Yuasa Lead-acid battery with 6V and 1.2Ah - NP1.2-6

The Vision CP1290F2 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 9 Ah capacity. This highly versatile and reliable general-purpose battery has been designed for long service life in standby operation as well as light cyclic requirements. Equipped with maintenance-free AGM technology and wide 6.35 mm terminals, this battery provides safe and consistent power for a wide range of applications, from backup power in UPS systems to safety-critical alarm systems.Highlights at a glanceHigh capacity: 9 Ah at 12 V for reliable energy supply in standard applications.Long service life: Designed for a service life of up to 5 years in standby operation (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination eliminates the need for maintenance.Compact design: Fits most common installation spaces for batteries in this power class, often as an upgrade for 7Ah models.Flexible installation: Can be operated in any position, except for permanent upside-down use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-relevant devices.Powerful performance for a variety of applicationsThe Vision CP1290F2 delivers a nominal capacity of 9 Ah with a 20-hour discharge. It is optimised as a general-purpose battery for standby parallel operation, but is equally suitable for applications with occasional charge and discharge cycles. Its range of applications extends from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), where the electrolyte is completely bound in a glass fibre mat, the CP1290F2 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3 % per month means it can be stored for a long time while remaining highly ready for use. The durable ABS plastic casing provides excellent protection against shocks and vibration.Features  ModelVision CP1290F2 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)9 (at 20h rate) Maximum discharge current135A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 100 Weight (kg)approx. 2.5 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL  FAQs about the Vision CP1290F2 lead-acid batteryFor which applications is the CP1290F2 suitable?The battery is ideally suited for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical equipmentModel building and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is necessary and it is protected against leakage.Can I use this 9Ah battery as a replacement for a 7Ah battery?In many cases yes. The CP1290F2 often has the same dimensions as a standard 7Ah battery. If your device has enough space, you can use this battery as an upgrade for longer standby time. Please check the dimensions beforehand and make sure that your charger is suitable for the higher capacity.Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1290F2 is a very common replacement battery. Please compare the voltage (12V), capacity (9Ah), dimensions, and especially the connector type (Faston 6.35 mm) with your old battery before purchasing to ensure compatibility.What are the charging parameters for this battery?Trickle charge (float): The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charging: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.7 A in order to maximise the battery's service life.What does the Faston 250 connector mean?Faston 250 refers to the type of connector. These are flat plug connectors with a width of 6.35 mm (0.250 inch). Cables with suitable cable lugs are simply plugged onto these contacts, allowing quick and tool-free installation. 

The Ultralife U9VLJP10 is the economical bulk package (bulk pack) of the proven U9VL-J-P 9V lithium battery. This set contains 10 pieces of high-performance batteries, mostly in space-saving foil packaging instead of individual plastic blisters. This variant is aimed specifically at professional users, janitorial services, hoteliers and installers who need to service a large number of smoke detectors, security sensors or medical devices at the same time. Technically, the cell is identical to the retail version: it offers up to 10 years of service life and maximum reliability.Highlights at a glanceValue pack (10 pieces): Supplied as a 10-unit package (often foil-wrapped or in an industrial carton), which reduces the price per battery compared to individual blister packs and reduces packaging waste – ideal for large projects.The smoke detector standard: Enables up to 10 years maintenance-free operation in compatible smoke detectors, which drastically minimises maintenance effort in rental properties and commercial premises.High energy density: With 1200 mAh, it offers huge reserves for long-term use and lasts up to 5 times longer than conventional 9V alkaline batteries.Long shelf life: Thanks to the very low self-discharge, you can easily store this 10-pack for up to 10 years without the batteries losing significant performance.Wide range of applications: Works reliably at temperatures from -20°C to +60°C, making it the first choice for unheated warehouses, attics or garages.Safety construction: The housing is robust and leak-proof; the lithium manganese dioxide chemistry is non-toxic and contains no cadmium, mercury or lead.The solution for facility management & large installationsThe U9VLJP10 is the standard choice when entire buildings need to be equipped with new batteries. Whether during the annual replacement in hospitals (pagers, monitors), in hotels (electronic door locks, safes) or in apartment buildings (smoke detectors): The bulk pack saves time when unpacking and is kind to the budget. Features ModelUltralife U9VLJP10 (industrial pack / foil) ApplicationLarge scale users, facility management, OEM (less waste) TechnologyLithium manganese dioxide (Li-MnO2) - primary cell Voltage9 V (Nominal) Capacity1200 mAh (constant to end of life) Packaging unit10 pieces shrink-wrapped in foil (bulk) Dimensions (L x W x H in mm)48.5 x 26.5 x 17.5 (standard 9V block) Shelf life10 years (ideal for long-term smoke detectors) Temperature range-20°C to +60°C Special featuresCost-efficient bulk package, more environmentally friendly (less plastic) Weight (g)approx. 37 (per battery)  FAQs about the Ultralife U9VLJP10What is the difference to the U9VLJP-BP?There is no technical difference in the battery itself. BP = Blister Pack (individually packaged for retail sale). 10 (or FP) = Foil Pack / Bulk (10 pieces packed together for industry). The U9VLJP10 is more environmentally friendly (less plastic waste) and usually cheaper per item.Is "round cell" the correct term?Your enquiry mentioned "round cell", which is a common misunderstanding. The U9VL is a 9V block (rectangular, prismatic). Internally, it consists of three flat cells (not round cells), but the design is the classic "E-block". Ultralife also manufactures real round cells (like the ER14505 AA), but the designation U9VL always refers to the 9V block.What happens if I store the batteries?Almost nothing. That is the great advantage of lithium. You can buy this 10-pack, take out 2 batteries and put the remaining 8 in a cupboard for 8 years. If you need the remaining 8 batteries then, they will still have almost 100% of their charge. Store them ideally in a cool, dry place.Are the batteries packed short-circuit-proof?As a rule, the batteries in the pack of 10 are supplied so that the terminals cannot touch each other (e.g. by a plastic cap on each battery or a tightly fitting foil). Important: If you open the pack and put loose batteries in a drawer, be sure to tape the terminals or leave the protective cap on. If two 9V blocks touch at the terminals, a short circuit immediately occurs (fire hazard!).

The XCELL XP1.2-12 is a compact 12-volt AGM lead-acid battery with a nominal capacity of 1.2 Ah. It reliably supplies energy in safety-related devices and industrial applications, impresses with easy integration and defined charging parameters for standby and cyclic operation.Highlights at a glanceCompact and lightweight: 97 x 43 x 58 mm at approx. 0.54 kgVdS approved: G 114095 for safety applicationsMaintenance-free thanks to AGM technology and valve-regulated constructionClear charging windows: Float 13.60 to 13.80 V, Cycle 14.50 to 14.90 VSolid power reserve: up to 18 A discharge current for 5 secondsUse and PerformanceThe XP1.2-12 is designed for alarm and security technology, emergency lighting, communication and measuring devices as well as small control units. The internal impedance of approx. 90 mΩ supports stable voltage supply, even during short load peaks. The permissible discharge range from −15 °C to +50 °C enables operation in different environments.Efficiency and Service LifeIn float operation, an expected service life of 3 to 5 years at 20 °C is envisaged. The self-discharge is low: at 25 °C approx. 91 percent capacity remains after 3 months, 82 percent after 6 months and 65 percent after 12 months of storage. This means the battery remains reliably available even after idle periods.Installation and Charging RecommendationsThe battery has T1 terminals for quick, secure installation. For standby operation, a charging voltage of 13.60 to 13.80 V at 25 °C with temperature compensation of −18 mV per °C is recommended. In cyclic operation, 14.50 to 14.90 V at 25 °C with −30 mV per °C compensation applies. The maximum charging current is 0.36 A.Features  ModelXCELL XP1.2-12 VdS Battery typeVRLA AGM (safety technology) Nominal voltage (V)12 Capacity (Ah)1.2 (at 20h rate) Maximum discharge current18A (for 5 seconds) Charging voltage (standby charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)97 x 43 x 58 Weight (kg)approx. 0.57 ConnectionFaston 187 (4.8 mm) CertificationsVdS, ISO9001, CE, UL  FAQs about the XCELL XP1.2-12What is the expected service life of the XP1.2-12 in standby operation?At 20 °C, 3 to 5 years in float operation is envisaged. Regular functional checks and appropriate charging voltage increase availability.For which applications is the XP1.2-12 battery suitable?Preferred for alarm and signalling systems, emergency lighting, communication and measuring devices as well as compact controllers with 12-volt supply.Which charging voltages should be used?In float charge operation, the voltage should be between 13.60 V and 13.80 V at 25 °C. In cyclic operation, the recommended voltage range is 14.50 V to 14.90 V. Please note the temperature compensation.What is the self-discharge rate?At 25 °C, approx. 91 percent of the capacity remains after 3 months, approx. 82 percent after 6 months, and approx. 65 percent after 12 months storage.Which terminals are present on the battery?T1 flat plug terminals for quick integration into devices and assemblies.Which VdS approval does the battery have and is it system-bound?The battery is VdS-approved under number G114095 and the approval is not system-bound.