Deye SUN-16K-SG01LP1-EU Hybrid inverter 1-phase 16 kW

The Deye SUN-12K-SG02LP1-EU is a high-performance hybrid inverter for modern photovoltaic systems. With up to 12 kW AC output, flexible battery connectivity and extensive protection functions, it provides a reliable solution for grid-tied and off-grid applications in both residential and commercial environments.Highlights at a glanceHigh performance: 12 kW AC output power for demanding energy systemsFlexible operation: Up to 16 units can be used in parallel – on-grid and off-gridVersatile storage integration: Supports lithium-ion and lead-acid batteriesSmart energy management: 6 freely definable time slots for charging and dischargingMaximum safety: Integrated protection against overload, short circuit, overvoltage and island operationEfficient energy use with hybrid technologyThe SUN-12K-SG02LP1-EU supports both DC and AC coupling, making it ideal for new installations and retrofits. Thanks to a maximum efficiency of 97.6% and an MPPT efficiency of 99.9%, it ensures optimal energy conversion.Flexibility through parallel connectionUp to 16 inverters can be operated in parallel, both in on-grid and off-grid operation. This allows realisation of projects of any size, from large private homes to larger commercial installations.Smart battery usageWith a maximum charge and discharge current of 190 A and adaptive communication with the BMS (RS485, CAN), the inverter supports both lithium-ion and lead-acid batteries. The battery can also be charged via a diesel generator, further extending its application range.Safety and protection functionsThe Deye SUN-12K-SG02LP1-EU is certified to international standards and offers comprehensive protections: overvoltage and short circuit protection, anti-islanding, residual current monitoring, and PV string monitoring. This makes it compliant with the highest safety standards for stable operation.Who is the Deye SUN-12K-SG02LP1-EU suitable for?This hybrid inverter is ideal for:Private households with a high share of self-consumptionCommercial operations requiring uninterruptible power supplyInstallations that require flexible expandability by parallel connectionOperators of PV systems wishing to use both grid-tied and off-grid operationFeatures  ModelDeye SUN-12K-SG02LP1-EU Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60 Max. charge current (A)250 Max. discharge current (A)250 Charging strategy for Li-Ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)18000 Nominal PV input voltage (V)500 Starting voltage (V)125 MPP voltage range (V)150-425 PV input current (A)26+26+26 Max. PV short-circuit current (A)44+44+44 Number of MPPT3 Strings per MPPT2+2+2 AC output data AC rated power and UPS power (W)12000 Max. AC output power (W)13200 AC output rated current (A)52.2 Max. AC current (A)57.4 Max. continuous AC pass (A)80 Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Efficiency Max. efficiency97.60% Euro efficiency97.00% MPPT efficiency99.90% General data Operating temperature range (°C)-40~60°C, >45°C power derating Communication with BMSRS485; CAN Weight (kg)35.6 Size (mm)420B x 670H x 233T Degree of protectionIP65 Warranty10 years  FAQs on the Deye SUN-12K-SG02LP1-EU hybrid inverterWhich battery types can be connected to the 12 kW inverter?The inverter is compatible with lithium-ion and lead-acid batteries and adapts its charging strategy automatically to the respective BMS.Can the single-phase inverter be used in parallel?Yes, up to 16 devices can be connected in parallel, both for grid-tied and off-grid systems.What protection functions are integrated?The device offers surge, short circuit, islanding and overcurrent protection as well as integrated monitoring for PV strings and residual currents.Is the inverter suitable for retrofitting?Yes, thanks to AC and DC coupling, the SUN-12K-SG02LP1-EU is suitable for both new installations and expanding existing PV systems.What warranty applies to the device?Deye provides a manufacturer’s warranty of 10 years. Scope of delivery: Deye SUN-12K-SG02LP1-EU 12 kW hybrid inverter single-phase 1 x Deye SUN-12K-SG02LP1-EU inverterA single-phase hybrid inverter with 12 kW output, integrated colour LCD touchscreen and support for 48V low voltage battery systems.1 x wall mount bracketA sturdy metal mounting rail for securely attaching the device to a solid wall.1 x Wi-Fi stick (data logger)A plug-in communication module for internet connection for remote monitoring via the Deye Cloud or Solarman app.1 x current transformer (CT - Current Transformer)An external split-core current transformer for measuring power flows at the grid connection point, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The necessary pairs of DC connectors (positive and negative) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter and the battery management system.1 x mounting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty expansion plugs for correct installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, circuit diagrams and safety information.

The Deye Smart Transmitter SUN-SMART-TX01 is a LoRa wireless module that acts as a central communication interface between Deye hybrid inverters and smart devices – such as the SUN-SMART-CT01 smart meter. It transmits data wirelessly and enables the intelligent control of energy-consuming devices such as smart plugs, switches or EV charging stations. This makes the module ideal for residential and commercial applications where energy flows need to be managed locally, efficiently and without additional reliance on the cloud.Function and intended useThe Deye Smart Transmitter SUN-SMART-TX01 is the central communication module in the Deye Wireless Energy Management System. It connects the hybrid inverter to all smart Deye devices via the LoRa wireless protocol. This allows you to control your energy flows locally, prioritise loads and optimise the self-consumption of solar power. Typical applications include residential properties, small commercial premises or off-grid systems where energy efficiency and independence are key priorities.Data transmission and integrationData is transmitted via the LoRa wireless network in the 863 to 870 MHz frequency range. The transmitter communicates bidirectionally with the inverter and connected devices over a range of up to 200 m. Communication takes place entirely locally, without the need for the internet or the cloud. The system responds with virtually no delay and allows direct control via the Deye Cloud app or the inverter display. For example, you can adjust charging times for electric vehicles or automatically activate appliances when there is a PV surplus.Compatibility and installationThe SUN-SMART-TX01 is compatible with all Deye hybrid inverters. It connects via the meter port and mounts on a DIN rail. Once installed, it pairs automatically with the LoRa devices. Set-up is plug-and-play and requires no additional cabling. Thanks to its IP65 protection rating when installed, the module is suitable for both indoor and sheltered outdoor locations. It is powered by 5 V DC and has minimal energy consumption.System benefits at a glanceDeye ’s Wireless Energy Management System with the SUN-SMART-TX01 offers you a flexible and scalable solution for smart energy management. You can integrate smart plugs, switches, power sensors and EV charging stations into the system. Local automation logic allows devices to be controlled based on time, battery level or PV yield. This enables you to make the most of your solar power, reduce grid consumption and increase self-sufficiency.Technical details Model nameSUN-SMART-TX01 Input voltageDC 5 V Method of communicationLoRa Frequency range863–870 MHz Communication rangeup to 200 m (open terrain) Antenna gain0.56 dBi (integrated) Operating temperature-40 to +60 °C Humidity0–100 % Protection ratingIP20 (IP65 when installed) Permitted heightup to 4000 m Dimensions (W x H x D)137.8 x 31.3 x 31.3 mm Weight0.046 kg Warranty2 years CertificationIEC/EN 62368-1 ManufacturerDeye Inverter Technology Co., Ltd. Deye SUN-SMART-TX01 package contents1x Deye Smart Transmitter SUN-SMART-TX01 with:1x LoRa wireless module1x user manual

The Deye SUN-15K-SG05LP3-EU-SM2 is a high-performance three-phase hybrid inverter developed for demanding photovoltaic systems in both commercial and private sectors. With a charging and discharging capacity of up to 350 A, support for various battery types and versatile application options, it is a reliable solution for modern energy systems.Highlights at a glanceHigh performance: 15 kW rated power for medium to large PV systemsFlexible battery application: Compatible with 48 V lithium-ion and lead-acid batteriesPowerful charge and discharge current: Up to 280A for rapid energy storageParallel operation: Operation of up to 10 devices possible, on-grid and off-gridDiesel generator compatible: Support for external power sourcesEfficient energy conversion for modern requirementsThe Deye SUN-15K-SG05LP3-EU-SM2 enables a high self-consumption rate through intelligent battery management, flexible PV feed-in and versatile communication interfaces. With a maximum efficiency of 97.6 percent and MPPT efficiency of over 99 percent, the system operates extremely efficiently and is energy-optimised.Flexible integration and retrofittingWhether as part of a new photovoltaic system or to expand existing systems, thanks to AC coupling and parallel operation, the SUN-15K is highly versatile. The combination with up to 10 inverters and various battery types allows scalable storage solutions and maximum system availability.Intelligent grid and island operationThe inverter supports operation on the public grid as well as self-sufficient island operation. Integrated communication via RS485, CAN, Wi-Fi, GPRS or LAN (optional) allows for easy integration into monitoring and control systems. The protection functions and IP65 protection class guarantee maximum operational safety.Who is the Deye SUN-15K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for:PV systems in commercial or private sectors with moderate energy demandSystems operated in parallel with the grid or independentlyProjects requiring maximum flexibility and reliabilityExisting systems to be modernised via AC coupling  ModelSUN-15K-SG05LP3-EU-SM2 Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60V Max. charging current (A)280A Max. discharging current (A)280A Charging strategy for Li-ion batterySelf-adaptation to BMS Number of battery inputs2 PV string input data Max. DC input power (W)22500W Max. DC input voltage (V)800V Starting voltage (V)160V MPPT voltage range (V)160V-650V Nominal DC input voltage (V)550V Max. operational PV input current (A)36+36A Max. input short-circuit current (A)54+54A Number of MPP trackers/number of strings per MPP tracker2/2+2 AC input/output side Rated AC input/output active power15000 Max. AC input/output apparent power16500 AC input/output rated current (A)22.8/21.8 Max. AC input/output current (A)25/24 Max. continuous AC passthrough (Grid for charging)70 Peak performance (off-grid)2x rated output power, 10s Power factor adjustment range0.8 leading to 0.8 lagging Rated input/output voltage/range (V)220/380V, 230/400V 0.85Un-1.1Un Rated input/output grid frequency/range(Hz)50/45-55, 60/55-65 Form of grid connection3L+N+PE Total harmonic current distortion (THDi)<3% ( rated power ) DC current feed-in<0,5% In Efficiency Max. efficiency97,6% Euro efficiency97,0% MPPT efficiency>99% Device protection IntegratedDC reverse polarity protection, AC output overcurrent protection, AC output overvoltage protection, AC output short-circuit protection, thermal protection, DC terminal insulation resistance monitoring, DC component monitoring, ground fault current monitoring, grid monitoring, islanding protection, ground fault detection, overvoltage load shedding protection, residual current monitoring (RCD), overvoltage category Surge protection levelTYPE II(DC), TYPE II(AC) Interface Communication interfaceRS485/RS232/CAN Monitor modeGPRS/WIFI/Bluetooth/4G/LAN (optional) General data Operating temperature range (℃)-40 to +60°C, >45°C power reduction Permissible ambient humidity0-100% Permissible altitude3000m Noise (dB)<60 dB(A) Protection classIP 65 Inverter topologyNon-isolated Overvoltage categoryOVC II(DC), OVC III(AC) Dimensions (WxHxD mm)456×750×268.5 (Without connectors and brackets) Weight (kg)50.6 Cooling methodIntelligent cooling Warranty5-year/10-year warranty period depends on the installation conditions of the inverter. For details, please refer to the general terms and conditions of warranty Grid regulationIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2  FAQs about the Deye SUN-15K-SG05LP3-EU-SM2Which battery systems are compatible?It supports low voltage batteries with a voltage of 40–60 V, both lithium-ion and lead-acid. Communication takes place intelligently via BMS protocols. The maximum charging and discharging current is up to 280 A.How efficient is this inverter?The maximum efficiency is 97.6%, the EU efficiency is 97.0%, which means very low losses.How many MPPTs and strings does it support?It has two MPP trackers, each of which can be connected to up to two PV strings (2 strings per MPPT).Can I operate several devices in parallel?Yes, up to 10 devices can be operated in parallel in on-grid or off-grid mode to flexibly scale system performance and capacity.What protection features are integrated?It is protected to IP65 and therefore protected against dust and water jets. In addition, it features comprehensive protection functions against DC reverse polarity, overcurrent, overvoltage, short circuit, earth faults and arc faults (“AFCI”). Scope of delivery: Deye SUN-15K-SG05LP3-EU-SM2 Three-phase Hybrid Inverter 15 kW 1 x Deye SUN-15K-SG05LP3-EU-SM2 inverterThe three-phase hybrid inverter with 15 kW output, integrated LCD colour touchscreen and support for 48V batteries.1 x wall mount bracketA robust metal rail for secure mounting of the device to a wall of sufficient load-bearing capacity.1 x Wi-Fi stick (data logger)A plug-in module for integrating the inverter into the local Wi-Fi network for monitoring via Deye Cloud or Solarman App.3 x current transformers (CT - Current Transformer)Split-core current transformers for measuring the energy flows at the house connection, necessary for functions such as zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The corresponding pairs of connectors (plus and minus) for connecting the photovoltaic strings to the DC inputs.1 x communication cable (BMS)A pre-assembled RJ45 cable for data connection between the inverter and the battery management system of the storage unit.1 x mounting kitIncludes the necessary stainless steel screws and heavy-duty dowels for the correct installation of the wall bracket.1 x User ManualA printed manual with technical specifications, wiring diagrams, installation instructions and safety advice.

The Deye SUN-12K-SG05LP3-EU-SM2 is a three-phase hybrid inverter for residential and commercial energy projects. It combines an inverter, battery charger and energy management system in one device, enabling efficient, flexible energy flow control in new installations and retrofits.Highlights at a glanceSupports both lead-acid and lithium-ion batteries for various storage optionsBattery voltage range from 40 to 60 volts for flexible application possibilitiesMaximum charging and discharging current of 240 amperes for fast energy absorption and releaseMaximum PV input power of 18,000 watts enables high-performance solar systemsTwo independent MPPT inputs for maximum energy yield even with different module orientationsUnbalanced output power with up to 50 percent of the rated power per phase for flexible load distributionEfficient energy conversion for modern requirementsThe Deye SUN-12K-SG05LP3-EU-SM2 achieves a maximum efficiency of 97.6 percent and boasts an MPPT efficiency of over 99 percent. The wide MPPT voltage range of 200 to 650 volts, in conjunction with a maximum PV input voltage of 800 volts, ensures efficient energy capture even under varying irradiation conditions. This high efficiency ensures economical operation and maximum yields from the solar system.Flexibility and scalabilityThe Deye SUN-12K-SG05LP3-EU-SM2 can be flexibly adapted to different requirements. Thanks to the ability to operate up to ten devices in parallel, it is suitable for both smaller systems and large energy projects. The AC coupling allows easy integration into existing systems, making the inverter also ideal for retrofitting. Support for various battery types enables tailor-made storage solutions matched to individual needs and budgets.Reliability and protectionWith an IP65 protection rating, the inverter is optimally protected against dust and water, and is suitable for demanding environmental conditions. The wide operating temperature range from minus 40 to plus 60 degrees Celsius ensures safe operation even under extreme climatic conditions. Comprehensive protection mechanisms such as overcurrent, overvoltage, short-circuit and thermal protection, as well as DC insulation impedance monitoring, provide maximum operational safety and a long system lifespan.Who is the Deye SUN-12K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forHomeowners who want to increase their self-consumption quota and reduce energy costsCommercial enterprises that require a stable and efficient power supplyUsers who want to expand existing solar systems with modern storage solutionsProjects in regions with fluctuating grid stability, where diesel generators are used as an additional energy source  ModelDEYE SUN 12K-SG05LP3-EU-SM2 Battery input data Battery typeLi-lon Battery voltage range (V)40~60 Max. charging current (A)240 Max. discharging current (A)240 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adjustment to BMS PV string input data Max. DC input power (W)18000 Nominal PV input voltage (V)550 Start voltage (V)160 MPP voltage range (V)200-650 Max. DC input voltage (V)800 PV input current (A)26+26 Max. PV short-circuit current (A)39+39 Number of MPPT2 Strings per MPPT2+2 AC output data AC rated power and UPS power (W)12000 Max. AC output power (W)13200 AC rated output current (A)18.2/17.4 Max. rated AC output current (A)20/19.2 Max. continuous AC running (A)45 Peak power (without grid)2 times rated power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) DC feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection SafeguardsDC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, Thermal Protection, AC OutputSurge Protection, AC Output Short Circuit Protection, DC Component Monitoring, Overvoltage Load Protection,Earth Fault Current Monitoring, Arc Fault Circuit Interrupter (optional), Grid Monitoring,Island Protection Monitoring, Earth Fault Detection, DC Input Switch, DC IsolationImpedance Monitoring, Residual Current Detection (RCD), Surge Protection Level Surge categoryDC Type II/AC Type III Certifications and standards Grid approvalsIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G98, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN; RS232 Weight (kg)35,2 Size (mm)386B×660H×250 D Protection classIP65 Installation styleWall bracket Warranty10 years  FAQs on the 10 kW Deye Hybrid InverterWhat types of batteries does the inverter support?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range of 40 to 60 volts.What is the maximum charging and discharging current?The maximum charging and discharging current is 240 amperes, which enables fast energy transfer.Can the inverter be operated with a diesel generator?Yes, the Deye SUN-12K-SG05LP3-EU-SM2 supports the integration of diesel generators for a safe and uninterrupted power supply.Which communication interfaces are available?The inverter offers interfaces such as RS485, RS232, CAN as well as options for GPRS, Wi-Fi, Bluetooth, 4G and LAN for monitoring and control.Can the inverter supply unbalanced loads?Yes, the inverter can supply an unbalanced load of up to 100 percent, with each phase being able to deliver up to 50 percent of the rated power. Scope of delivery: Deye SUN-12K-SG05LP3-EU-SM2 three-phase hybrid inverter 12KW 1 x Deye SUN-12K-SG04LP3-EU-SM2 inverterA three-phase hybrid inverter with 12 kW output, integrated LCD touchscreen and support for 48V low-voltage battery systems.1 x wall mount bracketA robust metal mounting rail for securely attaching the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A pluggable communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman App.3 x current transformers (CT - Current Transformer)External clamp current transformers for measuring energy flows at the house connection, necessary for zero feed-in and optimising self-consumption.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) to connect the PV strings to the inverter.1 x communication cable (BMS)A pre-tethered RJ45 data cable for connecting between the inverter and battery management system.1 x mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for correct installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Eastron SDM630-M is a modern and multifunctional digital energy meter for three-phase networks, designed for comprehensive monitoring and analysis of electrical parameters. Thanks to its integrated Modbus RTU interface, it can be seamlessly integrated into building automation, energy management or photovoltaic monitoring systems. As a direct-measuring meter up to 100 amps per phase, it offers precise data acquisition for a wide range of applications in commercial, industrial and demanding private households.Highlights at a glancePrecise measurement: Reliably measures a wide range of electrical quantities (kWh, kvarh, kW, kvar, kVA, P, F, PF, Hz, dmd, V, A, THD).Modbus RTU interface: Enables simple remote reading and integration into higher-level systems via RS485.Multifunctional: Suitable for energy monitoring, cost centre billing, load management and PV system monitoring.Direct measuring up to 100A: No external current transformers required for currents up to 100A per phase, simplifies installation.Compact DIN rail format: Simple and space-saving installation in standard electrical distribution boards (4 modules wide).Comprehensive energy monitoring for professional applicationsThe Eastron SDM630-M is the ideal instrument for detailed recording of energy consumption and generation. It enables the precise monitoring of total consumption, individual machines or circuits as well as the recording of energy generated by a photovoltaic system. Thanks to the measurement of active and reactive energy in both directions (import/export), it is perfectly suited for monitoring PV systems with self-consumption. Its data forms the basis for energy efficiency measures, internal cost allocations or the monitoring of load profiles.Precise measurement and flexible integrationIn addition to active energy (kWh), this energy meter also measures reactive energy (kvarh), active power (kW), reactive power (kvar), apparent power (kVA), current (A), voltage (V), frequency (Hz), power factor (PF) and total harmonic distortion (THD) for voltage and current. The integrated Modbus RTU interface via RS485 enables all these values to be queried by systems such as data loggers, PLC controllers or energy management software. Direct measurement up to 100A eliminates the need for complex installation and configuration of external current transformers in many standard applications.Simple installation and operationThe SDM630-M is quick and easy to install on a standard DIN rail in electrical distribution boards. The large, illuminated LCD display enables the most important measured values to be read directly on site. The buttons on the front can be used to navigate intuitively through the various display menus in order to view all the recorded parameters or make basic settings. Features  ModelEastron SDM630-M Modbus ApplicationThree-phase energy meter MeasurementActive/reactive energy (kWh/kvarh),Voltage (V), current (A), power (W/VA/var),Power factor, frequency (Hz) Power supply types3-phase (3p4w, 3p3w), 1-phase (1p2w) Rated voltage (V)3x230/400 V AC Rated current (A)10(100) A (direct measurement) Accuracy classCl. 1 (active energy) / Cl. B (MID) InterfaceModbus RTU (RS485) MountingDIN rail (DIN rail) Dimensions (W x H x D in mm)72 x 100 x 66 (4 modules) Weight (g)approx. 300  FAQs about the Eastron SDM630-M energy meterWhat is the difference between the SDM630-M and other SDM630 variants?The "M" in the designation stands for the integrated Modbus RTU interface. There are also variants with pulse outputs (e.g. SDM630-V1/-V2), with M-Bus interface or as MID-calibrated versions for billing purposes (SDM630-Modbus-MID).Do I need external current transformers for this meter?No, this model is designed for Direct measurement of currents up to 100 amperes per phase. No external current transformers (CTs) are required as long as this current range is not exceeded. Special CT meters (e.g. SDM630MCT) are available for higher currents.Is this meter suitable for official billing (e.g. with the energy supplier)?No, this standard model is usually not MID-calibrated and must therefore not be used for billing to the nearest kilowatt hour. It is primarily intended for monitoring purposes and internal cost allocation. For billing purposes, you need a variant with MID approval (e.g. SDM630-Modbus-MID).How is the data read out via Modbus?To read out the data, you need a Modbus master (e.g. a data logger, a PLC, a Raspberry Pi or a PC with appropriate software and an RS485 interface). The master sends queries to the address of the meter in the RS485 network and reads the values from the defined Modbus registers. The register assignment can be found in the manual for the meter.

The Deye SE-F16 is a high-capacity low-voltage energy storage system (51.2 V) designed for demanding use in residential and commercial photovoltaic systems. With an enormous rated capacity of 16 kWh (314 Ah) in just one compact housing module, this storage system significantly minimises the space required and the installation effort.This model uses the proven and intrinsically safe lithium iron phosphate (LiFePO4) cell chemistry. Combined with the intelligent Battery Management System (BMS) and a wide range of monitoring options (including Bluetooth), the SE-F16 offers maximum safety, scalability and longevity for the self-sufficient energy supply of your home or business.Highlights at a glanceMassive storage capacity (16 kWh): With a rated capacity of 314 Ah at 51.2 V, this single module provides enough energy to reliably supply large households even during prolonged periods of low sunlight.Safe LiFePO4 cell chemistry: The lithium iron phosphate technology guarantees maximum thermal stability and virtually eliminates the risk of thermal runaway (fire hazard).Powerful power handling: The system supports an enormous continuous discharge current of up to 230 A and peak currents of 280 A (for 10 seconds), ideal for power-hungry large loads such as heat pumps or wallboxes.Extreme scalability: For even greater energy requirements, up to 32 units can be connected in parallel as standard. With a CAN bridge, scaling up to 64 modules is even possible.Smart monitoring & connectivity: In addition to CAN2.0 and RS485, the storage system features Bluetooth for convenient monitoring via smartphone app. The "C" version (SE-F16-C) also has an integrated LCD display.Longevity & efficiency: Certified for over 6,000 charge cycles (at 25°C), ensuring decades of reliable operating life in daily use.Flexible installation: Despite the high weight, the housing system is extremely flexible and can be installed either on the wall, floor-standing or stacked.ApplicationsThe Deye SE-F16 is the perfect solution for demanding energy scenarios:Single-family and multi-family houses: Maximises self-consumption of PV power and, in combination with a hybrid inverter, provides a powerful emergency power supply for the entire building.Commercial applications (C&I): Used to cap expensive peak loads (peak shaving) and stores large PV surpluses in agricultural or commercial businesses.Off-grid & stand-alone systems: Thanks to its gigantic capacity and high continuous discharge power, it offers a reliable energy source for completely off-grid properties.Installation & safety instructionsLogistics and weight: At a weight of 109 kg, the module is extremely heavy. Installation should обязательно be carried out with suitable lifting equipment (stair climber) or by at least two to three people.Choice of location: The storage system must be installed in a dry and ideally frost-free room (protection class IP21). Charging at temperatures below 0°C is automatically blocked by the BMS to protect the cells.Cable cross-sections: Due to the extremely high currents (up to 230 A continuous load), the connection cables to the inverter or busbar must have a cross-section of at least 70 mm², preferably 95 mm², in order to avoid overheating and voltage losses.Commissioning with parallel connection: If you connect several SE-F16 modules together, all units must be charged to exactly the same voltage level before cabling in order to prevent dangerous equalisation currents. Features  ModelDeye SE-F16 (C series with display) Technology**LiFePO4** (lithium iron phosphate) Rated voltage**51.2 V** (operating range: 44.8 V - 57.6 V) Rated capacity**314 Ah** Nominal energy**16.0 kWh** Max. continuous current**230 A** (peak current 280 A for 10s) Cycle life**≥ 6000 cycles** (at 90% DOD and 25°C) CommunicationCAN 2.0 / RS485 / Bluetooth + app (incl. LCD display) Dimensions (W x D x H)approx. 400 x 233 x 708 mm Weightapprox. **109 kg** Mounting typeFloor mounting, wall mounting or stacked  H2: FAQs about the Deye SE-F16What is the difference between the SE-F16 and the SE-F12?The main difference lies in the capacity and the housing height. The SE-F16 delivers 16 kWh (314 Ah) and weighs around 109 kg, while the SE-F12 11.8 kWh (230 Ah) offers and weighs approx. 84 kg. Both use the same 51.2V architecture and are designed for identical applications, but the F16 offers significantly more autonomy per installed module.What does the "C" in the designation SE-F16-C mean?The suffix "-C" in Deye storage systems indicates the extended model variant which, in addition to Bluetooth monitoring, is also equipped with an integrated LCD display on the front of the housing. This allows the current state of charge (SoC), cell voltages and warning messages to be read directly on the device without having to open the app.Do I absolutely need a Deye inverter for this battery?No, but it is strongly recommended for smooth operation. The SE-F16 is "Plug & Play" compatible with Deye low-voltage hybrid inverters (such as the SG04 series), since the BMS protocol matches natively. With third-party brands (such as Victron, SMA or Solis), communication must first be configured manually via DIP switches or software settings. It is strongly recommended to check the compatibility list, as changes may occur on the manufacturer side.