Solar cable red 50m 6mm² IEC62930 – SOLR650 for high-performance PV systems

The Solar cable SOLS650 (50 metres, 6mm²) in black is the ideal cable by the metre for photovoltaic projects that demand the highest standards of efficiency and durability. With a length of 50 metres and a reinforced cross-section of 6mm², this cable provides perfect reserves for string cabling on house roofs or connecting distant module fields. The black colouring serves as a standard-compliant identification of the negative pole (-), which makes installation clear and minimises the risk of reversed polarity.Certified to the international standard IEC 62930, this cable meets the strictest requirements for use in modern PV systems up to 1500V DC. The generous cross-section ensures that even with high current from modern high-performance modules, the voltage drop is minimised and the total yield of your system is maximised.Highlights at a glanceMaximum efficiency: The 6mm² cross-section massively reduces electrical resistance and achieves minimal voltage drop, especially over distances of 50 metres.Certified safety: Complies with IEC 62930 standard (H1Z2Z2-K) for continuous use in photovoltaic DC systems up to 1500V.Optimum project length: 50 metres in one piece allow uninterrupted installation without additional connectors between the module field and inverter.Weather & UV resistant: The premium XLPO double insulation protects the cable for decades against embrittlement from sun, ozone and extreme weather conditions.Corrosion-protected conductor: Fine-stranded, tinned copper delivers best conductivity in the long run and effectively protects against oxidation, even in damp or salty environments.High thermal load capacity: Reliable operation in a wide temperature range from -40°C to +90°C.Areas of applicationThe SOLS650 is the ideal choice for demanding installation scenarios:Large roof systemsPerfect for connecting the solar modules to the inverter when this is installed in the basement or a distant technical room.High-performance balcony power plantsIdeal for systems with modern modules (500Wp+), to safely and losslessly transport the high currents.Island & battery storageExcellent for 24V or 48V systems where low voltage drops are crucial for optimal battery charging.Assembly & safety instructionsProfessional connectionFor assembly, use only high-quality MC4 connectors approved for 6mm² cross-sections. A precise crimp using a special solar crimping tool is essential.Mechanical fixingAttach the cable at regular intervals with UV-resistant cable ties to prevent mechanical stress due to wind or its own weight on the connections.Avoidance of induction loopsRoute the black negative cable as parallel and close as possible to the red positive cable to minimise electromagnetic interference fields and the risk of induction by lightning. Features Model / SKU**SOLS650** Conductor cross-section**6.0 mm²** Delivery form**50 metre ring** ColourBlack (negative pole) Rated voltageDC: 1.5 kV / Max. 1.8 kV Conductor materialCopper, tinned (class 5) Temperature range-40°C to +120°C (on the conductor) Certification**IEC 62930 / EN 50618** Special featureHalogen-free, UV-resistant & short-circuit-proof  FAQs about the solar cable black 50m 6mm²Why is 6mm² for 50 metres better than 4mm²?Because of the lower resistance.Over a distance of 50 metres, the electrical resistance adds up. With 6mm² you reduce the voltage drop by about a third compared to 4mm². This ensures higher system voltage at the inverter and thus measurably higher yield.Can the cable be laid freely outdoors?Yes.The cable is specially certified for permanent outdoor installation. It is resistant to UV light, ozone and ammonia, which also qualifies it for use in agriculture.Is the cable flame-retardant?Yes.The XLPO insulation is flame-retardant and halogen-free. In the event of fire, the cable hardly develops any smoke and no corrosive gases, which significantly increases building safety.

The Deye SE-G5.1Pro-B is a powerful battery module with 5.12 kWh storage capacity based on safe lithium iron phosphate technology (LiFePO₄). With its modular design, support for high-current applications and its flexibility in installation, it is the ideal solution for modern energy storage systems in private and commercial settings.Highlights at a glanceSafe & durable: Cobalt-free LiFePO₄ cells with intelligent BMS Modular and scalable: Up to 64 modules – max. 327 kWh storage capacity High compatibility: Suitable for wall mounting, floor mounting & 19" rack Easy maintenance: Automatic networking, remote monitoring & USB firmware updates Reliable operation: IP20, natural cooling, wide temperature range down to -20 °CCompact, scalable & intelligently networkedWith a single capacity of 5.12 kWh, the Deye SE-G5.1Pro-B is ideal for smaller storage solutions or as a module in large modular storage systems. Thanks to the possibility to connect up to 64 units in parallel, a maximum total capacity of 327 kWh is possible. Perfect for applications with increasing energy needs. Automatic network addressing as well as support for firmware updates via USB or remote access make commissioning and maintenance much easier.Flexible to mount – space-saving & installation-friendlyThanks to three mounting options, rack mounting (19 inch), wall mounting or floor installation, the module can be optimally positioned in almost any environment. With its compact form of only 133 mm height, it saves valuable space in technical rooms or living areas.Who is the Deye SE-G5.1Pro-B suitable for?Private households looking for a safe and future-proof storage system Commercial enterprises requiring scalable storage solutions for self-consumption or backup System integrators & installers who value easy integration and low maintenance  Sustainability-orientated users who rely on environmentally friendly storage technology ModelDEYSE-G5.1 Pro-B Battery typeLiFePO4 Module capacity (kWh)5.12 Module nominal voltage (V)51.2 Module capacity (Ah)100 System nominal voltage (V)51.2 System operating voltage (V)43.2-57.6 System capacity (kWh)5.12 System usable capacity (kWh)4.6 Charge/discharge current (A) - Recommendation50 Charge/discharge current (A) - Nominal value100 Charge/discharge current (A) - Peak discharge (2 min,25°C)150 Operating temperature (°C)Charge: 0 ~ 55 / Discharge: -20 ~ 60 LCD displaySOC%, Power, Total Voltage Communication portCAN2.0, RS485 Humidity5% ~ 90% Altitude≤2000m IP protection class of the housingIP65 Storage temperature (°C)0 ~ 35 Dimensions (W/D/H, mm)440 * 133 * 540 Weight (kg)45 Installation locationFloor mounting, rack mounting Recommended depth of discharge90% Cycle lifetime25 ± 2°C, 0.5C/0.5C, EOL70% ≥ 6000 Warranty10 years CertificationsUN38.3, IEC62619, CE,UK, VDE2510-50, CEI 0-21, FCC, UL1973, UL9540A  FAQs about the Deye SE-G5.1Pro-B battery storage unitHow much energy is actually usable?One module delivers 5.12 kWh gross capacity, of which around 4.6 kWh is usable at 90% depth of discharge, particularly suitable for private and commercial applications.What voltage and currents apply per module?The module operates at 51.2 V nominal voltage and 100 Ah capacity. The continuous current is 50 A, with up to 150 A possible for 10 seconds at peak.How many modules can be combined?In the IP20 version, up to 64 modules can be connected in parallel, giving a total capacity of over 327 kWh. For home use: six modules per stack, i.e. 30.7 kWh per unit.How long does the module last?The cells achieve over 6,000 cycles at 90 % DoD, with a residual capacity of at least 70 % at the end of life, so they are designed for long-term use.Which Deye inverters is the system compatible with?The battery is officially released for all three-phase hybrid inverters of the SUN-xK-HP3 and SUN-xK-BM series, fully plug-&-play enabled without additional modifications. Scope of delivery Deye SE-G5.1Pro-B rack battery module (5.12 kWh): Module typeThis is a single, flexible low-voltage battery module for installation in 19-inch racks, for wall mounting or floor mounting.1 x Deye SE-G5.1Pro-B battery module (5.12 kWh)The central storage unit with 5.12 kWh (100 Ah) in rack format, including an intelligent, integrated battery management system (BMS).1 x set of mounting handles / rack earsHandles for easier handling and for attaching the module in a 19-inch rack.1 x set of battery connection cables (plus & minus)A pair of pre-assembled high-performance cables for connecting the module (or the battery stack) to a compatible hybrid inverter.1 x communication cable (CAN/RS485)A data cable for communication between the battery module and the inverter.1 x parallel connection cable (power & communication)Short cables to connect the power and data bus of this module to another module.1 x earthing cableA protective conductor cable for proper earthing of the housing.1 x operating and installation manualA printed manual that describes the various installation methods (rack, wall, stack).2 x wall bracketsFor wall mounting of the battery pack 4 x feetFor stacking and securing the battery

The JA Solar JAM54D40 455/LB bifacial solar module is part of the Deep Blue 4.0 Pro series and has been developed for maximum energy yield, long service life and high efficiency. With the latest n-type technology, bifacial design and double-sided glass structure, the module is ideal for demanding private and commercial photovoltaic systems.Highlights at a glancePowerful: 455 W rated power with up to 22.6% module efficiencyBifacial energy yield: Rear side efficiency up to 80% (±5%)High reliability: Over 6,000 charge cycles at 70% EOL powerLow degradation: Only 0.4% power loss per year over 30 yearsRobust design: Double glass module with 1.6 mm glass thickness front and rearDurable: 25 years product warranty, 30 years performance guaranteeState-of-the-art n-type cell technologyThe module is based on n-type Bycium++ cell technology with 16 busbars (MBB half-cell). This reduces the power loss caused by light-induced degradation (LID) and ensures better performance in low light conditions as well as a higher overall energy yield.High performance under real conditionsThe JAM54D40 455/LB delivers strong performance not only under standard test conditions, but also at high ambient temperatures, low irradiation and when used bifacially. The bifacial rear-side absorption can achieve an additional yield of up to 30% with optimum installation.Robust construction for high loadsThe module is designed for a maximum static front load of 5400 Pa and a back load of 2400 Pa. The junction box is IP68 rated, ensuring a safe operation under a wide range of weather conditions. Suitable for applications from -40 °C to +85 °C.   Electrical parameters at STC Maximum rated power (Pmax) (W)455 Open-circuit voltage (Voc) (V)39.50 Maximum power voltage (Vmp) (V)33.00 Short-circuit current (Isc) (A)14.56 Maximum power current (Imp) (A)13.79 Module efficiency (%)22.8 Operating conditions Maximum system voltage1500V DC Operating temperature–40°C ... +85°C Maximum rated power of series fuse30A General data Dimensions (W / H / D)1762/1134/30mm Weight22 kg   Who is the JA Solar JAM54D40 455/LB suitable for?Installers and system planners focusing on performance and durabilityOperators of rooftop systems wanting to benefit from additional bifacial yieldCustomers looking for a visually appealing full black solution with high energy yieldProjects with demands for low degradation and high environmental resilienceFrequently asked questions (FAQ) about the JA Solar JAM54D40 455/LBWhat does "bifacial" mean for this module?The module uses bifacial cells that are light-sensitive on both the front and rear sides. This means that reflected light from the rear side can also be converted into electricity, which can increase energy yield by up to 30 percent depending on the installation environment.What is the difference between n-type and p-type cells?n-type cells, as in the JAM54D40 455/LB, have higher efficiency, lower light-induced degradation (LID) and better low-light performance compared to conventional p-type cells.How large is the module and how much does it weigh?The module measures 1134 × 1762 × 30 mm and weighs 22 kg. It features a double glass design with 1.6 mm glass thickness on the front and rear sides.How long is the warranty?JA Solar offers 25 years product warranty and 30 years linear performance guarantee with a maximum annual degradation of only 0.4 percent.Is the module suitable for use in extreme climate zones?Yes, the module is designed for operating temperatures from -40 °C to +85 °C and can withstand a front load of up to 5400 Pa and a back load of up to 2400 Pa. The junction box is rated to IP68.Which inverters is the module compatible with?The module is compatible with all standard inverters designed for a system voltage of up to 1500V DC. The junction boxes are equipped with MC4-EVO2 connectors.What is the best way to install the module?The module is suitable for both rooftop and ground-mounted systems. It can be installed in landscape or portrait format. The cable length is adapted to the orientation in each case.How robust is the module against environmental influences?Thanks to its glass-glass design and black aluminium frame, the module withstands extreme loads, designed for snow loads up to 5,400 Pa and wind loads up to 2,400 Pa. The rear foil and robust frame construction provide reliable protection against moisture and environmental influences.  

The Deye SUN-6K-SG05LP1-EU is an ultra-modern and powerful single-phase hybrid inverter that acts as an intelligent control centre for larger photovoltaic systems. It has been developed to offer you maximum independence, efficiency and security of supply. With a high output power of 6 kW, it manages the energy flows between your solar modules, the battery storage system and the public grid. Thanks to its integrated emergency power function, you are reliably supplied with high power even in the event of a power failure.Highlights at a glanceIntelligent hybrid system: Manages PV generation, battery storage and grid consumption for maximum self-consumption.High performance: With 6 kW output power ideal for larger households, heat pumps or small commercial operations.Integrated emergency power supply: Provides an uninterruptible power supply (UPS level) in the event of a grid failure.Two MPP trackers: Enables the connection of two independent module arrays, ideal for east-west roofs or partial shading.Flexible battery connection: Compatible with a wide range of 48V low-voltage battery storage systems.Comprehensive monitoring: Integrated WLAN module for simple and intuitive system monitoring via app.Intelligent energy management for your homeThe Deye hybrid inverter is more than just a converter from direct current to alternating current. It is the brain of your energy supply. During the day, it supplies your consumers directly with solar power, while surplus energy is stored in your battery storage system for the night or for cloudy days. The energy is only fed into the public grid when the storage system is full and no consumer requires electricity. This maximises your self-consumption and significantly reduces your electricity costs.Maximum yields through flexible PV connectionThanks to the two integrated MPP trackers (Maximum Power Point), the Deye SUN-6K offers maximum flexibility when planning your PV system. You can connect two separate module strings with different orientations (e.g. east and west side of the roof) or with different module types. Each tracker optimises the output of its string individually so that you always achieve the maximum possible energy yield, even with complex roof situations or partial shading.Independence through integrated emergency power supplyA special feature of this inverter is the integrated emergency power function. If the public power grid fails, the device switches to a separate emergency power output in less than 10 milliseconds and continues to supply selected critical loads such as lighting, refrigerators or the IT infrastructure with power from the battery storage system. This switchover time to UPS level (uninterruptible power supply) ensures maximum security of supply. Characteristics  ModelDeye SUN-6K-SG05LP1-EU Battery input data Battery typeLead-acid or Li-lon Battery voltage range (V)40~60 Max. Charging current (A)140 Max. Discharge current (A)140 Number of battery inputs1 Charging strategy for Li-Ion batterySelf-adaptation to BMS Input data of the PV string Max. DC input power (W)7800 Rated PV input voltage (V)370 Starting voltage (V)80 MPP voltage range (V)125-425 Max. DC input voltage (V)550 PV input current (A)13+22 Max. PV short-circuit current (A)17+28.6 Number of MPPT2 Strings per MPPT1+2 AC output data AC rated power and UPS power (W)6000 Max. AC output power (W)6600 Rated AC output current (A)27.3 Maximum rated AC output current (A)30 Max. Continuous AC throughput (A)40 Peak power (without grid)2-fold rated power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current feed-in<0.5% ln Efficiency Max. efficiency97,60% Euro efficiency97,00% MPPT efficiency>99% Protection FusesIntegrated lightning protection, anti-islanding, reverse polarity protection, short-circuit protection, overload protection, and much more. Overvoltage categoryDC Type II/AC Type II Certifications and standards Grid approvalsVDE4105, IEC61727/62116, VDE0126, EN50549-1, CEI 0-21, AS4777, NRS2017, G98, G99, etc. Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range ( ℃ )-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<30 dB Communication with BMSRS485; CAN Weight (kg)15 Size (mm)330B×580H×232T Degree of protectionIP65 RATING Installation styleWall bracket Guarantee10 years  FAQs about the Deye SUN-6K-SG05LP1-EU hybrid inverterWhat exactly does "hybrid inverter" mean?A hybrid inverter can manage energy from several sources simultaneously. It is the link between the solar modules, the battery storage system and the public grid. It decides intelligently whether the solar power generated is consumed directly, stored in the battery or fed into the grid.Who is a 6 kW inverter suitable for?A 6 kW inverter is ideal for larger single-family homes with a higher power consumption, for example due to the operation of a heat pump or an electric car. It is also suitable for small businesses or farms that want to optimise their own consumption.Which batteries are compatible with this inverter?The Deye SUN-6K is designed for operation with 48V low-voltage (LV) lithium-ion battery storage systems. It is compatible with many leading manufacturers. The exact compatibility list can be found on the manufacturer's website.Do I need additional devices for the emergency power function?The inverter has an integrated emergency power output (EPS port). To use it, the emergency power consumers to be supplied must be placed on a separate circuit by a qualified electrician and connected to this output. An additional external changeover switch is generally not required. Scope of delivery: Deye SUN-6K-SG05LP1-EU (6 kW 1-phase hybrid inverter) 1 x Deye SUN-6K-SG05LP1-EU InverterA powerful single-phase hybrid inverter with 6 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA robust metal mounting rail for securely fastening the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the Internet for remote monitoring via Deye Cloud or Solarman App.1 x current transformer (CT)An external folding current transformer for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4 compatible)The required pairs of DC plugs (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x User manualA printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SE-F16 is a high-capacity low-voltage energy storage system (51.2 V) designed for demanding private and commercial photovoltaic applications. With an enormous nominal capacity of 16 kWh (314 Ah) in just a single compact case module, this storage unit significantly minimises space requirements and installation effort.This model uses proven and intrinsically safe lithium iron phosphate (LiFePO4) cell chemistry. In combination with the intelligent battery management system (BMS) and extensive monitoring options (including Bluetooth), the SE-F16 offers maximum safety, scalability and longevity for autonomous energy supply to your home or business.Highlights at a GlanceMassive storage capacity (16 kWh): With 314 Ah nominal capacity at 51.2 V, this single module provides enough energy to reliably supply large households even during longer sunless periods.Safe LiFePO4 cell chemistry: The lithium iron phosphate technology guarantees maximum thermal stability and almost completely eliminates the risk of thermal runaway (fire hazard).Powerful power handling: The system supports an enormous continuous discharge current of up to 230 A and peak currents of 280 A (for 10 seconds), ideal for power-hungry large consumers such as heat pumps or wallboxes.Extreme scalability: Up to 32 units can be connected in parallel as standard for even greater energy needs. With a CAN bridge, scaling up to 64 modules is possible.Smart monitoring & connectivity: In addition to CAN2.0 and RS485, the storage unit features Bluetooth for convenient monitoring via smartphone app. The "C" version (SE-F16-C) also has an integrated LCD display.Durability & efficiency: Certified for over 6,000 charge cycles (at 25°C), which ensures reliable operation for decades in daily use.Flexible installation: Despite the high weight, the case system is extremely flexible and can be installed on the wall, floor-standing, or stacked.Areas of ApplicationThe Deye SE-F16 is the perfect solution for demanding energy scenarios:Single-family and multi-family homes: Maximises the self-consumption of PV electricity and, in combination with a hybrid inverter, provides powerful emergency power for the entire building.Commercial applications (C&I): Used to cap expensive load peaks (peak shaving) and store large PV surpluses in agricultural or commercial operations.Off-grid & island systems: Thanks to its gigantic capacity and high continuous discharge performance, provides a reliable energy source for totally off-grid properties.Installation & Safety InstructionsLogistics and weight: At 109 kg, the module is extremely heavy. Transport must always be carried out with suitable lifting equipment (stair climber) or by at least two to three people.Choice of site: The storage unit must be installed in a dry and ideally frost-free room (protection class IP21). Charging at temperatures below 0°C is automatically blocked by the BMS to protect the cells.Cable cross-sections: Due to the extremely high currents (up to 230 A continuous load), the connection cables to the inverter or busbar must have a cross-section of at least 70 mm², preferably 95 mm², to avoid overheating and voltage losses.Commissioning with parallel connection: When connecting several SE-F16 modules together, all units must be charged to exactly the same voltage level prior to cabling in order to avoid dangerous equalisation currents. Features  ModelDeye SE-F16 (Series C with display) Technology**LiFePO4** (lithium iron phosphate) Nominal voltage**51.2 V** (operating range: 44.8 V - 57.6 V) Nominal capacity**314 Ah** Nominal energy**16.0 kWh** Max. continuous current**230 A** (peak current 280 A for 10s) Cycle life**≥ 6000 cycles** (at 90% DOD and 25°C) CommunicationCAN 2.0 / RS485 / Bluetooth + App (incl. LCD display) Dimensions (W x D x H)approx. 400 x 233 x 708 mm Weightapprox. **109 kg** Mounting typeFloor-mount, wall-mount or stacked  H2: FAQs about the Deye SE-F16What is the difference between the SE-F16 and the SE-F12?The main difference is in capacity and housing height. The SE-F16 delivers 16 kWh (314 Ah) and weighs around 109 kg, while the SE-F12 offers 11.8 kWh (230 Ah) and weighs about 84 kg. Both use the same 51.2 V architecture and are designed for identical applications, but the F16 provides significantly more autonomy per installed module.What does the "C" stand for in the model name SE-F16-C?The suffix "-C" in Deye storage refers to the extended model variant, which, in addition to Bluetooth monitoring, is also equipped with an integrated LCD display on the front of the case. This allows the current state of charge (SoC), cell voltages, and warnings to be read directly on the device without having to open the app.Do I necessarily need a Deye inverter for this battery?No, but it is strongly recommended for smooth operation. The SE-F16 is "plug & play" compatible with Deye low-voltage hybrid inverters (such as the SG04 series), since the BMS protocol matches natively. For third-party brands (such as Victron, SMA, or Solis), communication must first be configured manually using DIP switches or software settings.