Beltrona LED emergency luminaire for pendant mounting

This high-quality escape sign luminaire from Beltrona has been specially developed for direct wall mounting and ensures clear and compliant marking of escape and rescue routes. With a standard detection range of 27 metres, durable LED technology and a comprehensive, included pictogram set, this luminaire offers maximum flexibility and safety for professional installations in almost any building project.Highlights at a glanceOptimised for wall mounting: Ideal for installation above doors, at corridor ends, and in stairwells.Clear visibility: Guarantees a standard detection range of 27 metres in accordance with EN 1838.Flexible pictogram set: A set with 4 directional pictograms and a blank film are included.Durable LED technology: High efficiency, long service life and minimal maintenance effort.High quality: Robust housing and compliance with all relevant European standards for emergency lighting.Clear marking of escape routesThis escape sign luminaire is the ideal solution for compliant safety signage in a wide variety of properties. Direct wall mounting is the classic installation method for marking exits or at the end of escape routes where a clear directional sign is required. It is perfect for use in office buildings, retail spaces, schools, hospitals and industrial halls.Advanced and efficient LED technologyThe heart of the luminaire is a modern LED module that ensures bright and absolutely uniform illumination of the pictogram. Compared to older fluorescent lamps, LED technology offers a significantly longer service life of up to 50,000 hours, higher switching resistance and immediate full brightness in an emergency. This significantly reduces operating costs and maintenance over the entire life of the building.Designed for easy installation and flexibilityThe luminaire is designed for quick and faultless installation by the professional installer. The included pictogram set can be easily applied to the acrylic panel to flexibly define the escape route direction on site. This saves the need to stock different luminaire variants and allows on-site adaptation directly on the construction site as required. Features  ModelBeltrona LED escape sign luminaire (single battery) General luminaire data ApplicationEscape route marking Mounting typeWall surface mounting Operating modeContinuous / standby mode Detection range (m)approx. 20 Light sourceLED strip (integrated) Dimensions (W x H x D in mm)approx. 260 x 180 x 45 Integrated battery TechnologyLiFePO4 Rated voltage (V)3.2 Capacity (Ah)1.5 Autonomy time (h)3  FAQs on the escape sign luminaireWhat does "detection range 27m" mean?The detection range is the maximum distance from which an escape sign can still be clearly recognised and read as such. It is determined by the height of the pictogram and is specified in the EN 1838 standard. A detection range of 27 metres is a common standard value for many areas of application.Why is a pictogram set included?A separate set offers maximum flexibility on the construction site. The final direction of the escape routes is often only clear during installation. With this set, the installer can individually adapt each luminaire to the conditions without having to carry different luminaire variants with permanently printed pictograms.What is the blank film used for?The blank film (or dummy film) serves as a placeholder or can be used to cover one side of a luminaire if required. In some cases, it is also used as a pure signal luminaire without a specific direction to generally mark an emergency exit.Can the luminaire be operated in continuous and standby mode?Yes, depending on the version, the luminaire is designed for both operating modes. With single-battery luminaires, this can often be set directly on the luminaire. For luminaires for central battery systems, the operating mode (continuous operation/DS or standby mode/BS) is set centrally in the emergency power system for the respective circuit. According to most building regulations, escape sign luminaires must be operated in continuous operation.

This high-quality Beltrona replacement battery has been specially developed for use in single-battery emergency lights of the Mexcel M72 series. The battery pack consists of four robust NiMH cells in AAA size, which are assembled into a compact cube of 4. With a nominal voltage of 4.8 V and a capacity of 800 mAh, this battery ensures the standard-compliant emergency lighting duration of your safety lighting and offers maximum reliability and longevity.Highlights at a glancePrecisely fitting replacement: Specially designed for the Mexcel emergency light series M72 and compatible models.Reliable NiMH technology: Offers high capacity and cycle stability for demanding emergency lighting operation.Compact cube design: The 2x2 arrangement of the AAA cells enables a space-saving installation in the luminaire.Pre-assembled ready for connection: Equipped with a suitable connection cable and JST plug for quick and error-free replacement.High quality: Use of high-quality industrial cells for a long service life and maximum operational safety.Reliable power for your safety lightingA working battery is the heart of every single-battery emergency light. This Beltrona replacement battery ensures that your safety and escape sign luminaires reliably provide the prescribed energy for the emergency lighting period (e.g. 3 hours) in the event of a power failure. It is the ideal choice for periodic replacement in office buildings, retail outlets, schools and other public institutions to maintain the operational readiness of the emergency lighting system.Robust and proven nickel-metal hydride technologyNickel-metal hydride technology (NiMH) is the modern standard for single-battery emergency lights. Compared to the outdated NiCd technology, it is more environmentally friendly as it does not contain heavy metals such as cadmium, and generally has a higher energy density. The cells used in this pack are optimised for the characteristic continuous trickle charge in emergency lighting systems and offer a long service life.Developed for easy and safe replacementThis replacement battery is designed as a plug-and-play solution for professional installers. The assembly as a compact cube, the precisely fitting cable and the standardised JST plug enable a quick and uncomplicated replacement of the old battery. This minimises maintenance times and ensures that the emergency light is quickly fully operational again. Features  ModelBeltrona replacement battery for Mexcel M72 ApplicationEmergency light battery TechnologyNickel-metal hydride (NiMH) Nominal voltage (V)4.8 Capacity (mAh)800 Cell arrangementBar (4 cells in series) Dimensions (L x W x H in mm)approx. 100 x 29 x 15 ConnectionCable with Molex plug Weight (g)approx. 110  FAQs about the replacement battery for emergency lightsHow do I recognise when the battery in an emergency light needs replacing?Modern emergency lights with autotest function usually indicate a defective or depleted battery by a status LED (e.g. via red flashing). At the latest, if the light no longer passes the annual endurance test for the full emergency lighting period, the battery must be replaced immediately. The typical lifespan of a NiMH battery in this application is approximately 4 years.Why is it important to use the exactly matching plug?The JST plug is a widely used standard in electronics. Using the appropriate pre-assembled plug ensures a polarity-safe and electrically flawless connection to the luminaire electronics. DIY solutions using screw terminals or adhesive tape are not permitted in safety-relevant systems.Can I replace this battery with one with a higher capacity (mAh)?As a rule, this is possible as long as the voltage (4.8V), technology (NiMH) and design are identical. A higher capacity will result in a longer emergency lighting period. However, you must ensure that the battery physically fits into the luminaire housing.How should this battery be disposed of?Batteries must not be disposed of with household waste. As a used device battery, you can return it free of charge at collection points in retail or at municipal recycling centres (e.g. via the GRS collection boxes) to ensure professional and environmentally friendly recycling.

This high-quality Beltrona replacement battery has been specially developed for use in single-battery emergency luminaires of the Mexcel M72 series, which are designed for an emergency lighting duration of 8 hours. The battery pack consists of four high-capacity and robust NiMH AA-size cells, assembled into a compact 4-cell cube. With a nominal voltage of 4.8 V and a high capacity of 2200 mAh, this battery ensures standard-compliant, extended emergency lighting duration for your safety lighting, providing maximum reliability and longevity.Highlights at a glancePrecisely fitting replacement: Specially designed for the Mexcel emergency luminaire series M72 with 8 hours operating time.High capacity: 2200 mAh to meet the requirement for 8-hour emergency lighting autonomy.Reliable NiMH technology: Offers high cycle stability for demanding emergency lighting operation.Compact cube design: The 2x2 arrangement of the AA cells allows space-saving installation in the luminaire.Ready-to-connect assembly: Equipped with a suitable connection cable and JST plug for fast and error-free replacement.Reliable power for your safety lightingA functioning battery is the heart of every single-battery emergency luminaire. This Beltrona replacement battery ensures that your safety and escape sign luminaires reliably provide the prescribed, extended power for 8 hours in the event of a power failure. It is the ideal choice for routine replacement in buildings with special safety requirements such as accommodation facilities, places of assembly or high-rise buildings, to maintain the operational readiness of the emergency lighting system.Robust and proven nickel-metal hydride technologyNickel-metal hydride technology (NiMH) is the modern standard for single-battery emergency luminaires. Compared to the outdated NiCd technology, it is more environmentally friendly as it contains no heavy metals such as cadmium, and has a higher energy density. The high-capacity AA cells used in this pack are optimised for the characteristic continuous trickle charge in emergency lighting systems and offer a long service life.Developed for easy and safe replacementThis replacement battery is designed as a plug-and-play solution for the professional installer. The compact cube assembly, the precisely fitting cable and the standardised JST plug enable quick and uncomplicated replacement of the old battery. This minimises maintenance times and ensures that the emergency luminaire is quickly fully operational again. Features  ModelBeltrona replacement battery for Mexcel M72 (8h) ApplicationEmergency luminaire battery (8 hours) TechnologyNickel-metal hydride (NiMH) Nominal voltage (V)4.8 Capacity (mAh)2200 Cell arrangementBlock (2x2 cells) Dimensions (L x W x H in mm)approx. 58 x 52 x 15 ConnectionCable with Molex plug Weight (g)approx. 115  FAQs about the replacement battery for emergency luminairesHow can I tell if the battery in an emergency luminaire needs to be replaced?Modern emergency luminaires with autotest function usually signal a defective or exhausted battery via a status LED (e.g. by red flashing). At the latest, if the luminaire no longer passes the annual endurance test over the full emergency lighting duration, the battery must be replaced immediately. The typical service life of a NiMH battery in this application is approx. 4 years.In which cases is an emergency lighting duration of 8 hours required?An extended emergency lighting duration of 8 hours is often required in buildings with special risks or regulations. These include, for example, accommodation facilities (hotels), high-rise buildings, large places of assembly or workplaces with special hazards, to ensure safe evacuation even over a longer period of time.Can I use this battery in a luminaire for 3 hours emergency lighting duration?Technically, this is often possible if the battery fits physically. The luminaire would then achieve a significantly longer autonomy time than required. However, it is always recommended to use the battery type specified by the luminaire manufacturer for the respective model (3h or 8h) to ensure optimal function of the charging and monitoring electronics.How must this battery be disposed of?Batteries must not be disposed of in household waste. As waste device batteries, you can return them free of charge to collection points in retailers or at municipal recycling centres (e.g. via the GRS collection boxes) to ensure proper and environmentally friendly recycling.

This high-quality emergency light from Beltrona has been specially developed for surface-ceiling mounting and ensures reliable and standard-compliant emergency lighting in the event of a power failure. As a self-contained single-battery luminaire with a long-life battery and automatic test function, it offers maximum flexibility during installation and low-maintenance operation. The luminaire combines a functional, robust design with modern LED technology and optimised lenses for illuminating escape routes or anti-panic areas.Highlights at a glanceSimple surface mounting: Ideal for direct installation on solid ceilings or in areas without suspended ceiling construction.Self-contained single-battery system: Integrated, long-life battery (e.g. LiFePO4) for an emergency lighting duration of 3 hours.Automatic test function: Carries out regular self-tests and displays the status via an LED, which simplifies maintenance.Optimised illumination: Interchangeable lenses for targeted escape route or anti-panic lighting as required.Durable LED technology: High efficiency, long service life and minimal maintenance.Reliable illumination in an emergencyThis emergency luminaire is the ideal solution for compliant emergency lighting in a wide variety of premises. Surface-ceiling mounting is perfectly suited for use in corridors, stairwells, offices, retail outlets, schools, and hospitals. It ensures that in an emergency, escape and rescue routes are clearly recognisable and panic in larger areas is avoided by providing sufficient illumination.Advanced and efficient LED technologyAt the heart of the luminaire is a modern LED module that ensures high luminous efficacy with minimal energy consumption. Compared to older fluorescent lamps, LED technology offers a significantly longer service life of up to 50,000 hours, greater switching resilience and instantaneous full brightness in an emergency. This significantly reduces operating costs and maintenance throughout the entire service life of the building.Designed for easy installation and minimised maintenanceThe luminaire is designed for fast and error-free installation by professional electricians. As it is a single-battery luminaire, only a 230V mains connection is required. The automatic test function (autotest) independently checks the operation of the light source and battery at regular intervals and signals the status via a multi-coloured LED. This significantly reduces manual testing and lowers operating costs. Features  ModelBeltrona LED emergency luminaire (surface ceiling mounting) General luminaire data ApplicationEscape route & anti-panic lighting Mounting typeSurface ceiling mounting Operating modeContinuous / standby mode Luminous flux (Lumen)approx. 200 Light sourceLED (integrated) Dimensions (Ø x H in mm)approx. 120 x 45 Integrated battery TechnologyLiFePO4 Rated voltage (V)3.2 Capacity (Ah)1.5 Autonomy time (h)3  FAQs about the emergency luminaireWhat is the difference between escape route and anti-panic lighting?The escape route lighting uses a special lens to illuminate a long, narrow corridor, thus clearly defining the course of the escape route. Anti-panic lighting uses a wide, rotationally symmetrical lens to evenly illuminate large, open areas (e.g. foyers, conference rooms) and thus makes orientation easier and helps to avoid panic.What is the advantage of a single-battery luminaire with autotest?A single-battery luminaire does not require connection to a central emergency power system and is therefore very flexible in installation and ideal for retrofitting. The autotest function automates the required function tests and reports faults directly on the luminaire, which considerably simplifies the regular manual inspection.Can the luminaire be operated in continuous and standby mode?Yes, modern single-battery luminaires are usually suitable for both operating modes and can often be set directly on the luminaire. In standby mode (BS) the emergency lighting only switches on in the event of a power failure. In continuous mode (DS) it lights up permanently and can, for example, serve as a night light in corridors.What are the advantages of modern batteries such as LiFePO4?Modern lithium iron phosphate batteries (LiFePO4) offer a significantly longer service life of up to 8 years compared to older NiCd batteries, halving maintenance intervals. In addition, they are more environmentally friendly, as they do not contain toxic heavy metals.

The M16 light module M72 is a self-sufficient and highly flexible lighting unit that has been developed for professional integration into furniture, machines and mobile systems. It combines an intelligent control board (M72), a long-life lithium iron phosphate (LiFePO4) battery and a high-intensity LED strip to create a compact and ready-to-install complete solution. Thanks to the versatile mounting options (except wall mounting), the module is perfect as low-maintenance cabinet lighting, machine lighting or safety lighting.Highlights at a glanceSelf-sufficient complete solution: Integrated unit consisting of control, high-performance battery and LED strip.Long-life LiFePO4 technology: Offers maximum cycle stability, long service life and maximum operational safety.Flexible mounting options: Suitable for installation, assembly and integration into various materials and objects.High light output: Modern LED technology for bright and even illumination.Low-maintenance operation: The robust LFP battery technology ensures reliable operation for years without battery replacement.Versatile lighting for professional applicationsThe M16 light module is designed as a versatile "fit-and-forget" solution. It is ideal for use as interior lighting in high-quality cabinets, showcases and sales displays where wireless installation is required. In industry, it serves as a status indicator or maintenance-free workplace lighting directly on machines. Other applications can be found in motorhomes, boats or as emergency lighting in technical installations that require a light source independent of the main power supply.Superior and safe LiFePO4 battery technologyThe heart of the module is the integrated lithium iron phosphate (LiFePO4) battery. This battery technology is considered the safest and most durable in the lithium-ion sector. It offers an extremely high number of charge and discharge cycles (several thousand), is thermally stable and intrinsically safe, minimising the risk of fire. Compared to conventional lithium or lead batteries, it offers a significantly longer service life and more reliable operation.Developed for seamless integrationThe M72 control board manages the charging and discharging process of the battery and ensures efficient operation of the LED strip. The entire module is designed for easy integration. It can be embedded in cut-outs, screwed onto surfaces or fastened with retaining clips. The compact design and self-sufficient power supply enable clean, cable-free installation in a wide range of demanding projects. Features  ModelM16 light module M72 General module data ApplicationEmergency lighting, signal light Protection classIP67 Dimensions (L x W x H in mm)approx. 250 x 50 x 30 Weight (g)approx. 450 Integrated battery TechnologyLiFePO4 Rated voltage (V)12.8 Capacity (Ah)2.5 ProtectionIntegrated BMS LED strip Light colourNeutral white (4000K) Luminous flux (lumen)approx. 300  FAQs about the M16 light module M72What does "self-sufficient complete solution" mean?Self-sufficient means that the light module already contains all the necessary components for operation (control, battery, light) and can be operated independently of a permanent external power supply. The integrated battery is charged as required and supplies the LEDs.Why is a LiFePO4 battery used?Lithium iron phosphate (LFP/LiFePO4) is the safest lithium-ion technology. It is extremely cycle-resistant (durable), thermally stable (no "thermal runaway") and does not require rare raw materials such as cobalt. It is the ideal choice for fixed, low-maintenance systems such as this module.What does "all mounting types except wall mounting" mean?This means that the module is designed for integration in or on objects. Typical examples are milling into a wooden panel (installation), screwing onto machine panelling (surface mounting) or fixing with clips in a profile (integration). It is not intended as a stand-alone luminaire mounted on a building wall.How is the module charged?The module is charged via a dedicated charging port with a suitable power supply unit or charging circuit. The exact specifications for the charging voltage and charging current are defined in the technical data sheet of the product. The integrated M72 board controls and protects the charging process.