Low-voltage PV kit 10.12 kWp with 15.36 kWh storage
€5,991.65
Prices include 19 % VAT, free delivery
Product information
Your high-performance solar system with a large storage unit – all in one kit
With this complete kit, you can generate your own solar power during the day and use it in the evenings and at night. The kit consists of three core components that work together: the solar modules generate the electricity. The hybrid inverter makes it usable for your household and controls the whole system. The battery storage system store any surplus for later use.
With 10.12 kWp and a 15.36 kWh storage unit, the kit is designed for households with high electricity consumption, such as those with a heat pump or an electric car. You’ll buy significantly less electricity from your energy supplier and be less dependent on rising electricity prices.
Who is this kit suitable for?
✅ Homeowners with high electricity consumption
✅ Households with an annual consumption of approx. 6,000–11,000 kWh (guide figure)
✅ Households with a heat pump or electric car
✅ Households with a three-phase domestic connection, as is common in Germany
✅ Anyone who wants to use as much solar power as possible themselves
Components explained simply
1. Solar modules: 22x JA Solar JAM54D41-460/LR
How it works: The modules are mounted on the roof and generate electricity from sunlight. Together, they have a capacity of 10.12 kWp. The unit ‘kWp’ (kilowatt-peak) describes the peak output under standard conditions.
Why these modules:
- n-type cell technology: This modern generation of cells delivers a module efficiency of 23.0 %. Even in hot conditions, the modules lose comparatively little power (−0.29 % per °C).
- Glass-on-glass construction: Both the front and rear consist of 1.6 mm glass instead of a plastic film. This provides better protection against moisture and the elements and ensures a long service life.
- Monofacial: The modules generate electricity via their front side. The glass on the rear serves to provide protection and ensure durability, not to generate electricity. Ideal for traditional installation on a pitched roof.
- Black design: The black modules blend discreetly into most roofs.
- Low degradation: The modules lose a maximum of 1 % of their output in the first year, and only 0.4 % per year thereafter. After 30 years, they will still be delivering at least 87.4 % of their original output.
- Warranty: 25-year product warranty and a 30-year linear performance warranty.
Good to know: Each module measures 1762 × 1134 mm and weighs 22 kg. It can withstand loads of 5400 Pa on the front (e.g. snow) and 2400 Pa on the back (e.g. wind suction).
2. Hybrid inverter: Deye SUN-8K-SG05LP3-EU-SM2
What it does: The modules generate direct current, but your household needs alternating current. The inverter converts the electricity. As a hybrid inverter, it also controls the batteries and automatically decides where the electricity flows: into the house, into the storage system or into the grid.
Why choose this inverter:
- 8 kW output, 3-phase: It feeds into all three phases of your domestic connection. This is standard for systems of this size.
- Unbalanced output: It can load the phases to different degrees, up to 50 % of the rated power (4 kW) per phase. This is useful because domestic appliances rarely use the phases evenly.
- High efficiency: Up to 97.6 % (Euro efficiency 97.0 %), meaning virtually no energy is lost during conversion.
- 2 MPP trackers: These are two independent solar inputs. This allows, for example, modules on two roof surfaces with different orientations to be operated separately.
- High charging power: It charges and discharges the batteries at up to 190 A, which is around 9.7 kW.
- Smart charge control: With 6 freely adjustable time slots, you can specify when the batteries are charged or discharged, for example to match a dynamic electricity tariff.
- Off-grid operation: According to the manufacturer, the inverter supports off-grid operation, i.e. operation without connection to the public grid. Whether and how your appliances will continue to be powered in the event of a power cut depends on the installation. Discuss this with your electrician.
- Future-proof: It supports AC coupling for retrofitting existing PV systems, charging via a diesel generator and parallel operation of up to 10 inverters.
- Rugged: IP65 protection against dust and water jets, operating temperature range from −40 to +60 °C.
- Complies with standards: It complies with the German grid connection guideline VDE-AR-N 4105.
Integrated protection functions: Insulation monitoring, residual current detection, anti-islanding protection, DC switch, reverse polarity protection and overvoltage protection (Type II, DC and AC).
Good to know: The inverter weighs 35.2 kg and has a noise level of up to 55 dB. A utility room, utility cupboard, basement or garage is therefore a more suitable location than a living area.
3. Battery storage: 3x Deye SE-F5C Pro (display version)
What they do: The storage units store surplus solar power and release it as soon as the modules are not supplying enough, particularly in the evening and at night.
Why choose these storage systems:
- 15.36 kWh capacity: Three modules of 5.12 kWh each. At the recommended depth of discharge of 90 %, approximately 13.8 kWh is available for use. This is sufficient to cover a large proportion of evening and night-time consumption for many households.
- LiFePO4 cells: Lithium iron phosphate is considered a particularly safe and long-lasting battery chemistry. Each battery can handle around 6,000 charge cycles.
- Protected by BMS: An integrated battery management system with active protection continuously monitors the cells.
- Perfect synergy: The battery and inverter communicate directly with each other (CAN/RS485), ensuring that charging takes place as dictated by the battery.
- Expandable: If your electricity demand continues to rise, you can connect up to 32 storage units in parallel (up to 64 with a CAN box). The charging and discharging power is limited to around 9.7 kW by the inverter. How much additional storage makes sense depends on your consumption and your PV output.
- Flexible installation: On the wall, on the floor or stacked (up to 6 storage units per stack).
- Warranty: 10 years or 16 MWh of energy throughput per storage unit (in accordance with Deye – warranty terms and conditions).
Important: The storage units have an IP21 protection rating and must be installed indoors, e.g. in the cellar, utility room or garage. Each storage unit weighs approx. 44 kg (approx. 132 kg in total) and measures 404 × 547 × 141 mm. Charging is possible at 0–55 °C, and discharging at −20–55 °C.
Scope of delivery
- 1x Deye SUN-8K-SG05LP3-EU-SM2 hybrid inverter (3-phase)
- 3x Deye SE-F5C Pro LiFePO4 battery storage units, each with a capacity of 5.12 kWh (display version)
- 22x JA Solar JAM54D41-460/LR glass-glass module, black, monocrystalline
FAQs on the low-voltage PV kit
What sort of household is this kit suitable for?
The kit is suitable for detached houses with high electricity consumption of around 6,000 to 11,000 kWh per year, e.g. those with a heat pump, an electric car or a large family. With a capacity of 10.12 kWp, a realistic annual solar power output of around 8,600 to 11,000 kWh can be expected in Germany, depending on the location, orientation and tilt.
How much roof space do I need?
One module measures 1762 × 1134 mm, i.e. around 2 m². For all 22 modules, you will need approximately 44 m² of pure module area, plus clearance around the edges. The total weight of the modules is around 484 kg.
Can I spread the modules across two roof areas?
Yes. The inverter has two independent solar inputs (MPP trackers). The 22 modules can, for example, be distributed as 2 × 11 modules on an east-facing and a west-facing side.
How much energy can I actually store?
The three SE-F5C Pro units have a combined rated energy capacity of 15.36 kWh. At the recommended depth of discharge of 90 %, you will have around 13.8 kWh of usable energy available.
Why a three-phase inverter?
In Germany, most houses have a three-phase connection. A three-phase inverter distributes the power across all three phases, which is standard for systems of this size. If required, it can also load the phases differently, with up to 4 kW per phase.
Is the kit suitable for a heat pump or an electric car?
Yes, the system size is designed to cope with high consumption. The storage unit can provide electricity generated during the day for use in the evening, with a discharge power of up to around 9.7 kW. How much solar power the heat pump and electric car actually use depends on the season and your usage patterns.
Can I expand the storage system later?
Yes. The SE-F5 Pro can be operated in parallel with up to 32 units, or up to 64 with a CAN box. Adding more storage increases the capacity, but the charging and discharging power remains limited to around 9.7 kW (190 A) due to the inverter.
Will the system work during a power cut?
According to the manufacturer, the inverter supports off-grid operation (stand-alone mode). Whether your appliances will continue to be powered in the event of a power cut depends on the installation. Seek advice from your electrician on this matter.
Where are the inverter and storage unit installed?
The storage units have an IP21 protection rating and must be located indoors, e.g. in the cellar, utility room or garage. The inverter has an IP65 protection rating but has a noise level of up to 55 dB. A utility room is therefore more suitable than a living area.
What does ‘low voltage’ mean and what are the advantages?
The storage units operate at a nominal voltage of 51.2 V (48 V class). Low-voltage systems are considered particularly safe to use and can be easily expanded in a modular fashion.
Why glass-glass modules, and what does ‘monofacial’ mean?
In glass-glass modules, a second pane of glass protects the rear instead of a plastic film. This makes them more durable and ensures minimal ageing, which is why JA Solar offers a 30-year linear performance warranty. ‘Mono-facial’ means that only the front side generates electricity. This is ideal for traditional roof installation.
What warranties apply?
Deye modules come with a 25-year product warranty and a 30-year linear performance warranty, guaranteeing a minimum output of 87.4 % after 30 years. Each SE-F5C Pro comes with a 10-year warranty or a 16 MWh energy output guarantee. The inverter comes with a 5- or 10-year warranty, depending on the installation location. The manufacturers’ respective warranty terms and conditions apply.
Can I install the system myself?
If you have some DIY skills, you can install the mounting structure and the modules yourself. However, connection to the domestic electricity supply and commissioning must be carried out by a registered electrician. Furthermore, the system must be registered with the grid operator and in the market master data register.
| Cell type: solar module: | N-type monocrystalline, 108 (6x18) half-cells |
|---|---|
| Charge/discharge current (rated value) per storage unit: | 100 A / 100 A |
| Colour of solar module: | Full Black |
| Communication: Inverters: | RS485 / RS232 / CAN |
| Communication Storage: | CAN2.0 / RS485 |
| Cycle life of storage systems: | ≥ 6,000 cycles (at 25 ± 2 °C, 70% EOL) |
| Grid approvals: | EC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Guideline R25, G99, VDE-AR-N 4105 |
| Ingress protection rating for inverters: | IP65 |
| Inverter warranty: | 5 years |
| MPPT efficiency: | > 99 % |
| MPPT trackers / strings per tracker: | 2 / 1+1 |
| Max. AC apparent power of the inverter: | 8.80 kVA |
| Max. charging/discharging current for inverters: | 190 A / 190 A |
| Max. rated power of solar modules: | 10.12 kWp |
| Maximum inverters efficiency: | 97.60 % |
| Modular design: | mono / bifacial |
| Module efficiency: | 23.0 % |
| Monitoring: | GPRS / Wi-Fi / Bluetooth / 4G / LAN (optional) |
| Nominal voltage of storage units: | 51.20 V |
| Off-grid operation (stand-alone / off-grid): | Yes |
| Operating temperature of inverters: | –40 to +60 °C |
| Operating temperature of storage units (charging / discharging): | 0 °C to +55 °C / -20 °C to +55 °C |
| Operating voltage per storage unit: | 44.8 ~ 57.6 V |
| Protection class for storage systems: | IP21 |
| Rated power of the inverter (AC): | 8 kW |
| Rated power per solar module: | 460 W |
| Safety / EMC / Standards: | IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 |
| Solar panel dimensions (L x W x H): | 1762 x 1134 x 30 |
| Solar panel warranty: | 25 years |
| Solar panel weight per: | 22 kg |
| Storage certifications: | UN38.3 / MSDS / CE / CB / VDE2510-50 / FCC / UL1973 / UL9540A / CEC |
| Storage system capacity (rated value): | 15.36 kWh |
| Storage warranty: | 10 years |
| Zellchemie Storage: | LiFePO4 |
Login