Skip to main content Skip to search Skip to main navigation
Menu
Description

Product information

The Solar extension cable set (1 metre, 6mm²) is the compact high-performance solution for photovoltaic projects where maximum efficiency is required in the smallest of spaces. If you only need to bridge short distances – for example, between closely spaced modules or directly to the microinverter of a balcony power station – this large cross-section ensures there is no loss of power, even at peak currents.

The set contains two high-quality, double-insulated solar cables: one red cable for the positive terminal (+) and one black cable for the negative terminal (–). Both ends are professionally pre-assembled with MC4-compatible connectors and sockets. Thanks to the generous cross-section of 6mm², this set is extremely future-proof and ideal for modern high-performance modules with very high output currents.

Highlights at a glance

  • Maximum efficiency: The 6mm² cross-section minimises electrical resistance to an absolute minimum, which is especially beneficial for high currents.
  • Plug & Play installation: The cables are factory-fitted on both sides with MC4-compatible plugs, so no special crimping tools are required.
  • Secure identification: The clear colour coding in red (+) and black (–) effectively prevents a polarity reversal when connecting.
  • Weatherproof & Durable: The special sheath made from cross-linked polyolefin is UV-resistant, ozone-resistant, and can withstand extremely low and high temperatures from –40°C to +90°C.
  • Protection class IP67: When mated, the connectors are absolutely dust-tight and protected against splashing water and rain.
  • High-quality conductor: Tinned electrolytic copper provides excellent corrosion resistance and permanently high conductivity.

Areas of application

This 1-metre extension is optimised for specific short-range scenarios:

  • Module connection (string)
    • Bridging short distances between two solar modules if the factory-installed cables are just too short for the selected mounting position.
  • Balcony power stations
    • Direct connection from the module to the microinverter if the latter is attached directly behind the panel on the mounting frame.
  • Compact stand-alone systems
    • Connecting small charge controllers in camper vans or boats, where the components are installed in confined spaces.

Assembly & safety information

  • No measurable voltage drop
    • At a length of only 1 metre, the voltage loss is practically zero, even in 12V systems. This makes the cable the ideal choice for perfectionists who want to make use of every last bit of energy.
  • Observe bend radius
    • Despite the high flexibility of the finely stranded conductors, you should not bend the 6mm² cable too sharply, to avoid mechanically stressing the insulation and the connectors.
  • Correct latching
    • When connecting, make sure the MC4 connectors clearly click into place. This is the only way to ensure the connection is permanently waterproof and safe from arcing.
 

Features

ModelSolar extension cable set (1m / 6mm²)
Conductor cross-section**6.0 mm²**
Cable length**1.0 metre** (per colour)
Rated voltageUp to 1500 V DC
Connector type**MC4 compatible** (IP67)
Conductor materialCopper, tinned (finely stranded)
Temperature range-40°C to +120°C (on conductor)
CertificationTÜV / EN 50618 (H1Z2Z2-K)
Special featureVery low resistance & UV-resistant
 


FAQs on the solar extension cable 1m

Isn't 6mm² oversized for just 1 metre in length?

Technically yes, but it never hurts. While 4mm² is usually sufficient at this length, 6mm² offers greater mechanical robustness and is already ideal for future module generations with currents above 15A.

Will this cable fit my inverter from Hoymiles or Deye?

Yes. The connectors used comply with the MC4 standard, which is used worldwide in almost all solar modules and microinverters. They fit perfectly both mechanically and electrically.

Can I connect two of these 1m cables in series?

Yes, that is possible. The cables can be cascaded as needed. Please note, however, that each connector represents a tiny contact resistance. For short overall distances, however, this is negligible.
Properties
Cross-section of the conductor: 6.00 mm²
Reviews 0

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

Customers also bought

DEYSE-F5-Pro-C
Deye SE-F5 Pro-C – Advanced LiFePO4 storage – 51.2V / 5.12 kWh

The Deye SE-F5 Pro-C is a state-of-the-art 5.12 kWh battery storage module Based on safe lithium iron phosphate (LiFePO4) technology. As part of the ‘Pro’ series, this 51.2V low-voltage battery has been specially developed for seamless integration with Deye hybrid inverters and other common 48V systems.The storage unit is characterised by its high energy density, which cobalt-free chemicals and the intelligent battery management system (BMS). The SE-F5 Pro-C is the ideal solution for homes and commercial applications requiring reliable optimisation of self-consumption (solar) or a robust emergency power supply. Thanks to its modular design, the capacity can be flexibly expanded from 5 kWh up to the high double-digit kWh range.Highlights at a glanceSafest cell chemistry (LiFePO4): Uses lithium iron phosphate, which is extremely thermally stable, non-flammable and is considered the safest lithium technology on the market.High capacity (5.12 kWh): Delivers 100 Ah at a nominal voltage of 51.2 V in a compact housing, ideal for long runtimes.Long service life (6,000+ cycles): Designed for over 6,000 charge/discharge cycles (at 25°C, 90% DOD), which corresponds to a service life of well over 10–15 years.Intelligent BMS: The integrated battery management system protects against overcharging, deep discharge, overcurrent and overtemperature, and ensures active cell balancing.Environmentally friendly (cobalt-free): The battery contains absolutely no toxic cobalt, which minimises the environmental impact during both manufacture and disposal.Flexible scalability: Supports the parallel connection of up to 32 units (up to 64 in some cases, depending on the module) to achieve storage capacities of over 160 kWh.Easy installation: Thanks to its standard 19-inch dimensions, the module is perfectly suited for rack systems or wall mounting (with suitable brackets).Deye-Compatibility: Perfectly matched to Deye hybrid inverters (automatic detection via CAN bus), but also compatible with Victron, Growatt, SMA etc. (depending on the protocol).Areas of applicationThe Deye SE-F5 Pro-C is highly versatile:Optimising self-consumption: Storage of surplus PV electricity for use at night.Emergency power systems (back-up): A reliable power source in the event of a mains power failure.Peak Shaving: Peak load shedding in commercial premises.Off-grid systems: Off-grid systems.Technology & BenefitsThe SE-F5 Pro-C stands out thanks to the following technical features:LFP technology: Unlike NMC batteries, LiFePO4 does not tend to experience ‘thermal runaway’ if damaged. This makes installation in the home particularly safe.Smart Communication: The BMS actively communicates with the inverter. It reports state of charge (SOC), state of health (SOH) and temperature in real time, enabling the inverter to dynamically adjust the charging curve.Soft start: Integrated pre-charge resistors prevent high inrush currents that could blow fuses when the battery is switched on. Installation & Operating InstructionsCabling: Standard battery cables (often 25mm² or 35mm²) with Amphenol or M-type screw terminals (check depending on the model!) are required for connection to the inverter. The communication cable (RJ45, CAN bus) is essential for the warranty.Addressing: When connected in parallel, the batteries often need to be addressed via DIP switches (master/slave configuration), with the master handling communication with the inverter.Temperature: Lithium batteries should not be charged at temperatures below 0°C. The BMS stops charging in freezing conditions to protect the cells. Ideal operating range: 15°C to 30°C. FAQs for the Deye SE-F5 Pro-CDoes this battery also work with other inverters?Yes. Deye Uses standard protocols ( Deye, etc.). The battery is compatible with many 48V low-voltage inverters, provided the relevant protocol is selected in the BMS or inverter. However, it offers the best performance within the ecosystem. It is strongly recommended that you check the compatibility list beforehand.What is the difference compared to the SE-G5.1 Pro?The designations (Pro, Pro-C, Pro-B) often refer to revisions in the casing design, chip availability or certifications (e.g. UL certificates for specific markets). The core technical specifications (5.12 kWh, LFP) are usually identical. The ‘C’ version is often the latest variant, optimised for the European market.Can I upgrade the battery later?Yes, no problem. You can connect additional modules in parallel at any time to increase capacity. The BMS compensates to a certain extent for differences in charge between new and old modules. However, it is recommended that you combine modules with a similar degree of ageing or carry out a one-off full balancing of the system. Deye: SE-F5 Pro-C (5.12 kWh)This product is a set comprising the inverter unit and the separate battery modules.1 x Deye SE-F5 Pro-C battery moduleThe main unit with a capacity of 5.12 kWh, an integrated battery management system (BMS) and an LCD display for status indication.1 x wall bracket (Mounting Bracket)A mounting plate that is fixed to the wall to securely mount the battery module.1 x set of battery connection cablesUsually includes a negative battery cable and the positive connector (or a pair of cables) for connection to the inverter.1 x RJ45 communication cableRequired for the data connection between the battery (PCS port) and the hybrid inverter.1 x earthing cable (Grounding Cable)A yellow-green cable for the correct connection of the protective conductor to the housing.1 x set of mounting hardwareConsisting of expansion plugs (usually M6x100), screws (M4) and hexagon head screws for fixing to the bracket.4 x stacking bracketsSpecial brackets required when several modules are to be stacked on top of one another on the floor rather than mounted on the wall.1 x positioning template (Positioning Paperboard)A cardboard template for accurately marking the drill holes for the wall bracket.1 x User ManualTechnical manual with installation instructions and safety guidelines.

DEYDL100B-WIFI
Deye DL100B-WIFI data logger

The Deye DL1000B-WIFI is the compact Wi-Fi data logger for all owners of an Deye inverter who wish to monitor their photovoltaic system conveniently from a distance. With data updated every minute and seamless integration with the Deye cloud, you can keep an eye on solar generation, battery status and grid consumption at all times – directly via the app or web portal.Key benefits for your systemComprehensive monitoringThe Deye data logger records inverter data at 1-minute intervals and automatically fills in any missing data points following connection failures.Flexible connectivity2.4 GHz Wi-Fi enables a continuous cloud connection, whilst Bluetooth BLE 5.3 ensures quick initial setup without the need for a Wi-Fi password.Remote OTA updatesFirmware updates for loggers and inverters are carried out via the cloud. A visit from a technician is not required.Robust constructionThe IP65 protection rating and an operating temperature range of -40 °C to +65 °C ensure reliable operation under a wide variety of conditions.Convenient remote monitoring of your photovoltaic systemWith the Deye DL1000B-WIFI data logger, your photovoltaic system becomes a smart energy hub. Via the Deye Cloud app for iOS and Android or the web portal, you can view the current status of your inverter at any time, check solar generation and receive system alerts directly on your smartphone. Multiple inverters can also be managed in parallel via a single account – ideal for larger systems or installers.Should a fault ever occur, remote diagnostics enable the Deye service team to quickly read out error codes and, if necessary, directly adjust the inverter parameters. Thanks to MODBUS command transmission and plug-and-play commissioning, the logger integrates seamlessly into your existing system. This saves you time, avoids unnecessary on-site visits and ensures reliable self-consumption of your solar power.Contents of the packageDeye DL1000B-WIFI data loggerDPI communication board (model-specific)Data cableInstallation instructions

AIKONEO-PRO3S-485W-FB
AIKO Neostar Pro 3S+54 485W Glass-Glass Full Black

The AIKO Neostar Pro 3S+ 54 glass-glass Full Black module with 485 W is a highly efficient solar module for demanding domestic and commercial photovoltaic systems. Featuring state-of-the-art N-type ABC cell technology, a robust double-glass construction and an elegant full-black design, this module combines high performance, exceptional durability and long-term yield reliability at a particularly high standard.Performance and technologyAIKO AIKO’s Neostar Pro 3S+ 54 achieves a maximum power output of 485 W with a module efficiency of 24,3 %. The innovative N-type ABC cell technology ensures higher energy yields, optimised performance under partial shading and an improved temperature coefficient. In addition, the double-glass construction supports its use in modern PV systems with high demands on efficiency and design.Robust construction and high reliabilityThe module is constructed as a double-glazed version with 2.0 + 2.0 mm coated, semi-tempered glass and features a black anodised aluminium frame. This design ensures high mechanical stability and a long service life. The module is resistant to micro-cracking, has an IP68 junction box with three bypass diodes and is designed to withstand high mechanical stresses in demanding outdoor applications.Long-term yield securityAIKO offers a 30-year product warranty on the Neostar Pro 3S+ 54, as well as a 30-year linear power warranty. Degradation in the first year is a maximum of 1 %; from the second year onwards, it is a maximum of 0,35 % per year. This means the module is designed to deliver stable solar yields over the long term and offer a high level of investment security.ApplicationsThe AIKO Neostar Pro 3S+ 54 with 485 W is ideal for private rooftop systems, high-quality home projects and commercial installations where high module power, modern design and long-term reliability are required. Thanks to its compact dimensions and high efficiency, it is particularly well-suited to areas where the aim is to achieve as much power as possible per module.Contents of delivery1 x AIKO Neostar Pro 3S+ 54 glass-glass Full Black module AIKO-A485-MCE54Db with 485 W