1 phase inverter
The Deye SUN-6K-SG05LP1-EU is a state-of-the-art and powerful single-phase hybrid inverter that functions as an intelligent hub for larger photovoltaic systems. It has been developed to offer you maximum independence, efficiency, and security of supply. With a high output power of 6 kW, it manages the energy flows between your solar panels, the battery storage and the public power grid. Thanks to its integrated emergency power function, you are reliably supplied with high performance even in the event of a power failure.Highlights at a glanceIntelligent hybrid system: Manages PV generation, battery storage and mains consumption for maximum self-consumption.High performance: With 6 kW output, ideal for larger households, heat pumps or small businesses.Integrated emergency power supply: Provides uninterrupted power supply (UPS level) during mains failure.Two MPP trackers: Enables connection of two independent module fields, ideal for east-west roofs or partial shading.Flexible battery connection: Compatible with a wide range of 48V low-voltage batteries.Comprehensive monitoring: Integrated Wi-Fi module for simple and intuitive system monitoring via app.Smart energy management for your homeThe Deye hybrid inverter is more than just a converter from DC to AC. It is the brain of your energy supply. During the day, it supplies your loads directly with solar power, while surplus energy is stored in your battery for use at night or on cloudy days. Only when the storage is full and no load needs electricity is the energy fed into the public grid. This way, you maximise your self-consumption and significantly reduce your electricity costs.Maximum yields through flexible PV connectionThanks to the two integrated MPP trackers (Maximum Power Point), the Deye SUN-6K offers maximum flexibility in planning your PV system. You can connect two separate module strings with different orientations (e.g. east and west sides of the roof) or with different module types. Each tracker optimises the output of its string individually, so you always achieve the maximum possible energy yield, even in complex roof situations or partial shading.Independence through integrated emergency power supplyA special feature of this inverter is the integrated emergency power function. In the event of a failure of the public power grid, the device switches to a separate emergency power output in less than 10 milliseconds and continues to supply selected critical loads such as lighting, refrigerator or IT infrastructure with power from the battery storage. This UPS-level (Uninterruptible Power Supply) switching time ensures maximum supply reliability. Features ModelDeye SUN-6K-SG05LP1-EU Battery input data Battery typeLead-acid or Li-ion Battery voltage range (V)40~60 Max. charging current (A)140 Max. discharging current (A)140 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)9600 Nominal PV input voltage (V)370 Starting voltage (V)80 MPP voltage range (V)125-425 Max. DC input voltage (V)550 PV input current (A)13+22 Max. PV short-circuit current (A)17+28.6 Number of MPPT2 Strings per MPPT1+2 AC output data AC nominal power and UPS power (W)6000 Max. AC output power (W)6600 AC output nominal current (A)27.3 Maximum AC output nominal current (A)30 Max. continuous AC throughput (A)40 Peak power (without grid)2 times nominal power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Total harmonic distortion (THD)< 3% ( nominal power ) Direct current feed<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97,00% MPPT efficiency>99% Protection FusesIntegrated lightning protection, anti-islanding, reverse polarity protection, short circuit protection, overload protection, and much more. Surge categoryDC Type II/AC Type II Certifications and standards Grid approvalsVDE4105, IEC61727/62116, VDE0126, EN50549-1, CEI 0-21, AS4777, NRS2017, G98, G99, etc. Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range ( ℃ )-45~60°C, >45° C power derating CoolingIntelligent cooling Noise (dB)<30 dB Communication with BMSRS485; CAN Weight (kg)15 Size (mm)330B×580H×232T Degree of protectionIP65 Installation styleWall mount Warranty10 years FAQs about the Deye SUN-6K-SG05LP1-EU hybrid inverterWhat exactly does "hybrid inverter" mean?A hybrid inverter can manage energy from several sources at the same time. It acts as the interface between the solar panels, the battery storage and the public power grid. It intelligently decides whether the solar power generated is used directly, stored in the battery or fed into the grid.Who is a 6 kW inverter suitable for?A 6 kW inverter is ideal for larger detached houses with higher electricity consumption, for example due to use of a heat pump or an electric vehicle. It is also suitable for small businesses or agricultural operations that want to optimise their own consumption.Which batteries are compatible with this inverter?The Deye SUN-6K is designed for use with 48V low-voltage (LV) lithium-ion battery storage systems. It is compatible with many leading manufacturers. The full compatibility list can be found on the manufacturer's website.Do I need any additional devices for the emergency power function?The inverter has an integrated emergency power output (EPS port). For use, the emergency loads to be supplied must be placed on a separate circuit by a qualified electrician and connected to this output. An additional external transfer switch is generally not required. Scope of delivery: Deye SUN-6K-SG05LP1-EU (6 kW Single-Phase Hybrid Inverter) 1 x Deye SUN-6K-SG05LP1-EU inverterA high-performance single-phase hybrid inverter with 6 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA robust metal mounting rail for secure installation of the device on a load-bearing wall.1 x Wi-Fi Stick (Data Logger)A plug-in communication module for connecting to the Internet for remote monitoring via Deye Cloud or Solarman App.1 x Current Transformer (CT)An external split current transformer for measuring energy flows at the property connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The necessary pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x Communication Cable (BMS)A pre-assembled RJ45 data cable for connection between the inverter and the battery management system.1 x Installation Kit (Screws and Plugs)A set of stainless steel screws and heavy-duty wall plugs for professional installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, wiring diagrams and important safety information.
The Deye SUN-8K-SG05LP1-EU-AM2-P is a high-performance, single-phase hybrid inverter, specially developed to meet the requirements of modern households with high energy demands. With an impressive rated output power of 8 kW it is one of the most powerful single-phase units in its class and enables comprehensive optimisation of self-consumption as well as a seamless emergency power supply.The "P" series is intended for use with high-current PV modules optimised. Thanks to an increased input current of up to 26 A per MPPT, state-of-the-art solar panels with large cell formats and high yields can be efficiently integrated. As a low-voltage hybrid, the device operates with 48 V batteries combined, allowing for flexible and cost-effective scaling of the storage system.Highlights at a glanceImpressive 8 kW single-phase power: Ideal for households with high loads that require strong single-phase protection or high charging power for batteries.High-current PV inputs (26 A): Perfectly matched to the latest generation of high-performance modules to maximise solar yields.48 V low-voltage system: Fully compatible with a wide range of affordable and modularly expandable 48 V battery storage systems (e.g. LiFePO4 from Deye or Pylontech).High charging/discharging current (190 A): Enables rapid charging of large storage capacities and the powering of energy-intensive devices directly from the battery.Genuine emergency power output (UPS): Switches to island mode in less than 4 ms in the event of a mains failure, ensuring that even sensitive electronics are protected without interruption.2 MPPT trackers: Offers flexibility in roof coverage and optimises yield for different orientations or partial shading.Smart Load & AC-Coupling: Surplus energy can be specifically used for consumers such as heat pumps; furthermore, existing inverters can be easily integrated.Areas of applicationLarge detached housesMaximising self-sufficiency by combining high PV output with large, cost-effective 48 V storage systems.Backup & stand-alone solutionsThanks to its high output of 8 kW, it is ideally suited for off-grid systems or for providing full backup during critical periods in regions with an unstable grid.RetrofitCan be installed in parallel with existing solar systems via AC coupling to enhance them with a high-performance storage function.Installation & safety instructionsBattery wiringDue to the 48 V technology and currents of up to 190 A, large cable cross-sections (e.g. 2x 50 mm² or 70 mm²) and high-quality DC fuses are absolutely essential.VentilationThe device is equipped with active fan cooling. Install the inverter in a cool, well-ventilated location and observe the specified minimum clearances.Phase balancingWhen operating on a 3-phase mains supply (e.g. Germany), a smart meter is required at the grid connection point to mathematically balance the consumption of all phases (balancing). Features ModelDeye SUN-8K-SG05LP1-EU-AM2-P Rated output power8.0 kW (8,000 watts) Phases1-phase (230V) Battery typeLow voltage (LV)** 48V Li-Ion / Lead Number of MPP trackers2 MPPT Max. charging/discharging current190 A Max. efficiency97,60 % Protection classIP65 (weatherproof) Special featureColour touchscreen & Smart Load FAQs for the Deye SUN-8K-SG05LP1-EU-AM2-PCan I operate a heat pump with this device?Yes, no problem. Thanks to the high output power of 8 kW and the Smart Load function, the inverter can be configured to prioritise supplying the heat pump with surplus solar energy.Is operation without a battery possible?Yes, the device also starts without storage. The inverter can be used as a pure PV inverter. A 48 V storage unit can be added later at any time via plug-and-play to increase self-consumption.Does the device support zero feed-in?Yes, via the supplied sensor. Using the CT clamp or a smart meter, the feed-in to the public grid can be limited to 0 watts (zero export). The manufacturer should be contacted regarding configuration. It is also necessary to discuss this with the grid operator. Scope of delivery: Deye SUN-8K-SG05LP1-EU-AM2-P (8 kW single-phase hybrid inverter) 1 x Deye SUN-8K-SG05LP1-EU-AM2-P inverterA high-performance single-phase hybrid inverter with 8 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x wall mount bracketA sturdy metal mounting rail for securely fixing the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the internet for remote monitoring via Deye Cloud or the Solarman app.1 x current transformer (CT - current transformer)An external clip-on current transformer for measuring energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of battery connection cables (DC cables)A pair of pre-assembled high-performance cables for the direct electrical connection of a 48V battery (specific to this "P" bundle version).1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (positive and negative) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for the professional installation of the wall bracket.1 x operating manual (user manual)A printed manual with detailed installation instructions, circuit diagrams and safety information.
The Deye SUN-10K-SG02LP1-EU-AM3-P is an extremely powerful, single-phase hybrid inverter of the latest generation, specially developed for demanding low-voltage photovoltaic systems. With a rated output power of 10 kW it is one of the most powerful single-phase devices on the market and enables significant optimisation of self-consumption as well as a seamless emergency power supply for large single-phase domestic networks or specific load groups.The abbreviation "P" stands for the support of High-current PV modules, which allows the connection of modern panels with high current ratings (up to 26 A per MPPT). It operates with 48 V low-voltage batteries combined and, thanks to its enormous charging and discharging capacity of up to 220 A, offers outstanding performance in the management of large battery storage systems.Highlights at a glanceEnormous 10 kW single-phase power: Ideal for large households or commercial applications with a single-phase system that require high load coverage.High-current inputs (26 A): Perfectly matched to the latest generation of PV modules with large cell formats and high short-circuit currents.48 V low-voltage system: Fully compatible with cost-effective and modularly expandable 48 V battery storage systems (e.g. LiFePO4 from Deye or Pylontech).220 A charging/discharging current: Enables extremely fast charging of the battery in strong sunlight and the powering of large loads from the battery.Full UPS functionality: Switches to stand-alone mode in less than 4 ms in the event of a power failure, ensuring that even sensitive electronics continue to operate without interruption.Three MPPT trackers: Offers maximum flexibility in roof coverage and optimises yield for different orientations or partial shading.AC-Coupling & Smart Load: Existing inverters can be easily integrated; furthermore, surplus energy can be specifically utilised for heat pumps or heating elements.Areas of applicationLarge single-phase domestic networksMaximum independence through the storage of large amounts of energy in cost-effective 48 V batteries.Off-grid & stand-alone solutionsThanks to its high output power of 10 kW, the unit is ideal for off-grid systems in remote areas.Retrofitting & expansionThanks to AC coupling, it can be installed in parallel with existing string inverters to retrofit a storage system.Installation & safety instructionsHigh battery currentsWith a discharge current of up to 220 A, it is essential to use heavy-duty cable cross-sections (e.g. 2x 50 mm² or 70 mm²) and appropriate high-current fuses.Thermal managementDespite the high efficiency, waste heat is generated at 10 kW output. Ensure the installation site has good air circulation and observe the minimum clearances.Phase coupling in the homeWhen installing in a German 3-phase mains supply, please observe the unbalanced load regulation (max. 4.6 kVA phase difference from the mains), unless a phase-balancing measurement or a zero-feed-in setup is used. Features ModelDeye SUN-10K-SG02LP1-EU-AM3-P Rated output power10 kW (10,000 watts) Phases1-phase*(230V) Battery typeLow voltage (LV) 48V Li-Ion / Lead Number of MPP trackers3 MPPT Max. PV input power13,000 watts*(13 kW) Max. charging/discharging current220 A Protection classIP65 (weatherproof) Special featureSupports Smart Load & AC-Coupling FAQs for the Deye SUN-10K-SG02LP1-EU-AM3-PCan I supply a 3-phase house with this single-phase unit?Yes, via netting. The inverter feeds into one phase. A smart meter installed at the grid connection point ensures that the consumption of the other two phases is mathematically balanced (netting), so that the electricity meter effectively remains stationary.How many batteries can I connect?Virtually unlimited. Thanks to the 48 V system, many battery modules can be connected in parallel. The inverter communicates via CAN or RS485 with the leading battery management system (BMS). Please compare the battery with the compatibility list; this is recommended.Is the device suitable for outdoor use?Yes, thanks to IP65. The housing is dustproof and protected against water jets. Nevertheless, a shaded installation location is recommended in order to extend the service life of the electronics through lower thermal stress.
The Deye SUN-12K-SG02LP1-EU is a high-performance hybrid inverter for modern photovoltaic systems. With up to 12 kW AC output, flexible battery connectivity and extensive protection functions, it provides a reliable solution for grid-tied and off-grid applications in both residential and commercial environments.Highlights at a glanceHigh performance: 12 kW AC output power for demanding energy systemsFlexible operation: Up to 16 units can be used in parallel – on-grid and off-gridVersatile storage integration: Supports lithium-ion and lead-acid batteriesSmart energy management: 6 freely definable time slots for charging and dischargingMaximum safety: Integrated protection against overload, short circuit, overvoltage and island operationEfficient energy use with hybrid technologyThe SUN-12K-SG02LP1-EU supports both DC and AC coupling, making it ideal for new installations and retrofits. Thanks to a maximum efficiency of 97.6% and an MPPT efficiency of 99.9%, it ensures optimal energy conversion.Flexibility through parallel connectionUp to 16 inverters can be operated in parallel, both in on-grid and off-grid operation. This allows realisation of projects of any size, from large private homes to larger commercial installations.Smart battery usageWith a maximum charge and discharge current of 190 A and adaptive communication with the BMS (RS485, CAN), the inverter supports both lithium-ion and lead-acid batteries. The battery can also be charged via a diesel generator, further extending its application range.Safety and protection functionsThe Deye SUN-12K-SG02LP1-EU is certified to international standards and offers comprehensive protections: overvoltage and short circuit protection, anti-islanding, residual current monitoring, and PV string monitoring. This makes it compliant with the highest safety standards for stable operation.Who is the Deye SUN-12K-SG02LP1-EU suitable for?This hybrid inverter is ideal for:Private households with a high share of self-consumptionCommercial operations requiring uninterruptible power supplyInstallations that require flexible expandability by parallel connectionOperators of PV systems wishing to use both grid-tied and off-grid operationFeatures ModelDeye SUN-12K-SG02LP1-EU Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60 Max. charge current (A)250 Max. discharge current (A)250 Charging strategy for Li-Ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)18000 Nominal PV input voltage (V)500 Starting voltage (V)125 MPP voltage range (V)150-425 PV input current (A)26+26+26 Max. PV short-circuit current (A)44+44+44 Number of MPPT3 Strings per MPPT2+2+2 AC output data AC rated power and UPS power (W)12000 Max. AC output power (W)13200 AC output rated current (A)52.2 Max. AC current (A)57.4 Max. continuous AC pass (A)80 Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Efficiency Max. efficiency97.60% Euro efficiency97.00% MPPT efficiency99.90% General data Operating temperature range (°C)-40~60°C, >45°C power derating Communication with BMSRS485; CAN Weight (kg)35.6 Size (mm)420B x 670H x 233T Degree of protectionIP65 Warranty10 years FAQs on the Deye SUN-12K-SG02LP1-EU hybrid inverterWhich battery types can be connected to the 12 kW inverter?The inverter is compatible with lithium-ion and lead-acid batteries and adapts its charging strategy automatically to the respective BMS.Can the single-phase inverter be used in parallel?Yes, up to 16 devices can be connected in parallel, both for grid-tied and off-grid systems.What protection functions are integrated?The device offers surge, short circuit, islanding and overcurrent protection as well as integrated monitoring for PV strings and residual currents.Is the inverter suitable for retrofitting?Yes, thanks to AC and DC coupling, the SUN-12K-SG02LP1-EU is suitable for both new installations and expanding existing PV systems.What warranty applies to the device?Deye provides a manufacturer’s warranty of 10 years. Scope of delivery: Deye SUN-12K-SG02LP1-EU 12 kW hybrid inverter single-phase 1 x Deye SUN-12K-SG02LP1-EU inverterA single-phase hybrid inverter with 12 kW output, integrated colour LCD touchscreen and support for 48V low voltage battery systems.1 x wall mount bracketA sturdy metal mounting rail for securely attaching the device to a solid wall.1 x Wi-Fi stick (data logger)A plug-in communication module for internet connection for remote monitoring via the Deye Cloud or Solarman app.1 x current transformer (CT - Current Transformer)An external split-core current transformer for measuring power flows at the grid connection point, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The necessary pairs of DC connectors (positive and negative) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter and the battery management system.1 x mounting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty expansion plugs for correct installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, circuit diagrams and safety information.
The Deye SUN-16K-SG01LP1-EU is a robust hybrid inverter, ideally suited for use in private households and small businesses. It impresses with an AC output of 15 kW and ensures efficient and reliable energy supply, thanks to flexible battery utilisation as well as comprehensive safety features. The unit is suitable for both grid-connected and off-grid operation.Highlights at a glanceHigh performance: 15 kW nominal power, 16 kW peak powerFlexible operation: On-grid and off-grid use possiblePowerful battery integration: Max. charge/discharge current 250 A, compatible with 48 V low-voltage batteriesEfficient energy conversion: Max. efficiency 97.6%, 2 MPPTs for optimal PV utilisationUser-friendly: Colour touchscreen, integrated WLAN, control via appScalable: Parallel operation of up to 16 devices for larger projectsEfficient energy managementThe SUN-16K-SG01LP1-EU optimises PV energy self-consumption by prioritising direct use of electricity and storing surplus energy in batteries or feeding it into the grid. The battery can also be charged via a diesel generator, making it the ideal backup solution or suitable for remote off-grid sites.Flexible storage and system integrationThe system is suitable for a range of battery manufacturers thanks to its compatibility with 48 V low-voltage batteries and communication interfaces (RS485, CAN). Six programmable time windows for charging and discharging allow for intelligent management, even in conjunction with variable electricity tariffs.Maximum safety and reliabilityThe inverter guarantees safe and reliable operation under all conditions via IP65 protection rating, integrated safety mechanisms (overvoltage, short-circuit and anti-islanding protection) as well as compliance with international standards.Who is the Deye SUN-16K-SG01LP1-EU suitable for?This hybrid inverter is ideal for:Private households with high energy demands and self-sufficiency requirementsSmall businesses with a need for continuous energy supplyOperators of off-grid systems with diesel generator integrationInstallations that should remain scalable through parallel operationProperties ModelDeye SUN-16K-SG01LP1-EU Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60 Max. charge current (A)290 Max. discharge current (A)290 Charging strategy for Li-ion batterySelf-adjustment to BMS PV string input data Max. DC input power (W)25600 Rated PV input voltage (V)500 Start voltage (V)125 MPP voltage range (V)150-425 PV input current (A)26+26+26 Max. PV short-circuit current (A)44+44+44 Number of MPPT3 Strings per MPPT2+2+2 AC output data AC nominal power and UPS power (W)16000 Max. AC output power (W)17600 AC output nominal current (A)69.6 Max. AC current (A)76.5 Max. continuous AC throughput (A)100 Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Efficiency Max. efficiency97.60% Euro efficiency97.00% MPPT efficiency99.90% General data Operating temperature range (°C)-40~60°C, >45°C power reduction Communication with BMSRS485; CAN Weight (kg)35.5 Size (mm)527W x 700H x 294D Degree of protectionIP65 Warranty10 years FAQs about the Deye SUN-16K-SG01LP1-EU Hybrid InverterWhich batteries is the 16 kW inverter compatible with?The inverter supports 48 V low-voltage batteries and is compatible with various manufacturers thanks to RS485 and CAN interfaces.Can the Deye inverter also be operated without a battery?Yes, the SUN-16K-SG01LP1-EU works both with and without battery storage.Is parallel operation possible?Up to 16 units can be operated in parallel, which allows for use in larger projects.How is the inverter system controlled?The control is conveniently done via a colour touchscreen directly on the device or via app using the integrated WLAN.What warranty does Deye offer?A manufacturer’s warranty of 10 years applies to the SUN-16K-SG01LP1-EU. Scope of delivery: Deye SUN-16K-SG01LP1-EU (16 kW 1-phase hybrid inverter) 1 x Deye SUN-16K-SG01LP1-EU inverterAn extremely powerful single-phase hybrid inverter with 16 kW output, integrated LCD colour touchscreen and support for 48 V low-voltage battery systems.1 x Wall Mount BracketA robust metal rail for secure attachment of the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A pluggable communication module for connecting to the internet for remote monitoring via Deye Cloud or Solarman app.1 x current transformer (CT - Current Transformer)An external clamp-on current transformer for measuring energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter and the battery management system.1 x installation kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall mount bracket.1 x User Manual (operating instructions)A printed manual with detailed installation instructions, circuit diagrams, and safety information.
The Deye SUN-3.6K-SG05LP1-EU-AM2 is a compact, single-phase hybrid inverter designed specifically for smaller photovoltaic systems in residential buildings. With an AC output power of 3.6 kW it offers the ideal introduction to energy independence by combining solar power generation, battery management and emergency power supply in a single device.As part of the SG05 series this inverter is designed for operation with 48V low-voltage batteries optimised. This makes the system particularly flexible and cost-effective when selecting the storage unit. Despite its compact design, it features all the ‘major’ Deye features, such as the Smart Load connection and parallel scalability.Highlights at a glanceLow-voltage battery connection: Compatible with standard 48V lithium-ion and lead-acid batteries, offering a wide range of cost-effective storage options.Colour touchscreen LCD: Intuitive operation and real-time monitoring of all energy flows directly on the device via the integrated display.2 MPPT trackers: Enables the connection of two independent string arrays, ideal for roofs with different orientations (e.g. east-west).Excellent backup function: Lightning-fast switchover to emergency power in less than 10 ms, ensuring that sensitive equipment continues to run without interruption in the event of a mains failure.AC coupling possible: Existing solar systems can be easily integrated via the inverter to retrofit them with a storage unit.Parallel connection: Up to 16 units can be connected in parallel to flexibly increase system performance as demand rises.Smart load connection: The "Smart Load" port enables the targeted control of loads such as heating elements or pool pumps when there is a surplus of solar energy.Areas of applicationThe SUN-3.6K is the specialist for efficient small-scale systems:Detached houses & flatsPerfect for PV systems up to approx. 4.6 kWp, to drastically increase self-consumption in the household.RetrofittingAdd a 48V battery storage system to an existing installation without having to replace the old inverter.Critical infrastructureProtection for servers, aquariums or heating controls thanks to the reliable UPS function.Installation & Safety InstructionsBattery protectionAs high currents can flow in 48V systems, it is essential to ensure that the cable cross-sections are sufficiently sized and that a suitable DC fuse is installed between the battery and the inverter.Wall mountingThe device is robustly built and designed for wall mounting. Thanks to its IP65 protection rating, it can also be installed in sheltered outdoor areas.Earthing & lightning protectionEnsure that the system is properly earthed to protect the electronics and connected loads from power surges.. Features ModelDeye SUN-3.6K-SG05LP1-EU-AM2 Rated output power3.6 kW (3,600 watts) Phases1-phase (230V) Battery typeLow voltage (LV) 48V Li-Ion / Lead Number of MPP trackers2 MPPT Max. charging/discharging current90 A Max. efficiency97,60 % Protection classIP65** (weatherproof) Special featureIncludes **connection cable set FAQs for the Deye SUN-3.6K-SG05LP1Which batteries are compatible with this inverter?Almost all 48V lithium storage systems.It is perfectly compatible with popular models such as Pylontech (US2000C/US3000C/US5000), Dyness or Deye’s own low-voltage batteries. Conventional lead-gel batteries can also be configured. It is essential to check the batteries against the compatibility list before purchasing.Can I use the inverter for a balcony power plant?Technically yes, but oversized.While it far exceeds the output of a balcony power plant, it offers the advantage that you can integrate a proper battery and later scale the system into a full roof-mounted installation.Is the Wi-Fi module for app control included?Usually, yes.Deye usually comes with a Wi-Fi dongle, which you can use to connect the system to the "Solarman" app or the Deye portal to view yields and consumption worldwide.Can the unit start a generator?Yes.Via the signal port, the inverter can send an automatic start command to compatible generators if the battery level is too low and there is no sunlight. Scope of delivery: Deye SUN-3.6K-SG05LP1-EU-AM2-P (3.6 kW single-phase hybrid inverter) 1 x Deye SUN-3.6K-SG05LP1-EU-AM2-P inverterA compact single-phase hybrid inverter with 3.6 kW output, an integrated colour LCD touchscreen and support for 48V low-voltage battery systems.1 x wall mount bracketA sturdy metal mounting rail for securely fixing the unit to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the internet for remote monitoring via the Deye Cloud or Solarman app.1 x current transformer (CT)An external folding current transformer for measuring energy flows at the property connection, necessary for net metering and optimising self-consumption.1 x set of battery connection cables (DC cables)A pair of pre-assembled high-performance cables (red and black) for direct electrical connection to a 48V battery (specific to this bundle version).1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (positive and negative) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter to the battery management system.1 x mounting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for the correct installation of the wall mount.1 x User ManualA printed manual containing detailed installation instructions, circuit diagrams and safety instructions.
