KSENG Adjustable Solar Universal Mounting Bracket (Black Anodised)

 The Durasun Balcony Power Plant 800 W with 920 W solar output is a powerful complete set for the simple generation of your own solar power. With two solar modules and an 800-watt microinverter, the set is optimally designed for the feed-in power permitted in Germany for balcony power plants.The high module output of a total of 920 Wp ensures that as much solar energy as possible can be generated even in changing light conditions, cloud cover or non-ideal orientation. The included inverter converts the direct current generated by the modules into standard household alternating current, which can be used directly via the home mains supply.Highlights at a glance800 W feed-in power: Ideal for modern balcony power plants and the maximum use of the statutory power limit.920 W solar output: High module output for strong yields even in less ideal light conditions.Complete set for self-consumption: Generated solar power is used directly in the household and can reduce electricity costs.Microinverter included: Reliably converts the generated direct current into usable alternating current.Easy installation: Suitable for balcony, terrace, garden, garage or flat roof.Weatherproof components: Designed for permanent outdoor use.Efficient solar power use: The higher module output helps to utilise the inverter optimally over longer periods.Areas of applicationThe Durasun Balcony Power Plant 800 W with 920 W solar output is ideal for:Balconies: For simple installation on the balcony railing and direct use of the generated solar power.Terraces & gardens: Perfect for freestanding installation with a suitable bracket.Garages & flat roofs: Ideal for space-saving installation on suitable roof surfaces.Households with base load consumption: Particularly useful for consumers such as fridge, router, standby devices or office electronics.Installation & safety instructionsChoose a suitable installation site: For maximum yields, the solar modules should be aligned with as little shading as possible.Stable mounting: Use a suitable bracket for balcony, roof, wall or ground installation.Check the grid connection: The connection should be made via a suitable outdoor socket.No expansion without inspection: The set is optimised for 800 W output power. Expansion with additional modules or inverters should only be carried out after technical inspection.Behaviour in the event of a power cut: The inverter switches off automatically for safety reasons if there is no mains voltage.Features ProductDurasun Balcony Power Plant 800 W with 920 W solar output Solar output920 Wp Maximum output power800 W System typeBalcony power plant / mini PV system InverterNEP microinverter BDM-800 Solar modules2 x JA Solar JAM54D41-LR 460 W glass-glass full black (N-Type) UseDirect self-consumption in the household Suitable forBalcony, terrace, garden, garage, flat roof Type of currentConversion of direct current into alternating current Scope of delivery1 x NEP microinverter BDM-800 – 800 W for balcony power plants2 x JA Solar JAM54D41-LR – 460 W glass-glass full black (N-Type)2 x solar extension cable 1 m 4 mm² – red/black for solar systems (set)1 x Betteri to Schuko connection cable (5 m) – incl. AK5S-2 plug (IP65)FAQs on the Durasun Balcony Power Plant 800 W with 920 W solar outputWhat does 920 W solar output mean with 800 W output power?The solar modules together deliver a maximum output of 920 Wp. The inverter feeds a maximum of 800 W into the home mains network. The higher module output ensures that the inverter can more often achieve high output even in cloudy conditions, unfavourable orientation or weaker sunlight.Can I supply my entire household with the balcony power plant?A balcony power plant is primarily intended to reduce the base load consumption in the household. It can, for example, support consumers such as fridge, router, lighting, standby devices or office electronics, but it does not replace a large photovoltaic system.What happens in the event of a power cut?In the event of a power cut, the inverter switches off automatically. This is an important safety function so that no electricity is fed into the public grid while work is being carried out on it.Can the set be expanded?The Durasun Balcony Power Plant is designed for an output power of 800 W. Expansion with additional modules or another inverter is not possible without further ado and should be checked in advance both technically and legally.

The solar extension cable set (3 metres, 4mm²) is the ideal solution for short distances within a photovoltaic installation. If you need to bridge short distances between your solar modules or want to connect to a nearby inverter or charge controller – for example, on a balcony, a garage roof or in the camping area – this set offers a secure and virtually loss-free connection.The set includes two high-quality, double-insulated solar cables: one red cable for the positive terminal (+) and one black cable for the negative terminal (-). Both ends are professionally pre-assembled with MC4-compatible plugs and sockets. Thanks to the short length of 3 metres and the solid cross-section of 4mm², this set is ideally suited for almost all common PV applications (balcony systems, off-grid systems, roof systems).Highlights at a glanceOptimal short-distance solution: With 3 metres in length, ideal for connecting modules in a string or for direct connection of microinverters.Plug & Play installation: The cables are pre-assembled on both sides with MC4-compatible connectors, so that no special tools are required for crimping.Secure identification: The colour coding in red (+) and black (-) makes installation easier and effectively prevents incorrect polarity.Weatherproof & durable: The special jacket made from cross-linked polyolefin is UV-resistant, ozone-resistant and withstands extreme temperatures from -40°C to +90°C.Protection rating IP67: When plugged in, the connectors are absolutely dustproof and protected against splashing water and rain.High-quality conductor: Tinned electrolytic copper ensures excellent corrosion resistance and permanently high conductivity.Areas of applicationThis 3-metre extension is designed for a wide range of application scenarios:Balcony systemsPerfect for bridging the distance between the solar modules and the microinverter mounted directly behind or below them.String cablingBridging gaps between rows of modules on pitched roofs or flat roof elevations.Motorhomes & boatsConnecting solar modules to the charge controller in compact spaces where long cable runs are not required.Assembly & safety instructionsMinimal voltage dropWith a length of only 3 metres, the voltage drop is negligibly small. For both 12V/24V off-grid systems and high-voltage systems, this cross-section is technically perfectly dimensioned for this length.Strain reliefSecure the cables with UV-resistant cable ties to the mounting frame. Avoid mechanical stress on the plug-in connections and the module junction boxes.Correct latchingWhen connecting, ensure that the MC4 connectors audibly snap into place. This is the only way the connection will remain permanently watertight and safe from arcing. Features ModelSolar extension cable set (3m) Conductor cross-section**4.0 mm²** Cable length**3.0 metres** (per colour) Rated voltageUp to 1000V / 1500V DC Plug type**MC4 compatible** (IP67) Temperature range-40°C to +90°C Insulation materialCross-linked polyolefin (LSZH) Protection rating**IP67** (plugged in) Special featureUV- & ozone-resistant, acid-resistant FAQs about the solar extension cable 3mIs 4mm² enough for my 800W balcony system?Yes, absolutely. With 3 metres and a typical current of about 10–13 amperes, the resistance is so low that there are practically no measurable losses. 4mm² is standard here and is fully sufficient.Can I also leave these cables outdoors?Yes, that's what they're made for. The cables are certified according to standard PV norms. They are resistant to ammonia, ozone and UV radiation and can be used outdoors for decades.Do the connectors fit modules from Trina, Jinko or JA Solar?Yes. These manufacturers use MC4 or compatible systems (like EVO2) as standard. The connectors on this extension cable fit perfectly, both mechanically and electrically, to these module connectors.