces the need for costly and time-consuming battery replacements in permanently installed systems. The front terminal design also shortens maintenance times, further reducing total cost of ownership (TCO) and guaranteeing reliable emergency power supply for more than a decade. Characteristics  ModelFIAMM FIT lead-acid battery 12FIT150 (150Ah) TechnologyLead-fleece (AGM) Rated voltage (V)12 Capacity (Ah)150 Dimensions (L x W x H in mm)559 x 125 x 316 ConnectionFront connection, M8 internal thread Weight (kg)approx. 56.0  FAQs about the FIAMM FIT lead-acid batteryWhat does the classification "Eurobat Longlife 12+" mean?Eurobat is the association of European battery manufacturers that classifies batteries according to their expected service life in standby operation. "Longlife 12+" means that this battery is designed for a service life of 12 years or more under defined conditions (usually 20°C ambient temperature and correct float charging).What is the advantage of the "front terminal design"?The connection terminals are located on the front of the battery instead of on the top. This makes installation and connection in narrow system cabinets (racks) much easier. In addition, voltage and resistance measurements can be quickly and safely carried out from the front during maintenance without having to remove the batteries from the rack.Which charger or charging voltage is required?As a rule, this battery is installed directly in a UPS system or an emergency power system that automatically regulates the charging. The recommended float charging voltage for continuous operation is typically 13.5V to 13.8V at 20°C. Using an incorrect charging voltage can drastically reduce the service life.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery free of charge to any retailer who sells new batteries or to municipal recycling centres to ensure proper recycling.

The FIAMM lead-acid battery of the FIT series is an ultra-modern and absolutely maintenance-free AGM battery with front terminal connections, developed for the highest demands on operational reliability and longevity in telecommunications and UPS applications. With a nominal voltage of 12 V and a capacity of 40 Ah, this accumulator is optimised for fail-safe emergency power supply in compact 19- and 23-inch system cabinets. The classification as "Longlife 12+" according to Eurobat confirms its exceptionally long service life of more than 12 years.Highlights at a glanceFront terminal design: For simple, quick and safe installation and maintenance in system cabinets.Maximum operational reliability: Developed for critical emergency power applications in UPS, telecommunications and data centres.Extremely long service life: Classified as "Longlife 12+" according to Eurobat for a service life of more than 12 years.Reliable AGM technology: Absolutely maintenance-free, leak-proof and with internal gas recombination.Space-saving design: Optimised dimensions for high energy density in standard racks.Fail-safe energy for critical systemsThe FIAMM FIT battery is the specialist for standby parallel operation (standby use), where immediate and reliable energy takeover in the event of mains failure is crucial. Its front connections make it the ideal solution for installation in telecommunications racks, uninterruptible power supplies (UPS), data centres and other modular emergency power systems where simple installation and maintenance from the front are required.Advanced Absorbent Glass Mat technology (AGM)The advanced AGM technology (Absorbent Glass Mat), in which the electrolyte is completely bound in glass fibre mat, offers crucial advantages for standby applications. This makes the battery absolutely leak-proof and allows flexible installation in system cabinets. The special construction with high-quality lead-tin-calcium grids and the high internal gas recombination rate ensure very low self-discharge and enable a long service life in float charge operation.Focus on longevity and economyThe FIAMM FIT series has been developed for maximum economy throughout its entire service life. The extremely long service life of more than 12 years significantly reduces the need for costly and time-consuming battery replacements in permanently installed systems. The front terminal design also reduces maintenance times, further lowering total cost of ownership (TCO) and guaranteeing reliable emergency power supply for more than a decade. Features  ModelFIAMM FIT lead-acid battery 12FIT040 (40Ah) TechnologyAbsorbent Glass Mat (AGM) Nominal voltage (V)12 Capacity (Ah)40 Dimensions (L x W x H in mm)279 x 106 x 191 ConnectionFront connection, M6 internal thread Weight (kg)approx. 13.5  FAQs about the FIAMM FIT lead-acid batteryWhat does the "Eurobat Longlife 12+" classification mean?Eurobat is the association of European battery manufacturers that classifies batteries according to their expected service life in standby operation. "Longlife 12+" means that this battery is designed for a service life of 12 years or more under defined conditions (usually 20°C ambient temperature and correct float charging).What is the advantage of the "front terminal design"?The terminal poles are mounted on the front of the battery instead of on the top. This makes installation and connection in narrow system cabinets (racks) much easier. In addition, voltage and resistance measurements during maintenance can be carried out quickly and safely from the front without having to remove the batteries from the rack.Which charger or charging voltage is required?As a rule, this battery is installed directly in a UPS system or an emergency power system which automatically regulates the charge. The recommended float charge voltage for continuous operation is typically 13.5V to 13.8V at 20°C. The use of incorrect charging voltage can drastically reduce the service life.How must this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of with household waste. You can return your old battery free of charge to any dealer that sells new batteries or to municipal recycling centres to ensure proper recycling.

The FIAMM lead-acid battery of the FIT series is an ultra-modern and completely maintenance-free AGM battery with front-terminal connections, developed for the highest standards of operational reliability and durability in telecommunications and UPS applications. With a nominal voltage of 12 V and a capacity of 60 Ah, this accumulator is optimised for fail-safe emergency power supply in 19- and 23-inch system cabinets. The classification as "Longlife 12+" according to Eurobat confirms its exceptionally long service life of over 12 years.Highlights at a glanceFront terminal design: For easy, quick and safe installation and maintenance in system cabinets.Maximum operational reliability: Developed for critical emergency power applications in UPS, telecommunications and data centres.Extremely long service life: Classified as "Longlife 12+" according to Eurobat for a service life of over 12 years.Reliable AGM technology: Absolutely maintenance-free, leak-proof and with internal gas recombination.Space-saving design: Optimised dimensions for a high energy density in standard racks.Fail-safe energy for critical systemsThe FIAMM FIT battery is the specialist for standby parallel operation (standby use), where immediate and reliable energy transfer in the event of a power failure is crucial. Its front connections make it the ideal solution for installation in telecommunications racks, uninterruptible power supplies (UPS), data centres and other modular emergency power systems requiring easy installation and maintenance from the front.Advanced absorbed glass mat technology (AGM)The advanced AGM technology (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, offers crucial advantages for standby applications. This makes the battery absolutely leak-proof and allows flexible installation in system cabinets. The special design with high-quality lead-tin-calcium grids and the high internal gas recombination rate ensure very low self-discharge and enable the long service life in float operation.Focus on durability and cost-effectivenessThe FIAMM FIT series has been developed for maximum cost-effectiveness throughout the entire service life. The extremely long service life of over 12 years significantly reduces the need for costly and time-consuming battery changes in permanently installed systems. The front-terminal design also shortens maintenance times, which further reduces the total operating costs (TCO) and guarantees reliable emergency power supply for more than a decade. Features  ModelFIAMM FIT lead-acid battery 12FIT060 (60Ah) TechnologyAbsorbed Glass Mat (AGM) Nominal voltage (V)12 Capacity (Ah)60 Dimensions (L x W x H in mm)279 x 106 x 230 ConnectionFront connection, M6 internal thread Weight (kg)approx. 19.5  FAQs about the FIAMM FIT lead-acid batteryWhat does the classification "Eurobat Longlife 12+" mean?Eurobat is the association of European battery manufacturers that classifies batteries according to their expected service life in standby operation. "Longlife 12+" means that this battery is designed for a service life of 12 years or more under defined conditions (usually 20°C ambient temperature and correct float charging).What is the advantage of the "front terminal design"?The terminal posts are fitted to the front of the battery instead of the top. This greatly facilitates installation and connection in narrow system cabinets (racks). In addition, voltage and resistance measurements can be performed quickly and safely from the front during maintenance without having to remove the batteries from the rack.Which charger / charging voltage is required?As a rule, this battery is installed directly in a UPS system or an emergency power system which automatically controls the charging. The recommended float charging voltage for continuous operation is typically 13.5V to 13.8V at 20°C. The use of an incorrect charging voltage can drastically reduce service life.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally hazardous substances and must not be disposed of in household waste. You can return your old battery to any dealer that sells new batteries or to municipal waste recycling centres free of charge to ensure proper recycling.

The FIAMM lead-acid battery of the FIT series is an ultra-modern and completely maintenance-free AGM battery with front terminal connections, which is designed for the highest demands of operational reliability and longevity in telecommunications and UPS applications. With a nominal voltage of 12 V and a high capacity of 101 Ah, this accumulator is optimised for fail-safe emergency power supply in 19- and 23-inch system cabinets. The classification as "Longlife 12+" according to Eurobat confirms its exceptionally long service life of over 12 years.Highlights at a glanceFront terminal design: For simple, quick and safe installation and maintenance in system cabinets.Maximum operational reliability: Developed for critical emergency power applications in UPS, telecommunications and data centres.Extremely long service life: Classified as "Longlife 12+" according to Eurobat for a service life of over 12 years.Reliable AGM technology: Absolutely maintenance-free, leak-proof and with internal gas recombination.High capacity: 101 Ah for long bridging times in the event of a power failure.Fail-safe energy for critical systemsThe FIAMM FIT battery is the specialist for standby parallel operation (standby use), where immediate and reliable power transfer is essential in the event of a mains failure. Its front connections make it the ideal solution for installation in telecommunications racks, uninterruptible power supplies (UPS), data centres and other modular emergency power systems where easy installation and maintenance from the front are required.Advanced lead-fleece technology (AGM)The advanced AGM technology (Absorbent Glass Mat), in which the electrolyte is completely retained in a glass fibre mat, offers decisive advantages for standby applications. The battery is therefore absolutely leak-proof and can be flexibly installed in system cabinets. The special construction with high-quality lead-tin-calcium grids and the high internal gas recombination rate ensure very low self-discharge and enable the long service life in float charge operation.Focus on longevity and economyThe FIAMM FIT series has been developed for maximum economy over the entire service life. The extremely long service life of more than 12 years significantly reduces the need for costly and time-consuming battery changes in fixed installations. The front-terminal design also shortens maintenance times, further reducing total cost of ownership (TCO) and guaranteeing reliable emergency power for more than a decade. Characteristics  ModelFIAMM FIT lead-acid battery 12FIT101 (101Ah) TechnologyLead-fleece (AGM) Nominal voltage (V)12 Capacity (Ah)101 Dimensions (L x W x H in mm)395 x 110 x 286 ConnectionFront connection, M8 internal thread Weight (kg)approx. 32.5  FAQs about the FIAMM FIT lead-acid batteryWhat does the "Eurobat Longlife 12+" classification mean?Eurobat is the association of European battery manufacturers, which classifies batteries according to their expected useful life in standby operation. "Longlife 12+" means that this battery is designed for a lifetime of 12 years or more under defined conditions (usually 20°C ambient temperature and correct float charging).What is the advantage of the "front terminal design"?The connection terminals are arranged at the front of the battery instead of on the top. This makes installation and connection in narrow system cabinets (racks) considerably easier. In addition, voltage and resistance measurements can be carried out quickly and safely from the front during maintenance without having to remove the batteries from the rack.Which charger or charging voltage is required?As a rule, this battery is installed directly in a UPS system or emergency power system, which automatically controls the charging. The recommended float charging voltage for continuous operation is typically 13.5V to 13.8V at 20°C. Using the wrong charging voltage can drastically shorten the service life.How should this lead-acid battery be disposed of?Lead-acid batteries contain harmful substances for the environment and must not be disposed of via household waste. You can return your old battery free of charge to any retailer who sells new batteries or to municipal recycling centres to ensure proper treatment.

The FIAMM lead-acid battery of the FIT series is an ultra-modern and completely maintenance-free AGM battery with very high capacity and front terminal connections. It has been developed for the highest demands on operational safety and longevity in telecommunications and UPS applications. With a nominal voltage of 12 V and a high capacity of 151 Ah, this accumulator is optimised for the fail-safe emergency power supply of large systems in 19- and 23-inch system cabinets. The classification as "Longlife 12+" according to Eurobat confirms its exceptionally long service life of over 12 years.Highlights at a glanceFront terminal design: For simple, fast and safe installation and maintenance in system cabinets.Maximum operational safety: Developed for critical emergency power applications in UPS, telecommunications and data centres.Extremely long service life: Classified as "Longlife 12+" according to Eurobat for a service life of over 12 years.Reliable AGM technology: Absolutely maintenance-free, leak-proof and with internal gas recombination.Very high capacity: 151 Ah for maximum bridging times in the event of a power failure.Fail-safe energy for critical systemsThe FIAMM FIT battery is the specialist for standby parallel operation (standby use), where immediate and reliable energy takeover is crucial in the event of a mains failure. Its front connections make it the ideal solution for installation in telecommunications racks, uninterruptible power supplies (UPS), data centres and other modular emergency power systems where simple installation and maintenance from the front is required.Advanced Absorbent Glass Mat technology (AGM)The advanced AGM technology (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, offers crucial advantages for standby applications. The battery is therefore absolutely leak-proof and can be flexibly installed in system cabinets. The special construction with high-quality lead-tin-calcium grids and the high internal gas recombination rate ensure very low self-discharge and enable the long service life in float operation.Focus on longevity and economyThe FIAMM FIT series has been developed for maximum cost-effectiveness over the entire service life. The extremely long service life of over 12 years significantly reduces the need for costly and time-consuming battery replacements in permanently installed systems. The front terminal design also shortens maintenance times, further reducing total cost of ownership (TCO) and ensuring reliable emergency power supply for more than a decade. Characteristics  ModelFIAMM FIT lead-acid battery 12FIT151 (151Ah) TechnologyAbsorbent Glass Mat (AGM) Nominal voltage (V)12 Capacity (Ah)151 Dimensions (L x W x H in mm)559 x 125 x 316 ConnectionFront connection, M8 internal thread Weight (kg)approx. 56.0  FAQs about the FIAMM FIT lead-acid batteryWhat does the classification "Eurobat Longlife 12+" mean?Eurobat is the association of European battery manufacturers that classifies batteries according to their expected service life in standby operation. "Longlife 12+" means that this battery is designed for a service life of 12 years or more under defined conditions (usually 20°C ambient temperature and correct float charging).What is the advantage of the "front terminal design"?The connection terminals are located at the front of the battery instead of at the top. This makes installation and connection in narrow system cabinets (racks) considerably easier. In addition, voltage and resistance measurements can be carried out quickly and safely from the front during maintenance, without having to remove the batteries from the rack.Which charger or charging voltage is required?As a rule, this battery is installed directly in a UPS system or an emergency power system, which automatically regulates the charge. The recommended float charge voltage for continuous operation is typically 13.5V to 13.8V at 20°C. Using an incorrect charge voltage can drastically reduce the service life.How should this lead-acid battery be disposed of?Lead-acid batteries contain environmentally harmful substances and must not be disposed of in household waste. You can return your old battery free of charge to any retailer who sells new batteries or to municipal recycling centres to ensure proper recycling.