Deye SUN-10K-SG02LP1-EU-AM3-P Single-phase hybrid inverter 10 kW
The following products might interest you:
€1,630.30
Prices incl. 19 % VAT, free delivery
Product information
The Deye SUN-10K-SG02LP1-EU-AM3-P is an extremely powerful, single-phase hybrid inverter of the latest generation, specially developed for demanding low-voltage photovoltaic systems. With a rated output power of 10 kW it is one of the most powerful single-phase units on the market and enables significant optimisation of self-consumption as well as a seamless emergency power supply for large single-phase domestic networks or specific load groups.
The abbreviation "P" stands for the support of High-current PV modules, which allows the connection of modern panels with high current ratings (up to 26 A per MPPT). It operates with 48 V low-voltage batteries combined, and, thanks to its enormous charging and discharging capacity of up to 220 A, offers outstanding performance in the management of large battery storage systems.
Highlights at a glance
- An impressive 10 kW single-phase power output: Ideal for large households or commercial applications with a single-phase system that require high load coverage.
- High-current inputs (26 A): Perfectly matched to the latest generation of PV modules with large cell formats and high short-circuit currents.
- 48 V low-voltage system: Fully compatible with cost-effective and modularly expandable 48 V battery storage systems (e.g. LiFePO4 from Deye or Pylontech).
- 220 A charging/discharging current: Enables extremely rapid charging of the battery in strong sunlight and the powering of high-power loads from the battery.
- Full UPS functionality: Switches to stand-alone mode in less than 4 ms in the event of a mains power failure, ensuring that even sensitive electronic equipment continues to operate without interruption.
- Three MPPT trackers: Offers maximum flexibility in roof coverage and optimises yield for different orientations or partial shading.
- AC Coupling & Smart Load: Existing inverters can be easily integrated; furthermore, surplus energy can be specifically utilised for heat pumps or heating elements.
Areas of application
- Large single-phase domestic networks
- Maximum independence through the storage of large amounts of energy in cost-effective 48 V batteries.
- Off-grid & stand-alone solutions
- Thanks to its high output power of 10 kW, the unit is ideal for off-grid systems in remote areas.
- Retrofitting & Expansion
- Thanks to AC coupling, it can be installed in parallel with existing string inverters to retrofit a storage system.
Installation & Safety Instructions
- High battery currents
- For a discharge current of up to 220 A, it is essential to use cables with a large cross-sectional area (e.g. 2 × 50 mm² or 70 mm²) and appropriate high-current fuses.
- Thermal management
- Despite its high efficiency, waste heat is generated at a power output of 10 kW. Ensure the installation site has good air circulation and observe the minimum clearances.
- Phase coupling in the home
- When installing in a German three-phase mains supply, please observe the unbalanced load regulation (max. 4.6 kVA phase difference from the mains), unless a phase-balancing measurement or a neutral-feed setup is used.
FAQs on the Deye SUN-10K-SG02LP1-EU-AM3-P
Can I power a three-phase house with this single-phase unit?
Yes, by soldering. The inverter feeds into one phase. A smart meter installed at the grid connection point ensures that the consumption on the other two phases is mathematically offset (net metering), so that the electricity meter effectively remains at zero.
How many batteries can I connect?
Virtually unlimited. Thanks to the 48 V system, many battery modules can be connected in parallel. The inverter communicates with the lead battery management system (BMS) via CAN or RS485. Please check the battery against the compatibility list; this is recommended.
Is the device suitable for outdoor use?
Yes, thanks to IP65. The housing is dust-tight and protected against water jets. Nevertheless, it is recommended to install it in the shade to extend the service life of the electronics by reducing thermal stress.
| AC output rated current: | 43.5 A |
|---|---|
| Battery technology (link): | Li-ion / LiFePo4 |
| Battery voltage range: | 40–60 V |
| Communication: | WIFI / RS485 / CAN |
| Dimensions (W x D x H): | 420 x 233 x 670 mm |
| Grid approvals: | IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Guideline R25, G98, G99, VDE-AR-N 4105 |
| MPPT efficiency: | > 99 % |
| MPPT voltage range: | 150–425 V |
| MPP trackers / strings per tracker: | 3 / 2+2+2 |
| Max. AC apparent power: | 11 kVA |
| Max. AC output current: | 47.9 A |
| Max. DC input power: | 16,000 W |
| Max. DC input voltage: | 500 V |
| Max. PV input current: | 32 + 32 + 32 A |
| Max. charge/discharge current: | 220 A / 220 A |
| Max. efficiency: | 97.60 % |
| Max. short-circuit current: | 60 + 60 + 60 A |
| Nominal DC voltage: | 370 V |
| Number of battery inputs: | 1 |
| Operating temperature: | –40 to +60 °C |
| Overvoltage category: | OVC II (DC) / OVC III (AC) |
| Protection class: | IP65 |
| Rated AC active power: | 10,000 W |
| Safety / EMC / Standards: | IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 |
| Starting voltage: | 125 V |
| Surge protection: | TYPE II (DC) / TYPE II (AC) |
| Type: | Single-phase hybrid inverter (low voltage) |
| Warranty: | 5 years |
| Weight: | approx. 35.6 kg |
Login
Customers also bought
The DEYE AI-W5.1-B in the 15 kWh version is a high-performance, pluggable and scalable energy storage system for demanding applications in both private and commercial settings. It stands out thanks to its high storage capacity, efficient charging and discharging performance, as well as its easy integration into existing PV systems.Highlights at a glanceHigh storage capacity: 15.36 kWh for large energy requirementsHigh-performance charging/discharging current: Up to 250 A for rapid energy supplyLow-voltage system: 51.2 V for increased safety and compatibilityEasy installation: Pluggable system for quick integrationScalability: Expandable for growing energy requirementsRobust design: Long service life and reliability – ideal for demanding applicationsEfficient energy storage for modern systemsThe DEYE AI-W5.1-B is specifically designed to reliably store large amounts of energy. The capacity of over 15 kWh in combination with a high charging/discharging current of 250 A makes it an ideal solution for the efficient use of solar power, even with higher load requirements.Flexible integration & modular expansionThanks to the pluggable design, the storage system can be integrated particularly easily into new or existing photovoltaic installations. The modular architecture enables a scalable storage solution that grows with energy requirements, whether in a private home, apartment building or commercial operation.Robust technology for reliable operationThe high-quality housing and solid construction ensure safe use, even under demanding conditions. With its modern battery management system, the storage unit offers maximum safety, durability and a stable energy supply.Who is the DEYE AI-W5.1-B 15 kWh battery storage system suitable for?This energy storage system is ideal for:Homeowners who want to increase their self-sufficiency and reduce electricity costs Commercial operations that want to absorb peak loads or integrate backup power solutions Installers who rely on simple, modular systems PV projects where future-proof and expandable storage systems are requiredFAQs on the DEYE AI-W5.1-B energy storage systemHow far can I expand the system later?Up to six modules can be combined per tower, resulting in a storage capacity of 30.7 kWh. By connecting up to six towers in parallel, expansion to a maximum total capacity of 184 kWh is possible without additional control technology.Which hybrid inverters is the 15 kWh package compatible with?The storage package is officially approved for three-phase Deye hybrid inverters of the low-voltage series.. The systems are fully matched to one another, and plug-&-play operation is possible directly, without manual configuration. Please check the compatibility list beforehand. Deye storage systems are only compatible with Deye inverters.Do I need active cooling?No, the system operates completely fanless with passive convection. The only important thing is a location with free air circulation, as recommended in the manual. Additional air conditioning is not required.Does the battery have to be fully charged before initial commissioning?Yes, the initial charge to 100 % is necessary to ensure correct SoC detection (State of Charge). If this step is omitted, deviations in capacity displays and charging behaviour may occur. For this reason, always fully charge the storage system first before you begin discharging it.How loud is the battery during operation?The battery operates completely without active fans and is therefore practically noiseless. Only when switching do relays switch briefly, which can be heard for a short time. In regular operation, the system remains silent. Scope of delivery DEYE AI-W5.1-B Modular Battery System (15.36 kWh): System compositionThis product is a set and consists of four separate main components that together form a 15.36 kWh tower system.Component 1: DEYE AI-W5.1-B-BMS (control unit & base)The central control unit (BMS Cluster) that manages the entire system. This unit forms the base of the battery tower.Components 2, 3 & 4: Three DEYE AI-W5.1-BATT battery modules (5.12 kWh each)Three pure battery modules with 5.12 kWh each, which are stacked onto the BMS unit and onto one another.1 x set of battery connection cables (plus & minus)A pair of high-performance cables for connecting the BMS unit to an external hybrid inverter.1 x communication cable (CAN/RS485)A data cable for communication between the BMS and the inverter.2 x connecting bridge / parallel connection cableShort, robust cables or fixed bridges to connect the three battery modules to one another.1 x earthing cableA protective conductor cable for proper earthing of the BMS unit.1 x mounting accessories (tower assembly)Includes screws or locks to securely connect the four components into a tower.1 x operating and installation instructionsA printed manual that describes the installation of the entire tower system.
The Deye SE-F16 is a high-capacity low-voltage energy storage system (51.2 V) designed for demanding applications in domestic and commercial photovoltaic systems. With an enormous rated capacity of 16 kWh (314 Ah) in a single compact housing module, this storage unit significantly minimises space requirements and installation effort.This model utilises the tried-and-tested, intrinsically safe lithium iron phosphate (LiFePO4) cell chemistry. Combined with the intelligent Battery Management System (BMS) and a wide range of monitoring options (including Bluetooth), the SE-F16 offers maximum safety, scalability and longevity for the self-sufficient energy supply of your home or business.Highlights at a glanceMassive storage capacity (16 kWh): With a rated capacity of 314 Ah at 51.2 V, this single module provides enough energy to reliably supply large households even during prolonged periods of low sunshine.Safe LiFePO4 cell chemistry: Lithium iron phosphate technology guarantees maximum thermal stability and virtually eliminates the risk of thermal runaway (fire hazard).High-performance power handling: The system supports an enormous continuous discharge current of up to 230 A and peak currents of 280 A (for 10 seconds), ideal for high-current, high-power consumers such as heat pumps or wallboxes.Extreme scalability: For even greater energy requirements, up to 32 units can be connected in parallel as standard. With a CAN bridge, it is even possible to scale up to 64 modules.Smart monitoring & connectivity: In addition to CAN 2.0 and RS485, the battery system features Bluetooth for convenient monitoring via a smartphone app. The “C” version (SE-F16-C) also has an integrated LCD display.Durability & Efficiency: Certified for over 6,000 charge cycles (at 25°C), ensuring decades of reliable operation in daily use.Flexible installation: Despite its heavy weight, the enclosure system is extremely flexible and can be installed either on the wall, floor-standing or stacked.Areas of applicationThe Deye SE-F16 is the perfect solution for demanding energy scenarios:Detached and terraced houses: Maximises self-consumption of PV electricity and, in combination with a hybrid inverter, provides a powerful emergency power supply for the entire building.Commercial and industrial (C&I) applications: Used to shave off expensive peak loads (peak shaving) and store large surpluses of PV energy on agricultural or commercial premises.Off-grid & stand-alone systems: Thanks to its enormous capacity and high continuous discharge rate, it provides a reliable energy source for completely off-grid installations.Installation & Safety InstructionsLogistics and weight: Weighing 109 kg, the module is extremely heavy. It must be installed using suitable lifting equipment (a stair climber) or by at least two to three people.Choice of location: The battery must be installed in a dry and, ideally, frost-free room (protection class IP21). Charging at temperatures below 0°C is automatically blocked by the BMS to protect the cells.Cable cross-sections: Due to the extremely high currents (up to 230 A continuous load), the connection cables to the inverter or busbar must have a cross-sectional area of at least 70 mm², or preferably 95 mm², to prevent overheating and voltage drops.Commissioning for parallel connection: If you are connecting several SE-F16 modules together, it is essential that all units are charged to exactly the same voltage level before cabling to prevent dangerous equalisation currents. FAQs on the Deye SE-F16What is the difference between the SE-F16 and the SE-F12?The main difference lies in the capacity and the height of the housing. The SE-F16 delivers 16 kWh (314 Ah) and weighs around 109 kg, whilst the SE-F12 11.8 kWh (230 Ah) and weighs approx. 84 kg. Both use the same 51.2 V architecture and are designed for identical applications; however, the F16 offers significantly greater autonomy per installed module.What does the ‘C’ in the model name SE-F16-C stand for?The suffix “-C” on Deye batteries indicates the extended model variant, which, in addition to Bluetooth monitoring, features a built-in LCD display on the front of the housing. This allows the current state of charge (SoC), cell voltages and warning messages to be read directly on the device without having to open the app.Do I absolutely need a Deye inverter for this battery?No, but it is strongly recommended for trouble-free operation. The SE-F16 is ‘Plug & Play’ compatible with Deye low-voltage hybrid inverters (such as the SG04 series), as the BMS protocol is natively compatible. For third-party brands (such as Victron, SMA or Solis), communication must first be configured manually via DIP switches or software settings. It is strongly recommended that you check the compatibility list, as manufacturers may make changes.