Skip to main content Skip to search Skip to main navigation
Menu

Low voltage

12 Products
SET-DEY-SEF5-SUN6

Low-voltage PV storage set: Deye SUN-6kW 3-phase hybrid inverter, 1x Deye SE-F5C Pro 5.12 kWh

The compact all-in-one package for your solar powerThis low-voltage storage kit from Deye combines the three-phase hybrid inverter SUN-6K-SG05LP3-EU-SM2 with a SE-F5C Pro lithium iron phosphate battery module with 5.12 kWh capacity. The set is ideal for detached houses with small to medium-sized PV systems and moderate electricity consumption. The inverter and battery are optimally matched in terms of power output: the battery can deliver a continuous output of around 5.1 kW, thereby utilising a large proportion of the inverter’s capacity. As both components are from the same manufacturer and communicate directly via CAN or RS485, installation and commissioning are particularly straightforward. And if your requirements grow, you can simply expand the storage system with additional modules.Deye SUN-6K-SG05LP3-EU-SM2: Efficient and versatileThe hybrid inverter delivers a rated output of 6 kW (max. 6.6 kVA) in three-phase mode and supports a PV connection capacity of up to 12 kWp, the maximum DC input power is 9 kW. Two MPP trackers, each with a 20 A input current and a wide voltage range of 200 to 650 V, ensure maximum yield even from roofs with varying orientations, such as east/west. With an efficiency of up to 97.6 % and an MPPT efficiency of over 99 %, virtually no energy is lost.For the battery, up to 135 A of charging and discharging current are available. In the event of a power cut, the inverter continues to supply your home in off-grid mode, providing three-phase power from the battery and PV system, whilst briefly delivering double the rated power for 10 seconds. The 100 % asymmetrical output allows up to 50 % of the rated power per phase, which is a real advantage in everyday life where loads are unevenly distributed.Furthermore, the inverter offers AC coupling for retrofitting existing PV systems, the integration of a diesel generator, six freely configurable time slots for charging and discharging (ideal for dynamic electricity tariffs), and the parallel connection of up to 10 units in both on-grid and off-grid operation. The IP65-rated housing allows for an operating temperature range of -40 to +60 °C, and at under 55 dB(A), the unit operates pleasantly quietly. The grid connection complies with VDE-AR-N 4105.Deye SE-F5C Pro: Safe LiFePO4 battery with displayThe SE-F5C Pro module utilises long-lasting and thermally stable lithium iron phosphate cells (LiFePO4) and offers 5.12 kWh at 51.2 V and 100 Ah. The C version features a display for direct viewing of the battery status. The advanced BMS with active fuse and the integrated circuit breaker ensure comprehensive protection.With at least 6,000 cycles, a guaranteed energy throughput of 16 MWh and a 10-year manufacturer’s warranty the storage system is designed for long-term, cost-effective operation. The module supports a continuous current of 100 A (1C) and a peak current of 150 A for 120 seconds. The storage system can be expanded to up to 32 modules in parallel (or even 64 with a CAN box) and can be mounted on the wall, on the floor or stacked. Using the optional Wi-Fi/Bluetooth module and the Deye app, you can monitor the battery locally or remotely, together with the inverter.Your benefits at a glanceYou receive a complete, optimally balanced system from a single source, with 6 kW three-phase power, up to 12 kWp PV connection capacity and 5.12 kWh storage capacity. The system is capable of providing emergency power, the LiFePO4 technology with a 10-year warranty ensures longevity, and the storage system scales flexibly to meet your needs. The 48 V low-voltage technology also offers greater safety during installation and maintenance than high-voltage systems.Contents of the package1x Deye SUN-6K-SG05LP3-EU-SM2 3-phase hybrid inverter1x Deye SE-F5 Pro LiFePO4 battery module, Config Version C with display (5.12 kWh) FAQs on the Deye low-voltage PV storage kit 6 kW inverter with 5.12 kWh storageWhich households is this kit suitable for?The kit is suitable for detached houses with a three-phase mains connection, a PV system of up to approximately 12 kWp and moderate electricity consumption, such as smaller families or couples. A 5.12 kWh storage unit typically covers a good portion of evening consumption. For larger PV systems or higher consumption, we also offer kits featuring the 8 kW inverter and up to three storage modules.Are the inverter and battery compatible in terms of power output?Yes, very well. An SE-F5 Pro module delivers up to 100 A continuously, which corresponds to around 5.1 kW. This means the battery can cover the majority of the 6 kW inverter output. The BMS automatically communicates the battery’s limit values to the inverter, ensuring the system always operates within safe parameters. With a second module, the inverter’s full battery current of 135 A can be utilised.How much PV capacity can I connect to the inverter?The SUN-6K-SG05LP3-EU-SM2 supports a PV connected load of up to 12 kWp, the maximum DC input power is 9 kW. The modules are distributed across two MPP trackers, each with one string, with an input current of up to 20 A per tracker and an MPPT voltage range of 200 to 650 V. The maximum DC input voltage of 800 V must not be exceeded, even at low temperatures, which is why string planning should be carried out by a specialist contractor.How much storage capacity is actually available?The capacity is 5.12 kWh. Deye recommends a depth of discharge of 90 %, which provides around 4.6 kWh of usable energy for everyday use. This reserve protects the cells and extends their service life.Does the system still work during a power cut?Yes. In the event of a power cut, the hybrid inverter can continue to operate in off-grid mode and supply your home with three-phase power from the battery and the PV system. In the absence of sunlight, the battery provides a continuous output of around 5 kW, and the stored energy is sufficient to power essential appliances such as the fridge, heating control, lighting and router. During the day, the PV system can supply additional electricity and recharge the battery. This requires the emergency power consumers to be wired appropriately during installation.How do I expand the storage capacity later?Additional SE-F5 Pro modules are simply connected in parallel and linked to the existing module via the communication ports (IN/OUT). Up to 32 modules are possible, with a CAN box, this can be increased to 64. To ensure smooth operation, it is recommended that you use modules of the same design and have the expansion carried out by a specialist contractor.Can I install the battery outdoors or in the garage?The inverter has an IP65 protection rating and is suitable for outdoor installation. The battery module, on the other hand, has an IP21 protection rating and should be installed in a dry indoor location, such as a cellar or utility room. Please also note that the battery can only be charged at temperatures between 0 and 55 °C; charging is therefore restricted in unheated rooms where frost is a risk.How long does the battery last?Deye specifies a cycle life of at least 6,000 cycles (at 25 °C down to 70 % remaining capacity). Based on one full cycle per day, this equates to over 16 years. In addition, Deye offers a 10-year warranty or 16 MWh of energy throughput, the manufacturer’s warranty terms and conditions apply.Can I retrofit an existing PV system?Yes. The inverter supports AC coupling, meaning that an existing PV system with its own inverter can be integrated. This also allows an older system, for example once EEG subsidies have ended, to be supplemented with a storage unit.Can I connect a generator?Yes, the inverter supports the integration of a diesel generator, for example for off-grid applications or as an additional safeguard during prolonged power cuts.How do I monitor my system?Using an optional data logger module (Wi-Fi, Bluetooth, 4G, GPRS or LAN), the system can be monitored via the Deye app. The battery can also be checked locally via Bluetooth, without the need for an internet connection. The app displays generation, consumption, grid draw, feed-in and charge status in real time.

Regular price: €2,497.81
Regular price: €2,497.81
zentheme.component.product.quantitySelect.legend
SET-DEY-SEF5-SUN8

Low-Voltage PV Storage Set: Deye SUN-8kW 3-phase hybrid inverter, 1x Deye SE-F5C Pro 5.12 kWh

A flexible introduction to energy storage technology with scope for future expansionThis low-voltage storage kit from Deye combines the three-phase SUN-8K-SG05LP3-EU-SM2 hybrid inverter with an SE-F5 Pro lithium iron phosphate battery module with a capacity of 5.12 kWh. It is particularly suitable for households with moderate electricity consumption and for anyone wishing to start with a compact storage system and expand their system later as required. The high-performance 8 kW inverter is designed for this right from the start. The inverter and battery are from the same manufacturer and communicate directly with each other via CAN or RS485. This significantly simplifies installation and commissioning.Deye SUN-8K-SG05LP3-EU-SM2: High-performance and future-proofThe hybrid inverter delivers a three-phase rated output of 8 kW (max. 8.8 kVA). It is designed for large PV systems: up to 16 kW of PV power can be connected, with a maximum PV input power of 12.8 kW. Two MPP trackers, each with an input current of 20 A and a wide MPPT voltage range of 200 to 650 V, ensure maximum yield even from roofs with varying orientations, such as east/west. With an efficiency of up to 97.6 % (Euro efficiency 97.0 %) and an MPPT efficiency of over 99 %, virtually no energy is lost.The inverter supports charging and discharging currents of up to 190 A. With a single battery module, the BMS limits the battery current to the module’s permissible continuous current of 100 A, which corresponds to approximately 5 kW of battery power at nominal voltage. With each additional module, the usable battery capacity increases; from two modules onwards, the inverter’s full output current can be utilised.In the event of a power cut, the inverter continues to supply your home in off-grid mode. The 100 % unbalanced output allows for up to 50 % of the rated power per phase. This is a real advantage in everyday life where loads are unevenly distributed.In addition, the inverter offers the following functions:AC coupling for retrofitting existing PV systemsIntegration of a diesel generatorsix freely adjustable time slots for charging and discharging, ideal for dynamic electricity tariffsParallel connection of up to 10 units in on-grid and off-grid operationThe IP65-rated housing is designed for an operating temperature range of -40 to +60 °C (power reduction from 45 °C). At a maximum of 55 dB, the unit operates pleasantly quietly. The grid connection complies with VDE-AR-N 4105.Deye SE-F5 Pro (Config C): Safe LiFePO4 storage system with displayThe SE-F5 Pro module utilises long-lasting and thermally stable lithium iron phosphate (LiFePO4) cells. It offers 5.12 kWh at 51.2 V and 100 Ah. The Config version C features a display for showing the battery status directly. The advanced BMS with active fuse and the integrated circuit breaker ensure comprehensive protection.With at least 6,000 cycles, a guaranteed energy throughput of 16 MWh and a 10-year manufacturer’s warranty, the storage system is designed for long-term, cost-effective operation. The module supports a continuous current of 100 A (1C) and a short-circuit current of 150 A for 120 seconds. The storage system can be expanded to up to 32 modules in parallel, or even up to 64 with a CAN box. The modules can be mounted on a wall, on the floor or stacked, with up to 6 modules per stack. Using the optional Wi-Fi/Bluetooth module and the Deye app, you can monitor the battery locally or remotely, together with the inverter.Your benefits at a glanceYou will receive a fully coordinated complete set from a single source, comprising:8 kW three-phase outputup to 16 kW PV connected load5.12 kWh storage capacity as an entry-level optionThe inverter is already designed for significantly larger storage systems, so you can easily expand the capacity later by adding further modules. The emergency power capability ensures your supply is maintained during grid outages. The LiFePO4 technology, backed by a 10-year warranty, ensures a long service life. The 48 V low-voltage technology also offers greater safety during installation and maintenance than high-voltage systems.Contents of the pack1x Deye SUN-8K-SG05LP3-EU-SM2 3-phase hybrid inverter1x Deye SE-F5 Pro LiFePO4 battery module, Config Version C with display (5.12 kWh) FAQs on the Deye Low-Voltage PV Storage Kit Which households is this kit suitable for?The kit is designed for households with a three-phase mains connection and moderate electricity consumption, who primarily wish to cover their evening consumption with their own solar power. It is also ideal as a starting point for anyone operating a large PV system who wishes to expand the storage capacity gradually at a later date. For higher consumption – for example, with a heat pump or electric car – the variants with two storage modules (10.24 kWh) or three storage modules (15.36 kWh) are often the more suitable choice.How much PV power can I connect to the inverter?The SUN-8K-SG05LP3-EU-SM2 supports a PV connected load of up to 16 kWp; the maximum PV input power is 12.8 kW. The modules are distributed across two MPP trackers, each handling one string. Each tracker handles up to 20 A of input current within an MPPT voltage range of 200 to 650 V. The maximum DC input voltage of 800 V must not be exceeded, even at low temperatures. String planning should therefore be carried out by a specialist contractor.How much storage capacity is actually usable?The capacity is 5.12 kWh. Deye recommends a depth of discharge of 90 %. This provides around 4.6 kWh of usable energy for everyday use. This reserve protects the cells and extends their service life.Does the system still work during a power cut?Yes. In the event of a power cut, the hybrid inverter can continue to operate in off-grid mode and supply your home with three-phase power from the battery and the PV system. During the day, solar power is also available. At night, the single module limits the available power to around 5 kW continuously and to approximately 7.7 kW for short periods (150 A for 120 seconds). The inverter’s double rated power for inrush currents is therefore not fully available in pure battery mode with a single module. A prerequisite for emergency power operation is that the emergency power consumers are wired accordingly during installation.Can I expand the storage system later?Yes, this kit is designed precisely for that purpose. The SE-F5 Pro modules can be expanded in parallel to up to 32 units, and with a CAN box even up to 64. With a second module, you can achieve 10.24 kWh; with a third, 15.36 kWh. The inverter can also be operated in parallel with up to 10 units if you require more power at a later date. For an upgrade, we recommend modules of the same type.Can I install the battery outdoors or in the garage?The inverter has an IP65 protection rating and is suitable for outdoor installation. The battery module, on the other hand, has an IP21 protection rating and must be installed in a dry indoor location, such as a cellar or utility room. The battery can only be charged between 0 and 55 °C and discharged between -20 and 55 °C. Charging is therefore restricted in unheated rooms where frost is a risk.How long does the battery last?Deye It specifies a cycle life of at least 6,000 cycles (at 25 °C down to 70 % residual capacity). Assuming one full cycle per day, this equates to over 16 years. In addition, Deye offers a 10-year warranty or a 16 MWh energy output guarantee. The manufacturer’s warranty terms and conditions apply.What is the warranty for the inverter?Deye The inverter comes with a 5-year warranty. Can I retrofit an existing PV system?Yes. The inverter supports AC coupling, meaning that an existing PV system with its own inverter can be integrated. This also allows an older system – for example, once EEG subsidies have ended – to be supplemented with a storage unit.Can I connect a generator?Yes. The inverter supports the integration of a diesel generator, for example for off-grid applications or as an additional safeguard during prolonged power cuts.How do I monitor my system?Using an optional data logger module (Wi-Fi, Bluetooth, 4G, GPRS or LAN), the system can be monitored via the ‘ Deye ’ app. With the battery’s optional Wi-Fi/Bluetooth module, you can also read the battery’s status locally via Bluetooth, without needing an internet connection. In the app, you can view generation, consumption, grid draw, feed-in and state of charge in real time. The display on the Config Version C also shows the battery status directly on the module.Can I install the kit myself?No. Installation and commissioning must only be carried out by a qualified electrician. The system must also be registered with the grid operator and entered in the market master data register. The inverter complies with the VDE-AR-N 4105 standard required in Germany.

Regular price: €2,497.81
Regular price: €2,497.81
zentheme.component.product.quantitySelect.legend
SET-SEF10-SUN8LP

Low-Voltage PV Storage Kit: Deye SUN-8kW 3-phase hybrid inverter, 2x Deye SE-F5C Pro 10.24 kWh

The tailored all-in-one package for self-consumption and emergency powerThis low-voltage storage kit from Deye combines the three-phase hybrid inverter SUN-8K-SG05LP3-EU-SM2 with two SE-F5 Pro lithium iron phosphate battery modules to provide a total storage capacity of 10.24 kWh. The inverter and battery are from the same manufacturer and communicate directly with each other via CAN or RS485, which significantly simplifies installation and commissioning. The result is a system that stores your solar power, increases your self-consumption and continues to supply you with electricity in the event of a power cut.Deye SUN-8K-SG05LP3-EU-SM2: Powerful and flexibleThe hybrid inverter delivers 8 kW rated power (max. 8.8 kVA) in three-phase mode and is designed for connection to large PV generators: up to 16 kW of PV power can be connected; the maximum DC input power is 12 kW. Two MPP trackers, each with an input current of 20 A and a wide voltage range from 200 to 650 V, ensure maximum yield even from roofs with varying orientations, such as east/west. With an efficiency of up to 97.6 % and an MPPT efficiency of over 99 %, virtually no energy is lost.For the battery, up to 190 A of charging and discharging current are available. In the event of a power cut, the inverter continues to supply your home in off-grid mode, briefly providing double the rated power for 10 seconds – enough to cover the start-up currents of pumps or compressors. The 100 % asymmetrical output allows up to 50 % of the rated power per phase, which is a real advantage in everyday use where loads are unevenly distributed.Furthermore, the inverter offers AC coupling for retrofitting existing PV systems, the integration of a diesel generator, six freely configurable time slots for charging and discharging (ideal for dynamic electricity tariffs), and the parallel connection of up to 10 units in both on-grid and off-grid operation. The IP65-rated housing allows for an operating temperature range of -40 to +60 °C, and at under 55 dB(A), the unit operates pleasantly quietly. The grid connection complies with VDE-AR-N 4105.Deye SE-F5 Pro: Safe LiFePO4 battery with displayThe SE-F5 Pro modules utilise durable and thermally stable lithium iron phosphate (LiFePO4) cells. Each module provides 5.12 kWh at 51.2 V and 100 Ah. The C version features a display showing the battery status in real time. The advanced BMS with active fuse and the integrated circuit breaker ensure comprehensive protection.With at least 6,000 cycles, a guaranteed energy throughput of 16 MWh and a 10-year manufacturer’s warranty is designed for long-term, cost-effective operation. Each module supports a continuous current of 100 A (1C) and a peak current of 150 A for 120 seconds, meaning that two modules can easily handle the inverter’s full battery current. The storage system can be expanded to up to 32 modules in parallel (or even 64 with a CAN box) and can be mounted on the wall, on the floor or stacked. Using the optional Wi-Fi/Bluetooth module and the Deye app, you can monitor the battery locally or remotely, together with the inverter.Your benefits at a glanceYou receive a fully integrated, complete system from a single source, offering 8 kW of three-phase power, up to 16 kW of PV connection capacity and 10.24 kWh of storage capacity. The emergency power capability provides protection in the event of a grid failure, the LiFePO4 technology with a 10-year warranty ensures longevity, and both the battery and the inverter can be flexibly expanded. The 48 V low-voltage technology also offers greater safety during installation and maintenance than high-voltage systems.Contents of the package1x Deye SUN-8K-SG05LP3-EU-SM2 3-phase hybrid inverter2x Deye SE-F5 Pro LiFePO4 battery module, Config Version C with display (5.12 kWh each) FAQs on the Deye Low-Voltage PV Storage Kit: 8 kW inverter with 10.24 kWh storageWhich households is this kit suitable for?The kit is ideal for detached houses with a three-phase grid connection and medium to high electricity consumption. With an 8 kW inverter output and 10.24 kWh of storage, a large proportion of evening and night-time consumption can be covered by your own solar power. For households with a heat pump or electric car, the storage capacity can easily be expanded at a later date.How much PV capacity can I connect to the inverter?The SUN-8K-SG05LP3-EU-SM2 supports a PV connected load of up to 16 kWp; the maximum DC input power is 12 kW. The modules are distributed across two MPP trackers, each with one string, with an input current of up to 20 A and an MPPT voltage range of 200 to 650 V. The maximum DC input voltage of 800 V must not be exceeded, even at low temperatures; for this reason, string planning should be carried out by a specialist contractor.How much storage capacity is actually available?The total capacity is 10.24 kWh (2 × 5.12 kWh). Deye recommends a depth of discharge of 90 %, which provides around 9.2 kWh of usable energy for everyday use. This reserve protects the cells and extends their service life.Does the system still work during a power cut?Yes. In the event of a mains power cut, the hybrid inverter can continue to operate in off-grid mode and supply your home with power from the battery and PV system, in three-phase mode. For a short period, it can even provide double the rated power for 10 seconds, for example to cover the start-up currents of pumps or compressors. This requires the emergency power consumers to be wired appropriately during installation.Can I expand the storage capacity later?Yes. The SE-F5 Pro modules can be expanded in parallel to up to 32 units, and with a CAN box even up to 64. The inverter can also be operated in parallel with up to 10 devices. Please note when expanding the system that the inverter charges and discharges at a maximum of 190 A; additional modules primarily increase the capacity, not the power output, of a single inverter.Can I install the batteries outdoors or in the garage?The inverter has an IP65 protection rating and is suitable for outdoor installation. The battery modules, on the other hand, have an IP21 protection rating and must be housed in a dry indoor space, such as a cellar or utility room. Please also note that the batteries can only be charged at temperatures between 0 and 55 °C; charging is therefore restricted in unheated rooms where frost is a risk.How long do the batteries last?Deye It specifies a cycle life of at least 6,000 cycles (at 25 °C down to 70 % of residual capacity). Assuming one full cycle per day, this equates to over 16 years. In addition, Deye offers a 10-year warranty or 16 MWh of energy output per module; the manufacturer’s warranty conditions apply.Can I retrofit an existing PV system?Yes. The inverter supports AC coupling, meaning that an existing PV system with its own inverter can be integrated. This also allows an older system – for example, once EEG subsidies have ended – to be supplemented with a storage unit.Can I connect a generator?Yes, the inverter supports the integration of a diesel generator, for example for off-grid applications or as an additional safeguard during prolonged power cuts.How do I monitor my system?Using an optional data logger module (Wi-Fi, Bluetooth, 4G, GPRS or LAN), the system can be monitored via the ‘ Deye ’ app. The batteries can also be read locally via Bluetooth, without the need for an internet connection. In the app, you can view generation, consumption, grid consumption, feed-in and state of charge in real time.

Regular price: €3,332.00
Regular price: €3,332.00
zentheme.component.product.quantitySelect.legend
SET-DEY-SEF5-SUN3.6-JAM460FB

Low-voltage PV kit, 4.6 kWp with 5.12 kWh storage

Your solar system with storage – all in one kitWith this complete set, you can generate your own solar power during the day and use it in the evening and at night. The set consists of three core components that work together: the solar panels generate the electricity. The hybrid inverter makes it usable for your home and controls the whole system. The battery storage system stores any surplus for later use.The result: you buy less electricity from your energy supplier and are less dependent on rising electricity prices. Who is this set suitable for?✅ Homeowners who want to reduce their electricity bills in the long term✅ Households with an annual consumption of approx. 2,500–5,000 kWh (guide figure)✅ Anyone who wants to use solar power in the evenings rather than feeding it into the grid at a low rate✅ Customers who wish to expand their system at a later date, e.g. with additional storage The components explained simply1. Solar modules: 10x JA Solar JAM54D41-460/LRWhat they do: The modules are mounted on the roof and generate electricity from sunlight. Together, they have a capacity of 4.6 kWp. The unit ‘kWp’ (kilowatt-peak) describes the peak power output under standard conditions.Why choose these modules:n-type cell technology: This modern generation of cells delivers a module efficiency of 23.0 %. Even in hot conditions, the modules lose comparatively little power (−0.29 % per °C).Glass-on-glass construction: Both the front and rear consist of 1.6 mm glass instead of a plastic film. This provides better protection against moisture and the elements and ensures a long service life.Monofacial: The modules generate electricity via their front side. The glass on the rear serves to provide protection and ensure longevity, not to generate electricity. This makes the modules ideal for traditional installation on a pitched roof, where hardly any light falls on the rear side anyway.Black design: The black modules blend discreetly into most roofs.Low ageing rate: The modules lose a maximum of 1 % of their output in the first year, and only 0.4 % per year thereafter. After 30 years, they will still deliver at least 87.4 % of their original output.Warranty: 25-year product warranty and a 30-year linear performance warranty.Good to know: Each module measures 1762 × 1134 mm and weighs 22 kg. It can withstand loads of 550 kg/m² on the front (e.g. snow) and 244 kg/m² on the rear (e.g. wind suction).2. Hybrid inverter: Deye SUN-3.6K-SG05LP1-EU-AM2What it does: The modules generate direct current, but your household needs alternating current. The inverter converts the electricity. As a hybrid inverter, it also controls the battery and automatically decides where the electricity flows: into the house, into the storage unit or into the grid.Why choose this inverter:3.6 kW output, single-phase: It feeds into one phase of your domestic connection. This is standard for systems of this size.High efficiency: Up to 97.6 %, meaning virtually no energy is lost during conversion.2 MPP trackers: These are two independent solar inputs. This allows, for example, groups of modules on roof surfaces with different orientations to be operated separately.Colour touchscreen display: You can read the key figures directly on the device.Quiet and robust: Operating noise below 30 dB and IP65 protection against dust and water jets.Intelligent charge control: With 6 freely adjustable time slots, you can specify when the battery is charged or discharged, for example to match a dynamic electricity tariff.Off-grid capable: According to the manufacturer, the inverter supports off-grid operation, i.e. operation independent of the mains supply. Whether and how your appliances continue to be powered during a power cut depends on the installation. Discuss this with your electrician.Future-proof: It supports AC coupling for retrofitting existing PV systems, charging via a diesel generator and parallel operation of up to 16 inverters.Compliant with standards: It complies with the German grid connection guideline VDE-AR-N 4105.Integrated protection functions: Insulation monitoring, fault current detection, anti-islanding protection, DC switch and overvoltage protection (Type II, DC and AC). 3. Battery storage: Deye SE-F5C Pro (display version)What it does: The storage system stores surplus solar power and releases it as soon as the panels are not supplying enough, i.e. mainly in the evening and at night.Why choose this storage system:5.12 kWh capacity: At the recommended depth of discharge of 90 %, approximately 4.6 kWh is available. To put this into perspective: for many households, this covers a large proportion of their evening and night-time consumption.LiFePO4 cells: Lithium iron phosphate is regarded as a particularly safe and long-lasting battery chemistry. The storage system can handle at least 6,000 charge cycles.Protected by BMS: An integrated battery management system with active protection continuously monitors the cells.Perfect synergy: The storage system and inverter communicate directly with each other (CAN/RS485), ensuring the battery is always charged optimally. The inverter charges and discharges at up to 90 A, which is around 4.6 kW.Expandable: If your electricity demand increases, for example due to an electric car or a heat pump, you can connect up to 32 storage units in parallel (up to 64 with a CAN box). More storage units mean greater capacity. The charging and discharging power is limited to around 4.6 kW by the inverter.Flexible installation: On the wall, on the floor or stacked.Warranty: 10 years or 16 MWh of energy throughput (in accordance with Deye warranty terms and conditions).Important: The storage unit has an IP21 protection rating and must be installed indoors, e.g. in the cellar, utility room or garage. It weighs approx. 44 kg and measures 404 × 547 × 141 mm. It can be charged at 0–55 °C and discharged at −20–55 °C. Contents of the package1x Deye SUN-3.6K-SG05LP1-EU-AM2 hybrid inverter (single-phase)1x Deye SE-F5C Pro LiFePO4 battery storage unit 5.12 kWh (display version)10x JA Solar JAM54D41-460/LR glass-on-glass module, black FAQs on the low-voltage PV kitCan the system recharge the battery via the solar panels even during a power cut?Yes, the system is fully capable of black start operation. In the event of a mains power failure, the inverter switches to off-grid mode. If the sun shines the following day, the solar power generated is primarily used to power the emergency loads in the house, whilst the battery is recharged at the same time (solar off-grid mode).Why is a low-voltage system used here instead of a high-voltage system?Cost-effectiveness and easy scalability. Low-voltage systems (48V/51.2V) are extremely safe to handle within the low-voltage range. Furthermore, the SE-F5 Pro-C series in the low-voltage segment does not require an expensive, separate master BMS box; each module is ready for immediate use and can be easily expanded in parallel.What are the advantages of the glass-on-glass design of JA Solar modules?Maximum robustness and durability. As the solar cells are protected by glass on both the front and back, they are extremely resistant to environmental factors such as hail, ammonia or micro-cracks. This ensures a significantly longer performance guarantee and more stable yields over decades.How do the inverter and the storage system communicate with each other?Via a direct CAN/RS485 data cable. The communication cable included in the scope of delivery connects the battery directly to the inverter. This enables a continuous exchange of data, ensuring that the inverter always charges or discharges the battery in a way that protects the cells and is absolutely efficient.

Regular price: €2,457.35
Regular price: €2,457.35
zentheme.component.product.quantitySelect.legend
SET-DEY-SEF5-SUN6-JAM460FB

Low-voltage PV kit 7.36 kWp with 10.24 kWh storage

Your solar system with a large storage unit – all in one kitWith this complete kit, you can generate your own solar power during the day and use it in the evenings and at night. The kit consists of three core components that work together: the solar modules generate the electricity. The hybrid inverter makes it usable for your household and controls the whole system. The battery storage systems store any surplus for later use.With 7.36 kWp and a 10.24 kWh storage unit, the kit is also designed for households with higher electricity consumption. You’ll buy less electricity from your energy supplier and be less dependent on rising electricity prices. Who is this kit suitable for?✅ Homeowners who want to reduce their electricity bills in the long term✅ Households with an annual consumption of approx. 4,000–8,000 kWh (guide figure)✅ Households with a three-phase domestic connection, as is common in Germany✅ Anyone who wants to use plenty of solar power in the evenings and at night✅ Customers who wish to expand their system at a later date, e.g. for an electric car or heat pump Components explained simply1. Solar modules: 16x JA Solar JAM54D41-460/LRWhat they do: The modules are mounted on the roof and generate electricity from sunlight. Together, they have a capacity of 7.36 kWp. The unit ‘kWp’ (kilowatt-peak) describes the peak output under standard conditions.Why these modules:n-type cell technology: This modern generation of cells delivers a module efficiency of 23.0 %. Even in hot conditions, the modules lose comparatively little power (−0.29 % per °C).Glass-on-glass construction: Both the front and rear consist of 1.6 mm glass instead of a plastic film. This provides better protection against moisture and the elements and ensures a long service life.Monofacial: The modules generate electricity via their front side. The glass on the rear serves to provide protection and ensure durability, not to generate electricity. Ideal for traditional installation on a pitched roof.Black design: The black modules blend discreetly into most roofs.Low degradation: The modules lose a maximum of 1 % of their output in the first year, and only 0.4 % per year thereafter. After 30 years, they will still be delivering at least 87.4 % of their original output.Warranty: 25-year product warranty and a 30-year linear performance warranty.Good to know: Each module measures 1762 × 1134 mm and weighs 22 kg. It can withstand loads of 5400 Pa on the front (e.g. snow) and 2400 Pa on the back (e.g. wind suction).2. Hybrid inverter: Deye SUN-6K-SG05LP3-EU-SM2What it does: The modules generate direct current, but your household needs alternating current. The inverter converts the electricity. As a hybrid inverter, it also controls the batteries and automatically decides where the electricity flows: into the house, into the storage system or into the grid.Why choose this inverter:6 kW output, 3-phase: It feeds power evenly into all three phases of your domestic connection. This is standard for systems of this size.Unbalanced output: It can load the phases to different degrees, up to 50 % of the rated power (3 kW) per phase. This is useful because domestic appliances rarely use the phases evenly.High efficiency: Up to 97.6 % (Euro efficiency 97.0 %), meaning virtually no energy is lost during conversion.2 MPP trackers: These are two independent solar inputs. This allows, for example, modules on two roof surfaces with different orientations to be operated separately.Smart charge control: With 6 freely adjustable time slots, you can specify when the batteries are charged or discharged, for example to match a dynamic electricity tariff.Off-grid operation: According to the manufacturer, the inverter supports off-grid operation, i.e. operation without connection to the public grid. Whether and how your appliances will continue to be powered in the event of a power cut depends on the installation. Discuss this with your electrician.Future-proof: It supports AC coupling for retrofitting existing PV systems, charging via a diesel generator and parallel operation of up to 10 inverters.Rugged: IP65 protection against dust and water jets, operating temperature range from −40 to +60 °C.Complies with standards: It complies with the German grid connection guideline VDE-AR-N 4105.Integrated protection functions: Insulation monitoring, residual current detection, anti-islanding protection, DC switch, reverse polarity protection and overvoltage protection (Type II, DC and AC).Good to know: The inverter weighs 35.2 kg and has a noise level of up to 55 dB. A utility room, utility cupboard, basement or garage is therefore a more suitable location than a living area. 3. Battery storage: 2x Deye SE-F5C Pro (display version)What they do: The storage units store surplus solar power and release it as soon as the modules are not supplying enough, i.e. mainly in the evening and at night.Why choose these storage systems:10.24 kWh capacity: Two modules of 5.12 kWh each. At the recommended depth of discharge of 90 %, approximately 9.2 kWh is available for use. This is sufficient for many households to cover a large proportion of their evening and night-time consumption.LiFePO4 cells: Lithium iron phosphate is considered a particularly safe and long-lasting battery chemistry. Each battery can handle at least 6,000 charge cycles.Protected by BMS: An integrated battery management system with active protection continuously monitors the cells.Perfect synergy: The battery and inverter communicate directly with each other (CAN/RS485), ensuring that charging takes place as dictated by the battery. The inverter charges and discharges at up to 135 A, which is around 6.9 kW.Expandable: If your electricity demand increases, for example due to an electric car or a heat pump, you can connect up to 32 storage units in parallel (up to 64 with a CAN box). The charging and discharging power is limited to around 6.9 kW by the inverter. How much additional storage makes sense depends on your consumption and your PV output.Flexible installation: On the wall, on the ground or stacked.Warranty: 10 years or 16 MWh of energy throughput per storage unit (in accordance with Deye warranty terms and conditions).Important: The storage units have an IP21 protection rating and must be installed indoors, e.g. in the cellar, utility room or garage. Each storage unit weighs approx. 44 kg and measures 404 × 547 × 141 mm. Charging is possible at 0–55 °C, and discharging at −20–55 °C. Scope of delivery1x Deye SUN-6K-SG05LP3-EU-SM2 hybrid inverter (3-phase)2x Deye SE-F5C Pro LiFePO4 battery storage units, 5.12 kWh each (display version)16x JA Solar JAM54D41-460/LR glass-glass module, black, monofacialFAQs on the low-voltage PV kitWhat sort of household is this kit suitable for?The kit is suitable for detached houses with an annual consumption of around 4,000 to 8,000 kWh, e.g. larger families or households with a home office. With a capacity of 7.36 kWp, a realistic annual solar power output of around 6,200 to 8,000 kWh can be expected in Germany, depending on the location, orientation and tilt angle.How much roof space do I need?One module measures 1762 × 1134 mm, i.e. around 2 m². For all 16 modules, you will need approximately 32 m² of pure module area, plus clearance around the edges. The total weight of the modules is around 352 kg.Can I spread the modules across two roof areas?Yes. The inverter has two independent solar inputs (MPP trackers). The 16 modules can, for example, be distributed as 2 × 8 modules on an east-facing and a west-facing side.How much energy can I actually store?The two SE-F5C Pro units have a combined rated energy capacity of 10.24 kWh. At the recommended depth of discharge of 90 %, you will have around 9.2 kWh of usable energy available.Why a three-phase inverter?In Germany, most houses have a three-phase connection. A three-phase inverter distributes the power across all three phases, which is standard for systems of this size. If required, it can also load the phases differently, with up to 3 kW per phase.Can I expand the storage system later?Yes. The SE-F5 Pro can be operated in parallel with up to 32 units, or up to 64 with a CAN box. Adding more storage increases the capacity, but the charging and discharging power remains limited to around 6.9 kW (135 A) due to the inverter.Will the system work during a power cut?According to the manufacturer, the inverter supports off-grid operation (stand-alone mode). Whether your appliances will continue to be powered in the event of a power cut depends on the installation. Seek advice from your electrician on this matter.Where are the inverter and storage unit installed?The storage units have an IP21 protection rating and must be located indoors, e.g. in the cellar, utility room or garage. The inverter has an IP65 protection rating but has a noise level of up to 55 dB. A utility room is therefore more suitable than a living area.What does ‘low voltage’ mean and what are the advantages?The storage units operate at a nominal voltage of 51.2 V (48 V class). Low-voltage systems are considered particularly safe to use and can be easily expanded in a modular fashion.Why glass-glass modules, and what does ‘monofacial’ mean?In glass-glass modules, a second pane of glass protects the rear instead of a plastic film. This makes them more durable and ensures minimal ageing, which is why JA Solar offers a 30-year linear performance warranty. ‘Monofacial’ means that only the front side generates electricity. This is ideal for traditional roof installation.What warranties apply?The JA Solar modules come with a 25-year product warranty and a 30-year linear performance warranty, guaranteeing a minimum output of 87.4 % after 30 years. Each SE-F5C Pro comes with a 10-year warranty or a 16 MWh energy output guarantee. The inverter comes with a 5- or 10-year warranty, depending on the installation location. The manufacturers’ respective warranty terms and conditions apply.Can I install the system myself?If you have some DIY skills, you can install the mounting structure and the modules yourself. However, connection to the domestic electricity supply and commissioning must be carried out by a registered electrician. Furthermore, the system must be registered with the grid operator and in the market master data register.

Regular price: €4,604.11
Regular price: €4,604.11
zentheme.component.product.quantitySelect.legend
SET-SEF15-SUN8LP

Low-Voltage PV Storage Kit: Deye SUN-8kW 3-phase hybrid inverter – 3x Deye SE-F5C Pro 15.36 kWh

The comprehensive package for maximum independenceThis low-voltage storage kit from Deye combines the three-phase hybrid inverter SUN-8K-SG05LP3-EU-SM2 with three SE-F5 Pro lithium iron phosphate battery modules to form a total storage capacity of 15.36 kWh. This makes the set particularly suitable for households with high electricity consumption, such as those with a heat pump, electric car or home office, and for anyone who wishes to be as independent as possible from the grid, even at night and on overcast days. The inverter and batteries are from the same manufacturer and communicate directly with each other via CAN or RS485, which significantly simplifies installation and commissioning.Deye SUN-8K-SG05LP3-EU-SM2: Powerful and flexibleThe hybrid inverter delivers 8 kW nominal power (max. 8.8 kVA) in three-phase configuration and is designed for connection to large PV generators: up to 16 kW of PV power can be connected, with a maximum DC input power of 12 kW. This is a particular advantage when combined with the large storage system, as surplus solar power can be fed entirely into the batteries during the day. Two MPP trackers, each with a 20 A input current and a wide voltage range of 200 to 650 V, ensure maximum yield even from roofs with varying orientations, such as east/west. With an efficiency of up to 97.6 % and an MPPT efficiency of over 99 %, virtually no energy is lost.For the battery, up to 190 A of charging and discharging current are available. In the event of a power cut, the inverter continues to supply your home in off-grid mode, briefly providing double the rated power for 10 seconds, enough to cover the start-up currents of pumps or compressors. With 15.36 kWh of storage capacity, you can also bridge longer outages. The 100 % asymmetrical output allows up to 50 % of the rated power per phase, which is a real advantage in everyday use where loads are unevenly distributed.Furthermore, the inverter offers AC coupling for retrofitting existing PV systems, the integration of a diesel generator, six freely configurable time slots for charging and discharging (ideal for dynamic electricity tariffs), and the parallel connection of up to 10 units in both on-grid and off-grid operation. The IP65-rated housing allows for an operating temperature range of -40 to +60 °C, and at under 55 dB(A), the unit operates pleasantly quietly. The grid connection complies with VDE-AR-N 4105.Deye SE-F5 Pro (Config C): Safe LiFePO4 battery with displayThe SE-F5 Pro modules utilise durable and thermally stable lithium iron phosphate (LiFePO4) cells. Each module provides 5.12 kWh at 51.2 V and 100 Ah. The C version features a display showing the battery status in real time. The advanced BMS with active fuse and the integrated circuit breaker ensure comprehensive protection.With at least 6,000 cycles, a guaranteed energy throughput of 16 MWh and a 10-year manufacturer’s warranty per module, the storage system is designed for long-term, cost-effective operation. As the inverter’s charging and discharging current is distributed across three modules, each individual module operates at significantly less than its permissible continuous current of 100 A, which further protects the cells. The storage system can be expanded to up to 32 modules in parallel (or even 64 with a CAN box) and can be mounted on the wall, on the floor or stacked. Using the optional Wi-Fi/Bluetooth module and the Deye app, you can monitor the batteries locally or remotely, together with the inverter.Your benefits at a glanceYou will receive a fully coordinated complete kit from a single source, featuring 8 kW three-phase power, up to 16 kW PV connection capacity and a generous 15.36 kWh storage capacity. The emergency power capability provides protection even during prolonged grid outages, the LiFePO4 technology with a 10-year warranty ensures longevity, and both the battery and the inverter can be flexibly expanded. The 48 V low-voltage technology also offers greater safety during installation and maintenance than high-voltage systems.Contents of the package1x Deye SUN-8K-SG05LP3-EU-SM2 3-phase hybrid inverter3x Deye SE-F5 Pro LiFePO4 battery module, Config Version C with display (5.12 kWh each) FAQs on the Deye Low-Voltage PV Storage Kit: 8 kW inverter with 15.36 kWh storageWhich households is this kit suitable for?The kit is designed for detached houses with a three-phase grid connection and high electricity consumption, for example those with a heat pump, an electric car or several people working from home. With 15.36 kWh of storage, evening and night-time consumption can, in many cases, be covered entirely by the home’s own solar power. For households with lower consumption, the version with two storage modules (10.24 kWh) is often the more economical choice.How much PV capacity can I connect to the inverter?The SUN-8K-SG05LP3-EU-SM2 supports a PV connected load of up to 16 kWp; the maximum DC input power is 12 kW. The modules are distributed across two MPP trackers, each with one string, with an input current of up to 20 A and an MPPT voltage range of 200 to 650 V. To ensure that the large storage system can be fully charged even during the day, a suitably sized PV system is recommended. The maximum DC input voltage of 800 V must not be exceeded, even at low temperatures, which is why string planning should be carried out by a specialist contractor.How much storage capacity is actually available?The total capacity is 15.36 kWh (3 × 5.12 kWh). Deye recommends a depth of discharge of 90 %, which provides around 13.8 kWh of usable energy for everyday use. This reserve protects the cells and extends their service life.Does the system still work during a power cut?Yes. In the event of a grid failure, the hybrid inverter can continue to operate in off-grid mode and supply your home with three-phase power from the battery and PV system. For a short period, it can even provide double the rated power for 10 seconds, for example to cover the start-up currents of pumps or compressors. Thanks to its large storage capacity, it can also effectively bridge longer outages. This requires the emergency power consumers to be wired appropriately during installation.Does the third storage unit also provide more power?The third battery primarily increases the capacity, i.e. how long you can use electricity from the battery. The charging and discharging current is limited by the inverter to a maximum of 190 A. There is, however, one advantage: the current is distributed across three modules, so that the load on each individual module is reduced, which can have a positive effect on their service life.Can I expand the storage system further at a later date?Yes. The SE-F5 Pro modules can be expanded in parallel to up to 32 units, and with a CAN box even up to 64. The inverter can also be operated in parallel with up to 10 units if you require more power at a later date.Can I install the batteries outdoors or in the garage?The inverter has an IP65 protection rating and is suitable for outdoor installation. The battery modules, on the other hand, have an IP21 protection rating and must be housed in a dry indoor space, such as a cellar or utility room. Please also note that the batteries can only be charged at temperatures between 0 and 55 °C; charging is therefore restricted in unheated rooms where frost is a risk.How long do the batteries last?Deye It specifies a cycle life of at least 6,000 cycles (at 25 °C down to 70 % of residual capacity). Assuming one full cycle per day, this equates to over 16 years. In addition, Deye offers a 10-year warranty or 16 MWh of energy output per module; the manufacturer’s warranty conditions apply.Can I retrofit an existing PV system?Yes. The inverter supports AC coupling, meaning that an existing PV system with its own inverter can be integrated. This also allows an older system, for example, once EEG subsidies have ended, to be supplemented with a large storage unit.Can I connect a generator?Yes, the inverter supports the integration of a diesel generator, for example for off-grid applications or as an additional safeguard during prolonged power cuts.How do I monitor my system?Using an optional data logger module (Wi-Fi, Bluetooth, 4G, GPRS or LAN), the system can be monitored via the ‘ Deye ’ app. The batteries can also be read locally via Bluetooth, without the need for an internet connection. In the app, you can view generation, consumption, grid consumption, feed-in and state of charge in real time.Can I install the kit myself?No. Installation and commissioning must only be carried out by a qualified electrician. The system must also be registered with the grid operator and entered in the market master data register. The inverter complies with the VDE-AR-N 4105 standard required in Germany.

Regular price: €4,081.70
Regular price: €4,081.70
zentheme.component.product.quantitySelect.legend
SET-DEY-SEF5-SUN8-JAM460FB

Low-voltage PV kit 10.12 kWp with 15.36 kWh storage

Your high-performance solar system with a large storage unit – all in one kitWith this complete kit, you can generate your own solar power during the day and use it in the evenings and at night. The kit consists of three core components that work together: the solar modules generate the electricity. The hybrid inverter makes it usable for your household and controls the whole system. The battery storage system store any surplus for later use.With 10.12 kWp and a 15.36 kWh storage unit, the kit is designed for households with high electricity consumption, such as those with a heat pump or an electric car. You’ll buy significantly less electricity from your energy supplier and be less dependent on rising electricity prices. Who is this kit suitable for?✅ Homeowners with high electricity consumption✅ Households with an annual consumption of approx. 6,000–11,000 kWh (guide figure)✅ Households with a heat pump or electric car✅ Households with a three-phase domestic connection, as is common in Germany✅ Anyone who wants to use as much solar power as possible themselves Components explained simply1. Solar modules: 22x JA Solar JAM54D41-460/LRHow it works: The modules are mounted on the roof and generate electricity from sunlight. Together, they have a capacity of 10.12 kWp. The unit ‘kWp’ (kilowatt-peak) describes the peak output under standard conditions.Why these modules:n-type cell technology: This modern generation of cells delivers a module efficiency of 23.0 %. Even in hot conditions, the modules lose comparatively little power (−0.29 % per °C).Glass-on-glass construction: Both the front and rear consist of 1.6 mm glass instead of a plastic film. This provides better protection against moisture and the elements and ensures a long service life.Monofacial: The modules generate electricity via their front side. The glass on the rear serves to provide protection and ensure durability, not to generate electricity. Ideal for traditional installation on a pitched roof.Black design: The black modules blend discreetly into most roofs.Low degradation: The modules lose a maximum of 1 % of their output in the first year, and only 0.4 % per year thereafter. After 30 years, they will still be delivering at least 87.4 % of their original output.Warranty: 25-year product warranty and a 30-year linear performance warranty.Good to know: Each module measures 1762 × 1134 mm and weighs 22 kg. It can withstand loads of 5400 Pa on the front (e.g. snow) and 2400 Pa on the back (e.g. wind suction).2. Hybrid inverter: Deye SUN-8K-SG05LP3-EU-SM2What it does: The modules generate direct current, but your household needs alternating current. The inverter converts the electricity. As a hybrid inverter, it also controls the batteries and automatically decides where the electricity flows: into the house, into the storage system or into the grid.Why choose this inverter:8 kW output, 3-phase: It feeds into all three phases of your domestic connection. This is standard for systems of this size.Unbalanced output: It can load the phases to different degrees, up to 50 % of the rated power (4 kW) per phase. This is useful because domestic appliances rarely use the phases evenly.High efficiency: Up to 97.6 % (Euro efficiency 97.0 %), meaning virtually no energy is lost during conversion.2 MPP trackers: These are two independent solar inputs. This allows, for example, modules on two roof surfaces with different orientations to be operated separately.High charging power: It charges and discharges the batteries at up to 190 A, which is around 9.7 kW.Smart charge control: With 6 freely adjustable time slots, you can specify when the batteries are charged or discharged, for example to match a dynamic electricity tariff.Off-grid operation: According to the manufacturer, the inverter supports off-grid operation, i.e. operation without connection to the public grid. Whether and how your appliances will continue to be powered in the event of a power cut depends on the installation. Discuss this with your electrician.Future-proof: It supports AC coupling for retrofitting existing PV systems, charging via a diesel generator and parallel operation of up to 10 inverters.Rugged: IP65 protection against dust and water jets, operating temperature range from −40 to +60 °C.Complies with standards: It complies with the German grid connection guideline VDE-AR-N 4105.Integrated protection functions: Insulation monitoring, residual current detection, anti-islanding protection, DC switch, reverse polarity protection and overvoltage protection (Type II, DC and AC).Good to know: The inverter weighs 35.2 kg and has a noise level of up to 55 dB. A utility room, utility cupboard, basement or garage is therefore a more suitable location than a living area. 3. Battery storage: 3x Deye SE-F5C Pro (display version)What they do: The storage units store surplus solar power and release it as soon as the modules are not supplying enough, particularly in the evening and at night.Why choose these storage systems:15.36 kWh capacity: Three modules of 5.12 kWh each. At the recommended depth of discharge of 90 %, approximately 13.8 kWh is available for use. This is sufficient to cover a large proportion of evening and night-time consumption for many households.LiFePO4 cells: Lithium iron phosphate is considered a particularly safe and long-lasting battery chemistry. Each battery can handle around 6,000 charge cycles.Protected by BMS: An integrated battery management system with active protection continuously monitors the cells.Perfect synergy: The battery and inverter communicate directly with each other (CAN/RS485), ensuring that charging takes place as dictated by the battery.Expandable: If your electricity demand continues to rise, you can connect up to 32 storage units in parallel (up to 64 with a CAN box). The charging and discharging power is limited to around 9.7 kW by the inverter. How much additional storage makes sense depends on your consumption and your PV output.Flexible installation: On the wall, on the floor or stacked (up to 6 storage units per stack).Warranty: 10 years or 16 MWh of energy throughput per storage unit (in accordance with Deye – warranty terms and conditions).Important: The storage units have an IP21 protection rating and must be installed indoors, e.g. in the cellar, utility room or garage. Each storage unit weighs approx. 44 kg (approx. 132 kg in total) and measures 404 × 547 × 141 mm. Charging is possible at 0–55 °C, and discharging at −20–55 °C. Scope of delivery1x Deye SUN-8K-SG05LP3-EU-SM2 hybrid inverter (3-phase)3x Deye SE-F5C Pro LiFePO4 battery storage units, each with a capacity of 5.12 kWh (display version)22x JA Solar JAM54D41-460/LR glass-glass module, black, monocrystalline FAQs on the low-voltage PV kitWhat sort of household is this kit suitable for?The kit is suitable for detached houses with high electricity consumption of around 6,000 to 11,000 kWh per year, e.g. those with a heat pump, an electric car or a large family. With a capacity of 10.12 kWp, a realistic annual solar power output of around 8,600 to 11,000 kWh can be expected in Germany, depending on the location, orientation and tilt.How much roof space do I need?One module measures 1762 × 1134 mm, i.e. around 2 m². For all 22 modules, you will need approximately 44 m² of pure module area, plus clearance around the edges. The total weight of the modules is around 484 kg.Can I spread the modules across two roof areas?Yes. The inverter has two independent solar inputs (MPP trackers). The 22 modules can, for example, be distributed as 2 × 11 modules on an east-facing and a west-facing side.How much energy can I actually store?The three SE-F5C Pro units have a combined rated energy capacity of 15.36 kWh. At the recommended depth of discharge of 90 %, you will have around 13.8 kWh of usable energy available.Why a three-phase inverter?In Germany, most houses have a three-phase connection. A three-phase inverter distributes the power across all three phases, which is standard for systems of this size. If required, it can also load the phases differently, with up to 4 kW per phase.Is the kit suitable for a heat pump or an electric car?Yes, the system size is designed to cope with high consumption. The storage unit can provide electricity generated during the day for use in the evening, with a discharge power of up to around 9.7 kW. How much solar power the heat pump and electric car actually use depends on the season and your usage patterns.Can I expand the storage system later?Yes. The SE-F5 Pro can be operated in parallel with up to 32 units, or up to 64 with a CAN box. Adding more storage increases the capacity, but the charging and discharging power remains limited to around 9.7 kW (190 A) due to the inverter.Will the system work during a power cut?According to the manufacturer, the inverter supports off-grid operation (stand-alone mode). Whether your appliances will continue to be powered in the event of a power cut depends on the installation. Seek advice from your electrician on this matter.Where are the inverter and storage unit installed?The storage units have an IP21 protection rating and must be located indoors, e.g. in the cellar, utility room or garage. The inverter has an IP65 protection rating but has a noise level of up to 55 dB. A utility room is therefore more suitable than a living area.What does ‘low voltage’ mean and what are the advantages?The storage units operate at a nominal voltage of 51.2 V (48 V class). Low-voltage systems are considered particularly safe to use and can be easily expanded in a modular fashion.Why glass-glass modules, and what does ‘monofacial’ mean?In glass-glass modules, a second pane of glass protects the rear instead of a plastic film. This makes them more durable and ensures minimal ageing, which is why JA Solar offers a 30-year linear performance warranty. ‘Mono-facial’ means that only the front side generates electricity. This is ideal for traditional roof installation.What warranties apply?Deye modules come with a 25-year product warranty and a 30-year linear performance warranty, guaranteeing a minimum output of 87.4 % after 30 years. Each SE-F5C Pro comes with a 10-year warranty or a 16 MWh energy output guarantee. The inverter comes with a 5- or 10-year warranty, depending on the installation location. The manufacturers’ respective warranty terms and conditions apply.Can I install the system myself?If you have some DIY skills, you can install the mounting structure and the modules yourself. However, connection to the domestic electricity supply and commissioning must be carried out by a registered electrician. Furthermore, the system must be registered with the grid operator and in the market master data register.

Regular price: €5,991.65
Regular price: €5,991.65
zentheme.component.product.quantitySelect.legend
SET-FEL10-SUN8LP

Low-voltage PV storage set: Deye SUN-8kW 3-phase hybrid inverter & Felicity FLS48100SG2 battery storage unit 10.24 kWh

Hybrid inverter and energy storage system as a set – the heart of your solar systemThis set contains the two key components of a solar system with storage: the three-phase Deye SUN-8K-SG05LP3-EU-SM2 hybrid inverter and the Felicity FLS48100SG2 battery storage unit with a capacity of 10.24 kWh. Combine this set with solar panels of your choice to install a new system, or retrofit an existing PV system with this low-voltage PV storage set. Who is this kit suitable for?✅ Builders and homeowners who wish to select their own solar panels✅ Owners of an existing PV system who wish to retrofit a storage system (AC coupling)✅ Households with a three-phase domestic connection, as is common in Germany✅ Households with higher consumption who wish to upgrade to up to 40.96 kWh at a later date Components explained simply1. Hybrid inverter: Deye SUN-8K-SG05LP3-EU-SM2What it does: Solar panels generate direct current (DC), but your household needs alternating current (AC). The inverter converts the electricity. As a hybrid inverter, it also controls the storage system and automatically decides where the electricity flows: into the house, into the storage system or into the grid.Why choose this inverter:8 kW output, 3-phase: It feeds into all three phases of your domestic connection, as is standard practice in Germany.Unbalanced output: It can load the phases to different degrees, up to 50 % of the rated power (4 kW) per phase. This is useful because domestic appliances rarely use the phases evenly.Plenty of scope for solar modules: Up to 12.8 kW maximum PV input power, 800 V maximum input voltage and two MPP trackers. This also allows you to utilise two roof areas with different orientations, e.g. east and west.High efficiency: Up to 97.6 % (Euro efficiency 97.0 %).Retrofitting a storage system: The inverter can also be combined with an existing PV system via AC coupling.Smart charge control: With 6 freely adjustable time slots, you can specify when the storage unit is charged or discharged, e.g. to match a dynamic electricity tariff.Off-grid operation: According to the manufacturer, the inverter supports off-grid operation, i.e. operation without connection to the public grid. Whether and how your appliances will continue to be powered in the event of a power cut depends on the installation. Discuss this with your electrician.Future-proof: It supports charging via a diesel generator and the parallel operation of up to 10 inverters.Rugged: IP65 protection against dust and water jets, operating temperature range from −40 to +60 °C.Complies with standards: It complies with the German grid connection guideline VDE-AR-N 4105.Integrated protection functions: Insulation monitoring, residual current detection, anti-islanding protection, DC switch, reverse polarity protection and overvoltage protection (Type II, DC and AC).Good to know: The inverter weighs 35.2 kg and has a noise level of up to 55 dB. A utility room, utility cupboard, basement or garage is therefore a more suitable location than a living area. 2. Battery storage: Felicity FLS48100SG2 (10.24 kWh)What it does: The storage unit stores surplus solar power and releases it as soon as the panels are not supplying enough, i.e. mainly in the evening and at night.Why choose this storage system:10.24 kWh capacity: Two modules, each with a capacity of 5.12 kWh. With a depth of discharge of at least 95 %, approximately 9.7 kWh is available.LiFePO4 cells: Lithium iron phosphate is considered a particularly safe and long-lasting battery chemistry. The storage system can around 6,000 charge cycles (at 0.2C, 25 °C and 80 % depth of discharge).Multiple layers of protection: An intelligent BMS, a circuit breaker and a fuse protect the storage unit. According to the manufacturer, this is supplemented by a fire protection module as well as protection against overcurrent, overvoltage, undervoltage and overtemperature. The fuse can be easily replaced from the outside.Easy to expand: The modules are stacked on top of one another. This allows you to expand the capacity up to 40.96 kWh (8 modules).Display: The control module displays the key values on an LCD screen; each battery module has an LED indicator.Charging and discharging capacity: With two modules, Felicity recommends 100 A (approx. 5.1 kW); a maximum of 120 A (approx. 6.1 kW) is possible under continuous operation. Adding more modules also increases the possible charging power.Warranty: 10 years (in accordance with Felicity’s warranty terms and conditions).Important: The storage unit has an IP21 protection rating and must be installed indoors, e.g. in the cellar, utility room or garage. It is placed or stacked on the floor, it is not designed for wall mounting. Each module weighs approx. 46 kg (approx. 92 kg in total) and measures 600 × 450 × 180 mm. Charging is possible at 0–55 °C, and discharging at −20–55 °C. Scope of delivery1x Deye SUN-8K-SG05LP3-EU-SM2 hybrid inverter (3-phase)1x Felicity FLS48100SG2 battery storage system 10.24 kWh, comprising 1x control module FLS48100SCG2 and 1x battery module FLS48100SMG2 FAQs on the low-voltage PV storage setWhich solar modules are compatible with the inverter?The inverter handles up to 12.8 kW of PV input power via two solar inputs, each with one string. The voltage range is 200–650 V, with a maximum current of 20 A per input. This means it is compatible with most modern solar modules. Your installer will determine the exact wiring configuration.Can I combine the kit with my existing PV system?Yes. The inverter supports AC coupling. This allows an existing PV system to be retrofitted with a storage unit without replacing the existing inverter. Your electrician will advise you whether this is suitable for your system.How much energy can I actually store?The battery has a rated capacity of 10.24 kWh. With a depth of discharge of at least 95 %, you’ll have around 9.7 kWh of usable energy available.How quickly does the storage unit charge and discharge?With two modules, Felicity recommends a current of 100 A, which is around 5.1 kW. A maximum of 120 A (around 6.1 kW) is possible on a continuous basis, depending on temperature and state of charge. As the number of storage modules increases, so does the possible charging and discharging power.Can I expand the storage system later?Yes. The FLS48100SG2 can be expanded to accommodate up to 8 modules, which equates to 40.96 kWh. The modules are simply stacked on top of one another.Can the storage unit be wall-mounted?No. The storage unit is placed on the floor or stacked. It has an IP21 protection rating and must be located indoors, e.g. in the cellar, utility room or garage.Where is the inverter installed?The inverter is IP65-rated and can also be operated in harsh environments. With a noise level of up to 55 dB, a utility room, cellar or garage is more suitable than a living space.Will the system work during a power cut?According to the manufacturer, the inverter supports off-grid operation (stand-alone mode). Whether your appliances will continue to be powered in the event of a power cut depends on the installation. Seek advice from your electrician on this matter.What does ‘low voltage’ mean and what are the advantages?The battery operates at a nominal voltage of 51.2 V (48 V class). Low-voltage systems are considered particularly safe to use and can be easily expanded in a modular fashion.What warranties apply?The Felicity battery comes with a 10-year warranty in accordance with Felicity Solar’s warranty terms and conditions. The Deye inverter comes with a 5-year warranty in accordance with Deye’s warranty terms and conditions.Can I install the system myself?Connection to the domestic mains supply and commissioning must be carried out by a registered electrician. Furthermore, the system must be registered with the grid operator and in the market master data register.

Regular price: €3,302.25
Regular price: €3,302.25
zentheme.component.product.quantitySelect.legend
ANKBKW2X480

Anker SOLIX Solar Bench 4 Set + 2 x AIKO Neostar 3S+54 480W Glass-Glass Full Black + Smart Meter 960 Wp

The complete balcony power station set, with a total output of 960 Wp, combines two highly efficient AIKO Neostar 3S+ 54 bifacial double-glazed solar modules with the intelligent Anker SOLIX Solarbank 4 E5000 Pro storage system, including a smart meter. This premium set combines state-of-the-art N-type ABC cell technology, maximum energy yield and optimal self-consumption with a durable and secure system architecture.Performance and cell technologyWith a peak power output of 960 Wp (2 x 480 W) and an outstanding module efficiency of 24.0%, the AIKO Full-Black modules set new standards. The innovative N-type ABC (All Back Contact) technology eliminates visible conductor tracks on the front of the module, which not only enables a completely uniform, aesthetic appearance but also ensures maximum yields even in diffuse light and under partial shading.Smart storage and net-zero feed-inThe Anker SOLIX Solarbank 4 E5000 Pro reliably stores surplus solar power for use in the evening and at night. Thanks to the smart meter included in the package, the household’s current electricity demand is monitored in real time. The system precisely controls energy output and enables efficient zero-feed-in via the user-friendly Anker app.Robust construction and durabilityThe AIKO modules feature a bifacial double-glass construction (2.0 + 2.0 mm coated glass) with a black anodised aluminium frame, which ensures optimum protection against the elements and micro-cracks. Together with the solar bank’s robust, weatherproof housing, the entire system is designed for demanding outdoor environments on balconies, flat roofs, façades or in gardens. Scope of delivery1 x Anker SOLIX Solarbank 4 E5000 Pro storage system1 x Anker smart meter for zero net metering2 x AIKO Neostar 3S+ 54 bifacial double-glass module with 480 W Full Black1 x installation and connection accessories

Regular price: €2,021.81
Regular price: €2,021.81
zentheme.component.product.quantitySelect.legend
ANKBKW3X480

Anker SOLIX Solar Bench 4 Set + 3 x AIKO Neostar 3S+54 480W glass-glass Full Black + Smart Meter 1.44 kWp

The Balcony Power Station Complete Set, with a total output of 1,440 Wp, combines three highly efficient AIKO Neostar 3S+ 55 bifacial double-glazed solar modules with the intelligent Anker SOLIX Solarbank 4 E5000 Pro storage system, including a smart meter. This premium set combines state-of-the-art N-type ABC cell technology, maximum energy yield and optimal self-consumption with a durable and secure system architecture.Performance and cell technologyWith a peak power output of 1,440 Wp (3 x 480 W) and an outstanding module efficiency of 24.0%, the AIKO Full Black Black set new standards. The innovative N-type ABC (All Back Contact) technology eliminates visible conductor tracks on the front of the module, which not only ensures a completely uniform, aesthetic appearance but also delivers maximum yields even in diffuse light and under partial shading.Smart storage and net-zero feed-inThe Anker SOLIX Solarbank 4 E5000 Pro reliably stores surplus solar power for use in the evening and at night. Thanks to the smart meter included in the package, the household’s current electricity demand is monitored in real time. The system precisely controls energy output and enables efficient zero-feed-in via the user-friendly Anker app.Robust construction and durabilityThe AIKO modules feature a bifacial double-glass design (2.0 + 2.0 mm coated glass) with a black anodised aluminium frame, which ensures optimum protection against the elements and micro-cracks. Together with the solar bank’s robust, weatherproof housing, the entire system is designed for demanding outdoor locations such as balconies, flat roofs, façades or gardens.Technical details Set nameSolarbank 4 + 3 x AIKO 480 W complete set Total power (Pmax)1,440 Wp Number of solar modules3 x AIKO Neostost 3S+ 54 (480 W each) Module efficiency24,0 % Cell technologyN-type ABC (Full Black) Module glass constructionDouble-glazed, 2.0 + 2.0 mm semi-tempered glass Storage unitAnker SOLIX Solarbank 4 E5000 Pro Smart meterIncludes (for dynamic zero-feed-in) Connectivity / MonitoringWi-Fi & Bluetooth via the Anker app Total weightapprox. 93 kg Product warranty for solar modules30 years Performance guarantee for solar modules30-year linear warranty Contents of the package1 x Anker SOLIX Solarbank 4 E5000 Pro storage system1 x Anker smart meter for zero net metering3 x AIKO Neostar 3S+ 54 bifacial double-glazed module with 480 W Full Black1 x installation and connection accessories

Regular price: €2,140.81
Regular price: €2,140.81
zentheme.component.product.quantitySelect.legend
ANKBKW4X480

Anker SOLIX Solar Bench 4 Set + 4 x AIKO Neostar 3S+54 480W glass-glass Full Black + Smart Meter 1.92 kWp

The complete balcony power plant set, with a total output of 1,920 Wp, combines four highly efficient AIKO Neostar 3S+ 54 bifacial double-glazed solar modules with the intelligent Anker SOLIX Solarbank 4 E5000 Pro storage system, including a smart meter. This premium set combines state-of-the-art N-type ABC cell technology, maximum energy yield and optimal self-consumption with a durable and secure system architecture.Performance and cell technologyWith a peak power output of 1,920 Wp (4 x 480 W) and an outstanding module efficiency of 24.0 %, the AIKO Full-Black modules set new standards. The innovative N-type ABC (All Back Contact) technology eliminates visible conductor tracks on the front of the module, which not only enables a completely uniform, aesthetic appearance but also ensures maximum yields even in diffuse light and partial shading.Smart storage and net-zero feed-inThe Anker SOLIX Solarbank 4 E5000 Pro reliably stores surplus solar power for use in the evening and at night. Thanks to the smart meter included in the package, the household’s current electricity demand is monitored in real time. The system precisely controls energy output and enables efficient zero-feed-in via the user-friendly Anker app.Robust construction and durabilityThe AIKO modules feature a bifacial double-glass design (2.0 + 2.0 mm coated glass) with a black anodised aluminium frame, which ensures optimum protection against the elements and micro-cracks. Together with the solar bank’s robust, weatherproof housing, the entire system is designed for demanding outdoor locations such as balconies, flat roofs, façades or gardens.Technical details Set nameSolarbank 4 + 4 x AIKO 480 W complete set Total power (Pmax)1,920 Wp Number of solar modules4 x AIKO Neostar 3S+ 54 (480 W each) Module efficiency24,0 % Cell technologyN-type ABC (Full Black) Module glass constructionDouble-glazed, 2.0 + 2.0 mm semi-tempered glass Storage unitAnker SOLIX Solarbank 4 E5000 Pro Smart meterIncludes (for dynamic zero-feed-in) Connectivity / MonitoringWi-Fi & Bluetooth via the Anker app Total weightapprox. 118 kg Product warranty for solar modules30 years Performance guarantee for solar modules30-year linear warranty Contents of the package1 x Anker SOLIX Solarbank 4 E5000 Pro storage system1 x Anker smart meter for zero net metering4 x AIKO Neostar 3S+ 54 bifacial double-glazed module with 480 W Full Black1 x installation and connection accessories

Regular price: €2,378.81
Regular price: €2,378.81
zentheme.component.product.quantitySelect.legend
ANKBKW8X480

Anker SOLIX Solar Bench 4 Set + 8 x AIKO Neostar 3S+54 480W glass-on-glass Full Black + Smart Meter 3.84 kWp

The complete balcony power plant set, with a total output of 1,920 Wp, combines four highly efficient AIKO Neostar 3S+ 54 bifacial double-glazed solar modules with the intelligent Anker SOLIX Solarbank 4 E5000 Pro storage system, including a smart meter. This premium set combines state-of-the-art N-type ABC cell technology, maximum energy yield and optimal self-consumption with a durable and secure system architecture.Performance and cell technologyWith a peak power output of 1,920 Wp (4 x 480 W) and an outstanding module efficiency of 24.0%, the AIKO Full-Black modules set new standards. The innovative N-type ABC (All Back Contact) technology eliminates visible conductor tracks on the front of the module, which not only enables a completely uniform, aesthetic appearance but also ensures maximum yields even in diffuse light and under partial shading.Smart storage and zero net meteringThe Anker SOLIX Solarbank 4 E5000 Pro reliably stores surplus solar power for use in the evening and at night. Thanks to the smart meter included in the package, the household’s current electricity demand is monitored in real time. The system precisely controls energy output and enables efficient zero-feed-in via the user-friendly Anker app.Robust construction and durabilityThe AIKO modules feature a bifacial double-glass design (2.0 + 2.0 mm coated glass) with a black anodised aluminium frame, which ensures optimum protection against the elements and micro-cracks. Together with the solar bank’s robust, weatherproof housing, the entire system is designed for demanding outdoor environments on balconies, flat roofs, façades or in gardens.Technical details Set nameSolarbank 4 + 4 x AIKO 480 W complete set Total power (Pmax)1,920 Wp Number of solar modules4 x AIKO Neostar 3S+ 54 (480 W each) Module efficiency24,0 % Cell technologyN-type ABC (Full Black) Module glass structureDouble-glazed, 2.0 + 2.0 mm semi-tempered glass Storage unitAnker SOLIX Solarbank 4 E5000 Pro Smart meterIncludes (for dynamic zero-feed-in) Connectivity / MonitoringWi-Fi & Bluetooth via the Anker app Total weightapprox. 118 kg Product warranty for solar modules30 years Performance guarantee for solar modules30-year linear warranty Contents of delivery1 x Anker SOLIX Solarbank 4 E5000 Pro storage system1 x Anker smart meter for zero net metering4 x AIKO Neostar 3S+ 54 bifacial double-glazed module with 480 W Full Black1 x installation and connection accessories

Regular price: €2,854.81
Regular price: €2,854.81
zentheme.component.product.quantitySelect.legend