Deye SE-F16-C – Advanced energy storage system with 16 kWh (LiFePO4)
Product information
The Deye SE-F16 is a high-capacity low-voltage energy storage system (51.2 V) designed for demanding use in residential and commercial photovoltaic systems. With an enormous rated capacity of 16 kWh (314 Ah) in just one compact housing module, this storage system significantly minimises the space required and the installation effort.
This model uses the proven and intrinsically safe lithium iron phosphate (LiFePO4) cell chemistry. Combined with the intelligent Battery Management System (BMS) and a wide range of monitoring options (including Bluetooth), the SE-F16 offers maximum safety, scalability and longevity for the self-sufficient energy supply of your home or business.
Highlights at a glance
- Massive storage capacity (16 kWh): With a rated capacity of 314 Ah at 51.2 V, this single module provides enough energy to reliably supply large households even during prolonged periods of low sunlight.
- Safe LiFePO4 cell chemistry: The lithium iron phosphate technology guarantees maximum thermal stability and virtually eliminates the risk of thermal runaway (fire hazard).
- Powerful power handling: The system supports an enormous continuous discharge current of up to 230 A and peak currents of 280 A (for 10 seconds), ideal for power-hungry large loads such as heat pumps or wallboxes.
- Extreme scalability: For even greater energy requirements, up to 32 units can be connected in parallel as standard. With a CAN bridge, scaling up to 64 modules is even possible.
- Smart monitoring & connectivity: In addition to CAN2.0 and RS485, the storage system features Bluetooth for convenient monitoring via smartphone app. The "C" version (SE-F16-C) also has an integrated LCD display.
- Longevity & efficiency: Certified for over 6,000 charge cycles (at 25°C), ensuring decades of reliable operating life in daily use.
- Flexible installation: Despite the high weight, the housing system is extremely flexible and can be installed either on the wall, floor-standing or stacked.
Applications
The Deye SE-F16 is the perfect solution for demanding energy scenarios:
- Single-family and multi-family houses: Maximises self-consumption of PV power and, in combination with a hybrid inverter, provides a powerful emergency power supply for the entire building.
- Commercial applications (C&I): Used to cap expensive peak loads (peak shaving) and stores large PV surpluses in agricultural or commercial businesses.
- Off-grid & stand-alone systems: Thanks to its gigantic capacity and high continuous discharge power, it offers a reliable energy source for completely off-grid properties.
Installation & safety instructions
- Logistics and weight: At a weight of 109 kg, the module is extremely heavy. Installation should обязательно be carried out with suitable lifting equipment (stair climber) or by at least two to three people.
- Choice of location: The storage system must be installed in a dry and ideally frost-free room (protection class IP21). Charging at temperatures below 0°C is automatically blocked by the BMS to protect the cells.
- Cable cross-sections: Due to the extremely high currents (up to 230 A continuous load), the connection cables to the inverter or busbar must have a cross-section of at least 70 mm², preferably 95 mm², in order to avoid overheating and voltage losses.
- Commissioning with parallel connection: If you connect several SE-F16 modules together, all units must be charged to exactly the same voltage level before cabling in order to prevent dangerous equalisation currents.
Features
| Model | Deye SE-F16 (C series with display) |
| Technology | **LiFePO4** (lithium iron phosphate) |
| Rated voltage | **51.2 V** (operating range: 44.8 V - 57.6 V) |
| Rated capacity | **314 Ah** |
| Nominal energy | **16.0 kWh** |
| Max. continuous current | **230 A** (peak current 280 A for 10s) |
| Cycle life | **≥ 6000 cycles** (at 90% DOD and 25°C) |
| Communication | CAN 2.0 / RS485 / Bluetooth + app (incl. LCD display) |
| Dimensions (W x D x H) | approx. 400 x 233 x 708 mm |
| Weight | approx. **109 kg** |
| Mounting type | Floor mounting, wall mounting or stacked |
H2: FAQs about the Deye SE-F16
What is the difference between the SE-F16 and the SE-F12?
The main difference lies in the capacity and the housing height. The SE-F16 delivers 16 kWh (314 Ah) and weighs around 109 kg, while the SE-F12 11.8 kWh (230 Ah) offers and weighs approx. 84 kg. Both use the same 51.2V architecture and are designed for identical applications, but the F16 offers significantly more autonomy per installed module.
What does the "C" in the designation SE-F16-C mean?
The suffix "-C" in Deye storage systems indicates the extended model variant which, in addition to Bluetooth monitoring, is also equipped with an integrated LCD display on the front of the housing. This allows the current state of charge (SoC), cell voltages and warning messages to be read directly on the device without having to open the app.
Do I absolutely need a Deye inverter for this battery?
No, but it is strongly recommended for smooth operation. The SE-F16 is "Plug & Play" compatible with Deye low-voltage hybrid inverters (such as the SG04 series), since the BMS protocol matches natively. With third-party brands (such as Victron, SMA or Solis), communication must first be configured manually via DIP switches or software settings. It is strongly recommended to check the compatibility list, as changes may occur on the manufacturer side.
Login
Customers also bought
The Deye SUN-12K-SG05LP3-EU-SM2 is a three-phase hybrid inverter for residential and commercial energy projects. It combines an inverter, battery charger and energy management system in one device, enabling efficient, flexible energy flow control in new installations and retrofits.Highlights at a glanceSupports both lead-acid and lithium-ion batteries for various storage optionsBattery voltage range from 40 to 60 volts for flexible application possibilitiesMaximum charging and discharging current of 240 amperes for fast energy absorption and releaseMaximum PV input power of 18,000 watts enables high-performance solar systemsTwo independent MPPT inputs for maximum energy yield even with different module orientationsUnbalanced output power with up to 50 percent of the rated power per phase for flexible load distributionEfficient energy conversion for modern requirementsThe Deye SUN-12K-SG05LP3-EU-SM2 achieves a maximum efficiency of 97.6 percent and boasts an MPPT efficiency of over 99 percent. The wide MPPT voltage range of 200 to 650 volts, in conjunction with a maximum PV input voltage of 800 volts, ensures efficient energy capture even under varying irradiation conditions. This high efficiency ensures economical operation and maximum yields from the solar system.Flexibility and scalabilityThe Deye SUN-12K-SG05LP3-EU-SM2 can be flexibly adapted to different requirements. Thanks to the ability to operate up to ten devices in parallel, it is suitable for both smaller systems and large energy projects. The AC coupling allows easy integration into existing systems, making the inverter also ideal for retrofitting. Support for various battery types enables tailor-made storage solutions matched to individual needs and budgets.Reliability and protectionWith an IP65 protection rating, the inverter is optimally protected against dust and water, and is suitable for demanding environmental conditions. The wide operating temperature range from minus 40 to plus 60 degrees Celsius ensures safe operation even under extreme climatic conditions. Comprehensive protection mechanisms such as overcurrent, overvoltage, short-circuit and thermal protection, as well as DC insulation impedance monitoring, provide maximum operational safety and a long system lifespan.Who is the Deye SUN-12K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forHomeowners who want to increase their self-consumption quota and reduce energy costsCommercial enterprises that require a stable and efficient power supplyUsers who want to expand existing solar systems with modern storage solutionsProjects in regions with fluctuating grid stability, where diesel generators are used as an additional energy source ModelDEYE SUN 12K-SG05LP3-EU-SM2 Battery input data Battery typeLi-lon Battery voltage range (V)40~60 Max. charging current (A)240 Max. discharging current (A)240 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adjustment to BMS PV string input data Max. DC input power (W)18000 Nominal PV input voltage (V)550 Start voltage (V)160 MPP voltage range (V)200-650 Max. DC input voltage (V)800 PV input current (A)26+26 Max. PV short-circuit current (A)39+39 Number of MPPT2 Strings per MPPT2+2 AC output data AC rated power and UPS power (W)12000 Max. AC output power (W)13200 AC rated output current (A)18.2/17.4 Max. rated AC output current (A)20/19.2 Max. continuous AC running (A)45 Peak power (without grid)2 times rated power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) DC feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection SafeguardsDC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, Thermal Protection, AC OutputSurge Protection, AC Output Short Circuit Protection, DC Component Monitoring, Overvoltage Load Protection,Earth Fault Current Monitoring, Arc Fault Circuit Interrupter (optional), Grid Monitoring,Island Protection Monitoring, Earth Fault Detection, DC Input Switch, DC IsolationImpedance Monitoring, Residual Current Detection (RCD), Surge Protection Level Surge categoryDC Type II/AC Type III Certifications and standards Grid approvalsIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G98, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN; RS232 Weight (kg)35,2 Size (mm)386B×660H×250 D Protection classIP65 Installation styleWall bracket Warranty10 years FAQs on the 10 kW Deye Hybrid InverterWhat types of batteries does the inverter support?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range of 40 to 60 volts.What is the maximum charging and discharging current?The maximum charging and discharging current is 240 amperes, which enables fast energy transfer.Can the inverter be operated with a diesel generator?Yes, the Deye SUN-12K-SG05LP3-EU-SM2 supports the integration of diesel generators for a safe and uninterrupted power supply.Which communication interfaces are available?The inverter offers interfaces such as RS485, RS232, CAN as well as options for GPRS, Wi-Fi, Bluetooth, 4G and LAN for monitoring and control.Can the inverter supply unbalanced loads?Yes, the inverter can supply an unbalanced load of up to 100 percent, with each phase being able to deliver up to 50 percent of the rated power. Scope of delivery: Deye SUN-12K-SG05LP3-EU-SM2 three-phase hybrid inverter 12KW 1 x Deye SUN-12K-SG04LP3-EU-SM2 inverterA three-phase hybrid inverter with 12 kW output, integrated LCD touchscreen and support for 48V low-voltage battery systems.1 x wall mount bracketA robust metal mounting rail for securely attaching the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A pluggable communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman App.3 x current transformers (CT - Current Transformer)External clamp current transformers for measuring energy flows at the house connection, necessary for zero feed-in and optimising self-consumption.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) to connect the PV strings to the inverter.1 x communication cable (BMS)A pre-tethered RJ45 data cable for connecting between the inverter and battery management system.1 x mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for correct installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, circuit diagrams and safety instructions.
The Deye SUN-20K-SG05LP3-EU-SM2 offers a reliable and efficient solution for energy conversion in photovoltaic systems. With its high charging and discharging capacity and support for various battery types, it is ideal for demanding energy projects.Highlights at a glanceHigh performance: 20 kW rated output for high energy requirements Flexible battery selectionCompatible with lead-acid and lithium-ion batteries High charging/discharging current: Up to 350A for fast power transmission Expandable: Parallel connection of up to 10 devices possible Robust designIP65 protection class for use in various environments Efficient energy conversion for modern requirementsThe Deye SUN-20K-SG05LP3-EU-SM2 is specially designed to meet the requirements of modern photovoltaic systems. With its three-phase output power and support for 48V low-voltage batteries, it offers an efficient solution for energy conversion and storage.Flexibility and scalabilityThanks to the option of connecting up to 10 devices in parallel, the inverter can be flexibly adapted to different system sizes. The support of both lead-acid and lithium-ion batteries enables customised adaptation to specific energy requirements.Reliability and protectionWith a protection class of IP65, the inverter is protected against dust and water, ensuring reliable operation in different environments. The integrated protective functions ensure safe and stable operation of the system.Who is the Deye SUN-20K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for: Operators of larger solar systems who are looking for a flexible and safe storage solution Commercial enterprises that want to cover energy peaks or work off-grid Homeowners who want to maximise their self-consumption rate Users with diesel generator support who are aiming for maximum self-sufficiency ModelSUN-20K-SG05LP3-EU-SM2 Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60V Max. Charging current (A)350A Max. Discharge current (A)350A Charging strategy for Li-ion batterySelf-adaptation to BMS Number of battery inputs2 Input data of the PV string Max. DC input power (W)32000W Max. DC input voltage (V)800V Starting voltage (V)160V MPPT voltage range (V)160V-650V Rated DC input voltage (V)550V Max. Operating PV input current (A)36+36A Max. Input short-circuit current (A)54+54A Number of MPP trackers/Number of MPP tracker strings2/2+2 AC input/output side Rated AC input/output effective power20000 Max. AC input/output apparent power22000 AC input/output rated current (A)30.4/29 Max. AC input/output current (A)33.4/31.9 Max. Continuous AC passthrough (mains for charging)70 Peak power (without mains)2x rated output power, 10s Setting range of the power factor0.8 leading to 0.8 trailing Nominal input/output voltage/range (V)220/380V, 230/400V 0.85Un-1.1Un Nominal input/output mains frequency/range(Hz)50/45-55, 60/55-65 Form of the mains connection3L+N+PE Total harmonic current distortion (THDi)<3% ( rated power ) DC current power supply<0.5% In Efficiency Max. Efficiency97,6% Euro efficiency97,0% MPPT efficiency>99% Protection of the devices IntegratedDC reverse polarity protection, AC output overcurrent protection, AC output overvoltage protection, AC output short-circuit protection, thermal protection, DC terminal insulation impedance monitoring, DC component monitoring, earth fault current monitoring, power grid monitoring, protection against islanding, earth fault detection, overvoltage load shedding protection, residual current monitoring (RCD), overvoltage category Overvoltage protection levelTYPE II(DC), TYPE II(AC) Interface Communication interfaceRS485/RS232/CAN Monitor modeGPRS/WIFI/Bluetooth/4G/LAN (optional) General data Operating temperature range (℃)-40 to +60°C, >45°C power reduction Permissible ambient humidity0-100% Permissible height3000m Noise (dB)<60 dB(A) Protection classIP 65 Inverter topologyNon-insulated Overvoltage categoryOVC II(DC), OVC III(AC) Dimensions (WxHxD mm)456×750×268.5 (without connectors and brackets) Weight (kg)51.9 Cooling modeIntelligent cooling Guarantee5-year/10-year warranty period depends on the installation conditions of the inverter. Details can be found in the general warranty conditions Mains regulationIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE guideline R25, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 FAQs about the Deye Sun three-phase hybrid inverterWhich battery types are supported?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range from 40 to 60V.Can I operate several devices in parallel?Yes, up to 10 units can be operated in parallel, making the inverter ideal for larger systems.What is the maximum charging and discharging current?The maximum charging and discharging current is 350A each, which enables fast energy transfer.What is the standby consumption of the device?The Deye SUN-20K-SG05LP3-EU-SM2 has a self-consumption of ≤ 60 W.Does the 20 kW inverter fit on an 18 kWp system or do I have to oversize/undersize?Yes, the Deye SUN 20K-SG05LP3-EU-SM2 is technically optimised for an 18 kWp system. It does not necessarily have to be oversized or undersized. With a DC/AC ratio of around 0.9, it is exactly in the ideal range (0.9 - 1.1 is recommended). This means that the system is even slightly undersized, but this has practically no disadvantages and at the same time offers scope for retrofitting additional modules at a later date. Scope of delivery: Deye SUN-20K-SG05LP3-EU-SM2 (20 kW LV hybrid inverter) 1 x Deye SUN-20K-SG05LP3-EU-SM2 inverterAn extremely powerful three-phase hybrid inverter with 20 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA solid metal mounting rail for securely fastening the appliance to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x current transformer (CT)External hinged current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and plugs)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x operating instructions (user manual)A printed manual with detailed installation instructions, circuit diagrams and safety instructions.
The Deye SUN-15K-SG05LP3-EU-SM2 is a high-performance three-phase hybrid inverter developed for demanding photovoltaic systems in both commercial and private sectors. With a charging and discharging capacity of up to 350 A, support for various battery types and versatile application options, it is a reliable solution for modern energy systems.Highlights at a glanceHigh performance: 15 kW rated power for medium to large PV systemsFlexible battery application: Compatible with 48 V lithium-ion and lead-acid batteriesPowerful charge and discharge current: Up to 280A for rapid energy storageParallel operation: Operation of up to 10 devices possible, on-grid and off-gridDiesel generator compatible: Support for external power sourcesEfficient energy conversion for modern requirementsThe Deye SUN-15K-SG05LP3-EU-SM2 enables a high self-consumption rate through intelligent battery management, flexible PV feed-in and versatile communication interfaces. With a maximum efficiency of 97.6 percent and MPPT efficiency of over 99 percent, the system operates extremely efficiently and is energy-optimised.Flexible integration and retrofittingWhether as part of a new photovoltaic system or to expand existing systems, thanks to AC coupling and parallel operation, the SUN-15K is highly versatile. The combination with up to 10 inverters and various battery types allows scalable storage solutions and maximum system availability.Intelligent grid and island operationThe inverter supports operation on the public grid as well as self-sufficient island operation. Integrated communication via RS485, CAN, Wi-Fi, GPRS or LAN (optional) allows for easy integration into monitoring and control systems. The protection functions and IP65 protection class guarantee maximum operational safety.Who is the Deye SUN-15K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for:PV systems in commercial or private sectors with moderate energy demandSystems operated in parallel with the grid or independentlyProjects requiring maximum flexibility and reliabilityExisting systems to be modernised via AC coupling ModelSUN-15K-SG05LP3-EU-SM2 Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60V Max. charging current (A)280A Max. discharging current (A)280A Charging strategy for Li-ion batterySelf-adaptation to BMS Number of battery inputs2 PV string input data Max. DC input power (W)22500W Max. DC input voltage (V)800V Starting voltage (V)160V MPPT voltage range (V)160V-650V Nominal DC input voltage (V)550V Max. operational PV input current (A)36+36A Max. input short-circuit current (A)54+54A Number of MPP trackers/number of strings per MPP tracker2/2+2 AC input/output side Rated AC input/output active power15000 Max. AC input/output apparent power16500 AC input/output rated current (A)22.8/21.8 Max. AC input/output current (A)25/24 Max. continuous AC passthrough (Grid for charging)70 Peak performance (off-grid)2x rated output power, 10s Power factor adjustment range0.8 leading to 0.8 lagging Rated input/output voltage/range (V)220/380V, 230/400V 0.85Un-1.1Un Rated input/output grid frequency/range(Hz)50/45-55, 60/55-65 Form of grid connection3L+N+PE Total harmonic current distortion (THDi)<3% ( rated power ) DC current feed-in<0,5% In Efficiency Max. efficiency97,6% Euro efficiency97,0% MPPT efficiency>99% Device protection IntegratedDC reverse polarity protection, AC output overcurrent protection, AC output overvoltage protection, AC output short-circuit protection, thermal protection, DC terminal insulation resistance monitoring, DC component monitoring, ground fault current monitoring, grid monitoring, islanding protection, ground fault detection, overvoltage load shedding protection, residual current monitoring (RCD), overvoltage category Surge protection levelTYPE II(DC), TYPE II(AC) Interface Communication interfaceRS485/RS232/CAN Monitor modeGPRS/WIFI/Bluetooth/4G/LAN (optional) General data Operating temperature range (℃)-40 to +60°C, >45°C power reduction Permissible ambient humidity0-100% Permissible altitude3000m Noise (dB)<60 dB(A) Protection classIP 65 Inverter topologyNon-isolated Overvoltage categoryOVC II(DC), OVC III(AC) Dimensions (WxHxD mm)456×750×268.5 (Without connectors and brackets) Weight (kg)50.6 Cooling methodIntelligent cooling Warranty5-year/10-year warranty period depends on the installation conditions of the inverter. For details, please refer to the general terms and conditions of warranty Grid regulationIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 FAQs about the Deye SUN-15K-SG05LP3-EU-SM2Which battery systems are compatible?It supports low voltage batteries with a voltage of 40–60 V, both lithium-ion and lead-acid. Communication takes place intelligently via BMS protocols. The maximum charging and discharging current is up to 280 A.How efficient is this inverter?The maximum efficiency is 97.6%, the EU efficiency is 97.0%, which means very low losses.How many MPPTs and strings does it support?It has two MPP trackers, each of which can be connected to up to two PV strings (2 strings per MPPT).Can I operate several devices in parallel?Yes, up to 10 devices can be operated in parallel in on-grid or off-grid mode to flexibly scale system performance and capacity.What protection features are integrated?It is protected to IP65 and therefore protected against dust and water jets. In addition, it features comprehensive protection functions against DC reverse polarity, overcurrent, overvoltage, short circuit, earth faults and arc faults (“AFCI”). Scope of delivery: Deye SUN-15K-SG05LP3-EU-SM2 Three-phase Hybrid Inverter 15 kW 1 x Deye SUN-15K-SG05LP3-EU-SM2 inverterThe three-phase hybrid inverter with 15 kW output, integrated LCD colour touchscreen and support for 48V batteries.1 x wall mount bracketA robust metal rail for secure mounting of the device to a wall of sufficient load-bearing capacity.1 x Wi-Fi stick (data logger)A plug-in module for integrating the inverter into the local Wi-Fi network for monitoring via Deye Cloud or Solarman App.3 x current transformers (CT - Current Transformer)Split-core current transformers for measuring the energy flows at the house connection, necessary for functions such as zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The corresponding pairs of connectors (plus and minus) for connecting the photovoltaic strings to the DC inputs.1 x communication cable (BMS)A pre-assembled RJ45 cable for data connection between the inverter and the battery management system of the storage unit.1 x mounting kitIncludes the necessary stainless steel screws and heavy-duty dowels for the correct installation of the wall bracket.1 x User ManualA printed manual with technical specifications, wiring diagrams, installation instructions and safety advice.
The Deye SUN-8K-SG05LP3-EU-SM2 is a powerful three-phase hybrid inverter. It has been specially designed for residential and commercial applications, combining inverter, battery charger and intelligent energy management system in a single device. This all-in-one solution is ideal for new installations as well as for retrofitting existing photovoltaic systems and reliably maximises self-consumption and energy efficiency.Highlights at a glanceSupports both lead-acid and lithium-ion batteries for flexible storage solutionsBattery voltage range of 40 to 60 volts for different storage requirementsMaximum charge and discharge current of 190 amperes enables fast energy transferMaximum PV input power of 12,000 watts for larger solar installationsUnbalanced output power with up to 50 percent of the rated power per phase enables flexible load distributionParallel connection of up to 10 devices for customisable system sizesEfficient energy conversion for modern requirementsThe Deye SUN-8K-SG05LP3-EU-SM2 offers a maximum efficiency of 97.6 percent and an MPPT efficiency of over 99 percent. The wide MPPT voltage range of 200 to 650 volts ensures that high energy yield is achieved even under changing irradiation conditions. With a maximum PV input voltage of 800 volts, the inverter is optimally suited for high-performance solar module arrays. This helps to sustainably increase the profitability and economic efficiency of the photovoltaic system.Flexibility and scalabilityThe Deye SUN-8K-SG05LP3-EU-SM2 is adaptable to different requirements. With the possibility of operating up to ten devices in parallel, the system can be scaled for both smaller and larger energy projects. AC coupling enables easy integration into existing solar systems without the need for extensive modifications. Thanks to support for both types of batteries, lead-acid and lithium-ion, the inverter offers high adaptability to individual storage solutions.Reliability and protectionWith an IP65 protection class, the inverter is optimally protected against dust and water, making it suitable for use in a wide range of environments. The operating temperature range from minus 40 to plus 60 degrees Celsius ensures reliable operation even under extreme weather conditions. Extensive protection features such as overcurrent, overvoltage, short-circuit and thermal protection, DC reverse polarity protection and DC insulation impedance monitoring ensure a high level of operational safety and a long service life for the device.Who is the Deye SUN-8K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forHomeowners looking for a powerful and flexible solution for self-consumption and grid independenceCommercial users seeking a stable and efficient power supplyUsers who wish to retrofit modern storage solutions to existing solar installationsInstallations in regions with fluctuating grid supply, where diesel generators provide additional supply security ModelDEYE SUN 8K-SG05LP3-EU-SM2 Battery input data Battery typeLi-lon Battery voltage range (V)40~60 Max. charge current (A)190 Max. discharge current (A)190 Number of battery inputs1 Charging strategy for Li-Ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)12000 Nominal PV input voltage (V)550 Start voltage (V)160 MPP voltage range (V)200-650 Max. DC input voltage (V)800 PV input current (A)20+20 Max. PV short-circuit current (A)30+30 Number of MPPT2 Strings per MPPT1+1 AC output data AC rated power and UPS power (W)8000 Max. AC output power (W)8800 AC output rated current (A)12.2/11.6 Maximum AC output rated current (A)13.4/12.8 Max. continuous AC passthrough (A)45 Peak power (without grid)2x rated power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) DC feed-in<0.5% ln Efficiency Max. efficiency97.60% Euro efficiency97.00% MPPT efficiency99.90% Protection FusesDC polarity reverse connection protection, AC output overcurrent protection, thermal protection, AC outputovervoltage protection, AC output short-circuit protection, DC component monitoring, overvoltage load protection,earth fault current monitoring, arc fault current interrupter (optional), grid monitoring,islanding protection monitoring, earth fault detection, DC input switch, DC isolationimpedance monitoring, residual current detection (RCD), surge protection level Surge protection categoryDC Type II/AC Type III Certifications and standards Grid approvalsIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE directive R25, G98, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45°C power reduction CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN; RS232 Weight (kg)35.2 Size (mm)422B×699.3H×279T Degree of protectionIP65 Installation styleWall mounting Warranty10 years FAQs about the 8 kW Deye Sun Hybrid InverterWhich battery types does the inverter support?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range from 40 to 60 volts.What is the maximum charge and discharge current?The maximum charge and discharge current is 190 amperes, enabling rapid energy transfer.What protection functions are integrated in the Deye?The inverter offers protection mechanisms such as DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, optional arc fault protection switch, islanding protection, DC switch, insulation impedance detection, earth fault detection, and class II overvoltage protection for DC and AC.Is the inverter suitable for retrofitting existing systems?Yes, the inverter can be easily integrated into existing solar systems thanks to AC coupling.Can the inverter supply unbalanced loads?Yes, the inverter can supply an unbalanced load of up to 100 percent, with each phase supplying up to 50 percent of the rated output. Scope of delivery: Deye SUN-8K-SG05LP3-EU-SM2 (8 kW LV Hybrid Inverter) 1 x Deye SUN-8K-SG05LP3-EU-SM2 inverterA three-phase hybrid inverter with 8 kW output, integrated LCD colour touch screen and support for 48V low voltage battery systems.1 x wall bracket (Wall Mount Bracket)A robust metal mounting rail for securely attaching the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the Internet for remote monitoring via Deye Cloud or Solarman App.3 x current transformer (CT - Current Transformer)External clamp-on current transformers for measuring energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The pairs of DC connectors required (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter and the battery management system.1 x mounting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for professional installation of the wall bracket.1 x user manual (User Manual)A printed manual with detailed installation instructions, wiring diagrams and safety information.
The Solar cable SOLS650 (50 metres, 6mm²) in black is the ideal cable by the metre for photovoltaic projects that demand the highest standards of efficiency and durability. With a length of 50 metres and a reinforced cross-section of 6mm², this cable provides perfect reserves for string cabling on house roofs or connecting distant module fields. The black colouring serves as a standard-compliant identification of the negative pole (-), which makes installation clear and minimises the risk of reversed polarity.Certified to the international standard IEC 62930, this cable meets the strictest requirements for use in modern PV systems up to 1500V DC. The generous cross-section ensures that even with high current from modern high-performance modules, the voltage drop is minimised and the total yield of your system is maximised.Highlights at a glanceMaximum efficiency: The 6mm² cross-section massively reduces electrical resistance and achieves minimal voltage drop, especially over distances of 50 metres.Certified safety: Complies with IEC 62930 standard (H1Z2Z2-K) for continuous use in photovoltaic DC systems up to 1500V.Optimum project length: 50 metres in one piece allow uninterrupted installation without additional connectors between the module field and inverter.Weather & UV resistant: The premium XLPO double insulation protects the cable for decades against embrittlement from sun, ozone and extreme weather conditions.Corrosion-protected conductor: Fine-stranded, tinned copper delivers best conductivity in the long run and effectively protects against oxidation, even in damp or salty environments.High thermal load capacity: Reliable operation in a wide temperature range from -40°C to +90°C.Areas of applicationThe SOLS650 is the ideal choice for demanding installation scenarios:Large roof systemsPerfect for connecting the solar modules to the inverter when this is installed in the basement or a distant technical room.High-performance balcony power plantsIdeal for systems with modern modules (500Wp+), to safely and losslessly transport the high currents.Island & battery storageExcellent for 24V or 48V systems where low voltage drops are crucial for optimal battery charging.Assembly & safety instructionsProfessional connectionFor assembly, use only high-quality MC4 connectors approved for 6mm² cross-sections. A precise crimp using a special solar crimping tool is essential.Mechanical fixingAttach the cable at regular intervals with UV-resistant cable ties to prevent mechanical stress due to wind or its own weight on the connections.Avoidance of induction loopsRoute the black negative cable as parallel and close as possible to the red positive cable to minimise electromagnetic interference fields and the risk of induction by lightning. Features Model / SKU**SOLS650** Conductor cross-section**6.0 mm²** Delivery form**50 metre ring** ColourBlack (negative pole) Rated voltageDC: 1.5 kV / Max. 1.8 kV Conductor materialCopper, tinned (class 5) Temperature range-40°C to +120°C (on the conductor) Certification**IEC 62930 / EN 50618** Special featureHalogen-free, UV-resistant & short-circuit-proof FAQs about the solar cable black 50m 6mm²Why is 6mm² for 50 metres better than 4mm²?Because of the lower resistance.Over a distance of 50 metres, the electrical resistance adds up. With 6mm² you reduce the voltage drop by about a third compared to 4mm². This ensures higher system voltage at the inverter and thus measurably higher yield.Can the cable be laid freely outdoors?Yes.The cable is specially certified for permanent outdoor installation. It is resistant to UV light, ozone and ammonia, which also qualifies it for use in agriculture.Is the cable flame-retardant?Yes.The XLPO insulation is flame-retardant and halogen-free. In the event of fire, the cable hardly develops any smoke and no corrosive gases, which significantly increases building safety.
The Deye SUN-12K-SG02LP1-EU is a high-performance hybrid inverter for modern photovoltaic systems. With up to 12 kW AC output, flexible battery connectivity and extensive protection functions, it provides a reliable solution for grid-tied and off-grid applications in both residential and commercial environments.Highlights at a glanceHigh performance: 12 kW AC output power for demanding energy systemsFlexible operation: Up to 16 units can be used in parallel – on-grid and off-gridVersatile storage integration: Supports lithium-ion and lead-acid batteriesSmart energy management: 6 freely definable time slots for charging and dischargingMaximum safety: Integrated protection against overload, short circuit, overvoltage and island operationEfficient energy use with hybrid technologyThe SUN-12K-SG02LP1-EU supports both DC and AC coupling, making it ideal for new installations and retrofits. Thanks to a maximum efficiency of 97.6% and an MPPT efficiency of 99.9%, it ensures optimal energy conversion.Flexibility through parallel connectionUp to 16 inverters can be operated in parallel, both in on-grid and off-grid operation. This allows realisation of projects of any size, from large private homes to larger commercial installations.Smart battery usageWith a maximum charge and discharge current of 190 A and adaptive communication with the BMS (RS485, CAN), the inverter supports both lithium-ion and lead-acid batteries. The battery can also be charged via a diesel generator, further extending its application range.Safety and protection functionsThe Deye SUN-12K-SG02LP1-EU is certified to international standards and offers comprehensive protections: overvoltage and short circuit protection, anti-islanding, residual current monitoring, and PV string monitoring. This makes it compliant with the highest safety standards for stable operation.Who is the Deye SUN-12K-SG02LP1-EU suitable for?This hybrid inverter is ideal for:Private households with a high share of self-consumptionCommercial operations requiring uninterruptible power supplyInstallations that require flexible expandability by parallel connectionOperators of PV systems wishing to use both grid-tied and off-grid operationFeatures ModelDeye SUN-12K-SG02LP1-EU Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60 Max. charge current (A)250 Max. discharge current (A)250 Charging strategy for Li-Ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)18000 Nominal PV input voltage (V)500 Starting voltage (V)125 MPP voltage range (V)150-425 PV input current (A)26+26+26 Max. PV short-circuit current (A)44+44+44 Number of MPPT3 Strings per MPPT2+2+2 AC output data AC rated power and UPS power (W)12000 Max. AC output power (W)13200 AC output rated current (A)52.2 Max. AC current (A)57.4 Max. continuous AC pass (A)80 Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Efficiency Max. efficiency97.60% Euro efficiency97.00% MPPT efficiency99.90% General data Operating temperature range (°C)-40~60°C, >45°C power derating Communication with BMSRS485; CAN Weight (kg)35.6 Size (mm)420B x 670H x 233T Degree of protectionIP65 Warranty10 years FAQs on the Deye SUN-12K-SG02LP1-EU hybrid inverterWhich battery types can be connected to the 12 kW inverter?The inverter is compatible with lithium-ion and lead-acid batteries and adapts its charging strategy automatically to the respective BMS.Can the single-phase inverter be used in parallel?Yes, up to 16 devices can be connected in parallel, both for grid-tied and off-grid systems.What protection functions are integrated?The device offers surge, short circuit, islanding and overcurrent protection as well as integrated monitoring for PV strings and residual currents.Is the inverter suitable for retrofitting?Yes, thanks to AC and DC coupling, the SUN-12K-SG02LP1-EU is suitable for both new installations and expanding existing PV systems.What warranty applies to the device?Deye provides a manufacturer’s warranty of 10 years. Scope of delivery: Deye SUN-12K-SG02LP1-EU 12 kW hybrid inverter single-phase 1 x Deye SUN-12K-SG02LP1-EU inverterA single-phase hybrid inverter with 12 kW output, integrated colour LCD touchscreen and support for 48V low voltage battery systems.1 x wall mount bracketA sturdy metal mounting rail for securely attaching the device to a solid wall.1 x Wi-Fi stick (data logger)A plug-in communication module for internet connection for remote monitoring via the Deye Cloud or Solarman app.1 x current transformer (CT - Current Transformer)An external split-core current transformer for measuring power flows at the grid connection point, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The necessary pairs of DC connectors (positive and negative) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter and the battery management system.1 x mounting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty expansion plugs for correct installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, circuit diagrams and safety information.