VISION lead-acid battery 6FM45DX with 12V and 50Ah
Description
Product information
The Vision 6FM45DX is a robust, cycle-proof lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 50 ampere hours (at 20h rate). It is specially designed for demanding applications with recurring charging and discharging cycles. Thanks to the AGM technology (Absorbent Glass Mat), this battery provides reliable, leak-proof and long-lasting power. It is the ideal solution for systems that require high cycle stability, deep discharges and long service life, and is excellently suited for both cyclic and standby operation.
Highlights at a Glance
- Cycle-proof: Developed for a high number of charge and discharge cycles, which significantly increases service life compared to conventional VRLA batteries.
- High capacity: 50 Ah at 12 V (20-hour rate) or 45 Ah (10-hour rate) for long-lasting energy supply.
- Maintenance-free: Thanks to leak-proof AGM technology.
- Low self-discharge: Only about 3% loss of capacity per month at 20 °C.
- Flexible installation: Operation possible in various positions, except for permanent overhead installation.
- Durable: Service life of up to 10 years in the design life.
Strong Performance for Cyclic Applications
The 6FM45DX reliably delivers power in recurring discharge cycles. Its capacity is 50 Ah at a 20-hour discharge and 45 Ah at a 10-hour discharge. Thanks to the special lead-calcium-tin alloy of the grids, it allows for high cycle stability and excellent recovery after deep discharge.
Robust Technology for Demanding Environments
Thanks to the VRLA technology with AGM system, the 6FM45X is absolutely maintenance-free and leak-proof. The electrolyte is safely bound in a glass fibre mat, which allows for safe handling and operation in any position. The battery has self-closing low pressure relief valves that ensure equalisation of pressure within the cells. The housing is made of robust ABS plastic, which is impact and break resistant and, on request, is available in a flame-retardant version (UL94:V0). The low self-discharge of about 3% per month enables long-term storage with high readiness for use.
Features
| Model | Vision 6FM45X |
| Battery type | VRLA AGM |
| Nominal voltage (V) | 12 |
| Capacity (Ah) | 50 (at 20h rate) |
| Max. discharge current | 450 A (for 5s) |
| Charge voltage (float charge) | 13.6 V to 13.8 V |
| Charge voltage (cyclic operation) | 14.4 V to 14.7 V |
| Operating temperature (°C) | Charge: -10 ~ 60 / Discharge: -20 ~ 60 |
| Service life | up to 10 years (design life) |
| Dimensions (L/W/H, mm) | 197 x 165 x 170 |
| Weight (kg) | 14.6 |
| Connection | M6 screw clamp |
| Certifications | ISO9001, ISO14001, UL |
FAQs about the VISION 6FM45DX Lead-acid Battery
For which applications is the 6FM45DX best suited?
This battery has been specially developed for cyclic applications in which the battery is regularly discharged and recharged. It is ideally suited as the main power supply for electric vehicles such as wheelchairs and golf caddies, as well as for use in solar systems, telecommunication systems, UPS systems and mobile measuring devices. The battery also has VdS approval, making it optimal for safety-critical applications such as fire and burglar alarm systems.
What does "cycle-proof" mean?
A cycle-proof battery is specially designed to handle a high number of charge and discharge cycles without significantly losing its capacity or service life. This distinguishes it from conventional lead-acid batteries, which are more suited for standby operation.
How do I charge the battery correctly?
We recommend using a charger designed for AGM batteries with a capacity of 50 Ah. Follow the charging voltages recommended by the manufacturer: 13.6 V to 13.8 V for float charging and 14.4 V to 14.7 V for boost charging. Charging current that is too high can reduce battery life.
How long does the 6FM45DX battery last?
The expected service life of the battery is up to 10 years at 20°C in design life. However, the actual service life depends heavily on the individual operating conditions, depth of discharge and ambient temperature.
Properties
| Capacity: | 45Ah |
|---|---|
| Tension: | 12V |
Documents 1
Reviews 0
Login
Customers also bought
The Vision CP1223 is a high-quality, valve-regulated lead acid battery (VRLA) with 12 volt nominal voltage and 2.3 Ah capacity. This compact and reliable all-purpose battery has been designed for a long service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery offers safe and reliable energy provision for a wide variety of applications, particularly in security and medical technology.Highlights at a glanceCompact energy: 2.3 Ah capacity at 12 V for reliable energy provision in restricted spaces.Long service life: Designed for a lifetime of up to 5 years in standby operation (float) at 20 °C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Reliable performance: Offers a stable voltage position and low self-discharge.Flexible installation: Operation is possible in all positions except permanent upside-down use.Tested quality: Manufactured according to the highest quality standards, ideal for use in safety-relevant devices.Powerful performance for versatile applicationsThe Vision CP1223 delivers a nominal capacity of 2.3 Ah with a 20 hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its area of application ranges from alarm systems and UPS systems to mobile medical devices where constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely absorbed in a glass fibre mat, the CP1223 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge of less than 3% per month enables long storage life with high availability. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Features ModelVision CP1223 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)2.3 (at 20h rate) Maximum discharge current34.5A (for 5 seconds) Charging voltage (maintenance charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charging: 0 ~ 40 / Discharging: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)178 x 35 x 66 Weight (kg)approx. 0.9 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP1223 lead-acid batteryFor which applications is the CP1223 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Smaller uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devices (e.g. monitors, pumps)Model making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. There is no need to refill with distilled water and it is protected against leaks.What is the service life of the CP1223?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20 °C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my alarm system?Yes, the Vision CP1223 is a very common replacement battery for many alarm systems and emergency lighting systems. Please compare the voltage (12V), capacity (2.3Ah), dimensions and connector type (Faston 4.8 mm) with your old battery before purchasing to ensure compatibility.What are the charging parameters for this battery?Float charge: The recommended voltage at 20 °C is between 13.5 V and 13.8 V.Cycle charge: For occasional cyclic charging, a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 0.69 A in order to maximise the battery’s service life.What does the Faston 187 connector mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inches). Cables are simply pushed onto these contacts, enabling quick and tool-free installation.
The Vision CP1270 is a high-quality, valve-regulated lead-acid battery (VRLA) with 12 Volt nominal voltage and 7 Ah capacity. This extremely versatile and reliable all-purpose battery is designed for a long service life in standby operation as well as for light cyclic requirements. Equipped with maintenance-free AGM technology, this battery provides safe and consistent power for a wide range of applications, from emergency backup in UPS systems to safety-critical alarm systems.Highlights at a glanceUniversal capacity: 7 Ah at 12 V for reliable power in standard applications.Long service life: Designed for a lifespan of up to 5 years in standby operation (float) at 20°C.Maintenance-free: Fully sealed AGM technology with efficient gas recombination makes maintenance unnecessary.Compact design: Fits in most standard installation spaces for batteries of this power class.Flexible installation: Operation is possible in all positions, except for permanent upside-down use.Tested quality: Manufactured to the highest quality standards, often with UL certification for use in safety-relevant devices.Powerful performance for versatile applicationsThe Vision CP1270 delivers a nominal capacity of 7 Ah with a 20-hour discharge. It is optimised as a general purpose battery for standby parallel operation, but is also suitable for applications with occasional charge and discharge cycles. Its areas of use range from alarm systems and small UPS systems to emergency lighting and medical technology, where a constant and fail-safe power supply is essential.Robust technology for demanding environmentsThanks to the VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), in which the electrolyte is completely bound in a glass fibre mat, the CP1270 is absolutely maintenance-free and leak-proof. This ensures safe operation even in sensitive electronic environments. The low self-discharge rate of less than 3 % per month enables long storage capability with high availability. The robust ABS plastic housing provides excellent protection against shocks and vibrations.Features ModelVision CP1270 Battery typeVRLA AGM (standby / general purpose) Rated voltage (V)12 Capacity (Ah)7 (at 20h rate) Maximum discharge current105A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cycle operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 65 x 99 Weight (kg)approx. 2.05 ConnectionFaston 187 (4.8 mm) CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP1270 lead-acid batteryFor which applications is the CP1270 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Security and alarm technologyFire alarm systems (BMA)Uninterruptible power supplies (UPS)Safety lighting and emergency lighting systemsMedical devicesModel making and hobby applicationsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leakage.What is the service life of the CP1270?The service life in standby operation (for example in an alarm system) is up to 5 years at an ambient temperature of 20°C. This corresponds to the EUROBAT category "Standard Commercial".Can this battery replace an old battery in my UPS or alarm system?Yes, the Vision CP1270 is one of the most common replacement batteries for many UPS systems, alarm systems and emergency lighting. Please compare the voltage (12V), the capacity (7Ah), the dimensions and the connector type (Faston 4.8 mm) with your old battery before purchase to ensure compatibility.What charging parameters apply to this battery?Float charge: The recommended voltage at 20°C is between 13.5 V and 13.8 V.Cyclic charge: For occasional cyclic charging a voltage between 14.4 V and 15.0 V is recommended.Maximum charging current: The charging current should not exceed 2.1 A to maximise battery service life.What does the connector type Faston 187 mean?Faston 187 refers to the type of connector. These are flat plug connectors with a width of 4.8 mm (0.187 inch). Cables are simply plugged onto these contacts, which enables fast and tool-free installation.
The Vision CP12120F2 is a high-quality, valve-regulated lead-acid battery (VRLA) with a nominal voltage of 12 volts and a capacity of 12 Ah. This all-purpose battery from the CP Series was developed for high reliability in standby operation and for light cyclic applications. Equipped with maintenance-free AGM technology, this battery offers safe and long-lasting energy supply for a wide range of applications, from security technology to emergency power supply.Highlights at a glanceReliable capacity: 12 Ah at 12 V for a constant and long-lasting energy supply.Long service life: Designed for a service life of up to 5 years in standby operation at 20°C.Maintenance-free: Leakproof and sealed AGM technology with a gas recombination rate of over 99%.High current capacity: Suitable for devices that require high inrush current for short periods.Flexible installation: Operation is possible in all positions, except permanent upside-down use.Tested quality: Manufactured according to ISO9001 and ISO14001 standards for consistently high quality.Powerful performance for versatile applicationsThe Vision CP12120F2 provides a capacity of 12 Ah at a 20-hour discharge. It is designed as a general-purpose battery and is effective both in standby parallel operation (float) and with occasional cyclical discharges. With a maximum discharge current of 180A for 5 seconds, this battery is also ideally suited for short-term power peaks, as required in UPS systems or in security technology.Robust technology for demanding environmentsThanks to VRLA technology (Valve Regulated Lead Acid) with AGM system (Absorbent Glass Mat), where the electrolyte is bound in a glass fibre mat, the CP12120F2 is absolutely maintenance-free and leakproof. This ensures safe operation in sensitive environments. The low self-discharge rate of around 3% per month enables long shelf life with high operational readiness. The robust ABS plastic housing offers excellent protection against mechanical influences.Features ModelVision CP12120F2 Battery typeVRLA AGM (standby / general purpose) Nominal voltage (V)12 Capacity (Ah)12 (at 20h rate) Maximum discharge current180A (for 5 seconds) Charging voltage (float charge)13.5V - 13.8V Charging voltage (cyclic operation)14.4V - 15.0V Operating temperature (°C)Charge: 0 ~ 40 / Discharge: -20 ~ 50 Storage temperature (°C)-20 ~ 40 Service lifeup to 5 years (EUROBAT: Standard Commercial) Dimensions (L/W/H, mm)151 x 98 x 98 Weight (kg)approx. 3.5 ConnectionFaston 250 (6.35 mm) CertificationsISO9001, ISO14001, CE, UL FAQs about the Vision CP12120F2 lead-acid batteryFor which applications is the CP12120F2 suitable?The battery is ideal for a wide range of standby and light cyclic applications:Uninterruptible power supplies (UPS)Security and alarm technologyFire alarm systems (BMA)Emergency lightingMedical devicesTelecommunication systemsIs the battery maintenance-free?Yes, thanks to the sealed AGM technology, the battery is completely maintenance-free. No topping up with distilled water is required and it is protected against leaking.What is the service life of the CP12120F2?The service life in standby operation (e.g. in a UPS system) is up to 5 years at an ambient temperature of 20°C and thus corresponds to the EUROBAT category "Standard Commercial".What is the difference between this battery and a purely cyclic type?The CP12120F2 is a general-purpose battery optimised for standby operation with occasional discharges. A purely cyclic battery is specially designed for frequent and deep discharges (e.g. in an electric wheelchair). For such applications, a cyclic type would deliver a longer service life.What are the charging parameters for this battery?Float charge: The recommended voltage at 20°C is between 13.5V and 13.8V.Cyclic charge: For occasional cyclic charging a voltage between 14.4V and 15.0V is recommended.Maximum charging current: The charging current should not exceed 3.6 A to avoid impairing service life.What are the temperature ranges and storage conditions?Charging: 0°C to +40°CDischarging: -20°C to +50°CStorage (fully charged): -20°C to +40°CSelf-discharge: about 3% per month at 20°C. For longer storage, it is recommended to recharge the battery every 6 months.