Solar extension cable 20m 6mm² - red/black for reliable PV applications (set)

The Mounting Systems centre clamp is an indispensable connecting element for the secure fixing of solar modules to substructures. This special version is designed as a universal clamp and covers module frame heights from 30 to 40 mm. In the version "sw" (black) it is the perfect optical complement for modern full-black modules and black anodised rail systems.The clamp is supplied including the EC component (Easy Click), which significantly shortens assembly time. Thanks to the click mechanism, the clamp can be engaged at any position on the mounting rail from above, without the need to laboriously slide it in from the side.Highlights at a glanceUniversal clamping range: Flexibly applicable for solar modules with a frame thickness between 30 mm and 40 mm.Easy Click (EC) technology: Quick and easy one-handed installation by direct engagement into the groove of the mounting rail.Aesthetic design: The black anodisation ensures a homogeneous appearance when using black module frames.High material quality: Manufactured from weather-resistant aluminium and stainless steel for maximum durability.Secure hold: Ensures permanent and vibration-resistant fixing of the modules to the substructure, even under high wind and snow loads.Pre-assembled set: The clamp is supplied ready for installation, including screw and the special click block.Areas of applicationThe centre clamp is used to fasten two adjacent modules:Photovoltaic rooftop systemsUse on pitched roofs in combination with Mounting Systems standard aluminium profiles.Free-field & flat roof systemsWherever modules are mounted in rows side by side and a clamping distance between the modules is required.Visually sophisticated projectsEspecially for systems where a continuous black look (full black) without silver accents is desired.Installation & safety instructionsPositioningThe centre clamp is placed between two solar modules. Make sure that both module frames are flush with the clamp before you tighten the screw.Tightening torqueObserve the tightening torque specified by the manufacturer (usually approx. 8–10 Nm) to ensure secure fastening without damaging the module frame.End of rowPlease note that centre clamps are only intended for connecting two modules. For the outer end of a module row, you need the appropriate end clamps. Properties  CategoryCentre clamp set Clamping range (frame height)30 – 40 mm Clamp materialAluminium (anodised) Colour / FinishBlack (sw / black) Area of applicationCentre fastening between two modules CompatibilityStandard mounting rails (Mounting Systems) Weather resistanceUV-resistant and corrosion-resistant FAQs on the Mounting Systems centre clampDoes this clamp fit all mounting rails?Optimised for Mounting Systems.The clamp is specially developed for the groove geometry of Mounting Systems profiles. For third-party rails, it should be checked in advance whether the click block (EC) engages securely.Why is the clamp specified for a range (30-40mm)?Due to the integrated spring/adjustment.The clamp is designed so that it adapts variably to the frame height when tightened. This saves storage capacity and increases flexibility on the construction site.Is the black colour scratch-resistant?Conditionally.The black anodised layer is very robust and weather-resistant. Care should still be taken when assembling with tools to avoid mechanical scratches in the colour layer.How many clamps do I need per module?Usually 4 fixing points.Two centre clamps (top and bottom) are required per module transition. For a row: (number of modules - 1) x 2 centre clamps.

The JA Solar JAM54D40 455/LB bifacial solar module is part of the Deep Blue 4.0 Pro series and has been developed for maximum energy yield, long service life and high efficiency. With the latest n-type technology, bifacial design and double-sided glass structure, the module is ideal for demanding private and commercial photovoltaic systems.Highlights at a glancePowerful: 455 W rated power with up to 22.6% module efficiencyBifacial energy yield: Rear side efficiency up to 80% (±5%)High reliability: Over 6,000 charge cycles at 70% EOL powerLow degradation: Only 0.4% power loss per year over 30 yearsRobust design: Double glass module with 1.6 mm glass thickness front and rearDurable: 25 years product warranty, 30 years performance guaranteeState-of-the-art n-type cell technologyThe module is based on n-type Bycium++ cell technology with 16 busbars (MBB half-cell). This reduces the power loss caused by light-induced degradation (LID) and ensures better performance in low light conditions as well as a higher overall energy yield.High performance under real conditionsThe JAM54D40 455/LB delivers strong performance not only under standard test conditions, but also at high ambient temperatures, low irradiation and when used bifacially. The bifacial rear-side absorption can achieve an additional yield of up to 30% with optimum installation.Robust construction for high loadsThe module is designed for a maximum static front load of 5400 Pa and a back load of 2400 Pa. The junction box is IP68 rated, ensuring a safe operation under a wide range of weather conditions. Suitable for applications from -40 °C to +85 °C.   Electrical parameters at STC Maximum rated power (Pmax) (W)455 Open-circuit voltage (Voc) (V)39.50 Maximum power voltage (Vmp) (V)33.00 Short-circuit current (Isc) (A)14.56 Maximum power current (Imp) (A)13.79 Module efficiency (%)22.8 Operating conditions Maximum system voltage1500V DC Operating temperature–40°C ... +85°C Maximum rated power of series fuse30A General data Dimensions (W / H / D)1762/1134/30mm Weight22 kg   Who is the JA Solar JAM54D40 455/LB suitable for?Installers and system planners focusing on performance and durabilityOperators of rooftop systems wanting to benefit from additional bifacial yieldCustomers looking for a visually appealing full black solution with high energy yieldProjects with demands for low degradation and high environmental resilienceFrequently asked questions (FAQ) about the JA Solar JAM54D40 455/LBWhat does "bifacial" mean for this module?The module uses bifacial cells that are light-sensitive on both the front and rear sides. This means that reflected light from the rear side can also be converted into electricity, which can increase energy yield by up to 30 percent depending on the installation environment.What is the difference between n-type and p-type cells?n-type cells, as in the JAM54D40 455/LB, have higher efficiency, lower light-induced degradation (LID) and better low-light performance compared to conventional p-type cells.How large is the module and how much does it weigh?The module measures 1134 × 1762 × 30 mm and weighs 22 kg. It features a double glass design with 1.6 mm glass thickness on the front and rear sides.How long is the warranty?JA Solar offers 25 years product warranty and 30 years linear performance guarantee with a maximum annual degradation of only 0.4 percent.Is the module suitable for use in extreme climate zones?Yes, the module is designed for operating temperatures from -40 °C to +85 °C and can withstand a front load of up to 5400 Pa and a back load of up to 2400 Pa. The junction box is rated to IP68.Which inverters is the module compatible with?The module is compatible with all standard inverters designed for a system voltage of up to 1500V DC. The junction boxes are equipped with MC4-EVO2 connectors.What is the best way to install the module?The module is suitable for both rooftop and ground-mounted systems. It can be installed in landscape or portrait format. The cable length is adapted to the orientation in each case.How robust is the module against environmental influences?Thanks to its glass-glass design and black aluminium frame, the module withstands extreme loads, designed for snow loads up to 5,400 Pa and wind loads up to 2,400 Pa. The rear foil and robust frame construction provide reliable protection against moisture and environmental influences.