Low-voltage PV kit, 4.6 kWp with 5.12 kWh storage
€2,457.35
Prices include 19 % VAT, free delivery
Product information
Your solar system with storage – all in one kit
With this complete set, you can generate your own solar power during the day and use it in the evening and at night. The set consists of three core components that work together: the solar panels generate the electricity. The hybrid inverter makes it usable for your home and controls the whole system. The battery storage system stores any surplus for later use.
The result: you buy less electricity from your energy supplier and are less dependent on rising electricity prices.
Who is this set suitable for?
✅ Homeowners who want to reduce their electricity bills in the long term
✅ Households with an annual consumption of approx. 2,500–5,000 kWh (guide figure)
✅ Anyone who wants to use solar power in the evenings rather than feeding it into the grid at a low rate
✅ Customers who wish to expand their system at a later date, e.g. with additional storage
The components explained simply
1. Solar modules: 10x JA Solar JAM54D41-460/LR
What they do: The modules are mounted on the roof and generate electricity from sunlight. Together, they have a capacity of 4.6 kWp. The unit ‘kWp’ (kilowatt-peak) describes the peak power output under standard conditions.
Why choose these modules:
- n-type cell technology: This modern generation of cells delivers a module efficiency of 23.0 %. Even in hot conditions, the modules lose comparatively little power (−0.29 % per °C).
- Glass-on-glass construction: Both the front and rear consist of 1.6 mm glass instead of a plastic film. This provides better protection against moisture and the elements and ensures a long service life.
- Monofacial: The modules generate electricity via their front side. The glass on the rear serves to provide protection and ensure longevity, not to generate electricity. This makes the modules ideal for traditional installation on a pitched roof, where hardly any light falls on the rear side anyway.
- Black design: The black modules blend discreetly into most roofs.
- Low ageing rate: The modules lose a maximum of 1 % of their output in the first year, and only 0.4 % per year thereafter. After 30 years, they will still deliver at least 87.4 % of their original output.
- Warranty: 25-year product warranty and a 30-year linear performance warranty.
Good to know: Each module measures 1762 × 1134 mm and weighs 22 kg. It can withstand loads of 550 kg/m² on the front (e.g. snow) and 244 kg/m² on the rear (e.g. wind suction).
2. Hybrid inverter: Deye SUN-3.6K-SG05LP1-EU-AM2
What it does: The modules generate direct current, but your household needs alternating current. The inverter converts the electricity. As a hybrid inverter, it also controls the battery and automatically decides where the electricity flows: into the house, into the storage unit or into the grid.
Why choose this inverter:
- 3.6 kW output, single-phase: It feeds into one phase of your domestic connection. This is standard for systems of this size.
- High efficiency: Up to 97.6 %, meaning virtually no energy is lost during conversion.
- 2 MPP trackers: These are two independent solar inputs. This allows, for example, groups of modules on roof surfaces with different orientations to be operated separately.
- Colour touchscreen display: You can read the key figures directly on the device.
- Quiet and robust: Operating noise below 30 dB and IP65 protection against dust and water jets.
- Intelligent charge control: With 6 freely adjustable time slots, you can specify when the battery is charged or discharged, for example to match a dynamic electricity tariff.
- Off-grid capable: According to the manufacturer, the inverter supports off-grid operation, i.e. operation independent of the mains supply. Whether and how your appliances continue to be powered during a power cut depends on the installation. Discuss this with your electrician.
- Future-proof: It supports AC coupling for retrofitting existing PV systems, charging via a diesel generator and parallel operation of up to 16 inverters.
- Compliant with standards: It complies with the German grid connection guideline VDE-AR-N 4105.
Integrated protection functions: Insulation monitoring, fault current detection, anti-islanding protection, DC switch and overvoltage protection (Type II, DC and AC).
3. Battery storage: Deye SE-F5C Pro (display version)
What it does: The storage system stores surplus solar power and releases it as soon as the panels are not supplying enough, i.e. mainly in the evening and at night.
Why choose this storage system:
- 5.12 kWh capacity: At the recommended depth of discharge of 90 %, approximately 4.6 kWh is available. To put this into perspective: for many households, this covers a large proportion of their evening and night-time consumption.
- LiFePO4 cells: Lithium iron phosphate is regarded as a particularly safe and long-lasting battery chemistry. The storage system can handle at least 6,000 charge cycles.
- Protected by BMS: An integrated battery management system with active protection continuously monitors the cells.
- Perfect synergy: The storage system and inverter communicate directly with each other (CAN/RS485), ensuring the battery is always charged optimally. The inverter charges and discharges at up to 90 A, which is around 4.6 kW.
- Expandable: If your electricity demand increases, for example due to an electric car or a heat pump, you can connect up to 32 storage units in parallel (up to 64 with a CAN box). More storage units mean greater capacity. The charging and discharging power is limited to around 4.6 kW by the inverter.
- Flexible installation: On the wall, on the floor or stacked.
- Warranty: 10 years or 16 MWh of energy throughput (in accordance with Deye warranty terms and conditions).
Important: The storage unit has an IP21 protection rating and must be installed indoors, e.g. in the cellar, utility room or garage. It weighs approx. 44 kg and measures 404 × 547 × 141 mm. It can be charged at 0–55 °C and discharged at −20–55 °C.
Contents of the package
- 1x Deye SUN-3.6K-SG05LP1-EU-AM2 hybrid inverter (single-phase)
- 1x Deye SE-F5C Pro LiFePO4 battery storage unit 5.12 kWh (display version)
- 10x JA Solar JAM54D41-460/LR glass-on-glass module, black
FAQs on the low-voltage PV kit
Can the system recharge the battery via the solar panels even during a power cut?
- Yes, the system is fully capable of black start operation. In the event of a mains power failure, the inverter switches to off-grid mode. If the sun shines the following day, the solar power generated is primarily used to power the emergency loads in the house, whilst the battery is recharged at the same time (solar off-grid mode).
Why is a low-voltage system used here instead of a high-voltage system?
- Cost-effectiveness and easy scalability. Low-voltage systems (48V/51.2V) are extremely safe to handle within the low-voltage range. Furthermore, the SE-F5 Pro-C series in the low-voltage segment does not require an expensive, separate master BMS box; each module is ready for immediate use and can be easily expanded in parallel.
What are the advantages of the glass-on-glass design of JA Solar modules?
- Maximum robustness and durability. As the solar cells are protected by glass on both the front and back, they are extremely resistant to environmental factors such as hail, ammonia or micro-cracks. This ensures a significantly longer performance guarantee and more stable yields over decades.
How do the inverter and the storage system communicate with each other?
- Via a direct CAN/RS485 data cable. The communication cable included in the scope of delivery connects the battery directly to the inverter. This enables a continuous exchange of data, ensuring that the inverter always charges or discharges the battery in a way that protects the cells and is absolutely efficient.
| Cell type: solar module: | N-type monocrystalline, 108 (6x18) half-cells |
|---|---|
| Colour of solar module: | Full Black |
| Communication: Inverters: | WIFI / RS485 / CAN |
| Communication Storage: | CAN2.0 / RS485 |
| Cycle life of storage systems: | ≥ 6,000 cycles (at 25 ± 2 °C, 70% EOL) |
| Grid approvals: | IEC 61727 / IEC 62116 / CEI 0-21 / EN 50549 / NRS 097 / RD 140 / UNE 217002 / OVE Guidelines R25, G98, G99 / VDE-AR-N 4105 |
| Ingress protection rating for inverters: | IP65 |
| Inverter warranty: | 5 years |
| MPPT efficiency: | > 99 % |
| MPPT trackers / strings per tracker: | 2 / 1+1 |
| Max. AC apparent power of the inverter: | 3.96 kVA |
| Max. charging/discharging current for inverters: | 90 A / 90 A |
| Max. rated power of solar modules: | 4.6 kWp |
| Maximum inverters efficiency: | 97.60 % |
| Modular design: | Monofacial |
| Module efficiency: | 23.0 % |
| Nominal voltage of storage units: | 51.2 V |
| Off-grid operation (stand-alone / off-grid): | Yes |
| Operating temperature of inverters: | –40 to +60 °C |
| Operating temperature of storage units (charging / discharging): | 0 °C to +55 °C / -20 °C to +55 °C |
| Operating voltage of storage systems: | 44.8 ~ 57.6 V |
| Protection class for storage systems: | IP21 |
| Rated power of the inverter (AC): | 3.60 kW |
| Rated power per solar module: | 460 W |
| Safety / EMC / Standards: | IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 |
| Solar panel dimensions (L x W x H): | 1762 x 1134 x 30 mm |
| Solar panel warranty: | 25 years |
| Solar panel weight per: | 22 kg |
| Storage certifications: | UN38.3 / MSDS / CE / CB / VDE2510-50 / FCC / UL1973 / UL9540A / CEC |
| Storage system capacity (rated value): | 5.12 kWh |
| Storage warranty: | 10 years |
| Zellchemie Storage: | LiFePO4 |
Login