Balcony power stations
The Durasun Balcony Power Plant 800 W with 920 W solar output is a powerful complete set for the simple generation of your own solar power. With two solar modules and an 800-watt microinverter, the set is optimally designed for the feed-in power permitted in Germany for balcony power plants.The high module output of a total of 920 Wp ensures that as much solar energy as possible can be generated even in changing light conditions, cloud cover or non-ideal orientation. The included inverter converts the direct current generated by the modules into standard household alternating current, which can be used directly via the home mains supply.Highlights at a glance800 W feed-in power: Ideal for modern balcony power plants and the maximum use of the statutory power limit.920 W solar output: High module output for strong yields even in less ideal light conditions.Complete set for self-consumption: Generated solar power is used directly in the household and can reduce electricity costs.Microinverter included: Reliably converts the generated direct current into usable alternating current.Easy installation: Suitable for balcony, terrace, garden, garage or flat roof.Weatherproof components: Designed for permanent outdoor use.Efficient solar power use: The higher module output helps to utilise the inverter optimally over longer periods.Areas of applicationThe Durasun Balcony Power Plant 800 W with 920 W solar output is ideal for:Balconies: For simple installation on the balcony railing and direct use of the generated solar power.Terraces & gardens: Perfect for freestanding installation with a suitable bracket.Garages & flat roofs: Ideal for space-saving installation on suitable roof surfaces.Households with base load consumption: Particularly useful for consumers such as fridge, router, standby devices or office electronics.Installation & safety instructionsChoose a suitable installation site: For maximum yields, the solar modules should be aligned with as little shading as possible.Stable mounting: Use a suitable bracket for balcony, roof, wall or ground installation.Check the grid connection: The connection should be made via a suitable outdoor socket.No expansion without inspection: The set is optimised for 800 W output power. Expansion with additional modules or inverters should only be carried out after technical inspection.Behaviour in the event of a power cut: The inverter switches off automatically for safety reasons if there is no mains voltage.Features ProductDurasun Balcony Power Plant 800 W with 920 W solar output Solar output920 Wp Maximum output power800 W System typeBalcony power plant / mini PV system InverterNEP microinverter BDM-800 Solar modules2 x JA Solar JAM54D41-LR 460 W glass-glass full black (N-Type) UseDirect self-consumption in the household Suitable forBalcony, terrace, garden, garage, flat roof Type of currentConversion of direct current into alternating current Scope of delivery1 x NEP microinverter BDM-800 – 800 W for balcony power plants2 x JA Solar JAM54D41-LR – 460 W glass-glass full black (N-Type)2 x solar extension cable 1 m 4 mm² – red/black for solar systems (set)1 x Betteri to Schuko connection cable (5 m) – incl. AK5S-2 plug (IP65)FAQs on the Durasun Balcony Power Plant 800 W with 920 W solar outputWhat does 920 W solar output mean with 800 W output power?The solar modules together deliver a maximum output of 920 Wp. The inverter feeds a maximum of 800 W into the home mains network. The higher module output ensures that the inverter can more often achieve high output even in cloudy conditions, unfavourable orientation or weaker sunlight.Can I supply my entire household with the balcony power plant?A balcony power plant is primarily intended to reduce the base load consumption in the household. It can, for example, support consumers such as fridge, router, lighting, standby devices or office electronics, but it does not replace a large photovoltaic system.What happens in the event of a power cut?In the event of a power cut, the inverter switches off automatically. This is an important safety function so that no electricity is fed into the public grid while work is being carried out on it.Can the set be expanded?The Durasun Balcony Power Plant is designed for an output power of 800 W. Expansion with additional modules or another inverter is not possible without further ado and should be checked in advance both technically and legally.
The NEP BDM-800 (Northern Electric & Power) is a powerful, dual microinverter specially designed for modern balcony power plants. With a maximum output of 800 Watt it fully exploits the legal feed-in limits and ensures maximum yield.A key advantage of this model over many competitors is the already permanently integrated WLAN module. You do not need an additional base station (like a DTU) to read out the yield data. The inverter connects directly to your home router. Thanks to two independent MPPT trackers, it individually controls two connected solar modules, which optimises the overall yield especially in case of partial shading or different orientations (e.g. east/west).Highlights at a glanceHigh output power (800 watts): Reliably feeds up to 800 VA into the home grid, ideal for maximum yield from standard balcony power plants.Integrated WLAN: No external gateway or additional stick required; the device sends yield data straight to the free NEPViewer app.Two independent MPPT trackers: Guarantees the best yield from each of the two modules, even if one is partially shaded.Integrated NA protection: Complies with the German standard VDE-AR-N 4105 (including integrated relay) for safe and legal operation in Germany.High module compatibility: Handles high input currents and is therefore ideally suited for modern high-performance modules (400W to 600W+ per input).Robust & weatherproof: The aluminium housing is dust- and waterproof to IP67 and built for decades of outdoor use.Areas of applicationThe NEP BDM-800 is the uncomplicated all-rounder for:Balcony power plants (2 modules): The classic "plug & play" unit on the balcony railing for immediate reduction in the electricity bill.Garden & flat roof installation: Ideal, as the unit can be mounted outdoors directly behind the elevated modules thanks to IP67.Smart homes: For users who wish to monitor their electricity generation conveniently and without additional hardware on their smartphone (iOS/Android).Assembly & Safety InstructionsWLAN reception at the installation site: As the WLAN module is located in the metal housing of the inverter, please check with your smartphone before permanent installation whether sufficient WLAN signal from your router still reaches the balcony/roof.Ventilation: The inverter uses its casing as a heat sink. Do not mount it directly on combustible materials and allow space to the rear of the module so that air may circulate.Throttling possible: If your local grid operator still insists on 600 watts, the NEP BDM-800 can usually be throttled in a certified manner via support or the app (and later increased back to 800W). Features ModelNEP BDM-800 Max. recommended PV power**2 x 600 Wp** Maximum output power**800 VA** Number of MPPT / Inputs**2 MPPT** (independent) Max. DC input voltage**60 V** Max. input current (DC)**2 x 17 A** Communication**WiFi integrated** (2.4 GHz) Efficiency (Max.)**97.3 %** Protection class**IP67** (weatherproof) Dimensions (W x H x D)268 x 250 x 42 mm FAQs about the NEP BDM-800Do I need an extra antenna or a gateway for the app?No. The WLAN module and the antenna are already invisibly integrated in the housing of the BDM-800. You only need to connect the device to your home network (2.4 GHz) via the app during initial setup.Which plugs do I need to connect to the socket?The device usually has a standardised AC connection (often type Betteri BC01). To connect to the socket you need a suitable connection cable "Betteri to Schuko" (or to Wieland plug), long enough for your setup.What happens if my router fails? Will the NEP still produce electricity?Yes, absolutely. The WLAN connection is used purely for reading the statistics and yields in the app. As soon as the sun is shining and there is grid voltage, the inverter feeds electricity into your home grid – completely independently of the internet.
The Deye SUN-M80G4-EU-Q0 800W micro-inverter is the ideal solution for your balcony power plant. With this powerful inverter, you can efficiently convert solar energy into usable household electricity and directly reduce your electricity costs.Your benefits at a glanceMaximum efficiencyTwo independent MPPT trackers ensure the best possible yield from your solar panels, even in partial shade.Smart monitoringThanks to the built-in Wi-Fi module, you can monitor your electricity production anytime, anywhere via the free smartphone app.Weatherproof and safeWith an IP67 rating, the housing is completely dust- and waterproof, making it ideal for long-term outdoor use.Easy installationCommissioning is quick and straightforward via secure plug connections based on the tried-and-tested plug-&-play principle.Reliable energy management for your homeThe Deye micro-inverter acts as the intelligent heart of your mini solar system. It reliably converts the DC power generated into grid-compliant AC power, which flows directly into your home’s electrical system. This automatically covers the continuous power requirements of your base-load appliances, such as fridges, Wi-Fi routers or devices on standby. Advanced control technology ensures that the absolute maximum output is extracted from every hour of sunshine. This means your investment pays for itself quickly and you gain greater independence from rising energy prices.Technical specificationsInput (DC – direct current)The recommended PV power output is 210 to 560 W per input. The inverter features 2 independent MPP trackers. The maximum input voltage is 60 V, the MPPT voltage range is 25 V to 55 V and the start voltage is 20 V. The maximum input current is 2 × 13.0 A, the maximum short-circuit current is 2 × 19.5 A.Output (AC – alternating current)The rated AC power is 800 W or 800 VA and can be throttled via the app. The rated voltage is 220 / 230 V single-phase, the rated frequency 50 / 60 Hz. The maximum output current is 3.7 A. The power factor is > 0.99 and is adjustable from 0.8 lead to 0.8 lag. The total harmonic distortion (THDi) is less than 3%.EfficiencyThe maximum efficiency is 96.5%, the Euro efficiency is 96.0%. The MPPT efficiency is over 99%. Night-time consumption is less than 50 mW.General data (Mechanical & Environmental)Dimensions: 280.5 × 190 × 40 mm. Weight: approx. 3.0 kg. IP67 protection rating ensures dust and water resistance. Operating temperature range: -40 °C to +65 °C. Cooling via natural convection, fanless.Safety & FeaturesCommunication takes place via integrated Wi-Fi (2.4 GHz) for app monitoring. NA protection is implemented via an integrated relay in accordance with VDE-AR-N 4105. Protection functions include DC reverse polarity protection, short-circuit protection, anti-islanding, as well as overcurrent and overvoltage protection. The manufacturer’s warranty is 15 years.Contents1x Deye SUN-M80G4-EU-Q0 micro inverter1x Wi-Fi antenna1x User and Installation Manual
The Deye 2000W SUN-M200G4-EU-Q0 micro-inverter has been specially developed for balcony power plants and compact PV systems. With 2000 W AC output power and four MPPT trackers, it ensures a particularly high energy yield per module – even with varying orientations or partial shading. Its simple plug-and-play installation and modern app control via Wi-Fi make it the ideal choice for anyone wishing to implement sustainable power generation conveniently and efficiently.Innovative technology for maximum efficiencyThe Deye micro-inverter combines modern inverter technology with high efficiency and a compact design. Thanks to four independent MPPT inputs, each connected PV module is optimised individually. This allows high yields to be achieved even with complex module configurations or changing light conditions.Key benefits at a glanceFour MPPT inputsFour independent MPPT trackers enable optimal module monitoring and maximum energy yields per module.High efficiencyWith a maximum efficiency of up to 96.5% and an MPPT efficiency of over 99%, the solar energy fed into the grid is utilised particularly efficiently.WeatherproofThe IP67-certified housing reliably protects the inverter from dust and water, enabling safe outdoor use.Compatible with battery storage systemsThe inverter supports many standard battery storage systems for the temporary storage of solar energy.Long-term securityDeye The unit comes with a 15-year manufacturer’s warranty, offering long-term investment security.App control via Wi-FiThe integrated Wi-Fi function enables seamless monitoring and control via mobile devices.Technical highlightsRecommended module sizeSuitable for four solar panels, each with a recommended power output of 210 to 700 W.DC inputThe maximum DC input voltage is 55 V. The MPPT voltage range is between 34.5 and 55 V. The maximum DC current is 18 A.AC outputThe rated power is 2000 W with a apparent power of 2000 VA. The mains connection is via L+N+PE at 220/230 V. The frequency is adjustable to 50 Hz or 60 Hz.Grid quality and operationThe power factor ranges from 0.95 leading to 0.95 lagging. The THDi value is less than 3%. Cooling is provided silently via natural convection.Communication and designCommunication is via Wi-Fi. The device measures 311 × 250.5 × 36.5 mm and weighs 5.1 kg. The IP67 protection rating makes the inverter particularly robust for outdoor use.Efficiency and warrantyThe maximum efficiency is 96.5%, with MPPT efficiency exceeding 99%. Furthermore, Deye offers a 15-year warranty on the unit. Contents1 x Deye 2000W SUN-M200G4-EU-Q0 micro inverter
KSENG Adjustable Universal Solar Mounting Bracket (Black Anodised)
The Anker SOLIX BP5000 expansion battery is the ideal storage extension for the Anker SOLIX Solarbank 4 E5000 Pro. With around 5 kWh of additional capacity per module, you can flexibly scale your energy system to your requirements. Thanks to modern lithium iron phosphate technology, the BP5000 offers high safety standards, a long service life and reliable performance – perfect for high-performance systems and households looking to store more solar power.The Anker SOLIX BP5000 can be combined with the existing Solarbank system on a modular basis, gradually increasing the total capacity. With its compact dimensions and a 10-year warranty, the BP5000 is a durable addition to modern balcony power station and PV storage solutions.Product featuresPerformanceThe expansion battery offers a capacity of 5.0 kWh per module at a nominal voltage of 16 V DC and a maximum charge and discharge current of 180 A.ScalabilityThe BP5000 is designed as an expansion battery for use with the Solarbank 4 Pro and enables a modular expansion of the total capacity.SafetyThe LiFePO₄ cells offer protection against overcharging, deep discharge, overcurrent and overheating, thereby ensuring safe and stable operation.Compact designThe space-saving design, measuring approx. 460 × 254 × 332.5 mm and weighing approx. 42 kg, allows for easy integration even where space is limited.InstallationIntegration into existing Solarbank systems is simple via Plug & Play and enables rapid expansion without the need for complex modifications.DurabilityThanks to its IP66 protection rating, the extension battery is suitable for both indoor and outdoor use and features a robust design.Durability and warrantyThe Anker SOLIX BP5000 is designed for a long service life of up to 15 years with consistent performance. Anker also provides a 10-year manufacturer’s warranty.Technical specifications Model nameAnker SOLIX BP5000 Expansion Battery Battery cell typeLithium iron phosphate (LiFePO₄) Energy / Capacity5.024 kWh Nominal voltage16 V DC Charge/discharge currentmax. 180 A Rated power2,500 W Capacity314 Ah Communication interfaceIntegration via Solarbank system Dimensions & Weightapprox. 460 × 254 × 332.5 mm / approx. 42 kg Operating locationIndoor and outdoor use Operating temperature−20 °C to +55 °C Protection ratingIP66 Protection classClass I Maximum operating altitudeup to 4,000 m Warranty10 years Scope of delivery1x Anker SOLIX BP5000 expansion batteryOptional: Expandable with additional BP5000 batteries in combination with the Anker SOLIX Solarbank 4 E5000 Pro.
The Anker SOLIX Solarbank 4 E5000 Pro, including the Smart Meter, is a high-performance low-voltage battery storage system from Anker’s latest SOLIX generation. With a storage capacity of around 5 kWh and a PV input power of up to 5000 W, the Solarbank is ideal for demanding households and high-output balcony power stations. Thanks to modern lithium iron phosphate technology, the system offers a high level of safety, a long service life and reliable performance in day-to-day use.Up to 12 solar panels can be flexibly connected via 4 MPPT channels. In combination with the included smart meter, the Anker SOLIX Solarbank 4 E5000 Pro can intelligently monitor and control the flow of energy in the home. The system enables optimised self-consumption as well as backup and off-grid operation – for maximum energy independence.Product featuresPerformanceThe Anker SOLIX Solarbank 4 E5000 Pro operates at a nominal voltage of 16 V DC, with a maximum charge and discharge current of 180 A, a nominal power output of 2,500 W and a usable capacity of 5.0 kWh.ScalabilityThe storage capacity can be flexibly adapted to individual energy requirements using BP5000 extension batteries.SafetyLithium iron phosphate technology provides protection against overvoltage and undervoltage, overcurrent, short circuits, overcharging, deep discharge and overheating. With an IP66 protection rating and a permissible operating altitude of up to 4,000 m, the system is designed for demanding operating conditions.Compact design and ease of installationWith a compact design measuring approx. 460 × 305 × 355 mm and weighing approx. 50 kg, the system can be installed quickly and easily. Plug-and-play set-up takes just a few seconds.Emergency power capabilityBackup and off-grid operation are possible. The Solarbank provides an output power of up to 2,500 W.Smart integrationThe integrated inverter handles up to 5,000 W of PV input power via 4 MPPT channels. Control is via Wi-Fi and Bluetooth, as well as via the Anker Intelligence smart energy optimisation system.Premium design and warrantyIts robust IP66-rated construction, modern premium design and 10-year manufacturer’s warranty make the Anker SOLIX Solarbank 4 E5000 Pro a high-quality storage solution for high-performance balcony power stations and domestic applications.Technical specifications Model nameAnker SOLIX Solarbank 4 E5000 Pro Battery cell typeLithium iron phosphate (LiFePO₄) Energy / Capacity5.024 kWh Nominal voltage16 V DC PV inputup to 5,000 W (4 MPPT) MPPT voltage range16 – 50 V DC Max. PV input voltage60 V DC Charge/discharge currentmax. 180 A Rated power2,500 W AC output600 / 790 / 800 / 2,500 W AC inputup to 3,600 W Depth of discharge (DoD)100% usable Communication interfaceWi-Fi, Bluetooth Protection featuresOvervoltage, undervoltage, overcurrent, short circuit, overtemperature, overcharge, deep discharge Dimensions & Weightapprox. 460 × 305 × 355 mm / approx. 50 kg Place of useIndoor and outdoor use Operating temperature / humidity-20 °C to +55 °C / up to 100% relative humidity Protection ratingIP66 Cooling methodPassive (natural convection) Installation methodFloor or wall mounting Warranty10 years Contents of the package1x Anker SOLIX Solarbank 4 E5000 Pro1x Anker SOLIX Smart MeterOptional: The final contents of the package may vary depending on the variant. The storage capacity of the Anker SOLIX Solarbank 4 E5000 Pro can be expanded with compatible extension batteries such as the Anker SOLIX BP5000 extension battery.