FOX ESS Power Cube 12 kW with 19.20 kWh storage | HQ3-12.0-M hybrid inverter & 6x EQ3300 batteries
€8,920.24
Prices include 19 % VAT, free delivery
Product information
FOX ESS Power Cube 12 kW with 19.2 kWh – all-in-one, fully configured
This configuration brings the FOX ESS Power Cube to its maximum storage capacity: the HQ3-12.0-M hybrid inverter and six EQ3300 battery modules form an all-in-one system with 19.2 kWh, of which around 17.3 kWh is usable. The inverter and storage system work together without any power limitation: the storage system is charged at up to 14.4 kW at any state of charge, delivers up to 12 kW and is theoretically full in around 80 minutes.
With up to 24 kWp of PV capacity the system is designed for very large rooftop installations and high electricity demand around the clock. The inverter and battery modules are stacked on top of one another without any connecting cables. The integrated gateway with a 63 A bypass integrates the entire domestic power supply and automatically switches to off-grid operation with up to 12 kVA in the event of a power cut.
Power Cube 12 kW / 19.2 kWh Highlights
- All-in-one, fully configured: Inverter, 6 battery modules and gateway in a single system
- 19.2 kWh LFP battery, approx. 17.28 kWh usable (90 % DoD)
- 12 kW hybrid inverter, three-phase, max. 13.2 kVA
- Full performance at any state of charge: 14.4 kW charging, 12 kW discharging
- Fast charging: theoretically fully charged in around 80 minutes
- Up to 24 kWp PV capacity on 3 MPP trackers
- Wirelessly stacked: Inverter and battery without connecting cables
- Integrated gateway with a 63 A bypass for the entire domestic supply
- Emergency power and off-grid operation with 12 kVA, up to 4.0 kW per phase, switchover time < 20 ms
- Black start from the battery is possible
- IP66 for outdoor installation
- Smart: ready for AI mode, dynamic electricity tariffs and virtual power plants (VPP)
- VDE-AR-N 4105 certified
All-in-one: How the Power Cube is constructed
When fully configured, the Power Cube consists of seven stacked units:
- Inverter: HQ3-12.0-M, three-phase, 12 kW
- Storage: 6 × EQ3300 battery modules, totalling 19.2 kWh
- Gateway: integrated, with 63 A bypass
- Monitoring: Wi-Fi, LAN and 4G integrated, monitoring via FoxCloud 2.0
The footprint remains compact at 570 × 380 mm, the system only expands upwards.
HQ3-12.0-M hybrid inverter
The HQ3-12.0-M can handle up to 24 kWp of PV power across three independent MPP trackers. With a charging power of 14.4 kW and a rated power of 12 kW, it can also cope with high consumption peaks, such as when the heat pump, wallbox and household appliances are running simultaneously.
PV input
- Max. array power: 24,000 W
- Max. PV power: 24,000 W
- Max. voltage: 1,000 V (maximum operating voltage 950 V)
- MPPT voltage range: 120–950 V, 210–850 V at full load
- Start-up voltage: 140 V
- Number of MPPTs / strings per MPPT: 3 / 1+1+1
- Max. input current per MPPT: 20 A (short-circuit current 25 A)
- Max. input power per MPPT: 10,000 W
AC output (grid)
- Rated power: 12,000 W
- Max. apparent power: 13,200 VA
- Grid connection: 400/230 V or 380/220 V, 3L/N/PE, 50/60 Hz
- Rated output current / max. current per phase: 18.2 A / 20.0 A
- Power factor: 1 (adjustable from 0.8 capacitive to 0.8 inductive)
Battery connection
- Battery type: Lithium-ion (LFP)
- Battery voltage: 80–500 V
- Min. battery voltage at full AC load: 250 V
- Max. charging power / discharging power: 14,400 W / 12,000 W
- Max. charging/discharging current: 50 A
Efficiency
- Max. efficiency: 97.9 %
- European efficiency: 97.5 %
- PV to battery: 97.5 %
- Battery to AC: 97.2 %
- MPPT efficiency: 99.9 %
EQ3300 battery storage system at full capacity – 19.2 kWh
Six EQ3300 modules with LFP cells form a storage system with a capacity of 19.2 kWh and a nominal voltage of 384 V. This is the system’s maximum configuration. Due to the high system voltage, the battery currents remain well below the maximum of 50 A, even at full charging and discharging power.
| Modules | Capacity | Usable (90 % DoD) | Rated voltage | Storage weight |
|---|---|---|---|---|
| 2 | 6.40 kWh | approx. 5.76 kWh | 128 V | 72 kg |
| 3 | 9.60 kWh | approx. 8.64 kWh | 192 V | 108 kg |
| 4 | 12.80 kWh | approx. 11.52 kWh | 256 V | 144 kg |
| 5 | 16.00 kWh | approx. 14.40 kWh | 320 V | 180 kg |
| 6 (this configuration) | 19.20 kWh | approx. 17.28 kWh | 384 V | 216 kg |
Battery data (6 modules)
- Cell chemistry: LFP (LiFePO₄)
- Rated energy: 19.20 kWh
- Rated voltage / operating voltage: 384 V / 348–438 V
- Recommended discharge current: 25 A
- Max. charging/discharging current: 50 A
- Peak discharge current (60 s): 65 A
- Charging/discharging efficiency: > 95 % (at 25 °C, 0.3C)
- Depth of discharge: 90 %
- Operating temperature: Charging 0–55 °C, discharging −10–55 °C, with warm-up function in each case from −25 °C
- Fire protection function: Yes
- Protection rating: IP66
Dynamic tariffs: plenty of storage, fast charging
With a charging power of 14.4 kW, the 19.2 kWh storage unit is theoretically fully charged in around 80 minutes. This means that even during a brief low-price period, a large amount of energy can be stored and later discharged at up to 12 kW. According to the manufacturer, the Power Cube is designed for AI-supported energy management, dynamic trading and virtual power plants (VPP). The following are available for integration into the home technology:
- SG-Ready for heat pumps
- Ripple control receiver and DRM
- Dry contact
- Meter connection, RS485, USB, Ethernet, Bluetooth
Gateway with 63 A bypass and maximum emergency power reserve
When connected to the grid, the entire household supply runs via the integrated gateway, with up to 63 A per phase. If the grid fails, the Power Cube switches to off-grid mode in under 20 ms and delivers the full 12 kVA, at any state of charge and even without sunshine. When fully configured, the maximum possible reserve is available: with a load of 1 kW, it is theoretically sufficient for over 17 hours.
- Max. apparent power in off-grid mode: 12,000 VA
- Peak apparent power (60 s): 14,400 VA
- Max. continuous current per phase: 17.4 A
- Max. unbalanced load power per phase: 4.0 kW
- Switchover time: < 20 ms
- Black start: Yes
- Parallel operation: up to 4 devices
Important for the emergency power supply: In the event of an overload, the system attempts to restore itself automatically up to three times (15 s each). After that, the fault must be reset manually. Your electrician will plan which consumers are to be supplied in an emergency.
Monitoring with FoxCloud 2.0
Wi-Fi, LAN and 4G are integrated. In the FoxCloud 2.0 app or on the web portal, you can view PV generation, storage level and consumption in real time. On the device itself, LED and LCD display the status, operation is via a capacitive touch sensor.
Safety and protection
- IP66 protection rating for inverter and storage system
- Surge protection Type II (PV and AC)
- Residual current monitoring (RCMU), insulation measurement, anti-islanding protection
- DC switch integrated
- Reverse current protection for PV and battery
- Arc fault protection (AFCI): optional
- Fire protection function in the battery storage system
Installation and dimensions
- Installation: Floor mounting, indoors or outdoors
- Protection rating: IP66
- Inverter operating temperature: −25 to +60 °C (power limitation from 45 °C)
- Cooling: Fan
- Noise level: < 55 dB
- Standby consumption: < 15 W
- Inverter dimensions (W × H × D): 570 × 420 × 380 mm, 42.6 kg
- Storage dimensions, 6 modules (W × H × D): 570 × 810 × 380 mm, 216 kg
Who is the 12 kW Power Cube with 19.2 kWh suitable for?
- Households with very large PV systems up to 24 kWp
- Households with a heat pump, electric car and high electricity demand around the clock
- Anyone who wants maximum storage capacity at full power right from the start
- Households with a dynamic electricity tariff
- Anyone who wants the longest possible and most powerful emergency power supply
FAQ FOX ESS Power Cube 12 kW inverter with 19.20 kWh storage
What does “all-in-one” mean for the Power Cube?
The inverter, battery storage system and gateway form one shared system. The components are stacked on top of one another and connected without additional cabling. This saves space and installation effort.
How much electricity can this Power Cube store?
The rated capacity is 19.2 kWh, of which around 17.28 kWh is usable at 90 % depth of discharge.
Is 19.2 kWh the maximum configuration level?
Yes. With six battery modules, the Power Cube is fully configured. No further modules can be added.
With the max. charging power of 14.4 kW, the 19.2 kWh storage unit is theoretically fully charged in around 80 minutes. The actual charging time depends on available solar power, temperature and state of charge.
| Battery technology: | LiFePO4 |
|---|---|
| Battery voltage range: | 348 ~ 438 V |
| Communication: Inverters: | Meter, Wi-Fi/4G (optional), Bluetooth, DRM, Ethernet, USB, BMS (CAN), RS485, remote control unit, SG-compatible, dry contact |
| Communication with BMS: | CAN |
| Dimensions (W x D x H): | 570 x 380 x 1230 mm |
| Ingress protection rating for inverters: | IP66 |
| MPPT efficiency: | 99.90 % |
| MPPT trackers / strings per tracker: | 3 / 1+1+1 |
| MPPT voltage range: | 120–950 V |
| Max. AC apparent power: | 13.20 kVA |
| Max. DC input power: | 24,000 W |
| Max. DC input voltage: | 1000 V |
| Max. PV input current: | 20 + 20 + 20 A |
| Max. charge/discharge current: | 50 A / 50 A |
| Max. efficiency: | 97.90 % |
| Max. short-circuit current: | 25 + 25 + 25 A |
| Nominal DC voltage: | 620 V |
| Nominal voltage of storage units: | 384 V |
| Off-grid operation (stand-alone / off-grid): | Yes |
| Operating temperature (charging / discharging): | 0 °C to +55 °C / -10 °C to +55 °C |
| Permissible humidity: | 0 - 100% |
| Protection class for storage systems: | IP66 |
| Rated AC active power: | 12 kW |
| Safety / EMC / Standards: | EN/IEC 62109-1, EN/IEC 62109-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3, IEC 61000-4-2/3/4/5/6/8 / AS4777.2-2020, VDE-AR-N 4105, VDE 0126-1-1, G98, EN 50549-1, CEI 0-21, IEC 62116, IEC 61727, IEC 61683 |
| Starting voltage: | 140 V |
| Storage certifications: | IEC 62619 / EN IEC 61000-6-1/2/3/4 / UN38.3 |
| System capacity (rated value): | 19.20 kWh |
| Type: | ALL-IN-ONE Hybrid Storage System |
| Warranty: | 10 years |
Login