Solar extension cable 12m 4mm² - red/black for solar systems (set)
Description
Product information
With this solar extension cable set (12 metres, 4mm²) you can also safely and weatherproof bridge larger distances between your solar modules and the inverter or charge controller. The length of 12 metres offers you maximum flexibility, for example to optimally align modules to the sun on a garden shed, garage or far away in the garden, while the technology remains protected in the house.
The set includes two double-insulated solar cables (1x red for plus, 1x black for minus), already assembled with MC4-compatible plugs and sockets. Despite the considerable length, the high-quality conductor cross-section of 4mm² made of tinned copper ensures reliable power transmission. The sheathing is specially designed for permanent outdoor use and withstands UV radiation, heat, cold and moisture for many years.
Highlights at a glance
- Extra range: 12 metres of cable length enable flexible installations even in difficult structural conditions or long routes through the garden.
- Ready for immediate use: Pre-assembled on both sides with standard MC4-compatible connectors (Plug & Play) – no crimping required.
- Safety colour code: The set of red (+) and black (-) virtually excludes confusion when connecting and protects your expensive electronics.
- High-quality material: Tinned copper (4mm²) provides good corrosion protection and low line losses.
- Weatherproof (IP67): The connectors are dust-tight and waterproof when plugged in, ideal for rain and snow.
- Durable: The special insulation is resistant to UV radiation, ozone, acids and alkalis and is temperature-resistant from -40°C to +90°C.
Areas of application
The 12 metre extension solves installation problems for long distances:
- Garden shed & garage: If the modules are on the outbuilding but the inverter or storage is accommodated in the main house.
- Shading optimisation: Allows the placement of the modules far from shade-providing trees or buildings.
- Façade installation: For neat routing of the cables from the façade to the plant room or cellar.
- String extension: To electrically connect module fields that are structurally separated (e.g. on two different sides of a roof).
Installation & safety instructions
- Note voltage drop: With 12 metres (24m current path there and back), a physically caused resistance arises. For standard modules (up to around 10–15A), 4mm² is perfectly sufficient. However, if you are planning high-performance strings with very high currents (>20A), you should check the voltage drop.
- Strain relief: Due to the weight of 12m cable, the connectors on the module should not be under tension. Fix the cable to the frame with cable ties.
- Mechanical protection: With this length, the cable often runs over edges or through the garden. Be sure to use protective conduit (duct) at abrasive points or for underground installation.
- Connection: Firmly press the connectors together until a clear "click" is heard. A loose connection can get hot.
Properties
| Product name | Solar extension cable set (12 m) |
| Cable length | **12.0 metres** (per cable) |
| Cable cross-section | **4.0 mm²** |
| Rated voltage | **1500 V DC** |
| Max. operating current | up to **30 A** (depending on environment) |
| Plug type | **MC4-compatible** |
| Conductor material | Copper (fine stranded, tinned) |
| Protection type | **IP68** (dust and waterproof) |
| Operating temperature | **-40°C to +90°C** |
| Colour | 1x red (+), 1x black (-) |
FAQs about the solar extension cable 12m
Is the power loss already too high at 12 metres?
No, not for typical applications. With a typical balcony system or a string with e.g. 10 amps, the voltage drop at 12 metres (4mm²) is about 1.5 to 2 volts. This corresponds to a loss of around 1-2%, which is absolutely within the acceptable range. Only in extreme low-light or very high current situations would a 6mm² cable be more advantageous.
Can I also install the cable indoors?
Yes, absolutely. The cables are designed for rugged outdoor use (UV/weather), but can also be safely used indoors, in cable ducts, or behind drywall. They are halogen-free and flame-retardant.
Do the connectors fit every inverter?
Usually, yes. Almost all modern PV modules and microinverters (e.g. Hoymiles, Deye, NEP) use the MC4 standard (or compatible types such as TS4). The connections on this cable are mechanically and electrically suitable for them.Properties
| Cross-section of the conductor: | 4.00 mm² |
|---|
Reviews 0
Login
Customers also bought
The JA Solar JAM54D40 455/LB bifacial solar module is part of the Deep Blue 4.0 Pro series and has been developed for maximum energy yield, long service life and high efficiency. With the latest n-type technology, bifacial design and double-sided glass structure, the module is ideal for demanding private and commercial photovoltaic systems.Highlights at a glancePowerful: 455 W rated power with up to 22.6% module efficiencyBifacial energy yield: Rear side efficiency up to 80% (±5%)High reliability: Over 6,000 charge cycles at 70% EOL powerLow degradation: Only 0.4% power loss per year over 30 yearsRobust design: Double glass module with 1.6 mm glass thickness front and rearDurable: 25 years product warranty, 30 years performance guaranteeState-of-the-art n-type cell technologyThe module is based on n-type Bycium++ cell technology with 16 busbars (MBB half-cell). This reduces the power loss caused by light-induced degradation (LID) and ensures better performance in low light conditions as well as a higher overall energy yield.High performance under real conditionsThe JAM54D40 455/LB delivers strong performance not only under standard test conditions, but also at high ambient temperatures, low irradiation and when used bifacially. The bifacial rear-side absorption can achieve an additional yield of up to 30% with optimum installation.Robust construction for high loadsThe module is designed for a maximum static front load of 5400 Pa and a back load of 2400 Pa. The junction box is IP68 rated, ensuring a safe operation under a wide range of weather conditions. Suitable for applications from -40 °C to +85 °C. Electrical parameters at STC Maximum rated power (Pmax) (W)455 Open-circuit voltage (Voc) (V)39.50 Maximum power voltage (Vmp) (V)33.00 Short-circuit current (Isc) (A)14.56 Maximum power current (Imp) (A)13.79 Module efficiency (%)22.8 Operating conditions Maximum system voltage1500V DC Operating temperature–40°C ... +85°C Maximum rated power of series fuse30A General data Dimensions (W / H / D)1762/1134/30mm Weight22 kg Who is the JA Solar JAM54D40 455/LB suitable for?Installers and system planners focusing on performance and durabilityOperators of rooftop systems wanting to benefit from additional bifacial yieldCustomers looking for a visually appealing full black solution with high energy yieldProjects with demands for low degradation and high environmental resilienceFrequently asked questions (FAQ) about the JA Solar JAM54D40 455/LBWhat does "bifacial" mean for this module?The module uses bifacial cells that are light-sensitive on both the front and rear sides. This means that reflected light from the rear side can also be converted into electricity, which can increase energy yield by up to 30 percent depending on the installation environment.What is the difference between n-type and p-type cells?n-type cells, as in the JAM54D40 455/LB, have higher efficiency, lower light-induced degradation (LID) and better low-light performance compared to conventional p-type cells.How large is the module and how much does it weigh?The module measures 1134 × 1762 × 30 mm and weighs 22 kg. It features a double glass design with 1.6 mm glass thickness on the front and rear sides.How long is the warranty?JA Solar offers 25 years product warranty and 30 years linear performance guarantee with a maximum annual degradation of only 0.4 percent.Is the module suitable for use in extreme climate zones?Yes, the module is designed for operating temperatures from -40 °C to +85 °C and can withstand a front load of up to 5400 Pa and a back load of up to 2400 Pa. The junction box is rated to IP68.Which inverters is the module compatible with?The module is compatible with all standard inverters designed for a system voltage of up to 1500V DC. The junction boxes are equipped with MC4-EVO2 connectors.What is the best way to install the module?The module is suitable for both rooftop and ground-mounted systems. It can be installed in landscape or portrait format. The cable length is adapted to the orientation in each case.How robust is the module against environmental influences?Thanks to its glass-glass design and black aluminium frame, the module withstands extreme loads, designed for snow loads up to 5,400 Pa and wind loads up to 2,400 Pa. The rear foil and robust frame construction provide reliable protection against moisture and environmental influences.
The OLight Baton 3 Pro is a powerful yet compact LED torch designed as a reliable all-round tool for everyday professional use. It offers an excellent balance of high light output, long runtime and a handy size that makes it easy to carry in a trouser or jacket pocket. Equipped with intelligent features such as a proximity sensor and flexible mounting options, the Baton 3 Pro is the ideal choice for trade, industry and security services.Highlights at a glanceHigh performance in compact format: Up to 1,800 lumens and a lighting range of 175 metres.Long runtime: Powered by a powerful, rechargeable 18650 lithium-ion battery.Intelligent protection sensor: Automatically reduces brightness when objects are close by to prevent overheating.Flexible mounting: Removable two-way clip and magnetic end cap for hands-free work.Easy charging: Proven magnetic charging connector at the end of the lamp for convenient charging.Powerful in professional applicationsThe Baton 3 Pro is the perfect companion for a wide range of professional activities. For craftsmen and industrial technicians it is a robust and bright tool that fits easily into any tool bag and ensures clear light for inspections. security services appreciate it as a powerful but unobtrusive service torch for patrol duty, providing enough power to illuminate larger areas. In facility management and for caretaker services it is a versatile all-round tool for daily checks and maintenance.Advanced technology for reliable useAt the heart of the Baton 3 Pro is a high-performance LED, which, in combination with a special TIR lens, produces a broad and even beam of light ideal for close and medium range work. The supplied 3200mAh 18650 battery ensures a superior runtime. An intelligent proximity sensor is integrated as a professional safety feature: it detects if an obstacle is directly in front of the lens and automatically lowers the output to prevent heat damage and glare.Sophisticated design for everyday professional lifeThe Baton 3 Pro has been optimised for easy and safe handling. The enlarged and slightly recessed side switch can be operated effortlessly even when wearing work gloves. The detachable two-way clip allows the torch to be carried in a pocket (with the head up or down) or attached to the brim of a cap. The strong magnetic end cap and the supplied L-shaped stand enable flexible positioning as a stationary work light. Features ModelOLight Baton 3 Pro Product typeProfessional LED torch Max. light output (lumens)1500 Max. beam distance (metres)175 Light intensity (candela)7900 Power supply1x 18650 Li-Ion battery, 3200 mAh Charging typeMagnetic charging connector (MCC3) Water resistanceIPX8 Housing materialAluminium alloy Dimensions (L x Ø, mm)101.4 x 23 Weight (g)approx. 103 (incl. battery) Special featuresProximity sensor, magnetic end cap FAQs about the OLight Baton 3 ProWhat is the main difference between the Baton 3 Pro and the Baton 3 Premium Edition?The Baton 3 Pro is a larger and more powerful, stand-alone torch with an 18650 battery for longer runtimes. The Baton 3 Premium Edition is a system consisting of a smaller, ultra-compact torch and a portable charging case that can recharge the torch several times on the go.How does the proximity sensor work?The sensor detects when an object is directly in front of the lens and automatically dims the light to a lower level. This prevents overheating if it is accidentally activated in a pocket and protects the user from strong glare when working close up.What is the supplied L-shaped stand for?The stand is a practical storage solution. It can be mounted on a wall or placed on a flat surface. The torch adheres to it magnetically and is therefore always within easy reach and in one fixed place.How can I check the battery level?A three-colour LED display is integrated into the side switch. It lights up briefly after switching on and indicates the charge status: green (over 60%), orange (10-60%) or red (under 10%).Is the two-way clip useful for professional users?Yes, the clip is extremely versatile. Not only does it allow for deep and secure carrying in a pocket, but it also allows attachment to the brim of a cap, turning the torch into an improvised headlamp for hands-free work.