Skip to main content Skip to search Skip to main navigation
Menu
Description

Product information

FOX ESS Power Cube 5 kW with EQ5000 9.94 kWh – All-in-one system

This configuration of the FOX ESS Power Cube is the compact entry-level model in the EQ5000 series: the fanless HQ3-5.0-M hybrid inverter and two EQ5000 battery modules form an all-in-one system with 9.94 kWh. Thanks to 100 % depth of discharge, just under 10 kWh of solar power is available for the evening and night.

The inverter and storage system are well matched: with around 4.5 kW from the storage system, the system utilises almost the full inverter output of 5 kW. With up to 11 kWp of PV capacity, an integrated emergency power gateway and an operating noise level of under 40 dB, it is ideally suited to small to medium-sized detached houses.

At a glance

  • All-in-one: Inverter, storage and gateway in a single system
  • 9.94 kWh EQ5000 storage unit, 100 % usable according to the manufacturer
  • Around 4.5 kW from the storage system, almost the full inverter output
  • 5 kW hybrid inverter, three-phase, max. 5.5 kVA
  • Fanless: natural cooling, < 40 dB
  • Up to 11 kWp PV capacity on 3 MPP trackers
  • Expandable to up to 9 modules or 44.73 kWh
  • Emergency power for the whole house: 63 A bypass, off-grid operation < 20 ms
  • Black start from the battery is possible
  • IP66 for indoor and outdoor use
  • VDE-AR-N 4105 certified


This is how the system scales up

ModulesCapacity (100 % usable)Rated voltageOperating voltageStorage heightStorage weightPower from the storage system (calculated)
2 (this configuration)9.94 kWh89.6 V81.2–102.2 V276 mm82 kgapprox. 4.5 kW
314.91 kWh134.4 V121.8–153.3 V414 mm123 kgFull 5 kW, 6 kW charging
419.88 kWh179.2 V162.4–204.4 V552 mm164 kgfull power
524.85 kWh224.0 V203.0–255.5 V690 mm205 kgfull power
629.82 kWh268.8 V243.6–306.6 V828 mm246 kgfull power
734.79 kWh313.6 V284.2–357.7 V966 mm287 kgfull power
839.76 kWh358.4 V324.8–408.8 V1,104 mm328 kgfull power
944.73 kWh403.2 V365.4–459.9 V1,242 mm369 kgfull power

Width and depth: 570 × 380 mm. The performance figures apply to the HQ3-5.0-M.


Technical data for the HQ3-5.0-M inverter

PV input

  • Max. array power: 11,000 W
  • Max. PV output: 11,000 W
  • Max. voltage: 1,000 V (maximum operating voltage 950 V)
  • MPPT voltage range: 120–950 V, 120–850 V at full load
  • Start-up voltage: 140 V
  • Number of MPPT units / strings per MPPT: 3 / 1+1+1
  • Max. input current per MPPT: 20 A (short-circuit current 25 A)
  • Max. input power per MPPT: 10,000 W

AC output (mains)

  • Rated power: 5,000 W
  • Max. apparent power: 5,500 VA
  • Mains connection: 400/230 V or 380/220 V, 3L/N/PE, 50/60 Hz
  • Rated output current / max. current per phase: 7.6 A / 8.3 A
  • Power factor: 1 (adjustable from 0.8 capacitive to 0.8 inductive)

Battery connection

  • Battery type: Lithium-ion (LFP)
  • Battery voltage: 80–500 V
  • Minimum battery operating voltage: 85 V
  • Minimum battery voltage at full AC load: 108 V
  • Max. charging power / discharge power: 6,000 W / 5,000 W
  • Max. charging/discharging current: 50 A

Efficiency

  • Max. efficiency: 97.8 %
  • European efficiency: 97.0 %
  • PV to battery / battery to AC: 97.0 % each
  • MPPT efficiency: 99.9 %


Technical data for storage units (2 × EQ5000-S-P)

  • Cell chemistry: LFP (LiFePO₄)
  • Rated energy: 9.94 kWh
  • Rated voltage / Operating voltage: 89.6 V / 81.2–102.2 V
  • Recommended discharge current: 50 A
  • Max. charge/discharge current: 50 A (depending on temperature, cell voltage and SOC)
  • Peak discharge current (60 s): 65 A
  • Charging/discharging efficiency: > 95 % (at 25 °C, 0.3C)
  • Depth of discharge: 100 %
  • Operating temperature: Charging 0–55 °C, discharging −10–55 °C, with a warm-up function from −25 °C in each case
  • Storage temperature: -10–35 °C
  • Cooling: natural convection
  • Fire protection function: Yes
  • Protection rating: IP66
  • Dimensions (W × D × H): 570 × 380 × 276 mm
  • Weight: 82 kg (±5 %)
  • Certificates: IEC 62619, EN IEC 61000-6-1/2/3/4, UN38.3


Quiet in the home

The HQ3-5.0-M is naturally cooled and remains below 40 dB. As there is no fan, there are no moving parts that can wear out or collect dust, and the system can be easily installed in a utility room, basement or hallway.


Emergency power and off-grid operation

In grid-connected mode, the entire household power supply runs via the gateway, with up to 63 A per phase. In the event of a mains failure, the Power Cube switches to off-grid mode in under 20 ms. The inverter is rated for up to 5 kVA. Without sunlight, the storage system with two modules delivers around 4.5 kW. With a base load of 1 kW, the capacity is theoretically sufficient for just under ten hours.

  • Max. apparent power in off-grid mode: 5,000 VA
  • Peak apparent power (60 s): 6,000 VA
  • Max. continuous current per phase: 7.2 A
  • Max. unbalanced load power per phase: 1.6 kW
  • Switchover time: < 20 ms
  • Black start: Yes
  • Parallel operation: up to 4 devices

 

Smart Home, Monitoring and Security

According to the manufacturer, the Power Cube is designed for AI-supported energy management, dynamic electricity tariffs and virtual power plants (VPP). Interfaces: SG-Ready, remote control receiver, DRM, dry contact, meter connection, RS485, USB, Ethernet and Bluetooth. Monitoring via the FoxCloud 2.0 app or web portal via Wi-Fi, LAN or 4G.

  • IP66 for the inverter and storage unit
  • Surge protection Type II (PV and AC)
  • RCMU, insulation testing, anti-islanding protection
  • DC switch integrated
  • Arc Fault Circuit Interrupter (AFCI): optional
  • Fire protection function in the battery storage system

 

Installation and certifications

  • Installation: Floor-mounted, indoors or outdoors
  • Inverter operating temperature: −25 to +60 °C (power limitation from 45 °C)
  • Standby consumption: < 15 W
  • Inverter dimensions (W × H × D): 570 × 420 × 380 mm, 42.6 kg
  • Grid standards: VDE-AR-N 4105, VDE 0126-1-1, EN 50549-1, CEI 0-21, G98, AS4777.2-2020, IEC 62116, IEC 61727, IEC 61683
  • Safety/EMC of inverters: EN/IEC 62109-1/-2, IEC 61000-6-1/-2/-3, IEC 61000-4-2/3/4/5/6/8
Properties
Battery technology: LiFePO4
Battery voltage range: 81.20 ~ 102.20 V
Communication: Inverters: Meter, Wi-Fi/4G (optional), Bluetooth, DRM, Ethernet, USB, BMS (CAN), RS485, district heating control unit, SG-compatible, dry contact
Communication with BMS: CAN
Dimensions (W x D x H): 570 x 380 x 696 mm
Ingress protection rating for inverters: IP66
MPPT efficiency: 99.90 %
MPPT trackers / strings per tracker: 3 / 1+1+1
MPPT voltage range: 120–950 V
Max. AC apparent power: 5.50 kVA
Max. DC input power: 11,000 W
Max. DC input voltage: 1000 V
Max. PV input current: 20 + 20 + 20 A
Max. charge/discharge current: 50 A / 50 A
Max. efficiency: 97.80 %
Max. short-circuit current: 25 + 25 + 25 A
Nominal DC voltage: 620 V
Nominal voltage of storage units: 89.60 V
Off-grid operation (stand-alone / off-grid): Yes
Operating temperature (charging / discharging): 0 °C to +55 °C / -10 °C to +55 °C
Permissible humidity: 5 - 95%
Protection class for storage systems: IP65
Rated AC active power: 5 kW
Safety / EMC / Standards: EN/IEC 62109-1, EN/IEC 62109-2 / IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3, IEC 61000-4-2/3/4/5/6/8 / AS4777.2-2020, VDE-AR-N 4105, VDE 0126-1-1, G98, EN 50549-1, CEI 0-21, IEC 62116, IEC 61727, IEC 61683
Starting voltage: 140 V
Storage certifications: IEC 62619 / EN IEC 61000-6-1/2/3/4 / UN38.3
System capacity (rated value): 9.94 kWh
Type: ALL-IN-ONE Hybrid Storage System
Warranty: 10 years
Documents 1
Reviews 0

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.