Eisemann Charging station LS HSE 7 LED - Intelligent charging and holder technology (12V/24V/230V)
Description
Product information
The Eisemann Charging Station LS HSE 7 LED (or LS HS 7 LED) is the indispensable accessory to always keep your explosion-protected portable searchlight ready for use and safely stored. It functions not only as an intelligent charger but also as an extremely robust wall and vehicle mount.
This station is specially matched to the internal lead-fleece battery of the 7 series headlamps (HSE 7 LED, HS 7 LED as well as the older halogen models). With its flexible input voltage, it integrates seamlessly into the on-board networks of emergency vehicles or into the regular 230V domestic network. The microprocessor-controlled charging electronics guarantee maximum service life of the headlamp battery.
Highlights at a glance
- Multi-voltage compatibility: The charging station can be flexibly operated on 230V mains voltage (in buildings) or on 12V/24V on-board voltages (fire engines, trucks, cars).
- Microprocessor-controlled charging technology: Ensures optimal, gentle charging of the lead-fleece battery and automatically switches to trickle charge once the battery is full (overcharge protection).
- Vibration-proof vehicle mounting: The housing also serves as a secure vehicle mount. The headlamp locks firmly in place and withstands the extreme vibrations and centrifugal forces of emergency vehicles.
- Optical charge control: Integrated LEDs clearly indicate the current operating and charging status (charging, full, fault) at a glance.
- Compact & robust design: Space-saving and impact-resistant design, which can be easily mounted in the tight equipment rooms of modern fire-fighting vehicles or on narrow workshop walls.
Fields of application
- Emergency vehicles (BOS): Fixed installation in fire, THW or rescue service vehicles for permanent charging on the 12V/24V vehicle network.
- Industry & workshops: Wall mounting in supervisor offices, factory halls or control rooms in conjunction with the 230V power supply.
- Guardrooms & security services: As a permanent supply station for patrols, where the lamp is permanently charged when not in use.
Installation & safety instructions
- Observe charging location (ATEX): Although the hand-held searchlight (HSE 7) itself is explosion-proof, the charging station does not have ATEX approval. It must never be installed or operated in an area at risk of explosion. Charging must without fail take place in a safe environment!
- Continuous charging is recommended: The headlamp should remain in the station when not in use. The electronics prevent the battery from boiling over and protect it from damaging sulphation by trickle charging.
- Vehicle installation: Secure the 12V/24V supply line in the vehicle wiring with a suitable fuse to prevent short circuits or cable fires in the event of a broken wire.
Features
| Model | Eisemann Charging Station LS 7 LED (Art. 071175) |
| Compatibility | Hand-held searchlight HSE 7 LED and HS 7 LED |
| Input voltage (Mobile) | 12 V to 30 V DC (For car and truck electrical systems) |
| Input voltage (Stationary) | 110 V to 240 V AC (50/60 Hz) |
| Charging procedure | Microprocessor controlled (with trickle charge) |
| Automatic cut-off (Vehicle protection) | Yes (Interrupts charging at < 11.7 V or < 23.5 V of the car battery) |
| Emergency lighting function | Yes (Can be activated / deactivated) |
| Explosion protection | Not explosion-protected! (Mounting only outside ATEX zones) |
| Protection class | II (Protectively insulated) |
| Mounting type | Wall mounting (building) or fixed screwing in the vehicle |
FAQs on the LS HSE 7 LED charging station
Are the 230V mains adapter and the vehicle cable automatically included in the scope of delivery?
That depends on the selected article number (set). Often only the charging base is sold, while the 230V plug-in power supply unit or the vehicle connection cable (with open ends or cigarette lighter plug) have to be chosen separately as accessories. Pay attention to the exact scope of delivery from your dealer.
Does the old Eisemann halogen headlamp (HSE 7 without LED) also fit in this station?
Yes. The mechanical housing shape of the Eisemann 7 series (HS 7, HSE 7, HS 7 LED, HSE 7 LED) is identical at the bottom. The contacts fit exactly, and the charging electronics for the internal lead-acid battery also reliably charge the older models.
How do I know that the battery is fully charged?
The charging station has LEDs on the front. As a rule, a red light indicates the active charging process. As soon as this changes to a continuous green light, the battery is full and the station has switched to safe trickle charge mode.
Properties
| Power supply: | 230V, 12&24 V/DC |
|---|
Documents 1
Reviews 0
Login