Skip to main content Skip to search Skip to main navigation
Menu
Description

Product information

A flexible introduction to energy storage technology with scope for future expansion

This low-voltage storage kit from Deye combines the three-phase SUN-8K-SG05LP3-EU-SM2 hybrid inverter with an SE-F5 Pro lithium iron phosphate battery module with a capacity of 5.12 kWh. It is particularly suitable for households with moderate electricity consumption and for anyone wishing to start with a compact storage system and expand their system later as required. The high-performance 8 kW inverter is designed for this right from the start. The inverter and battery are from the same manufacturer and communicate directly with each other via CAN or RS485. This significantly simplifies installation and commissioning.

Deye SUN-8K-SG05LP3-EU-SM2: High-performance and future-proof

The hybrid inverter delivers a three-phase rated output of 8 kW (max. 8.8 kVA). It is designed for large PV systems: up to 16 kW of PV power can be connected, with a maximum PV input power of 12.8 kW. Two MPP trackers, each with an input current of 20 A and a wide MPPT voltage range of 200 to 650 V, ensure maximum yield even from roofs with varying orientations, such as east/west. With an efficiency of up to 97.6 % (Euro efficiency 97.0 %) and an MPPT efficiency of over 99 %, virtually no energy is lost.

The inverter supports charging and discharging currents of up to 190 A. With a single battery module, the BMS limits the battery current to the module’s permissible continuous current of 100 A, which corresponds to approximately 5 kW of battery power at nominal voltage. With each additional module, the usable battery capacity increases; from two modules onwards, the inverter’s full output current can be utilised.

In the event of a power cut, the inverter continues to supply your home in off-grid mode. The 100 % unbalanced output allows for up to 50 % of the rated power per phase. This is a real advantage in everyday life where loads are unevenly distributed.

In addition, the inverter offers the following functions:

  • AC coupling for retrofitting existing PV systems
  • Integration of a diesel generator
  • six freely adjustable time slots for charging and discharging, ideal for dynamic electricity tariffs
  • Parallel connection of up to 10 units in on-grid and off-grid operation

The IP65-rated housing is designed for an operating temperature range of -40 to +60 °C (power reduction from 45 °C). At a maximum of 55 dB, the unit operates pleasantly quietly. The grid connection complies with VDE-AR-N 4105.

Deye SE-F5 Pro (Config C): Safe LiFePO4 storage system with display

The SE-F5 Pro module utilises long-lasting and thermally stable lithium iron phosphate (LiFePO4) cells. It offers 5.12 kWh at 51.2 V and 100 Ah. The Config version C features a display for showing the battery status directly. The advanced BMS with active fuse and the integrated circuit breaker ensure comprehensive protection.

With at least 6,000 cycles, a guaranteed energy throughput of 16 MWh and a 10-year manufacturer’s warranty, the storage system is designed for long-term, cost-effective operation. The module supports a continuous current of 100 A (1C) and a short-circuit current of 150 A for 120 seconds. The storage system can be expanded to up to 32 modules in parallel, or even up to 64 with a CAN box. The modules can be mounted on a wall, on the floor or stacked, with up to 6 modules per stack. Using the optional Wi-Fi/Bluetooth module and the Deye app, you can monitor the battery locally or remotely, together with the inverter.

Your benefits at a glance

You will receive a fully coordinated complete set from a single source, comprising:

  • 8 kW three-phase output
  • up to 16 kW PV connected load
  • 5.12 kWh storage capacity as an entry-level option

The inverter is already designed for significantly larger storage systems, so you can easily expand the capacity later by adding further modules. The emergency power capability ensures your supply is maintained during grid outages. The LiFePO4 technology, backed by a 10-year warranty, ensures a long service life. The 48 V low-voltage technology also offers greater safety during installation and maintenance than high-voltage systems.


Contents of the pack

  • 1x Deye SUN-8K-SG05LP3-EU-SM2 3-phase hybrid inverter
  • 1x Deye SE-F5 Pro LiFePO4 battery module, Config Version C with display (5.12 kWh)
 

FAQs on the Deye Low-Voltage PV Storage Kit 

Which households is this kit suitable for?
The kit is designed for households with a three-phase mains connection and moderate electricity consumption, who primarily wish to cover their evening consumption with their own solar power. It is also ideal as a starting point for anyone operating a large PV system who wishes to expand the storage capacity gradually at a later date. For higher consumption – for example, with a heat pump or electric car – the variants with two storage modules (10.24 kWh) or three storage modules (15.36 kWh) are often the more suitable choice.

How much PV power can I connect to the inverter?
The SUN-8K-SG05LP3-EU-SM2 supports a PV connected load of up to 16 kWp; the maximum PV input power is 12.8 kW. The modules are distributed across two MPP trackers, each handling one string. Each tracker handles up to 20 A of input current within an MPPT voltage range of 200 to 650 V. The maximum DC input voltage of 800 V must not be exceeded, even at low temperatures. String planning should therefore be carried out by a specialist contractor.

How much storage capacity is actually usable?
The capacity is 5.12 kWh. Deye recommends a depth of discharge of 90 %. This provides around 4.6 kWh of usable energy for everyday use. This reserve protects the cells and extends their service life.

Does the system still work during a power cut?
Yes. In the event of a power cut, the hybrid inverter can continue to operate in off-grid mode and supply your home with three-phase power from the battery and the PV system. During the day, solar power is also available. At night, the single module limits the available power to around 5 kW continuously and to approximately 7.7 kW for short periods (150 A for 120 seconds). The inverter’s double rated power for inrush currents is therefore not fully available in pure battery mode with a single module. A prerequisite for emergency power operation is that the emergency power consumers are wired accordingly during installation.

Can I expand the storage system later?
Yes, this kit is designed precisely for that purpose. The SE-F5 Pro modules can be expanded in parallel to up to 32 units, and with a CAN box even up to 64. With a second module, you can achieve 10.24 kWh; with a third, 15.36 kWh. The inverter can also be operated in parallel with up to 10 units if you require more power at a later date. For an upgrade, we recommend modules of the same type.

Can I install the battery outdoors or in the garage?
The inverter has an IP65 protection rating and is suitable for outdoor installation. The battery module, on the other hand, has an IP21 protection rating and must be installed in a dry indoor location, such as a cellar or utility room. The battery can only be charged between 0 and 55 °C and discharged between -20 and 55 °C. Charging is therefore restricted in unheated rooms where frost is a risk.

How long does the battery last?
Deye It specifies a cycle life of at least 6,000 cycles (at 25 °C down to 70 % residual capacity). Assuming one full cycle per day, this equates to over 16 years. In addition, Deye offers a 10-year warranty or a 16 MWh energy output guarantee. The manufacturer’s warranty terms and conditions apply.

What is the warranty for the inverter?
Deye The inverter comes with a 5-year warranty. 

Can I retrofit an existing PV system?
Yes. The inverter supports AC coupling, meaning that an existing PV system with its own inverter can be integrated. This also allows an older system – for example, once EEG subsidies have ended – to be supplemented with a storage unit.

Can I connect a generator?
Yes. The inverter supports the integration of a diesel generator, for example for off-grid applications or as an additional safeguard during prolonged power cuts.

How do I monitor my system?
Using an optional data logger module (Wi-Fi, Bluetooth, 4G, GPRS or LAN), the system can be monitored via the ‘ Deye ’ app. With the battery’s optional Wi-Fi/Bluetooth module, you can also read the battery’s status locally via Bluetooth, without needing an internet connection. In the app, you can view generation, consumption, grid draw, feed-in and state of charge in real time. The display on the Config Version C also shows the battery status directly on the module.

Can I install the kit myself?
No. Installation and commissioning must only be carried out by a qualified electrician. The system must also be registered with the grid operator and entered in the market master data register. The inverter complies with the VDE-AR-N 4105 standard required in Germany.

Properties
Charge/discharge current (rated value) Storage: 100 A / 100 A
Communication: Inverters: RS485 / RS232 / CAN
Communication Storage: CAN2.0 / RS485
Cycle life of storage systems: ≥ 6,000 cycles (at 25 ± 2 °C, 70% EOL)
Grid approvals: IEC 61727 / IEC 62116 / CEI 0-21 / EN 50549 / NRS 097 / RD 140 / UNE 217002 / OVE Directive R25, G99 / VDE-AR-N 4105
Ingress protection rating for inverters: IP65
Inverter warranty: 5 years
MPPT efficiency: > 99 %
MPPT trackers / strings per tracker: 2 / 1+1
Max. AC apparent power of the inverter: 8.80 kVA
Max. charging/discharging current for inverters: 190 A / 190 A
Maximum inverters efficiency: 97.60 %
Monitoring: GPRS / Wi-Fi / Bluetooth / 4G / LAN (optional)
Nominal voltage of storage units: 51.20 V
Off-grid operation (stand-alone / off-grid): Yes
Operating temperature of inverters: –40 to +60 °C
Operating temperature of storage units (charging / discharging): 0 °C to +55 °C / -20 °C to +55 °C
Operating voltage of storage systems: 44.8 ~ 57.6 V
Protection class for storage systems: IP21
Rated power of the inverter (AC): 8 kW
Safety / EMC / Standards: IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
Storage certifications: UN38.3 / MSDS / CE / CB / VDE2510-50 / FCC / UL1973 / UL9540A / CEC
Storage system capacity (rated value): 5.12 kWh
Storage warranty: 10 years
Zellchemie Storage: LiFePO4
Documents 2
Reviews 0

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.