Solar cable red 100m 6mm² IEC62930 – SOLR6100 for high-performance PV systems

The Deye SUN-50K-SG01HP3-EU-BM4 is a high-performance hybrid inverter for commercial solar systems with high energy requirements. With 50 kW rated power, four MPPT inputs and support for high-voltage batteries, it offers maximum efficiency, flexibility and safety, ideal for large PV projects, industrial applications and off-grid supply systems.Highlights at a glancePowerful: 50 kW rated power and 55 kW maximum output power Four MPPT inputs with 8 strings for optimum energy yield Parallel connection of up to 10 devices possible 100 % unbalanced output usable per phase Two high-voltage battery inputs (up to 800 V) with 2× 50 A charging/discharging currentEfficient energy conversion for large systemsWith a maximum DC input power of 65,000 W, four MPPT trackers and an efficiency of up to 97.6 %, the Deye SUN-50K-SG01HP3-EU-BM4 is ideal for large-scale photovoltaic systems. The MPPT efficiency of 99.9 % ensures optimum power yield even with partial shading or heterogeneous module fields.Flexibility and scalabilityThis inverter can be used in systems with up to 10 devices connected in parallel, making it particularly suitable for large modular projects. Thanks to two battery inputs with high-voltage support (160–800 V) and a charge/discharge current of 50 A each, it can be flexibly combined with powerful storage systems. The six programmable charge/discharge time windows offer intelligent energy management for self-consumption and grid relief.Reliability and protectionWith IP65 protection class and comprehensive safety functions such as reverse polarity protection, residual current monitoring and overvoltage protection (DC Type II / AC Type III), the inverter is ideally equipped for demanding operating conditions. The intelligent cooling system ensures quiet operation (< 65 dB) even at high power.Who is the Deye SUN-50K-SG01HP3-EU-BM4 suitable for?This inverter is ideal for: Commercial enterprises and industrial plants with very high energy consumption Large-scale projects with multiple battery storage systems and module fields Installers who want to realise future-proof high-voltage systems Off-grid installations with diesel generator connection Grid-parallel storage solutions with intelligent load management  ModelDEYE SUN 50K-SG01 HP3-EU-BM4 Battery input data Battery typeLi-lon Battery voltage range (V)160~800 Max. charging current (A)50+50 Max. discharge current (A)50+50 Number of battery inputs2 Charging strategy for Li-Ion batterySelf-adaptation to BMS Input data of PV string Max. DC input power (W)80000 Rated PV input voltage (V)1000 Starting voltage (V)180 MPP voltage range (V)150-850 Rated DC input voltage (V)600 PV input current (A)36 + 36 + 36 + 36 Max. PV short-circuit current (A)55 + 55 + 55 + 55 Number of MPPT4 Strings per MPPT2 + 2 + 2 + 2 AC output data AC rated power and UPS power (W)50000 Max. AC output power (W)55000 AC output rated current (A)75,8 / 72,5 Max. AC output current (A)83,4 / 79,8 Max. continuous AC throughput (A)200 Peak power (without grid)1.5 times rated power, 10 S Generator input/intelligent load/AC coupling current (A)75,8 / 200 / 75,8 Output power factor0,8 leading to 0,8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesAnti-islanding protection, reverse polarity protection at the PV string input, insulation resistance detection, residual current monitoring unit, output overcurrent protection, output short-circuit protection, output overvoltage protection Overvoltage categoryDC Type II/AC Type III Certifications and standards Grid approvalsVDE4105 IEC61727/62116 VDE0126 AS4777.2 CEI 0 21 EN50549-1 G98 G99 C10-11 UNE217002 NBR16149/NBR16150 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<65 dB Communication with BMSRS485; CAN Weight (kg)80 Size (mm)527B×894H×294T（Without connectors and brackets） Degree of protectionIP65 Installation styleWall bracket Warranty10 years  FAQs about the Deye Sun 50K Hybrid inverterDo I need external NA protection from 50 kW?No. The inverter has an integrated anti-islanding circuit and fulfils all relevant standards such as VDE-AR-N 4105, EN 50549 and G99. Additional NA protection is therefore not required.Which high-voltage storage systems are approved?Officially compatible models include BYD HVS/HVM, Pylontech Force H1/H2, Dyness Tower and the Deye GB-L series. Communication takes place via CAN or RS485, depending on the model. The appropriate setup number is entered directly in the menu “Battery → Lithium → Setup Number” or set via DIP switches. According to the provider, other storage solutions such as BOS-G are already preconfigured.How many kWp can I connect without clipping?According to the data sheet, the maximum DC input power is 65 000 W. The manufacturer even provides for up to 100 000 W PV access power, which results in a DC/AC ratio of 1.3. In practice, a generator size of 60 to 65 kWp is considered optimal. Only above this limit can low clip losses occur on a few high-load days, which remain below two per cent over the course of the year.Can I connect several 50-kW devices in parallel?Yes. Up to ten inverters can be operated in parallel, both grid-connected and off-grid. One device assumes the master function including CT sensor connection, the other units follow automatically in the network.Do I need special ventilation?Active climate technology is not required. The inverter works with intelligent air cooling and is designed for ambient temperatures up to 60 °C. The maximum noise level is 65 dB(A) under full load, in standby mode the device remains virtually silent. Good air circulation is important, for example in a ventilated technical room or in a protected outdoor location. The fan inlets and outlets must remain unobstructed, otherwise charging problems may occur.  Scope of delivery: Deye SUN-50K-SG01HP3-EU-BM4 (50 kW HV hybrid inverter) 1 x Deye SUN-50K-SG01HP3-EU-BM4 inverterAn extremely powerful three-phase high-voltage hybrid inverter with 50 kW power, integrated LCD touchscreen and four MPPT trackers for large commercial photovoltaic systems.1 x Wall Mount BracketA reinforced metal mounting rail for securely fastening the heavy industrial device to a load-bearing wall or mounting frame.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x current transformer (CT - Current Transformer)External split core current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation at high load currents.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the numerous PV strings to the MPPT inputs of the inverter.1 x set of battery connection plugs (high-voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the massive wall bracket.1 x operating manual (User Manual)A printed manual with detailed installation instructions, wiring diagrams and safety instructions.

The Deye BOS-G 60 PRO high-voltage storage set is a reliable and powerful storage solution for commercial applications and demanding private households. With a total capacity of 61.44 kWh, modular expandability and intelligent battery management, it fulfils the highest requirements for safety, efficiency and flexibility.Highlights at a glanceHigh capacity: 61.44 kWh gross storage capacity for large energy systemsUsable energy: 55.30 kWh at 90 per cent depth of dischargeFlexible scalability: Up to 16 battery racks can be operated in parallelIntelligent control: Integrated BMS protects against overcharging, deep discharge and overheatingEasy to use: Quick installation in 19-inch rack formatEfficient energy storage for modern projectsThe BOS-G 60 PRO offers an excellent foundation for integration into existing energy systems with its high voltage of 614.4 volts and a wide operating voltage range of 528 to 700.8 volts. The lithium iron phosphate technology used ensures high safety, low self-discharge and a long service life.Modular and customisableThe system architecture allows flexible expansion to up to 16 parallel battery racks and AC parallel operation of up to 10 Deye inverters. This means that the system can be precisely adapted to increasing requirements and remains expandable in the long term.Safe energy managementThe integrated BMS continuously monitors cell voltages, temperatures and charge levels. It actively protects against critical operating states and optimises the service life of the battery units through automatic cell balancing.Who is the Deye BOS-G 60 PRO suitable for?The high-voltage storage set is ideal for:Commercial enterprises with high energy consumption or emergency power requirementsLarge photovoltaic systems focusing on optimising self-consumptionPrivate households with above-average energy requirementsProject developers who require a modular, certified high-voltage system  ModelDEYBOS-G-PRO Battery typeLiFePO4 Module capacity (kWh)5.12 Module nominal voltage (V)51.2 Module capacity (Ah)100 Max. battery module number in series (optional)5-16 System nominal voltage (V)256-819.2 System operating voltage (V)220~934.4 System capacity (kWh)25.6-81.92 System usable capacity (kWh)23.04-73.73 Charging/discharging current (A) - Recommendation50 Charging/discharging current (A) - Nominal value100 Charging/discharging current (A) - Peak discharge (2 min,25°C)125 Operating temperature (°C)Charge: 0 ~ 55 / Discharge: -20 ~ 55 Display system indicator Yellow : Battery High VoltagePower On Red : Battery System Alarm Communication connectionCAN2.0, RS485 Humidity5% ~ 85%RH Altitude≤3000m IP protection class of the housingIP20 Storage temperature (°C)0 ~ 35 Dimensions (W/D/H, mm)530 * 602 * 2219 Weight (kg)290-837 Installation locationFloor mounting Recommended depth of discharge90% Cycle lifetime25 ± 2°C, 0.5C/0.5C, EOL70% ≥ 6000 Warranty10 years CertificationsUN38.3 / CE / CE-EMC / IEC62040 / CEC / VDE  FAQs about the Deye BOS-G 60 PRO high-voltage storage setWhat storage capacity does the BOS‑G 60 PRO provide and how much of it is usable?The set consists of 12 LiFePO₄ modules, each with a gross capacity of 5.12 kWh, giving a total storage capacity of 61.44 kWh. Thanks to the recommended 90% depth of discharge (DoD), around 55.3 kWh of usable net energy is available, ideal for large private households or commercial applications.What protection and management functions does the BMS perform?The integrated battery management system (BMS) continuously monitors and protects against overvoltage, undervoltage, overcurrent, short circuit and temperature deviations. It also actively balances all cells and ensures optimal charging and discharging conditions.Which electrical parameters (voltage & current) are relevant?Operating voltage: between 528 V and 700.8 V, nominal voltage at 614.4 V DCMaximum continuous current: 100 AShort-term peak current: 125 A (approx. 2 minutes)Is the system modularly expandable?Yes, the modular concept makes it possible to operate several BOS‑G 60 PRO storage units in parallel. Up to 16 tanks (racks) in series and up to 10 inverters in the AC network are possible to scale capacity and redundancy as required.In which temperature range can the storage system be operated?Discharge: from −20 °C to +55 °CCharge: from 0 °C to +55 °C This makes the system suitable for a wide range of climate zones, from cold garages to warm attics. Scope of delivery Deye BOS-G60 PRO high-voltage storage set (61.44 kWh) with rack system: System compositionThis product is a set and consists of a rack cabinet and the 13 individual slide-in modules (1x BMS and 12x batteries).Component 1: Deye rack system / battery cabinetA cabinet to hold the BMS unit and the battery modules, often with rollers and feet.Component 2: Deye control box / BMS slide-in moduleThe central control unit (BMS/BCCB), which is inserted into the rack cabinet as a module.Component 3 to 14: Twelve Deye BOS-G-PRO-Pack5.1 high-voltage battery slide-in modules (each 5.12 kWh)Twelve pure high-voltage battery modules, which are also inserted into the rack cabinet.1 x set of battery connection cables (plus & minus)A pair of special high-voltage power cables to connect the BMS module to a compatible high-voltage hybrid inverter.1 x communication cable (CAN/RS485)A long data cable for communication between the BMS module and the inverter.12 x connection bridge / series connection cableShort, robust cables or fixed bridges to connect the thirteen slide-in modules (BMS + 12 batteries) in the rack with each other.1 x earthing cableA protective conductor cable to earth the rack system in accordance with regulations.1 x mounting accessories (rack mounting)Includes screws and rails for fixing the modules inside the rack as well as material for anchoring the cabinet to the floor.1 x operating and installation manualA printed manual describing the assembly of the complete rack system.

The JA Solar JAM54D40 455/LB bifacial solar module is part of the Deep Blue 4.0 Pro series and has been developed for maximum energy yield, long service life and high efficiency. With the latest n-type technology, bifacial design and double-sided glass structure, the module is ideal for demanding private and commercial photovoltaic systems.Highlights at a glancePowerful: 455 W rated power with up to 22.6% module efficiencyBifacial energy yield: Rear side efficiency up to 80% (±5%)High reliability: Over 6,000 charge cycles at 70% EOL powerLow degradation: Only 0.4% power loss per year over 30 yearsRobust design: Double glass module with 1.6 mm glass thickness front and rearDurable: 25 years product warranty, 30 years performance guaranteeState-of-the-art n-type cell technologyThe module is based on n-type Bycium++ cell technology with 16 busbars (MBB half-cell). This reduces the power loss caused by light-induced degradation (LID) and ensures better performance in low light conditions as well as a higher overall energy yield.High performance under real conditionsThe JAM54D40 455/LB delivers strong performance not only under standard test conditions, but also at high ambient temperatures, low irradiation and when used bifacially. The bifacial rear-side absorption can achieve an additional yield of up to 30% with optimum installation.Robust construction for high loadsThe module is designed for a maximum static front load of 5400 Pa and a back load of 2400 Pa. The junction box is IP68 rated, ensuring a safe operation under a wide range of weather conditions. Suitable for applications from -40 °C to +85 °C.   Electrical parameters at STC Maximum rated power (Pmax) (W)455 Open-circuit voltage (Voc) (V)39.50 Maximum power voltage (Vmp) (V)33.00 Short-circuit current (Isc) (A)14.56 Maximum power current (Imp) (A)13.79 Module efficiency (%)22.8 Operating conditions Maximum system voltage1500V DC Operating temperature–40°C ... +85°C Maximum rated power of series fuse30A General data Dimensions (W / H / D)1762/1134/30mm Weight22 kg   Who is the JA Solar JAM54D40 455/LB suitable for?Installers and system planners focusing on performance and durabilityOperators of rooftop systems wanting to benefit from additional bifacial yieldCustomers looking for a visually appealing full black solution with high energy yieldProjects with demands for low degradation and high environmental resilienceFrequently asked questions (FAQ) about the JA Solar JAM54D40 455/LBWhat does "bifacial" mean for this module?The module uses bifacial cells that are light-sensitive on both the front and rear sides. This means that reflected light from the rear side can also be converted into electricity, which can increase energy yield by up to 30 percent depending on the installation environment.What is the difference between n-type and p-type cells?n-type cells, as in the JAM54D40 455/LB, have higher efficiency, lower light-induced degradation (LID) and better low-light performance compared to conventional p-type cells.How large is the module and how much does it weigh?The module measures 1134 × 1762 × 30 mm and weighs 22 kg. It features a double glass design with 1.6 mm glass thickness on the front and rear sides.How long is the warranty?JA Solar offers 25 years product warranty and 30 years linear performance guarantee with a maximum annual degradation of only 0.4 percent.Is the module suitable for use in extreme climate zones?Yes, the module is designed for operating temperatures from -40 °C to +85 °C and can withstand a front load of up to 5400 Pa and a back load of up to 2400 Pa. The junction box is rated to IP68.Which inverters is the module compatible with?The module is compatible with all standard inverters designed for a system voltage of up to 1500V DC. The junction boxes are equipped with MC4-EVO2 connectors.What is the best way to install the module?The module is suitable for both rooftop and ground-mounted systems. It can be installed in landscape or portrait format. The cable length is adapted to the orientation in each case.How robust is the module against environmental influences?Thanks to its glass-glass design and black aluminium frame, the module withstands extreme loads, designed for snow loads up to 5,400 Pa and wind loads up to 2,400 Pa. The rear foil and robust frame construction provide reliable protection against moisture and environmental influences.  

The solar cable SOLS6100 (100 metres, 6mm²) in black is the professional solution for photovoltaic installations where maximum efficiency and minimal resistance are paramount. With a length of 100 metres on a reel and a reinforced cross-section of 6mm², this cable is excellent for large roof systems, open-area projects or systems with high currents. The black identification enables standard-compliant identification of the negative pole (-) and ensures clearly arranged cabling.Certified in accordance with the international standard IEC 62930, this cable offers maximum safety for modern PV systems with voltages of up to 1500V DC. The larger cross-section minimises voltage losses even over long distances and is ideal for high-performance module generations delivering high currents.Highlights at a glanceMaximum efficiency: The 6mm² cross-section significantly reduces the electrical resistance and provides more yield compared to standard cables.Certified safety: Complies with IEC 62930 (H1Z2Z2-K) standard for use in photovoltaic systems up to 1500V DC.Long range: 100 metres in one piece enable custom cuts for tailor-made string connections without unnecessary separation points.Extremely resistant: The high-quality XLPO double insulation is UV-resistant, ozone-resistant and flame-retardant for a lifespan of more than 25 years.Corrosion-protected conductor: Fine-stranded, tinned copper offers permanently optimum conductivity and protects against oxidation in a damp environment.Wide temperature range: Safe operation in extreme weather conditions from -40°C to +90°C (short-term peaks up to +120°C).Areas of applicationThe SOLS6100 is the number one choice for demanding PV projects:Large roof systems & PV parksEfficient string cabling and connection of distant module fields to the central inverter.High-performance balcony power plantsIdeal for systems with modern modules (500Wp+), to ensure the loss-free transport of high currents.Battery storage & stand-alone systemsPerfect for 24V or 48V systems where low voltage drops are crucial for charging efficiency.Assembly & safety instructionsProfessional connectionsFor this cross-section, use only MC4 connectors that are explicitly approved for 6mm² cable, and use high-quality crimping pliers.Mechanical protectionWhen laying on the roof or through walls, use corrugated ducts or cable ducts to protect the insulation from mechanical abrasion and rodent bites.Parallel cable routingRoute the black negative cable as parallel and close as possible to the red positive cable to minimise electromagnetic interference fields (induction loops). Features Model / SKU**SOLS6100** Conductor cross-section**6.0 mm²** Delivery form**100 metre reel** ColourBlack (negative pole) Rated voltageDC: 1.5 kV / Max. 1.8 kV Conductor materialCopper, tinned (Class 5) Temperature range-40°C to +120°C (on the conductor) Standardisation**IEC 62930 / EN 50618** Special featureHalogen-free, UV- & ozone-resistant  FAQs about solar cable black 100m 6mm²Why should I choose 6mm² instead of 4mm²?For more yield and future-proofing.Especially for cable lengths above 15–20 metres or when using modules with high current (Isc above 13A), voltage drop is noticeably lower with 6mm². This means more energy reaches the inverter and the cable stays cooler under high load.Can the cable be laid directly in the ground?Only in protective conduit.Although the insulation is very robust, the cable is not designed for direct burial without protection. Installation in a suitable cable conduit in the ground, however, is no problem.Is the cable resistant to chemicals?Yes.The XLPO insulation is resistant to acids, alkalis and ammonia. This makes it particularly suitable for agricultural (stables) or industrially impacted areas.