Skip to main content Skip to search Skip to main navigation
Menu
Description

Product information

The Deye SUN-8K-SG05LP3-EU-SM2 is a high-performance three-phase hybrid inverter. It has been specially designed for domestic and commercial applications and combines an inverter, battery charger and intelligent energy management system in a single unit. This all-in-one solution is ideal for new installations as well as for retrofitting existing photovoltaic systems, and reliably maximises self-consumption and energy efficiency.

Highlights at a glance

  • Supports both Both lead-acid and lithium-ion batteries for flexible storage solutions
  • Battery voltage range from 40 to 60 volts for different storage requirements
  • Maximum charging and discharging current of 190 amps enables rapid power transmission
  • Maximum PV input power of 12,000 watts for larger solar installations
  • Unbalanced output power with up to 50 per cent of the rated power per phase, enabling flexible load distribution
  • Parallel connection of up to 10 devices for customisable system sizes

Efficient energy conversion for modern requirements

The Deye SUN-8K-SG05LP3-EU-SM2 offers a maximum efficiency of 97.6 per cent and an MPPT efficiency of over 99 per cent. The wide MPPT voltage range of 200 to 650 volts ensures that a high energy yield is achieved even under varying sunlight conditions. With a maximum PV input voltage of 800 volts, the inverter is ideally suited to high-output solar panel arrays. It thus helps to sustainably increase the cost-effectiveness and profitability of the photovoltaic system.

Flexibility and scalability

The Deye SUN-8K-SG05LP3-EU-SM2 can be flexibly adapted to different requirements. With the ability to operate up to ten units in parallel, the system can be scaled for both smaller and larger energy projects. AC coupling enables easy integration into existing solar systems without the need for extensive modifications. Thanks to its support for both lead-acid and lithium-ion battery types, the inverter offers a high degree of adaptability to individual storage solutions.

Reliability and protection

With an IP65 protection rating, the inverter is optimally protected against dust and water and is therefore suitable for use in a wide variety of environments. The operating temperature range of minus 40 to plus 60 degrees Celsius ensures reliable operation even under extreme weather conditions. Comprehensive protection functions, such as overcurrent, overvoltage, short-circuit and thermal protection, DC reverse polarity protection and DC insulation impedance monitoring, ensure a high level of operational safety and a long service life for the unit.

Who is the Deye SUN-8K-SG05LP3-EU-SM2 suitable for?

This inverter is ideal for

  • Homeowners looking for a high-performance and flexible solution for self-consumption and grid independence
  • Commercial enterprises requiring a stable and efficient power supply
  • Users who wish to retrofit existing solar systems with modern storage solutions
  • Installations in regions with an unstable mains supply, where diesel generators provide additional security of supply
 

FAQs on the 8 kW Deye Sun Hybrid inverter

Which battery types does the inverter support?

The inverter is compatible with lead-acid and lithium-ion batteries within a voltage range of 40 to 60 volts.

What is the maximum charging and discharging current?

The maximum charging and discharging current is 190 amps, which enables rapid energy transfer.

What protection functions are integrated into the Deye?

The inverter offers protection mechanisms such as DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, an optional arc fault circuit interrupter, islanding protection, a DC switch, insulation impedance detection, earth fault detection and Class II overvoltage protection for DC and AC.

Is the inverter suitable for retrofitting existing systems?

Yes, thanks to AC coupling, the inverter can be easily integrated into existing solar systems.

Can the inverter supply unbalanced loads?

Yes, the inverter can supply an unbalanced load of up to 100 per cent, with each phase capable of delivering up to 50 per cent of the rated power.


 

Scope of delivery: Deye SUN-8K-SG05LP3-EU-SM2 (8 kW LV hybrid inverter)

 

1 x Deye SUN-8K-SG05LP3-EU-SM2 inverter

  • A three-phase hybrid inverter with an 8 kW output, an integrated colour LCD touchscreen and support for 48V low-voltage battery systems.

1 x wall mount bracket

  • A sturdy metal mounting rail for securely fixing the unit to a load-bearing wall.

1 x Wi-Fi stick (data logger)

  • A plug-in communication module for connecting to the internet, enabling remote monitoring via the Deye cloud or the Solarman app.

3 x current transformers (CT)

  • External fold-out current transformers for measuring energy flows at the property connection, required for net metering and optimising self-consumption.

1 x set of PV connectors (MC4-compatible)

  • The required pairs of DC connectors (positive and negative) for connecting the PV strings to the inverter.

1 x communication cable (BMS)

  • A pre-assembled RJ45 data cable for connecting the inverter to the battery management system.

1 x fitting kit (screws and wall plugs)

  • A set of stainless steel screws and heavy-duty wall plugs for the correct installation of the wall bracket.

1 x User Manual

  • A printed manual containing detailed installation instructions, circuit diagrams and safety instructions.
Properties
AC output rated current: 11.6 A
Battery technology (link): Li-ion / LiFePo4
Battery voltage range: 40–60 V
Communication: RS485 / RS232 / CAN
Dimensions (W x D x H): 386 x 250 x 660 mm
Grid approvals: IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Guideline R25, G98, G99, VDE-AR-N 4105
MPPT efficiency: > 99 %
MPPT voltage range: 200–650 V
MPP trackers / strings per tracker: 2 / 1+1
Max. AC apparent power: 10 kVA
Max. AC output current: 12.8 A
Max. DC input power: 12,000 W
Max. DC input voltage: 800 V
Max. PV input current: 20 + 20 A
Max. charge/discharge current: 190 A / 190 A
Max. efficiency: 97.60 %
Max. short-circuit current: 30 + 30 A
Monitoring: GPRS / Wi-Fi / Bluetooth / 4G / LAN (optional)
Nominal DC voltage: 550 V
Number of battery inputs: 1
Operating temperature: –40 to +60 °C
Overvoltage category: OVC II (DC) / OVC III (AC)
Protection class: IP65
Rated AC active power: 8,000 W
Safety / EMC / Standards: IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
Starting voltage: 160 V
Surge protection: TYPE II (DC) / TYPE II (AC)
Type: Three-phase hybrid inverter (low voltage)
Warranty: 10 years
Weight: approx. 35.2 kg
Documents 1
Reviews 0

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

Customers also bought

DEYSE-F12
Deye SE-F12-C – Advanced energy storage system with 11.8 kWh (LiFePO4)

The Deye SE-F12 is a state-of-the-art low-voltage energy storage system (48V / 51.2V), designed for maximum reliability and performance in residential and commercial solar installations. With an impressive rated capacity of 11.8 kWh (approx. 230 Ah) in a single, compact housing, this storage system offers an excellent balance of high energy density and proven safety.Thanks to the long-lasting lithium iron phosphate (LiFePO4) cell chemistry and the intelligent battery management system (BMS), the SE-F12 is the ideal choice for users who wish to maximise their self-sufficiency. The system’s enormous scalability also makes it a flexible and future-proof investment in your own energy independence.Highlights at a glanceHigh storage capacity (11.8 kWh): It offers a massive 230 Ah at a nominal voltage of 51.2 V in a single module, which drastically reduces the amount of cabling required compared to smaller 5 kWh blocks.Safe LiFePO4 technology: It uses lithium iron phosphate, the safest and most thermally stable cell chemistry on the market, with no risk of thermal runaway.High-performance power handling: Enables a maximum continuous discharge current of 230 A (approx. 11.5 kW output) and peak currents of up to 280 A for 10 seconds – ideal for high-power loads such as heat pumps or electric vehicle charging points.Extreme scalability: The system scales to meet your requirements. Up to 32 units can be connected in parallel as standard (with a CAN bridge, this can be increased to up to 64 units for a storage capacity of up to 18 MWh).Smart monitoring: Equipped with LED status indicators as well as Bluetooth, RS485 and CAN2.0. Seamless integration with the Deye app enables precise real-time monitoring on your smartphone.Long service life: Certified for over 6,000 cycles (at 80 % depth of discharge / DoD), which corresponds to a service life of 15+ years with daily charging and discharging.Flexible installation: Certified to IP21, the enclosure supports both wall-mounted and floor-standing (stacked) installation to make optimum use of space in the plant room.Areas of applicationThe Deye SE-F12 is extremely versatile and is primarily suitable for:Detached houses: To maximise self-consumption and as a robust emergency power storage solution in combination with hybrid inverters.Commercial systems (C&I): For peak shaving and the storage of large PV yields on agricultural or commercial premises.Off-grid systems: Its high continuous load capacity easily handles self-sufficient off-grid systems with high inrush currents.Installation & Safety InstructionsTransport and handling: Weighing 84 kg the module is extremely heavy. You must ensure that it is carried into the basement or plant room by two people or using suitable lifting equipment (e.g. a stair climber).Temperature management: Although the battery operates within a wide temperature range (-20°C to 55°C during discharge), it should be stored in a frost-free, dry room (15°C to 25°C) to ensure maximum service life and capacity retention. Charging below 0°C is blocked by the integrated BMS for safety reasons.Cable sizing: To transmit the enormous maximum continuous current of 230 A without voltage drops or dangerous heat build-up, high-quality battery cables with a cross-section of at least 70 mm² (preferably 95 mm²) between the storage unit and the busbar or inverter is essential.Compatibility: The system natively supports the Deye protocol and works best via Plug & Play with Deye low-voltage hybrid inverters (e.g. the SUN-10K or 12K-SG04LP3 series). FAQs on the Deye SE-F12Can I use this battery with an inverter from another brand?In principle, yes. The Deye SE-F12 uses standard communication protocols (CAN/RS485) and can often be operated with compatible third-party brands. However, the correct BMS protocol must be manually configured on the battery (via software or DIP switches). Neither the manufacturer nor the retailer provides any support for setting up the system for use with third-party products. A fully functional system can only be guaranteed when using the Deye own-brand product. Please check the compatibility list in advance.What happens in the event of a power cut at home?If you combine the SE-F12 with a hybrid inverter capable of providing emergency power (such as the Deye SG04 series), the system will switch to battery operation within milliseconds in the event of a mains power failure. Thanks to the high discharge power (up to 11.5 kW from a single battery), you can continue to supply even large three-phase loads on the domestic circuit without any problems.Why do some shops list it as "SE-F12-C"?The abbreviation "-C" usually refers to the latest model revision (often the EU version), which is fitted with an integrated LCD display on the front of the casing. This allows cell voltages and SoC to be read directly. The raw performance specifications for the standard SE-F12 are identical.