Tadiran SL-360P Lithium battery AA with 3.6 V and 2.4 Ah, with axial wires

The Tadiran SL-360S from the iXtra Series is a primary lithium thionyl chloride battery in the size AA (Mignon). It has been specially developed for applications that require a long service life in combination with moderate current capacity. With a high nominal voltage of 3.6 V and a very high capacity of 2.4 Ah, it is the ideal energy solution for professional electronics that regularly require moderate current pulses. This model is the standard version for use in battery holders.Highlights at a glanceOptimised for moderate loads: High capacity and stable voltage even with moderate current requirements.Very high capacity: 2.4 Ah for a maximum extended and self-sufficient operating time.High rated voltage: Stable voltage of 3.6 V for almost the entire lifetime.Maximum reliability: Proven long-term stability and low self-discharge.Wide temperature range: Reliable operation from -55 °C to +85 °C.Powerful in a wide range of applicationsThe Tadiran SL-360S was specifically developed for applications where longevity and improved performance output are crucial. Its primary uses include wireless alarm and security systems, GPS tracking modules, professional radios, data loggers, as well as industrial counters and measuring instruments (metering) that regularly transmit data. It is the ideal choice for all devices that operate independently for years and periodically require power for transmission or measurement operations.Designed for maximum safety and efficiencyThe safety and longevity of the SL-360S is based on proven Tadiran design. The cell has a hermetic glass-to-metal seal that reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and ensures a high level of intrinsic safety. Each cell is designed to supply its energy consistently and safely over a very long period, minimising maintenance costs and reducing the total operating costs of your application.iXtra Series: The technology for higher performanceThe iXtra Series from Tadiran is designed to provide improved voltage stability under load. Compared to the standard series (SL-700), which is optimised for minimal continuous currents, the SL-300 series offers better performance with moderate load requirements and pulse currents. The passivation effect is thus overcome more quickly, resulting in a more stable power supply for applications that regularly "wake up" to perform tasks. Characteristics  ModelTadiran SL-360/S TechnologyLithium thionyl chloride (Li-SOCl₂) SizeAA (Mignon) Rated voltage (V)3.6 Capacity (mAh)2400 Max. continuous discharge current130 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 50.5 Weight (g)approx. 18 ConnectionStandard (industrial head) RechargeableNo  FAQs about this Tadiran batteryWhat is the difference between the SL-300 (iXtra) and the SL-700 series?The SL-300 (iXtra) series, which this cell belongs to, is optimised for applications with moderate current requirements (e.g. wireless sensors). It provides more stable voltage under load. The SL-700 series, on the other hand, is designed for absolute long-term use with minimal continuous current, such as in pure memory back-up applications.For which applications is this battery type suitable?This battery type is ideal for professional electronics that require long service life but regularly need power for functions such as sending data. Examples include wireless alarm systems, GPS trackers, data loggers and industrial wireless sensors.Does this model have solder terminals or wires?No, the model SL-360S is the standard version with normal battery contacts and is intended for use in a suitable AA battery holder. For direct installation, Tadiran also offers versions of this cell type with various solder terminals.Is this battery rechargeable?No, this is a primary lithium battery and must not be charged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or bursting of the cell.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface which minimises self-discharge. The iXtra Series is designed so that this layer breaks down more quickly and with less voltage drop under load than with the SL-700 Series, which is advantageous for applications with regular current pulses.

This high-quality Beltrona replacement battery has been specially developed for use in single-battery emergency lights of the Mexcel M72 series. The battery pack consists of four robust NiMH cells in AAA size, which are assembled into a compact cube of 4. With a nominal voltage of 4.8 V and a capacity of 800 mAh, this battery ensures the standard-compliant emergency lighting duration of your safety lighting and offers maximum reliability and longevity.Highlights at a glancePrecisely fitting replacement: Specially designed for the Mexcel emergency light series M72 and compatible models.Reliable NiMH technology: Offers high capacity and cycle stability for demanding emergency lighting operation.Compact cube design: The 2x2 arrangement of the AAA cells enables a space-saving installation in the luminaire.Pre-assembled ready for connection: Equipped with a suitable connection cable and JST plug for quick and error-free replacement.High quality: Use of high-quality industrial cells for a long service life and maximum operational safety.Reliable power for your safety lightingA working battery is the heart of every single-battery emergency light. This Beltrona replacement battery ensures that your safety and escape sign luminaires reliably provide the prescribed energy for the emergency lighting period (e.g. 3 hours) in the event of a power failure. It is the ideal choice for periodic replacement in office buildings, retail outlets, schools and other public institutions to maintain the operational readiness of the emergency lighting system.Robust and proven nickel-metal hydride technologyNickel-metal hydride technology (NiMH) is the modern standard for single-battery emergency lights. Compared to the outdated NiCd technology, it is more environmentally friendly as it does not contain heavy metals such as cadmium, and generally has a higher energy density. The cells used in this pack are optimised for the characteristic continuous trickle charge in emergency lighting systems and offer a long service life.Developed for easy and safe replacementThis replacement battery is designed as a plug-and-play solution for professional installers. The assembly as a compact cube, the precisely fitting cable and the standardised JST plug enable a quick and uncomplicated replacement of the old battery. This minimises maintenance times and ensures that the emergency light is quickly fully operational again. Features  ModelBeltrona replacement battery for Mexcel M72 ApplicationEmergency light battery TechnologyNickel-metal hydride (NiMH) Nominal voltage (V)4.8 Capacity (mAh)800 Cell arrangementBar (4 cells in series) Dimensions (L x W x H in mm)approx. 100 x 29 x 15 ConnectionCable with Molex plug Weight (g)approx. 110  FAQs about the replacement battery for emergency lightsHow do I recognise when the battery in an emergency light needs replacing?Modern emergency lights with autotest function usually indicate a defective or depleted battery by a status LED (e.g. via red flashing). At the latest, if the light no longer passes the annual endurance test for the full emergency lighting period, the battery must be replaced immediately. The typical lifespan of a NiMH battery in this application is approximately 4 years.Why is it important to use the exactly matching plug?The JST plug is a widely used standard in electronics. Using the appropriate pre-assembled plug ensures a polarity-safe and electrically flawless connection to the luminaire electronics. DIY solutions using screw terminals or adhesive tape are not permitted in safety-relevant systems.Can I replace this battery with one with a higher capacity (mAh)?As a rule, this is possible as long as the voltage (4.8V), technology (NiMH) and design are identical. A higher capacity will result in a longer emergency lighting period. However, you must ensure that the battery physically fits into the luminaire housing.How should this battery be disposed of?Batteries must not be disposed of with household waste. As a used device battery, you can return it free of charge at collection points in retail or at municipal recycling centres (e.g. via the GRS collection boxes) to ensure professional and environmentally friendly recycling.

The VARTA V40H is a rechargeable nickel-metal hydride (NiMH) button cell developed for professional use in compact electronic assemblies. With a nominal voltage of 1.2 V and a capacity of 40 mAh, it is the ideal energy solution for memory backup applications (RTC/SRAM), sensor technology and miniaturised devices requiring a reliable and long-lasting power source. Its robust construction and suitability for continuous charging make it a preferred component for industrial original equipment manufacturers (OEM).Highlights at a glanceRechargeable energy: Reliable NiMH technology for high cycle durability and long service life.Compact design: Very flat design (Ø 11.5 mm x 5.35 mm) for use in confined spaces.Backup-optimised: Perfect for buffering real-time clocks (RTC) and memories (SRAM).Industrial quality: Developed for demanding continuous operation and a wide temperature range.OEM component: Ideal for direct integration and soldering onto printed circuit boards (PCB).Reliable power for professional electronicsThe VARTA V40H is the optimal choice for a wide range of professional and industrial applications. Its main function is to back up data in real-time clocks and volatile memories in the event of a power failure. It is found in industrial computers, medical monitoring devices, automotive electronics, smart metering systems, and sensor technology. Wherever a maintenance-free, rechargeable energy source is required in minimal space, the V40H offers a reliable solution.Robust nickel-metal hydride technologyVARTA's proven NiMH technology stands for high reliability and safety. The V40H is designed for the typical requirements of backup applications, particularly for permanent trickle charging over many years. It offers excellent charging and discharging efficiency, a high cycle life, and no unwanted memory effect. Compared to primary batteries, it offers a sustainable and low-maintenance solution.Efficiency and safety in the systemAs a single cell for industrial further processing, the VARTA V40H is subject to the strictest quality controls. Its design ensures a high tightness and resistance to the thermal stresses of the soldering process (when applied correctly). Guaranteed VARTA quality provides developers and manufacturers with a stable and reliable component for mass production and the long-term use of their products. Features                                                                                                                                                                              Model              VARTA NiMH button cell V40H               Battery type              Nickel-metal hydride (NiMH)               Nominal voltage (V)              1.2               Capacity (mAh)              40               Diameter (mm)              11.5               Height (mm)              5.35               Weight (g)              1.7               Connection              Without solder pins (standard)        FAQs on the VARTA NiMH button cell V40HWhat is the main area of application for this NiMH button cell?The V40H is primarily designed as a backup power source for real-time clocks (RTC) and SRAM memory. It is integrated directly on a printed circuit board and is permanently charged by the device circuit to secure the stored data in the event of a power failure.Is this cell suitable for charging with external chargers?No, this cell is an industrial cell designed for installation and charging via a defined charging circuit within a device. It is not intended for handling by end users or for use in conventional chargers.What advantages does NiMH offer compared to a lithium primary cell for backup purposes?While lithium primary cells have a higher voltage and energy density, the main advantage of the NiMH cell is its rechargeability. It does not need to be replaced during the product's lifetime, which reduces maintenance costs and makes it ideal for sealed or hard-to-access devices.How is this cell mounted on a printed circuit board?The V40H is typically assembled with welded solder tags (so-called "tags") and then soldered onto the printed circuit board. Delivery is usually as a raw cell, which is then fitted with the appropriate connections according to customer requirements.How must this battery cell be disposed of?Batteries may not be disposed of with household waste. As an industrial battery, it is subject to the provisions of the Battery Act. Please take used battery cells to the designated industrial or municipal collection points to ensure proper and environmentally friendly recycling.

The XCELL XCELFP1212S is a compact lithium iron phosphate battery (LiFePO₄) with a nominal voltage of 12.8 V and a capacity of 12 Ah. Equipped with an integrated battery management system (BMS), it offers reliable protection against overcharging, deep discharge, short circuit and overtemperature. With over 2000 charge cycles at 80 % depth of discharge, this battery is the ideal choice for applications where longevity, safety and compact dimensions are paramount, for example in mobile energy systems, emergency power supplies or as a replacement for VRLA batteries.Highlights at a glanceCompact power: 12 Ah capacity at 12.8 V – 153.6 Wh total energyDurable: More than 2000 cycles at 80 % depth of discharge (DOD)BMS integrated: Protection against overcharging, deep discharge, short circuit and overtemperatureRobust housing: ABS container seamlessly replaces VRLA batteriesFast charging capability: Efficient charging times with high current acceptancePowerful in diverse applicationsWhether in mobile devices, compact solar storage systems or as a reliable emergency power source: The XCELFP1212S impresses with its versatility. It is lightweight (only 1.21 kg) and compact (151 x 65 x 93.5 mm) and can be used even under demanding environmental conditions from -20 °C to +55 °C. By connecting up to two batteries in parallel or up to four batteries in series, a custom scalable energy system can be built.Efficiency and safety by designThe integrated hardware BMS reliably controls and monitors all charging and discharging processes. It protects against typical risks such as deep discharge or overtemperature, increasing service life and operational safety of the battery. The XCELFP1212S is maintenance-free, gas-free and has no memory effect, ideal for modern energy storage solutions.Robust LiFePO₄ technology for greater safety and longevityEquipped with cylindrical 21700 (3 Ah) LiFePO₄ cells, the battery stands out for its thermal stability, low self-discharge and high cycle life. Compared to conventional lead or lithium batteries, this cell technology offers a significantly higher level of safety and longer service life, even with frequent use under heavy loads.Features  ModelXCELL XCELFP1212S Battery typeLiFePO₄ (lithium iron phosphate) Nominal voltage (V)12.8 Capacity (Ah)12 Maximum discharge current12A (continuous) Recommended charging voltage14.4V - 14.6V Float charging13.6V - 13.8V Operating temperature (°C)Charging: 0 ~ 45 / Discharging: -20 ~ 60 Storage temperature (°C)-10 ~ 35 Service life>2000 cycles at 100% depth of discharge Dimensions (L/W/H, mm)151 x 98 x 100 Weight (kg)approx. 1.5 ConnectionFaston 250 (6.35 mm) Protection circuitIntegrated BMS  FAQs about the XCELFP1212S LiFePO₄ batteryHow many charge cycles does the XCELFP1212S battery offer?The XCELFP1212S achieves more than 2000 charge cycles at 80 % depth of discharge (DOD), which corresponds to a service life of over 10 years depending on application.Is a battery management system (BMS) integrated?Yes, the integrated BMS reliably protects the battery against overcharging, deep discharge, short circuit and overtemperature.For which applications is the XCELFP1212S suitable?The battery is ideal for compact energy storage solutions in fields such as mobile devices, rehabilitation and medical technology, UPS systems, renewable energy installations as well as caravan and marine applications.Can the battery be charged with conventional lead-acid chargers?Yes, the integrated BMS protection circuit allows charging with standard chargers for lead-acid batteries.Is the battery a compact and lightweight replacement for lead-acid batteries?Yes, it is compact, lightweight (approx. 1.21 kg) and replaces 12 V–15 Ah lead-acid batteries more efficiently thanks to low internal resistance and constant voltage characteristics. 

The Tadiran SL-2790S is a revolutionary PulsesPlus hybrid battery in the large case size DD. It was developed for the most demanding long-term applications that require both extremely high energy reserve and the ability to deliver high current pulses. The system combines a long-life lithium thionyl chloride primary cell with a unique hybrid layer capacitor (HLC). With an enormous capacity of 32 Ah, it is the first choice for devices that have to operate completely autonomously for many years.Highlights at a glanceExtremely high capacity: 32 Ah for maximum autonomous operating times over many years.High pulse current capability: Ideal for applications with high peak current requirements (up to 4 A).No voltage drop: The integrated HLC prevents the passivation effect under load.Maximum service life: Low self-discharge of the primary cell and gentle operation.Robust DD form factor: Standardised size for use in demanding industrial applications.Powerful in a wide range of applicationsThe Tadiran SL-2790S is the optimal energy solution for applications that must work for years to decades without maintenance and still need periodic high power for transmission processes. Its main application areas include long-term asset tracking systems for containers or rail vehicles, self-sufficient measuring buoys, seismic measuring stations, professional security and surveillance technology with high energy requirements as well as demanding military applications.The PulsesPlus technology: Maximum energy and performanceThe heart of the PulsesPlus battery is its hybrid design. The high-energy Li-SOCl₂ primary cell with 32 Ah serves as long-term energy storage and continuously charges the hybrid layer capacitor (HLC) connected in parallel. If the application requires a high current pulse, this is delivered directly by the HLC, not by the primary cell. This intelligent system protects the primary cell from high loads, prevents the typical voltage drop due to passivation and so ensures a stable voltage and maximum service life.Superior lithium hybrid technologyBy combining the best features of two technologies, the PulsesPlus battery offers unmatched benefits. It combines the extremely high energy density and low self-discharge of a lithium thionyl chloride cell with the high power density of a capacitor. The result is a power source that remains ready for use over decades and can provide high power immediately when required, even after long periods of inactivity and at low temperatures. Features  ModelTadiran SL-2790/S TechnologyPulsesPlus (Li-SOCl₂ + HLC) Case sizeDD Rated voltage (V)3.6 Capacity (mAh)32000 Max. continuous discharge current1000 mA Max. pulse current5000 mA Self-dischargeapprox. 2% per year Operating temperature (°C)-40 ~ +85 Dimensions (Ø x L, mm)approx. 33.1 x 118.0 Weight (g)approx. 135 ConnectionStandard (industrial head) RechargeableNo  FAQs about this Tadiran PulsesPlus batteryWhat exactly is the PulsesPlus technology?PulsesPlus is a hybrid system that combines a durable lithium primary battery with a rechargeable hybrid capacitor (HLC). The battery provides the energy for a very long service life, while the capacitor provides the high output for current pulses.For which applications is a PulsesPlus battery better than a standard lithium battery?It is ideal for devices that usually consume very little power but periodically require short, high current bursts. A typical example is a self-sufficient measuring buoy that transmits its data to a satellite once a day. A standard battery would experience a voltage drop with this transmission pulse, but not the PulsesPlus battery.Does PulsesPlus completely prevent the passivation effect?Yes, from the application’s point of view, the passivation effect is completely eliminated. Since the high current pulse is supplied by the HLC and not by the primary cell, the primary cell never encounters the high load. As a result, the voltage drop caused by the passivation layer in standard cells is effectively avoided.Does this model have solder or wire connections?No, the model SL-2790S is the standard version with regular battery contacts and is intended for use in a suitable DD battery holder. For direct installation, Tadiran also offers versions of this cell type with different connectors.Is this system rechargeable?No, it is a primary system. The primary cell cannot be recharged from an external source. The integrated capacitor is recharged exclusively by the primary cell itself.

The Tadiran SL-761S is a primary high-performance lithium thionyl chloride battery in the compact special size 2/3 AA. It was designed for maximum reliability and an extremely long operating life in space-critical applications. With a nominal voltage of 3.6 V and a capacity of 1.5 Ah, it is the ideal power solution for professional electronic assemblies where miniaturisation and longevity are important. Its unique chemistry and robust construction guarantee outstanding performance even under the most extreme environmental conditions.Highlights at a glanceCompact design: High energy density in the special 2/3 AA size for miniaturised devices.Reliable capacity: 1.5 Ah for long and self-sufficient operating periods.High nominal voltage: Stable voltage level of 3.6 V during almost the entire service life.Maximum reliability: Extremely low self-discharge rate of less than 1% per year.Outstanding longevity: Designed for more than 10 years of operating and storage life.Extreme temperature range: Fully functional in a temperature range from -55°C to +85°C.Powerful in a wide range of applicationsThanks to its compact 2/3 AA size, the Tadiran SL-761S is ideal for space-critical applications where a standard AA cell would be too large. It is the preferred choice for professional original equipment in compact sensors, for memory backup (RTC, CMOS) on densely populated boards, in smaller alarm systems and in medical technology. Its reliability also makes it indispensable for miniaturised GPS tracking modules and other mobile monitoring devices.Designed for maximum safety and efficiencyThe safety and longevity of the SL-761S are based on its well thought-out construction. The cell has a hermetic glass-to-metal seal, which reliably prevents the electrolyte from leaking. The inorganic electrolyte used is non-flammable and provides a high degree of intrinsic safety. Each cell is designed to deliver its energy consistently and safely over a very long period, minimising maintenance costs and lowering the total operating costs of your application.Superior lithium thionyl chloride technologyLithium thionyl chloride technology (Li-SOCl₂) offers crucial advantages for long-term applications. A characteristic feature is the passivation effect: a thin protective layer forms on the lithium anode, which drastically reduces self-discharge and thus enables extremely long shelf life. This technology ensures that the energy is almost completely available even after years of storage, which distinguishes the SL-761S from all other battery technologies. Characteristics  ModelTadiran SL-761/S TechnologyLithium thionyl chloride (Li-SOCl₂) Size2/3 AA Nominal voltage (V)3.6 Capacity (mAh)1600 Max. continuous discharge current50 mA Self-dischargeapprox. 1% per year Operating temperature (°C)-55 ~ +85 Dimensions (Ø x L, mm)approx. 14.7 x 33.5 Weight (g)approx. 12 ConnectionStandard (industrial head) RechargeableNo  FAQs about the Tadiran SL-761S batteryIs this battery rechargeable?No, the Tadiran SL-761S is a primary lithium battery and must not be charged under any circumstances. Attempting to charge the cell is dangerous and can lead to overheating, leakage or the cell bursting.What does the passivation effect mean for this battery?After longer storage, a protective layer forms on the lithium surface that minimises self-discharge. With the first load, this layer can lead to a short voltage delay. For applications requiring immediate high current pulses, appropriate circuit designs or special battery types should be considered.How long does the battery last and how should it be stored?The battery has a shelf life of more than 10 years. For maximum durability, we recommend storing it in a cool and dry place with low humidity.Which devices is this battery type suitable for?This battery type is intended exclusively for professional and industrial electronics, especially in devices where the available space is very limited. These include compact sensors, memory backup, security technology and miniaturised tracking systems.Does this model have solder connections?No, this SL-761S model is the standard version and is supplied without solder connections. It is intended for use in suitable battery holders. For direct installation on PCBs, Tadiran offers variants of this cell type with different solder connections.What makes this battery safer than other battery types?Safety is ensured by several factors: The hermetic glass-to-metal seal prevents leakage, the inorganic electrolyte is non-flammable and the cell is not under pressure at room temperature. This ensures a high level of operational safety.