Skip to main content Skip to search Skip to main navigation
Menu
Description

Product information

The Deye SE-F12 is a state-of-the-art low-voltage energy storage system (48V / 51.2V), designed for maximum reliability and performance in residential and commercial solar installations. With an impressive rated capacity of 11.8 kWh (approx. 230 Ah) in a single, compact housing, this storage system offers an excellent balance of high energy density and proven safety.

Thanks to the long-lasting lithium iron phosphate (LiFePO4) cell chemistry and the intelligent battery management system (BMS), the SE-F12 is the ideal choice for users who wish to maximise their self-sufficiency. The system’s enormous scalability also makes it a flexible and future-proof investment in your own energy independence.

Highlights at a glance

  • High storage capacity (11.8 kWh): It offers a massive 230 Ah at a nominal voltage of 51.2 V in a single module, which drastically reduces the amount of cabling required compared to smaller 5 kWh blocks.
  • Safe LiFePO4 technology: It uses lithium iron phosphate, the safest and most thermally stable cell chemistry on the market, with no risk of thermal runaway.
  • High-performance power handling: Enables a maximum continuous discharge current of 230 A (approx. 11.5 kW output) and peak currents of up to 280 A for 10 seconds – ideal for high-power loads such as heat pumps or electric vehicle charging points.
  • Extreme scalability: The system scales to meet your requirements. Up to 32 units can be connected in parallel as standard (with a CAN bridge, this can be increased to up to 64 units for a storage capacity of up to 18 MWh).
  • Smart monitoring: Equipped with LED status indicators as well as Bluetooth, RS485 and CAN2.0. Seamless integration with the Deye app enables precise real-time monitoring on your smartphone.
  • Long service life: Certified for over 6,000 cycles (at 80 % depth of discharge / DoD), which corresponds to a service life of 15+ years with daily charging and discharging.
  • Flexible installation: Certified to IP21, the enclosure supports both wall-mounted and floor-standing (stacked) installation to make optimum use of space in the plant room.

Areas of application

The Deye SE-F12 is extremely versatile and is primarily suitable for:

  • Detached houses: To maximise self-consumption and as a robust emergency power storage solution in combination with hybrid inverters.
  • Commercial systems (C&I): For peak shaving and the storage of large PV yields on agricultural or commercial premises.
  • Off-grid systems: Its high continuous load capacity easily handles self-sufficient off-grid systems with high inrush currents.

Installation & Safety Instructions

  • Transport and handling: Weighing 84 kg the module is extremely heavy. You must ensure that it is carried into the basement or plant room by two people or using suitable lifting equipment (e.g. a stair climber).
  • Temperature management: Although the battery operates within a wide temperature range (-20°C to 55°C during discharge), it should be stored in a frost-free, dry room (15°C to 25°C) to ensure maximum service life and capacity retention. Charging below 0°C is blocked by the integrated BMS for safety reasons.
  • Cable sizing: To transmit the enormous maximum continuous current of 230 A without voltage drops or dangerous heat build-up, high-quality battery cables with a cross-section of at least 70 mm² (preferably 95 mm²) between the storage unit and the busbar or inverter is essential.
  • Compatibility: The system natively supports the Deye protocol and works best via Plug & Play with Deye low-voltage hybrid inverters (e.g. the SUN-10K or 12K-SG04LP3 series).
 

FAQs on the Deye SE-F12

Can I use this battery with an inverter from another brand?

In principle, yes. The Deye SE-F12 uses standard communication protocols (CAN/RS485) and can often be operated with compatible third-party brands. However, the correct BMS protocol must be manually configured on the battery (via software or DIP switches). Neither the manufacturer nor the retailer provides any support for setting up the system for use with third-party products. A fully functional system can only be guaranteed when using the Deye own-brand product. Please check the compatibility list in advance.

What happens in the event of a power cut at home?

If you combine the SE-F12 with a hybrid inverter capable of providing emergency power (such as the Deye SG04 series), the system will switch to battery operation within milliseconds in the event of a mains power failure. Thanks to the high discharge power (up to 11.5 kW from a single battery), you can continue to supply even large three-phase loads on the domestic circuit without any problems.

Why do some shops list it as "SE-F12-C"?

The abbreviation "-C" usually refers to the latest model revision (often the EU version), which is fitted with an integrated LCD display on the front of the casing. This allows cell voltages and SoC to be read directly. The raw performance specifications for the standard SE-F12 are identical.

Properties
Battery technology: LiFePO4
Certifications: UN38.3 / CE / CB
Charge/discharge current (rated value): 115 A / 115 A
Communication: CAN2.0 / RS485 / Bluetooth+APP
Cycle life: ≥ 6,000 cycles (at 25 ± 2 °C, 70% EOL)
Dimensions (W x D x H): 400 x 233 x 559 mm
Maximum discharge current: 280 A (peak for 10 seconds)
Operating temperature (charging): 0 °C to +55 °C
Operating temperature (discharge): -20 °C to +55 °C
Operating voltage range : 44.8 ~ 57.6 V
Permissible humidity: 0% - 95%
Protection class: IP21
System capacity (rated value): 11.8 kWh
System nominal voltage : 51.2 V
Usable capacity: 11.8 kWh
Warranty: 10 years
Weight: approx. 84 kg
Documents 1
Reviews 0

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

Customers also bought

ENEL92ULTIMATE
Energizer Ultimate lithium battery L92 AAA 1.5V (box of 10 / loose) - L92ULTIMATE

Energizer Ultimate Lithium L92 in Pack of 10 is the efficient bulk pack for professional users, businesses and frequent users. You receive 10 loose batteries in a space-saving folding box, without the usual plastic and cardboard waste associated with individual blister packs. This option is not only more environmentally friendly, but often offers better value for money too. Technically, you’re getting the exact same high-end cell as you would in a shop: the world’s longest-lasting AAA battery for extreme use, long-term storage and power-hungry devices.Highlights at a glanceValue pack (10 pieces): Delivery as loose items in a cardboard box reduces packaging waste to a minimum and allows for quick removal – ideal for immediate use in multiple devices.The world’s longest-lasting AAA battery: Offers maximum energy density for high-tech devices and lasts up to 11 times longer than standard alkaline batteries in digital cameras.20-year shelf life: Thanks to the extremely stable lithium chemistry, you can easily store this box for two decades without the batteries ageing significantly (perfect as an emergency supply).Extreme temperature range: They work absolutely reliably from freezing -40 °C to scorching +60 °C, where conventional batteries fail immediately.Ultra-light: Each battery weighs about a third less than a standard alkaline battery, which means a significant weight saving when carrying 10 of them (e.g. on expeditions).Leak-proof: The advanced design prevents acid or electrolyte leakage, thereby providing long-term protection for your valuable devices.The solution for industry and bulk buyersThis pack of 10 is the standard for IT departments (keyboards/mice), Security services (torches/two-way radios) and Facility Management (replacement in thermostats or sensors). Also for Outdoor groups For photographers who need to power flash units and remote triggers, quick access to loose batteries without the hassle of tearing open blister packs is a major advantage. Features ModelEnergizer Ultimate Lithium L92 (box of 10 / bulk) UsageEvent technology (bodypacks), industry, door locks, public authorities TechnologyLithium iron sulphide (LiFeS₂) – Primary (Non-rechargeable!) Voltage1.5 V (high-current capable & stable) Battery lifeMaximum Performance (up to 11 times longer-lasting than alkaline) Shelf life20 years (ideal for stocking up) Dimensions (L x W x H in mm)44.5 x 10.5 (standard AAA / Micro / FR03) Temperature range-40°C to +60°C Packaging unit10 pieces loose in a cardboard box (no blister pack!) Special featuresEnvironmentally friendly (less waste), quick to use, leak-proof Weight (g)approx. 7.6 (per battery)  FAQs on the Energizer L92 in a pack of 10Are these batteries any different from the ones in the blister pack?No, technically they are identical. It’s exactly the same Energizer Ultimate Lithium L92 cell. The only difference is the packaging: instead of being individually shrink-wrapped in plastic and cardboard, the batteries are loose in a small cardboard box. This saves space and reduces waste.What’s the best way to store a partially used box?Cool, dry and short-circuit-proof. As the batteries are loose inside the box, please ensure that no conductive objects (paper clips, coins) fall into the box. When removing individual batteries, please close the box again. Thanks to lithium technology, you can store the box in a cool cellar or storeroom for up to 20 years without any problems.Is the pack of 10 cheaper?Generally speaking, yes. As the manufacturer saves on the cost of elaborate individual retail packaging (blister pack), this price saving is often passed on to the customer. The ‘unit price’ for bulk goods is usually more attractive than that of a pack of 4 in a blister pack.Is this pack worth it for VR controllers?Absolutely. Modern VR controllers (e.g. Oculus/Meta Quest) require a lot of power and benefit enormously from the low weight of lithium batteries (faster hand movements, less fatigue). As you usually have two controllers and play intensively, a pack of ten makes a lot of sense here.

DEYSUN8KSG05LP3EUSM2
Deye SUN-8K-SG05LP3-EU-SM2 Three-phase low-voltage hybrid inverter 8 kW

The Deye SUN-8K-SG05LP3-EU-SM2 is a high-performance three-phase hybrid inverter. It has been specially designed for domestic and commercial applications and combines an inverter, battery charger and intelligent energy management system in a single unit. This all-in-one solution is ideal for new installations as well as for retrofitting existing photovoltaic systems, and reliably maximises self-consumption and energy efficiency.Highlights at a glanceSupports both Both lead-acid and lithium-ion batteries for flexible storage solutionsBattery voltage range from 40 to 60 volts for different storage requirementsMaximum charging and discharging current of 190 amps enables rapid power transmissionMaximum PV input power of 12,000 watts for larger solar installationsUnbalanced output power with up to 50 per cent of the rated power per phase, enabling flexible load distributionParallel connection of up to 10 devices for customisable system sizesEfficient energy conversion for modern requirementsThe Deye SUN-8K-SG05LP3-EU-SM2 offers a maximum efficiency of 97.6 per cent and an MPPT efficiency of over 99 per cent. The wide MPPT voltage range of 200 to 650 volts ensures that a high energy yield is achieved even under varying sunlight conditions. With a maximum PV input voltage of 800 volts, the inverter is ideally suited to high-output solar panel arrays. It thus helps to sustainably increase the cost-effectiveness and profitability of the photovoltaic system.Flexibility and scalabilityThe Deye SUN-8K-SG05LP3-EU-SM2 can be flexibly adapted to different requirements. With the ability to operate up to ten units in parallel, the system can be scaled for both smaller and larger energy projects. AC coupling enables easy integration into existing solar systems without the need for extensive modifications. Thanks to its support for both lead-acid and lithium-ion battery types, the inverter offers a high degree of adaptability to individual storage solutions.Reliability and protectionWith an IP65 protection rating, the inverter is optimally protected against dust and water and is therefore suitable for use in a wide variety of environments. The operating temperature range of minus 40 to plus 60 degrees Celsius ensures reliable operation even under extreme weather conditions. Comprehensive protection functions, such as overcurrent, overvoltage, short-circuit and thermal protection, DC reverse polarity protection and DC insulation impedance monitoring, ensure a high level of operational safety and a long service life for the unit.Who is the Deye SUN-8K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forHomeowners looking for a high-performance and flexible solution for self-consumption and grid independenceCommercial enterprises requiring a stable and efficient power supplyUsers who wish to retrofit existing solar systems with modern storage solutionsInstallations in regions with an unstable mains supply, where diesel generators provide additional security of supply FAQs on the 8 kW Deye Sun Hybrid inverterWhich battery types does the inverter support?The inverter is compatible with lead-acid and lithium-ion batteries within a voltage range of 40 to 60 volts.What is the maximum charging and discharging current?The maximum charging and discharging current is 190 amps, which enables rapid energy transfer.What protection functions are integrated into the Deye?The inverter offers protection mechanisms such as DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, an optional arc fault circuit interrupter, islanding protection, a DC switch, insulation impedance detection, earth fault detection and Class II overvoltage protection for DC and AC.Is the inverter suitable for retrofitting existing systems?Yes, thanks to AC coupling, the inverter can be easily integrated into existing solar systems.Can the inverter supply unbalanced loads?Yes, the inverter can supply an unbalanced load of up to 100 per cent, with each phase capable of delivering up to 50 per cent of the rated power. Scope of delivery: Deye SUN-8K-SG05LP3-EU-SM2 (8 kW LV hybrid inverter) 1 x Deye SUN-8K-SG05LP3-EU-SM2 inverterA three-phase hybrid inverter with an 8 kW output, an integrated colour LCD touchscreen and support for 48V low-voltage battery systems.1 x wall mount bracketA sturdy metal mounting rail for securely fixing the unit to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the internet, enabling remote monitoring via the Deye cloud or the Solarman app.3 x current transformers (CT)External fold-out current transformers for measuring energy flows at the property connection, required for net metering and optimising self-consumption.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (positive and negative) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter to the battery management system.1 x fitting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for the correct installation of the wall bracket.1 x User ManualA printed manual containing detailed installation instructions, circuit diagrams and safety instructions.

DEYSUN10KSG05LP3EUSM2
Deye SUN-10K-SG05LP3-EU-SM2 Three-phase low-voltage hybrid inverter 10 kW

The Deye SUN-10K-SG05LP3-EU-SM2 is a high-performance three-phase hybrid inverter designed for both domestic and commercial solar installations. It integrates solar power, battery storage and mains power into a smart energy management system to ensure maximum efficiency and flexibility. This inverter is a future-proof and robust solution for a sustainable energy supply and is ideal for new installations as well as for retrofitting existing systems.Highlights at a glanceSupports lead-acid and lithium-ion batteries for flexible storage solutionsMaximum charging and discharging current of 210 amps for rapid power transmissionMaximum PV input power of 15,000 watts for high-performance solar systemsTwo independent MPPT inputs for the optimal utilisation of solar energy with different module orientationsUnbalanced output power with up to 50 per cent of the rated power per phase for flexible load distributionParallel connection of up to 10 devices for individually scalable systemsEfficient energy conversion for modern requirementsThe Deye SUN-10K-SG05LP3-EU-SM2 achieves a maximum efficiency of 97.6 per cent and an MPPT efficiency of over 99 per cent. With an MPPT voltage range of 200 to 650 volts and a maximum PV input voltage of 800 volts, the inverter operates reliably and efficiently even under varying irradiance conditions. This ensures optimal utilisation of solar energy and cost-effective operation of the entire system.Flexibility and scalabilityThe Deye SUN-10K-SG05LP3-EU-SM2 offers maximum flexibility thanks to the option of operating up to ten units in parallel. This allows for easy adaptation to different power requirements. AC coupling enables straightforward integration into existing systems without the need for major alterations to the existing infrastructure. Thanks to support for both lead-acid and lithium-ion batteries, bespoke storage solutions can be implemented that are tailored to specific requirements.Reliability and protectionThe inverter has an IP65 protection rating against dust and water and is therefore suitable for use in demanding environmental conditions. A wide operating temperature range from minus 40 to plus 60 degrees Celsius ensures reliable operation even under extreme conditions. Comprehensive protection functions, such as overcurrent, overvoltage, short-circuit and thermal protection, DC reverse polarity protection and monitoring of the DC insulation impedance, ensure the safety of the inverter, battery and connected devices.Who is the Deye SUN-10K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forHomeowners who wish to increase their self-consumption and reduce their energy costsCommercial enterprises requiring a stable and efficient energy supplyOperators of existing solar installations who wish to upgrade their systems with a modern storage solutionSystems in regions with fluctuating grid stability, where diesel generators provide an additional source of power FAQs on the 10 kW Deye three-phase hybrid inverterIs the inverter suitable for outdoor use?Yes, with an IP65 protection rating, the SUN-10K-SG05LP3-EU-SM2 is dust- and splash-proof and therefore suitable for outdoor useHow is the system monitored and controlled?The intelligent monitoring platform allows parameters to be configured and firmware updates to be carried out remotely.Can the inverter be operated with a diesel generator?Yes, the Deye SUN-10K-SG05LP3-EU-SM2 supports the integration of diesel generators for additional supply reliability.Is the inverter suitable for retrofitting existing systems?Yes, thanks to AC coupling, the inverter can be easily integrated into existing solar systems.Can the inverter supply unbalanced loads?Yes, the inverter can handle an unbalanced load of up to 100 per cent, with each phase capable of delivering up to 50 per cent of the rated power. Contents: Deye SUN-10K-SG05LP3-EU-SM2 three-phase hybrid inverter 10 kW 1 x Deye SUN-10K-SG05LP3-EU-SM2 inverterA three-phase hybrid inverter with a 10 kW output, an integrated LCD touchscreen and support for 48V low-voltage batteries.1 x wall mount bracketA sturdy metal mounting rail for securely fixing the unit to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the internet, enabling remote monitoring via the Deye cloud or the Solarman app.3 x current transformers (CT)External fold-out current transformers for measuring energy flows at the property connection, required for net metering and optimising self-consumption.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (positive and negative) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter to the battery management system.1 x fitting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for the correct installation of the wall bracket.1 x User ManualA printed manual containing detailed installation instructions, circuit diagrams and safety instructions.

DEYSUN15KSG05LP3EUSM2
Deye SUN-15K-SG05LP3-EU-SM2 three-phase low-voltage hybrid inverter 15 kW

The Deye SUN-15K-SG05LP3-EU-SM2 is a high-performance three-phase hybrid inverter designed for demanding photovoltaic systems in both commercial and domestic settings. With a charging and discharging capacity of up to 350 A, support for various battery types and versatile applications, it represents a reliable solution for modern energy systems.Highlights at a glanceHigh performance: 15 kW rated power for medium to large PV systemsFlexible battery use: Compatible with 48 V lithium-ion and lead-acid batteriesHigh charging and discharging current: up to 280A for rapid energy storageParallel connection: up to 10 units can be operated, both on-grid and off-gridCompatible with diesel generators: support for external power sourcesEfficient energy conversion for modern requirementsThe Deye SUN-15K-SG05LP3-EU-SM2 enables a high self-consumption rate thanks to intelligent battery management, flexible PV feed-in and versatile communication interfaces. With a maximum efficiency of 97.6 per cent and an MPPT efficiency of over 99 per cent, the system operates extremely efficiently and is optimised for energy use.Flexible integration and retrofittingWhether as part of a new photovoltaic system or to expand existing systems, the SUN-15K is highly versatile thanks to AC coupling and parallel operation. Combining it with up to 10 inverters and various battery types enables scalable energy storage solutions and maximum system availability.Smart grid and off-grid system operationThe inverter supports operation on the public grid as well as self-sufficient off-grid operation. Integrated communication via RS485, CAN, Wi-Fi, GPRS or LAN (optional) allows for easy integration into monitoring and control systems. The protective functions and IP65 protection rating guarantee maximum operational safety.Who is the Deye SUN-15K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for:PV systems for commercial or domestic use with moderate energy requirementsSystems operated in parallel with the grid or off-gridProjects requiring maximum flexibility and reliabilityExisting systems to be modernised via AC coupling FAQs on the Deye SUN-15K-SG05LP3-EU-SM2Which battery systems are compatible?It supports low-voltage batteries with a voltage of 40–60 V, both lithium-ion and lead-acid. Communication takes place intelligently via BMS protocols. The maximum charging and discharging current is up to 280 A.How efficient is this inverter?The maximum efficiency is 97.6 %, whilst the EU efficiency rating is 97.0 %, which means very low losses.How many MPPTs and strings does it support?It has two MPPT trackers, each of which can be connected to up to two PV strings (2 strings per MPPT).Can I operate several devices in parallel?Yes, up to 10 units can be operated in parallel in on-grid or off-grid mode to flexibly scale system performance and capacity.What safety features are built in?It is rated to IP65 and is therefore protected against dust and water jets. It also features comprehensive protection functions against DC reverse polarity, overcurrent, overvoltage, short circuits, earth faults and arcing (‘AFCI’). Contents: Deye SUN-15K-SG05LP3-EU-SM2 three-phase hybrid inverter 15 kW 1 x Deye SUN-15K-SG05LP3-EU-SM2 inverterThe three-phase hybrid inverter with a 15 kW output, an integrated colour LCD touchscreen and support for 48V batteries.1 x wall mount bracketA sturdy metal rail for securely mounting the unit on a wall with sufficient load-bearing capacity.1 x Wi-Fi stick (data logger)A plug-in module for integrating the inverter into the local Wi-Fi network for monitoring via the Deye Cloud or the Solarman app.3 x current transformers (CT)Folding current transformers for measuring the energy flows at the property connection, which are necessary for functions such as zero-feed-in and optimising self-consumption.1 x set of PV connectors (MC4-compatible)The corresponding pairs of connectors (positive and negative) for connecting the photovoltaic strings to the DC inputs.1 x communication cable (BMS)A pre-assembled RJ45 cable for the data connection between the inverter and the storage system’s battery management system.1 x fitting kitIncludes the necessary stainless steel screws and heavy-duty wall plugs for the correct installation of the wall bracket.1 x User ManualA printed manual containing technical specifications, circuit diagrams, installation instructions and safety instructions.

DEYSUN12KSG05LP3EUSM2
Deye SUN-12K-SG05LP3-EU-SM2 Three-phase low-voltage hybrid inverter 12 kW

The Deye SUN-12K-SG05LP3-EU-SM2 is a three-phase hybrid inverter for residential and commercial energy projects. It combines an inverter, battery charger and energy management system in a single unit, enabling efficient, flexible energy flow control in new installations and retrofits.Highlights at a glanceSupports both lead-acid and lithium-ion batteries for a wide range of storage optionsBattery voltage range from 40 to 60 volts for flexible applicationsMaximum charging and discharging current of 240 amps for rapid energy absorption and releaseMaximum PV input power of 18,000 watts enables high-performance solar systemsTwo independent MPPT inputs for maximum energy yield, even with different module orientationsUnbalanced output power with up to 50 per cent of the rated power per phase for flexible load distributionEfficient energy conversion for modern requirementsThe Deye SUN-12K-SG05LP3-EU-SM2 achieves a maximum efficiency of 97.6 per cent and boasts an MPPT efficiency of over 99 per cent. The wide MPPT voltage range of 200 to 650 volts, combined with a maximum PV input voltage of 800 volts, ensures efficient energy harvesting even under varying irradiance conditions. This high efficiency ensures cost-effective operation and maximum yields from the solar installation.Flexibility and scalabilityThe Deye SUN-12K-SG05LP3-EU-SM2 can be flexibly adapted to different requirements. Thanks to the ability to operate up to ten units in parallel, it is suitable for both smaller systems and large-scale energy projects. AC coupling allows for straightforward integration into existing systems, making the inverter ideally suited for retrofitting. Support for various battery types enables bespoke storage solutions, tailored to individual needs and budgets.Reliability and protectionWith an IP65 protection rating, the inverter is optimally protected against dust and water and is suitable for demanding environmental conditions. The wide operating temperature range of minus 40 to plus 60 degrees Celsius ensures reliable operation even under extreme climatic conditions. Comprehensive protection mechanisms, such as overcurrent, overvoltage, short-circuit and thermal protection, as well as monitoring of the DC insulation impedance, ensure maximum operational reliability and a long service life for the system.Who is the Deye SUN-12K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forHomeowners who wish to increase their self-consumption rate and reduce their energy costsCommercial enterprises requiring a stable and efficient power supplyUsers who wish to upgrade existing solar installations with modern storage solutionsProjects in regions with fluctuating grid stability, where diesel generators are used as an additional power source FAQs on the 10 kW Deye Hybrid InverterWhich battery types does the inverter support?The inverter is compatible with lead-acid and lithium-ion batteries within a voltage range of 40 to 60 volts.What is the maximum charging and discharging current?The maximum charging and discharging current is 240 amperes, which enables rapid energy transfer.Can the inverter be operated with a diesel generator?Yes, the Deye SUN-12K-SG05LP3-EU-SM2 supports the integration of diesel generators to ensure a safe and uninterrupted power supply.Which communication interfaces are available?The inverter offers interfaces such as RS485, RS232 and CAN, as well as options for GPRS, Wi-Fi, Bluetooth, 4G and LAN for monitoring and control.Can the inverter supply unbalanced loads?Yes, the inverter can supply an unbalanced load of up to 100 per cent, with each phase capable of delivering up to 50 per cent of the rated power. Contents: Deye SUN-12K-SG05LP3-EU-SM2 three-phase hybrid inverter 12 kW 1 x Deye SUN-12K-SG04LP3-EU-SM2 inverterA three-phase hybrid inverter with a 12 kW output, an integrated LCD touchscreen and support for 48V low-voltage battery systems.1 x wall mount bracketA sturdy metal mounting rail for securely fixing the unit to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the internet, enabling remote monitoring via the Deye cloud or the Solarman app.3 x current transformers (CT)External fold-out current transformers for measuring energy flows at the property connection, required for net metering and optimising self-consumption.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (positive and negative) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter to the battery management system.1 x fitting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for the correct installation of the wall bracket.1 x User ManualA printed manual containing detailed installation instructions, circuit diagrams and safety instructions.

DEYSUN-EVSE11K01-EU-AC
Deye WALLBOX SUN-EVSE11K01-EU-AC 11 kW Smart EV Charger

The Deye SUN-EVSE11K01-EU is a smart 11 kW wallbox for the safe, fast and efficient charging of electric vehicles in both domestic and commercial settings. Thanks to its three-phase connection with a charging power of up to 11 kW, it charges compatible electric and plug-in hybrid vehicles significantly faster than a standard domestic socket.Thanks to smart control options, integrated communication interfaces and comprehensive safety features, the Deye SUN-EVSE11K01-EU can be flexibly integrated into a modern energy management system. When used in conjunction with compatible Deye inverters, the wallbox can also be used for surplus PV charging, allowing self-generated solar power to be specifically used to charge the vehicle.The key benefits at a glanceHigh charging powerWith a charging power of up to 11 kW when connected to a three-phase supply, the Wallbox charges a compatible electric vehicle much faster than a standard domestic socket.Smart controlCharging processes can be conveniently monitored and controlled via the app. In addition, the wallbox supports authentication via RFID card as well as straightforward plug-and-play operation.Weatherproof and robust designThe housing, with an IP65 protection rating, is protected against dust and water jets. The IK10 impact resistance provides additional protection against mechanical impacts and ensures reliable operation in garages, carports and suitable outdoor areas.Comprehensive safety featuresThe integrated residual current detection for 30 mA AC and 6 mA DC, as well as protection functions against overvoltage, undervoltage, overload, short circuit and overheating, ensure safe charging operation. In accordance with the specified product characteristics, no external Type B residual current circuit breaker is required.Smart charging and solar optimisationThe Deye SUN-EVSE11K01-EU is more than just a standard charging point. It can be used as a smart component of a modern energy system and helps to increase the self-consumption of self-generated solar power. When used in conjunction with compatible Deye inverters, the wallbox supports surplus PV charging. This means the electric vehicle is charged primarily using the solar energy currently available.The wallbox can be integrated into the home network and compatible energy management systems via the built-in Wi-Fi, Bluetooth and RS485 interfaces. Charging times can be scheduled so that the vehicle is charged, for example, when solar power generation is high or during off-peak tariff periods. Control and monitoring are carried out via the Solarman or Deye cloud application.Flexible installation and operationThe wallbox can be mounted directly on a wall or, alternatively, on a suitable freestanding column. The integrated 5-metre Type 2 charging cable allows direct connection to numerous electric and plug-in hybrid vehicles commonly found in Europe. The compact housing and intuitive operation facilitate integration into both domestic and commercial charging environments.Contents of the package1x Deye SUN-EVSE11K01-EU wallbox, 11 kW1x integrated Type 2 charging cable, 5 m long1x wall bracket including fixing materials with screws and wall plugs1x User Manual and Installation Guide