FOX ESS
FOX ESS Power Cube 5 kW with 9.94 kWh storage | HQ3-5.0-M hybrid inverter & 2x EQ5000 batteries
FOX ESS Power Cube 5 kW with EQ5000 9.94 kWh – All-in-one systemThis configuration of the FOX ESS Power Cube is the compact entry-level model in the EQ5000 series: the fanless HQ3-5.0-M hybrid inverter and two EQ5000 battery modules form an all-in-one system with 9.94 kWh. Thanks to 100 % depth of discharge, just under 10 kWh of solar power is available for the evening and night.The inverter and storage system are well matched: with around 4.5 kW from the storage system, the system utilises almost the full inverter output of 5 kW. With up to 11 kWp of PV capacity, an integrated emergency power gateway and an operating noise level of under 40 dB, it is ideally suited to small to medium-sized detached houses.At a glanceAll-in-one: Inverter, storage and gateway in a single system9.94 kWh EQ5000 storage unit, 100 % usable according to the manufacturerAround 4.5 kW from the storage system, almost the full inverter output5 kW hybrid inverter, three-phase, max. 5.5 kVAFanless: natural cooling, < 40 dBUp to 11 kWp PV capacity on 3 MPP trackersExpandable to up to 9 modules or 44.73 kWhEmergency power for the whole house: 63 A bypass, off-grid operation < 20 msBlack start from the battery is possibleIP66 for indoor and outdoor useVDE-AR-N 4105 certifiedThis is how the system scales up ModulesCapacity (100 % usable)Rated voltageOperating voltageStorage heightStorage weightPower from the storage system (calculated) 2 (this configuration)9.94 kWh89.6 V81.2–102.2 V276 mm82 kgapprox. 4.5 kW 314.91 kWh134.4 V121.8–153.3 V414 mm123 kgFull 5 kW, 6 kW charging 419.88 kWh179.2 V162.4–204.4 V552 mm164 kgfull power 524.85 kWh224.0 V203.0–255.5 V690 mm205 kgfull power 629.82 kWh268.8 V243.6–306.6 V828 mm246 kgfull power 734.79 kWh313.6 V284.2–357.7 V966 mm287 kgfull power 839.76 kWh358.4 V324.8–408.8 V1,104 mm328 kgfull power 944.73 kWh403.2 V365.4–459.9 V1,242 mm369 kgfull power Width and depth: 570 × 380 mm. The performance figures apply to the HQ3-5.0-M.Technical data for the HQ3-5.0-M inverterPV inputMax. array power: 11,000 WMax. PV output: 11,000 WMax. voltage: 1,000 V (maximum operating voltage 950 V)MPPT voltage range: 120–950 V, 120–850 V at full loadStart-up voltage: 140 VNumber of MPPT units / strings per MPPT: 3 / 1+1+1Max. input current per MPPT: 20 A (short-circuit current 25 A)Max. input power per MPPT: 10,000 WAC output (mains)Rated power: 5,000 WMax. apparent power: 5,500 VAMains connection: 400/230 V or 380/220 V, 3L/N/PE, 50/60 HzRated output current / max. current per phase: 7.6 A / 8.3 APower factor: 1 (adjustable from 0.8 capacitive to 0.8 inductive)Battery connectionBattery type: Lithium-ion (LFP)Battery voltage: 80–500 VMinimum battery operating voltage: 85 VMinimum battery voltage at full AC load: 108 VMax. charging power / discharge power: 6,000 W / 5,000 WMax. charging/discharging current: 50 AEfficiencyMax. efficiency: 97.8 %European efficiency: 97.0 %PV to battery / battery to AC: 97.0 % eachMPPT efficiency: 99.9 %Technical data for storage units (2 × EQ5000-S-P)Cell chemistry: LFP (LiFePO₄)Rated energy: 9.94 kWhRated voltage / Operating voltage: 89.6 V / 81.2–102.2 VRecommended discharge current: 50 AMax. charge/discharge current: 50 A (depending on temperature, cell voltage and SOC)Peak discharge current (60 s): 65 ACharging/discharging efficiency: > 95 % (at 25 °C, 0.3C)Depth of discharge: 100 %Operating temperature: Charging 0–55 °C, discharging −10–55 °C, with a warm-up function from −25 °C in each caseStorage temperature: -10–35 °CCooling: natural convectionFire protection function: YesProtection rating: IP66Dimensions (W × D × H): 570 × 380 × 276 mmWeight: 82 kg (±5 %)Certificates: IEC 62619, EN IEC 61000-6-1/2/3/4, UN38.3Quiet in the homeThe HQ3-5.0-M is naturally cooled and remains below 40 dB. As there is no fan, there are no moving parts that can wear out or collect dust, and the system can be easily installed in a utility room, basement or hallway.Emergency power and off-grid operationIn grid-connected mode, the entire household power supply runs via the gateway, with up to 63 A per phase. In the event of a mains failure, the Power Cube switches to off-grid mode in under 20 ms. The inverter is rated for up to 5 kVA. Without sunlight, the storage system with two modules delivers around 4.5 kW. With a base load of 1 kW, the capacity is theoretically sufficient for just under ten hours.Max. apparent power in off-grid mode: 5,000 VAPeak apparent power (60 s): 6,000 VAMax. continuous current per phase: 7.2 AMax. unbalanced load power per phase: 1.6 kWSwitchover time: < 20 msBlack start: YesParallel operation: up to 4 devices Smart Home, Monitoring and SecurityAccording to the manufacturer, the Power Cube is designed for AI-supported energy management, dynamic electricity tariffs and virtual power plants (VPP). Interfaces: SG-Ready, remote control receiver, DRM, dry contact, meter connection, RS485, USB, Ethernet and Bluetooth. Monitoring via the FoxCloud 2.0 app or web portal via Wi-Fi, LAN or 4G.IP66 for the inverter and storage unitSurge protection Type II (PV and AC)RCMU, insulation testing, anti-islanding protectionDC switch integratedArc Fault Circuit Interrupter (AFCI): optionalFire protection function in the battery storage system Installation and certificationsInstallation: Floor-mounted, indoors or outdoorsInverter operating temperature: −25 to +60 °C (power limitation from 45 °C)Standby consumption: < 15 WInverter dimensions (W × H × D): 570 × 420 × 380 mm, 42.6 kgGrid standards: VDE-AR-N 4105, VDE 0126-1-1, EN 50549-1, CEI 0-21, G98, AS4777.2-2020, IEC 62116, IEC 61727, IEC 61683Safety/EMC of inverters: EN/IEC 62109-1/-2, IEC 61000-6-1/-2/-3, IEC 61000-4-2/3/4/5/6/8
Fox AIO H3-Ultra-10.0 hybrid inverter
FOX ESS Power Cube 12 kW with 19.20 kWh storage | HQ3-12.0-M hybrid inverter & 6x EQ3300 batteries
FOX ESS Power Cube 12 kW with 19.2 kWh – all-in-one, fully configuredThis configuration brings the FOX ESS Power Cube to its maximum storage capacity: the HQ3-12.0-M hybrid inverter and six EQ3300 battery modules form an all-in-one system with 19.2 kWh, of which around 17.3 kWh is usable. The inverter and storage system work together without any power limitation: the storage system is charged at up to 14.4 kW at any state of charge, delivers up to 12 kW and is theoretically full in around 80 minutes.With up to 24 kWp of PV capacity the system is designed for very large rooftop installations and high electricity demand around the clock. The inverter and battery modules are stacked on top of one another without any connecting cables. The integrated gateway with a 63 A bypass integrates the entire domestic power supply and automatically switches to off-grid operation with up to 12 kVA in the event of a power cut.Power Cube 12 kW / 19.2 kWh HighlightsAll-in-one, fully configured: Inverter, 6 battery modules and gateway in a single system19.2 kWh LFP battery, approx. 17.28 kWh usable (90 % DoD)12 kW hybrid inverter, three-phase, max. 13.2 kVAFull performance at any state of charge: 14.4 kW charging, 12 kW dischargingFast charging: theoretically fully charged in around 80 minutesUp to 24 kWp PV capacity on 3 MPP trackersWirelessly stacked: Inverter and battery without connecting cablesIntegrated gateway with a 63 A bypass for the entire domestic supplyEmergency power and off-grid operation with 12 kVA, up to 4.0 kW per phase, switchover time < 20 msBlack start from the battery is possibleIP66 for outdoor installationSmart: ready for AI mode, dynamic electricity tariffs and virtual power plants (VPP)VDE-AR-N 4105 certifiedAll-in-one: How the Power Cube is constructedWhen fully configured, the Power Cube consists of seven stacked units:Inverter: HQ3-12.0-M, three-phase, 12 kWStorage: 6 × EQ3300 battery modules, totalling 19.2 kWhGateway: integrated, with 63 A bypassMonitoring: Wi-Fi, LAN and 4G integrated, monitoring via FoxCloud 2.0The footprint remains compact at 570 × 380 mm, the system only expands upwards.HQ3-12.0-M hybrid inverterThe HQ3-12.0-M can handle up to 24 kWp of PV power across three independent MPP trackers. With a charging power of 14.4 kW and a rated power of 12 kW, it can also cope with high consumption peaks, such as when the heat pump, wallbox and household appliances are running simultaneously.PV inputMax. array power: 24,000 WMax. PV power: 24,000 WMax. voltage: 1,000 V (maximum operating voltage 950 V)MPPT voltage range: 120–950 V, 210–850 V at full loadStart-up voltage: 140 VNumber of MPPTs / strings per MPPT: 3 / 1+1+1Max. input current per MPPT: 20 A (short-circuit current 25 A)Max. input power per MPPT: 10,000 WAC output (grid)Rated power: 12,000 WMax. apparent power: 13,200 VAGrid connection: 400/230 V or 380/220 V, 3L/N/PE, 50/60 HzRated output current / max. current per phase: 18.2 A / 20.0 APower factor: 1 (adjustable from 0.8 capacitive to 0.8 inductive)Battery connectionBattery type: Lithium-ion (LFP)Battery voltage: 80–500 VMin. battery voltage at full AC load: 250 VMax. charging power / discharging power: 14,400 W / 12,000 WMax. charging/discharging current: 50 AEfficiencyMax. efficiency: 97.9 %European efficiency: 97.5 %PV to battery: 97.5 %Battery to AC: 97.2 %MPPT efficiency: 99.9 %EQ3300 battery storage system at full capacity – 19.2 kWhSix EQ3300 modules with LFP cells form a storage system with a capacity of 19.2 kWh and a nominal voltage of 384 V. This is the system’s maximum configuration. Due to the high system voltage, the battery currents remain well below the maximum of 50 A, even at full charging and discharging power. ModulesCapacityUsable (90 % DoD)Rated voltageStorage weight 26.40 kWhapprox. 5.76 kWh128 V72 kg 39.60 kWhapprox. 8.64 kWh192 V108 kg 412.80 kWhapprox. 11.52 kWh256 V144 kg 516.00 kWhapprox. 14.40 kWh320 V180 kg 6 (this configuration)19.20 kWhapprox. 17.28 kWh384 V216 kg Battery data (6 modules)Cell chemistry: LFP (LiFePO₄)Rated energy: 19.20 kWhRated voltage / operating voltage: 384 V / 348–438 VRecommended discharge current: 25 AMax. charging/discharging current: 50 APeak discharge current (60 s): 65 ACharging/discharging efficiency: > 95 % (at 25 °C, 0.3C)Depth of discharge: 90 %Operating temperature: Charging 0–55 °C, discharging −10–55 °C, with warm-up function in each case from −25 °CFire protection function: YesProtection rating: IP66Dynamic tariffs: plenty of storage, fast chargingWith a charging power of 14.4 kW, the 19.2 kWh storage unit is theoretically fully charged in around 80 minutes. This means that even during a brief low-price period, a large amount of energy can be stored and later discharged at up to 12 kW. According to the manufacturer, the Power Cube is designed for AI-supported energy management, dynamic trading and virtual power plants (VPP). The following are available for integration into the home technology:SG-Ready for heat pumpsRipple control receiver and DRMDry contactMeter connection, RS485, USB, Ethernet, BluetoothGateway with 63 A bypass and maximum emergency power reserveWhen connected to the grid, the entire household supply runs via the integrated gateway, with up to 63 A per phase. If the grid fails, the Power Cube switches to off-grid mode in under 20 ms and delivers the full 12 kVA, at any state of charge and even without sunshine. When fully configured, the maximum possible reserve is available: with a load of 1 kW, it is theoretically sufficient for over 17 hours.Max. apparent power in off-grid mode: 12,000 VAPeak apparent power (60 s): 14,400 VAMax. continuous current per phase: 17.4 AMax. unbalanced load power per phase: 4.0 kWSwitchover time: < 20 msBlack start: YesParallel operation: up to 4 devicesImportant for the emergency power supply: In the event of an overload, the system attempts to restore itself automatically up to three times (15 s each). After that, the fault must be reset manually. Your electrician will plan which consumers are to be supplied in an emergency.Monitoring with FoxCloud 2.0Wi-Fi, LAN and 4G are integrated. In the FoxCloud 2.0 app or on the web portal, you can view PV generation, storage level and consumption in real time. On the device itself, LED and LCD display the status, operation is via a capacitive touch sensor.Safety and protectionIP66 protection rating for inverter and storage systemSurge protection Type II (PV and AC)Residual current monitoring (RCMU), insulation measurement, anti-islanding protectionDC switch integratedReverse current protection for PV and batteryArc fault protection (AFCI): optionalFire protection function in the battery storage systemInstallation and dimensionsInstallation: Floor mounting, indoors or outdoorsProtection rating: IP66Inverter operating temperature: −25 to +60 °C (power limitation from 45 °C)Cooling: FanNoise level: < 55 dBStandby consumption: < 15 WInverter dimensions (W × H × D): 570 × 420 × 380 mm, 42.6 kgStorage dimensions, 6 modules (W × H × D): 570 × 810 × 380 mm, 216 kgWho is the 12 kW Power Cube with 19.2 kWh suitable for?Households with very large PV systems up to 24 kWpHouseholds with a heat pump, electric car and high electricity demand around the clockAnyone who wants maximum storage capacity at full power right from the startHouseholds with a dynamic electricity tariffAnyone who wants the longest possible and most powerful emergency power supplyFAQ FOX ESS Power Cube 12 kW inverter with 19.20 kWh storage What does “all-in-one” mean for the Power Cube?The inverter, battery storage system and gateway form one shared system. The components are stacked on top of one another and connected without additional cabling. This saves space and installation effort.How much electricity can this Power Cube store?The rated capacity is 19.2 kWh, of which around 17.28 kWh is usable at 90 % depth of discharge.Is 19.2 kWh the maximum configuration level?Yes. With six battery modules, the Power Cube is fully configured. No further modules can be added.How quickly is the storage system fully charged?With the max. charging power of 14.4 kW, the 19.2 kWh storage unit is theoretically fully charged in around 80 minutes. The actual charging time depends on available solar power, temperature and state of charge.