Deye GE-F60 - State-of-the-art energy storage solution for residential and commercial applications

To order this product, please log in here.

Product number: DEYGE-F60

EAN: 2900000005808

Length: 1056 mm

Width: 780 mm

Height: 2235 mm

Weight: 1200 kg

Product information

The Deye GE-F60 series stands for the next generation of intelligent high-voltage energy storage. It combines powerful lithium iron phosphate technology (LiFePO₄) with an integrated energy management system, providing a reliable, safe and scalable solution for energy storage, both for private and industrial applications.

Highlights at a glance

All-in-one system: Integrated EMS, hybrid inverter & BMS
Black start capable & off-grid suitable: Automatic restart in the event of grid failure
High efficiency and service life: Over 6000 charge cycles with minimal capacity loss
Scalable up to 600 kWh & 500 kW: Flexible expansion for growing requirements
IP55 certified: Dust and water jet protected for a wide variety of areas of use

Intelligent energy management for maximum autonomy

The GE-F60 series is a fully integrated energy storage system with EMS (energy management system), hybrid inverter and smart BMS. This allows energy flows to be controlled efficiently, storage targets to be defined and self-consumption to be optimised, both grid-connected and off-grid.

The system is black start capable and can automatically restart after a power failure without external power supply, ideal for emergency power supply in critical applications.

Safety & protection at the highest level

The GE-F60 sets new standards in terms of safety:

Active gas/smoke/temperature monitoring
Aerosol fire extinguishing system in the module & complete system
Redundant power supply for maximum failure safety
Intelligent cell balancing and automatic error detection

Scalable for any application

The basic system includes 12 modules each with 5.12 kWh, resulting in a total capacity of 61.44 kWh (55.29 kWh usable). Depending on the application, battery capacity can be expanded up to 360 kWh. Up to 10 systems can be connected in parallel on the AC side, making it well-suited for large commercial or industrial projects.

Who is the Deye GE-F60 suitable for?

Private households aiming for maximum energy independence
SMEs & industrial plants, requiring stable power supply and peak load management
Emergency power systems requiring fail-safe operation and black start capability
PV projects with high output and storage requirements
Off-grid systems, e.g. for remote buildings or island grids

Model	DEYGE-F60
Battery type	LiFePO4
Module capacity (kWh)	5.12
Module nominal voltage (V)	51.2
Module capacity (Ah)	100
Number of battery modules in series (optional)	12
System nominal voltage (V)	614.4
System operating voltage (V)	480-700
System capacity (kWh)	61.44
System usable capacity (kWh)	55.29
Charge/discharge current (A) - recommendation	50
Charge/discharge current (A) - nominal value	100
Charge/discharge current (A) - peak discharge (2 min, 25°C)	125
Operating temperature (°C)	Charging: 0 ~ 55 / Discharging: -20 ~ 55
LCD display	SOC%, Power, Total Voltage
Communication port	CAN2.0, RS485
Humidity	5% ~ 90%
Altitude	≤2000m
IP protection class (enclosure)	IP65
Storage temperature (°C)	0 ~ 35
Dimensions (W/D/H, mm)	780 * 1056 * 2235
Weight (kg)	1200
Installation location	Floor mounting
Recommended depth of discharge	90%
Cycle life	25 ± 2°C, 0.5C/0.5C, EOL70% ≥ 6000
Warranty	10 years
Certifications	CE, IEC62619, IEC62040, UN38.3

FAQs about the Deye GE-F60 energy storage solution

How much energy is available with full equipment?

One tower with 12 modules delivers 61.44 kWh gross. With a depth of discharge of 90 %, about 55.29 kWh of this is usable.

Which voltages and currents apply?

The nominal system voltage is 614 V. The operating range extends from 480 to 700 V. Continuous discharge current is specified as 100 A, with up to 125 A possible for short periods.

How far can the system be scaled?

For larger commercial or industrial applications up to six GE-F60 units can be operated in parallel. This enables total capacities up to 360 kWh.

Which inverters is the system compatible with?

The GE-F60 is fully preconfigured for hybrid inverters of the SUN-29.9K/30K/35K-SG01HP3-EU-BM3 and SUN-40K/50K-SG01HP3-EU-BM4 series. The appropriate CAN profile (code 00) is stored ex works, so manual configuration is not required.

What protective functions are integrated?

The safety concept includes gas and smoke detection, active pressure relief, an integrated aerosol extinguishing cartridge as well as automatic shutdown within three seconds. These measures specifically address common concerns when installing indoors or in the basement.