Crane replacement battery for Autec MBM06MH (7.2V NiMH) - Suitable for Modular & Dynamic

To order this product, please log in here.

Product number: AUTMBM06MH-700

EAN: 2050004973556

Length: 78.3 mm

Width: 52.4 mm

Height: 15.5 mm

Weight: 0.149 kg

Product information

This NiMH battery is the suitable replacement for the original Autec MBM06MH battery pack (also known under part number R0BATT00E0014). It is the standard energy source for a wide variety of Autec radio remote controls, especially from the Modular, Dynamic and Air series. With a voltage of 7.2 Volt and a typical capacity of 750 mAh (standard), it ensures reliable operation of your crane or machine control.

Highlights at a glance

100% compatible: Replaces the original battery MBM06MH, identical design and fits mechanically perfectly into the battery compartment of the hand transmitters.
Proven NiMH technology: Uses nickel-metal hydride cells. These are robust, safe and no longer have a memory effect (unlike very old NiCd batteries). You can recharge the battery at any time.
Suitable for your charger: The battery can easily be charged with the original Autec charging stations (e.g. MBC825A, MBC930D or MBC12V) can be charged. You do not need any new accessories.
Typical design: This is a flat, black block (approx. 77 x 53 x 15 mm) with the contacts on the front, which is inserted into the battery compartment.

Compatible models (extract)

This battery is the heart of many professional Autec remote controls:

Modular series: MJ, MK, MJ04, MK Plus
Dynamic / Dynamic+ series: FJL, FJM, FJR, FJS, DJL, DJM, DJR, DJS
Air series: AJS, AJR, AJM
Special models: E16 KTC, E16 Sirio 42

Features

Model	Replacement battery for Autec MBM06MH
Replaces original no.	MBM06MH, LPM02, LPM04 (older NiCd versions)
Application	Industrial radio remote controls (crane, concrete pump)
Chemistry	NiMH (nickel-metal hydride)
Voltage	7.2 V
Capacity	Typically 1500 mAh to 2000 mAh (original NiCd often only had 700 mAh)
Suitable for series	Modular series (MJ, MK) & Dynamic series (FJM, FJR, FJL)
Design	Flat, rectangular block (black) with contacts on the surface
Charging information	Charger must be NiMH-compatible (mostly the case with Autec)
Safety	High vibration resistance (important for construction site operation)
Weight (g)	approx. 180 - 200

FAQs about the Autec MBM06MH

Is this battery available with greater capacity (e.g. 2000 mAh)?

No, usually not in this size. The flat design limits the physical size of the cells inside. The standard capacity for these flat NiMH cells is technically about 700 to 800 mAh. Be sceptical of offers that promise unrealistically high values (such as 2000 mAh) for exactly this small battery type.

My battery only has 2 contacts, is that correct?

Yes. The MBM06MH usually has two main contacts (+) and (-) on the front for power transmission. Charging is often monitored via temperature or time control in the charger.

What is the difference to the LBM02MH?

Attention, risk of confusion! The LBM02MH looks similar, but only has 2.4 Volt (often for smaller transmitters). The MBM06MH has 7.2 Volt. The two are not electrically compatible. Be sure to check the nameplate on your old battery or in the battery compartment.