Felicity Apollo-5KLP1G01-MX AIO Inverter

The Deye GB-L-PRO4.1 is a state-of-the-art expansion module for the GB-L high-voltage battery series from Deye. With a gross capacity of 4.09 kWh serves as a building block for scalable energy storage systems in the residential and small commercial sectors. By combining several modules, the capacity can be precisely tailored to individual energy requirements.Based on the secure lithium iron phosphate technology (LiFePO4) the module offers exceptional cycle stability and thermal stability. The innovative stacking design enables a wireless connection between the modules, which minimises installation effort and ensures a clean, compact appearance.Highlights at a glanceScalable energy: One module offers a capacity of 4.09 kWh – a bespoke high-voltage system can be built by simply stacking several units.Safe LiFePO4 technology: The cobalt-free cell chemistry guarantees maximum safety and a long service life, and virtually eliminates the risk of thermal runaway.Plug-and-play installation: Thanks to integrated plug-in contacts, there is no need for complex DC cabling between the individual battery modules during stacking.High efficiency: As part of a high-voltage system, the module operates with minimal conversion losses, which increases the efficiency of the entire PV system.Robust & Durable: Designed for over 6,000 charge cycles, the module offers a future-proof investment in your energy independence.Protection class IP65: The housing reliably protects the sensitive electronics from dust and water spray, making it ideal for a variety of installation locations.Areas of applicationThe GB-L-PRO4.1 module is the flexible basis for a wide range of storage solutions:System extensionEasily scale up your existing Deye GB-L battery storage system by an additional 4.09 kWh if your energy requirements increase (e.g. due to an electric car or a heat pump).New installations in residential areasCombine 2 to 6 modules to form a powerful high-voltage tower for maximum self-consumption of electricity.Commercial storage solutionsCreation of larger storage capacities by connecting several battery towers in parallel to manage peak loads.Installation & Safety InstructionsRequired componentsPlease note that at least one battery management system (GBL-PRO BMS) and a base plate (Base) are required. The module alone is not operational.Stacking limitsPlease note the maximum number of modules per tower as specified for your Deye system (usually up to 6 modules per BMS).Condition of the modulesIn the event of a subsequent expansion, the existing modules and the new module should be brought to a similar state of charge (SOC balancing) to enable optimal balancing by the BMS. Features Model**Deye GB-L-PRO4.1** Rated energy**4.09 kWh** Rated voltage**102.4 V** (per module) Battery typeLithium iron phosphate (LiFePO4) Max. charging/discharging current50 A Usable energy (90% DoD)3.68 kWh Dimensions (W/H/D)540 / 232 / 385 mm Weightapprox. 45 kg CertificationsCE, IEC62619, VDE2510-50, UN38.3  FAQs on the Deye GB-L-PRO4.1 battery moduleCan I connect a single 4.09 kWh module directly to the inverter?No.As this is a high-voltage system, a minimum number of modules (usually 2 or 3, depending on the inverter specifications) and the associated control unit (BMS) are essential to achieve the required operating voltage.How long is the warranty on the Deye battery modules?Usually 10 years.Deye typically offers a 10-year performance warranty or a specified cycle count for its LiFePO4 storage modules, provided that the installation has been carried out by qualified personnel.Can I install the module outdoors?Yes, subject to certain conditions.Thanks to IP65, the module is weatherproof. Nevertheless, the installation site should be protected from direct sunlight and extreme frost to preserve the cell chemistry and optimise the efficiency of the optional heating function.Do I need to purchase additional cables if I scale the system?No.Power and communication are connected directly via the integrated connectors when the modules are stacked. Only the connection from the BMS to the inverter requires a suitable cable set. However, this is included with the PDU and the Base. Please contact the sales department if you have any questions.How heavy is a battery tower with 4 modules?Quite substantial.A single module weighs approx. 39 kg. A tower consisting of 4 modules, including the BMS and base, weighs over 170 kg. It is therefore essential that you check the load-bearing capacity of your floor. Scope of delivery: Deye GB-L-PRO4.1 – 4.09 kWh battery module for modular high-voltage storage solutions 1 x Deye GB-L-PRO4.1 battery moduleA modular LiFePO4 storage element with a nominal capacity of 4.09 kWh and a cell voltage of 51.2 V (connected in series in the stack to form a high-voltage unit).1 x set of connection accessories (internal)Includes the internal connectors and fastening elements required to connect the module mechanically and electrically to the next module in the stack.1 x communication cable (daisy-chain)A short data cable for forwarding the BMS information to the next battery module within the tower.1 x earthing cableA protective conductor cable (yellow-green) for proper earthing of the module housing within the overall system.1 x assembly and fixing setIncludes screws and securing elements to fasten the modules to one another and prevent slipping.1 x operating and installation instructions (user manual)A printed manual containing technical data, safety instructions and instructions for the correct stacking of the modules.

The Deye SE-F5 Pro-C is a state-of-the-art 5.12 kWh battery storage module based on safe lithium iron phosphate (LiFePO4) technology. As part of the "Pro" series, this 51.2V low-voltage battery has been specially developed for seamless integration with Deye hybrid inverters and other common 48V systems.The storage unit is characterised by its high energy density, the cobalt-free chemistry and the intelligent battery management system (BMS). The SE-F5 Pro-C is the ideal solution for residential and commercial applications requiring reliable optimisation of self-consumption (solar) or a robust emergency power supply. Thanks to its modular design, the capacity can be flexibly expanded from 5 kWh up to the high double-digit kWh range.Highlights at a glanceSafest cell chemistry (LiFePO4): Uses lithium iron phosphate, which is extremely thermally stable, does not burn and is considered the safest lithium technology on the market.High capacity (5.12 kWh): Provides 100 Ah at a nominal voltage of 51.2 V in a compact housing, ideal for long operating times.Long service life (6000+ cycles): Designed for over 6000 charge/discharge cycles (at 25°C, 90% DOD), which corresponds to a service life of well over 10-15 years.Intelligent BMS: The integrated battery management system protects against overcharging, deep discharge, overcurrent and overtemperature, and ensures active cell balancing.Environmentally friendly (cobalt-free): The battery contains absolutely no toxic cobalt, which minimises the environmental impact during both manufacture and disposal.Flexible scalability: Supports the parallel connection of up to 32 units (up to 64 in some cases, depending on the module) to achieve storage capacities of over 160 kWh.Easy installation: Thanks to its standard 19-inch dimensions, the module is perfectly suited for rack systems or wall mounting (with suitable brackets).Deye compatibility: Perfectly matched to Deye hybrid inverters (automatic detection via CAN bus), but also compatible with Victron, Growatt, SMA etc. (depending on protocol).Areas of applicationThe Deye SE-F5 Pro-C is highly versatile:Optimisation of self-consumption: Storage of surplus PV electricity for use at night.Emergency power systems (backup): A reliable power source in the event of a power cut.Peak Shaving: Peak load shedding in commercial premises.Off-grid systems: Stand-alone systems without a grid connection.Technology & BenefitsThe SE-F5 Pro-C stands out thanks to the following technical features:LFP technology: Unlike NMC batteries, LiFePO4 does not tend to experience "thermal runaway" if damaged. This makes installation in the home particularly safe.Smart communication: The BMS actively communicates with the inverter. It reports state of charge (SOC), state of health (SOH) and temperature in real time, enabling the inverter to dynamically adjust the charging curve.Soft start: Integrated pre-charge resistors prevent high inrush currents that could trip fuses when the battery is switched on. Installation & operating instructionsCabling: Standard battery cables (often 25mm² or 35mm²) with Amphenol or M-type screw terminals (check depending on model!) are required for connection to the inverter. The communication cable (RJ45, CAN bus) is essential for the warranty.Addressing: When connected in parallel, the batteries often need to be addressed via DIP switches (master/slave configuration), with the master handling communication with the inverter.Temperature: Lithium batteries should not be charged at temperatures below 0°C. The BMS stops charging in frosty conditions to protect the cells. Ideal operating range: 15°C to 30°C. Features ModelDeye SE-F5 Pro-C (Cobalt Free) Technology**LiFePO4** (lithium iron phosphate) Rated voltage**51.2 V** Rated capacity**100 Ah** Energy content**5.12 kWh** Recommended depth of discharge (DOD)90% (for maximum service life) Cycle life**≥ 6000 cycles** (at 25°C, 0.5C rate) CommunicationCAN 2.0 / RS485 (Perfectly matched to Deye inverters) Dimensions (W x D x H in mm)440 x 530 x 133 (standard **3U** rack height) Weight (kg)approx. **45.0 kg**  FAQs on the Deye SE-F5 Pro-CDoes this battery also work with other inverters?Yes. Deye uses standard protocols (Pylontech protocol, among others). The battery is compatible with many 48V low-voltage inverters, provided the relevant protocol is selected in the BMS or inverter. However, it offers the best performance within the Deye ecosystem. It is strongly recommended that you check the compatibility list beforehand.What is the difference compared to the SE-G5.1 Pro?The designations (Pro, Pro-C, Pro-B) often refer to revisions in the casing design, chip availability or certifications (e.g. UL certificates for specific markets). The core technical specifications (5.12 kWh, LFP) are usually identical. The "C" version is often the current variant, optimised for the European market.Can I expand the battery later?Yes, no problem. You can connect additional modules in parallel at any time to increase capacity. The BMS compensates for differences in charge between new and old modules to a certain extent. However, it is recommended to combine modules with a similar state of ageing or to perform a one-off full balancing of the system. Scope of delivery: Deye SE-F5 Pro-C (5.12 kWh)This product is a set and consists of the inverter unit and the separate battery modules.1 x Deye SE-F5 Pro-C battery moduleThe main unit with 5.12 kWh capacity, integrated battery management system (BMS) and LCD display for status indication.1 x wall bracket (Mounting Bracket)A mounting plate that is fixed to the wall in order to securely hang the battery module.1 x set of battery connection cablesUsually includes a negative battery cable as well as the positive connection plug (or a pair of cables) for connection to the inverter.1 x RJ45 communication cableRequired for the data connection between the battery (PCS port) and the hybrid inverter.1 x grounding cable (Grounding Cable)A yellow-green cable for the proper protective earth connection on the housing.1 x set of mounting materialConsisting of expansion plugs (usually M6x100), screws (M4) and hexagon screws for fixing to the bracket.4 x stacking brackets (Stacking Brackets)Special brackets that are required if several modules are not hung on the wall, but are instead to be stacked on top of each other on the floor.1 x positioning template (Positioning Paperboard)A cardboard template for marking the drill holes for the wall bracket exactly.1 x user manual (User Manual)Technical manual with installation instructions and safety information.

The Deye SE-G5.1Pro-B is a high-performance battery module with a storage capacity of 5.12 kWh, based on safe lithium iron phosphate (LiFePO4) technology. With its modular design, support for high-current applications and flexibility in installation, it is the ideal solution for modern energy storage systems in both domestic and commercial settings.Highlights at a glanceSafe & durable: Cobalt-free LiFePO₄ cells with intelligent BMS Modular and scalable: Up to 64 modules – max. 327 kWh storage capacity High compatibility: Suitable for wall mounting, floor mounting & 19" rack Easy maintenance: Automatic networking, remote monitoring & USB firmware updates Reliable operation: IP20, natural cooling, wide temperature range down to -20 °CCompact, scalable & intelligently networkedWith an individual capacity of 5.12 kWh, the Deye SE-G5.1Pro-B is ideal for smaller storage solutions or as a component in large-scale modular storage systems. Thanks to the ability to connect up to 64 units in parallel, a maximum total capacity of 327 kWh is achievable. Perfect for applications with growing energy requirements. Automatic network addressing and support for firmware updates via USB or remote access significantly simplify commissioning and maintenance.Flexible mounting – space-saving & easy to installThanks to three mounting options—rack mounting (19-inch), wall mounting or floor installation—the module can be optimally positioned in almost any environment. With its compact design, measuring just 133 mm in height, it saves valuable space in technical rooms or living areas.Who is the Deye SE-G5.1Pro-B suitable for?Private households looking for a safe and sustainable storage system Commercial enterprises requiring scalable storage solutions for self-consumption or backup System integrators & installers who value easy integration and low maintenance Sustainability-minded users who rely on environmentally friendly storage technology ModelDEYSE-G5.1 Pro-B Battery typeLiFePO4 Module capacity (kWh)5.12 Module nominal voltage (V)51.2 Module capacity (Ah)100 System nominal voltage (V)51.2 System operating voltage (V)43.2-57.6 System capacity (kWh)5.12 System Usable Capacity (kWh)4.6 Charging/discharging current (A) - Recommendation50 Charging/discharging current (A) - rated value100 Charging/discharging current (A) - Peak discharge (2 min,25°C)150 Operating temperature (°C)Charging: 0 ~ 55 / Discharging: -20 ~ 60 LCD displaySOC%, Power, Total Voltage Communication portCAN2.0, RS485 Humidity5% ~ 90% Altitude≤2000m IP rating of the enclosureIP65 Storage temperature (°C)0 ~ 35 Dimensions (W/D/H, mm)440 * 133 * 540 Weight (kg)45 Installation locationFloor mounting, rack mounting Recommended discharge depth90% Cycle life25 ± 2°C, 0.5C/0.5C, EOL70% ≥ 6000 Warranty10 years CertificationsUN38.3, IEC62619, CE, UK, VDE2510-50, CEI 0-21, FCC, UL1973, UL9540A  FAQs on the Deye SE-G5.1Pro-B battery storage systemHow much energy is actually usable?One module provides 5.12 kWh gross capacity, of which approximately 4.6 kWh is usable at a 90% depth of discharge; particularly suitable for residential and commercial applications.What are the applicable voltages and currents per module?The module operates at a nominal voltage of 51.2 V and has a capacity of 100 Ah. The continuous current is 50 A, with a peak current of up to 150 A possible for 10 seconds.How many modules can be combined?In the IP20 version, up to 64 modules can be connected in parallel, corresponding to a total capacity of over 327 kWh. Common in domestic applications: six modules per tower, i.e. 30.7 kWh per unit.What is the module's lifespan?The cells achieve over 6,000 cycles at 90% DoD, with a residual capacity of at least 70% at end of life, meaning they are designed for long-term use.Which Deye inverters is the system compatible with?The battery is officially approved for all three-phase hybrid inverters in the SUN-xK-HP3 and SUN-xK-BM series and is fully plug-and-play compatible without the need for additional adjustments. We strongly recommend checking the compatibility list, as the manufacturer may make changes. Contents of delivery Deye SE-G5.1Pro-B rack battery module (5.12 kWh): Module typeThis is a a single, flexible low-voltage battery module for installation in 19-inch racks, wall mounting or floor-standing.1 x Deye SE-G5.1Pro-B battery module (5.12 kWh)The central storage unit with 5.12 kWh (100 Ah) in rack format, including an intelligent, integrated battery management system (BMS).1 x set of mounting handles / rack earsHandles for easier handling and for securing the module in a 19-inch server rack.1 x set of battery connection cables (positive & negative)A pair of pre-assembled high-performance cables for connecting the module (or battery stack) to a compatible hybrid inverter.1 x communication cable (CAN/RS485)A data cable for communication between the battery module and the inverter.1 x parallel connection cable (power & communication)Short cables to connect this module’s power and data bus to another module.1 x earthing cableA protective earth cable for the correct earthing of the housing.1 x User and Installation GuideA printed manual describing the various installation types (rack, wall, stacking).2 x wall bracketsFor wall mounting the battery pack 4 x feetFor stacking and securing the battery

The Deye SUN-20K-SG01HP3-EU-AM2 is a powerful three-phase hybrid inverter with high-voltage battery compatibility. It impresses with high efficiency, flexible application possibilities and maximum scalability – ideal for demanding solar systems in residential and commercial projects.Highlights at a glance20 kW rated output & high-voltage battery compatibility for maximum efficiency Up to 10 devices can be connected in parallel, ideal for modular large-scale systems 100 % unbalanced output, each phase individually usable 6 freely adjustable charging/discharging time windows for smart energy management Robust IP65 housing & support for diesel generatorsEfficient energy conversion with high-voltage technologyThe SUN-20K-SG01HP3-EU-AM2 uses high-voltage lithium-ion batteries (160–700 V), which enable particularly high charging and discharging efficiency. With an MPPT efficiency of 99.9 % and a maximum efficiency of 97.6 %, it ensures optimum use of available solar energy even in variable weather conditions.Flexibility and scalabilityThanks to the possibility of connecting up to 10 devices in parallel, the inverter is suitable for both complex new builds and upgrades of larger systems. Two independent MPP trackers, each with two inputs, optimise energy yield across multiple module fields. Six freely definable time windows for charging and discharging the battery provide maximum control and adaptability.Reliability and protectionThe inverter is equipped with comprehensive protection mechanisms, including reverse polarity protection, anti-islanding, insulation and short-circuit monitoring and overvoltage protection. The IP65 protection class enables safe outdoor use, while intelligent cooling and quiet operation (< 55 dB) ensure low-maintenance operation.Who is the Deye SUN-20K-SG01HP3-EU-AM2 suitable for?This inverter is ideal for: Commercial businesses with high energy demand and storage needs Homeowners aiming for maximum self-sufficiency with high-voltage technology Installers planning flexible, future-proof systems Project developers implementing AC-coupled retrofit solutionsOff-grid systems with diesel generator or hybrid operation  ModelDEYE SUN 20K-SG01 HP3-EU-AM2 Battery input data Battery typeLi-lon Battery voltage range (V)160~700 Max. charging current (A)37 Max. discharging current (A)37 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)32000 Nominal PV input voltage (V)1000 Start voltage (V)180 MPP voltage range (V)150-850 Nominal DC input voltage (V)600 PV input current (A)26+26 Max. PV short-circuit current (A)39+39 Number of MPPT2 Strings per MPPT2+2 AC output data AC rated power and UPS power (W)20000 Max. AC output power (W)22000 AC rated output current (A)30,4 / 29 Maximum AC rated output current (A)33,4 / 31,9 Max. continuous AC current (A)80 Peak output (without grid)1.5 times rated power, 10 S Generator input/intelligent load/AC coupling current (A)30,4 / 80 / 30,4 Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesAnti-islanding protection, reverse polarity protection at the PV string input, insulation resistance detection, residual current monitoring unit, output overcurrent protection, output short-circuit protection, output overvoltage protection Overvoltage categoryDC Type II/AC Type III Certifications and standards Grid approvalsVDE4105 IEC61727/62116 VDE0126 AS4777.2 CEI 0 21 EN50549-1 G98 G99 C10-11 UNE217002 NBR16149/NBR16150 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C derating CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN Weight (kg)30.5 Size (mm)408B×638H×237T（without connectors and brackets） Degree of protectionIP65 Installation styleWall mount Warranty10 years  FAQs about the Deye Sun 20K High Voltage Hybrid InverterWhich grid codes are stored in the inverter?The inverter contains all common grid codes, which can be directly changed in the "Setting → Grid" menu. These include, among others, VDE-AR-N 4105 for Germany, EN 50549 for the EU, CEI 0-21 for Italy, G98 and G99 for Great Britain, OVE R25 for Austria, RD 1699 or RD 14 for Spain as well as NRS 097-2-1 for South Africa. Usually, no additional NA protection is required once the appropriate country profile has been activated.Which high-voltage batteries are compatible and how do I set the BMS correctly?Released storage solutions include, among others, BYD HVS and HVM, Pylontech Force H1 and H2, Dyness Tower as well as the Deye GB-L Series. Each storage unit is associated with a specific setup number, which is selected in the "Battery → Lithium → Setup Number" menu. Alternatively, the same number can be set via the DIP switches on the battery. Other models follow the same procedure and are listed in the compatibility list. As compatibility is constantly changing, it is recommended to check with the manufacturer beforehand.How much PV power can I connect without the inverter clipping?According to the data sheet, up to 26 kW DC input power is allowed, while the AC output power is 20 kW. This results in a good DC/AC ratio. In practice, around 22 to 24 kWp is recommended.How loud is the inverter in operation?In standby mode, the inverter remains almost silent, as the fans only start running at temperatures above 50 degrees Celsius or under sustained load. In normal operation, the noise level is below 45 decibels. At full load, a distinct airflow noise can be heard, but it remains below the maximum sound pressure of 55 decibels, as specified by the manufacturer. The unit is therefore well suited for basements and technical rooms.Can settings and firmware updates be carried out via the app?Via Deye Cloud or SUN-APP, all settings can be operated remotely. This includes changes to charging and export parameters, firmware updates for inverter, BMS and HMI as well as a possible emergency shutdown of the unit. The connection is made via WLAN, LAN or via the factory hotspot network. Additionally, RS485, CAN and 4G sticks are available for integrating external systems. Scope of delivery: Deye SUN-20K-SG01HP3-EU-AM2 (20 kW HV Hybrid Inverter) 1 x Deye SUN-20K-SG01HP3-EU-AM2 inverterA powerful three-phase high-voltage hybrid inverter with 20 kW power, integrated LCD touchscreen and two MPPT trackers.1 x wall mount bracketA robust metal mounting rail for secure attachment of the heavy device to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communications module for connection to the Internet for remote monitoring via Deye Cloud or Solarman App.3 x current transformers (CT - Current Transformer)External folding current transformers for measuring energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The necessary sets of DC plug connectors (plus and minus) for connecting the PV strings to the inverter.1 x set of battery connection plugs (high voltage)Special high-voltage plug connectors for the safe electrical connection of a compatible HV battery storage unit.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter and battery management system.1 x mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for the proper installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, circuit diagrams and safety information.

The Deye SUN-20K-SG05LP3-EU-SM2 offers a reliable and efficient solution for energy conversion in photovoltaic systems. With its high charging and discharging capacity and support for various battery types, it is ideal for demanding energy projects.Highlights at a glanceHigh performance: 20 kW rated output for high energy requirements Flexible battery selectionCompatible with lead-acid and lithium-ion batteries High charging/discharging current: Up to 350A for fast power transmission Expandable: Parallel connection of up to 10 devices possible Robust designIP65 protection class for use in various environments Efficient energy conversion for modern requirementsThe Deye SUN-20K-SG05LP3-EU-SM2 is specially designed to meet the requirements of modern photovoltaic systems. With its three-phase output power and support for 48V low-voltage batteries, it offers an efficient solution for energy conversion and storage.Flexibility and scalabilityThanks to the option of connecting up to 10 devices in parallel, the inverter can be flexibly adapted to different system sizes. The support of both lead-acid and lithium-ion batteries enables customised adaptation to specific energy requirements.Reliability and protectionWith a protection class of IP65, the inverter is protected against dust and water, ensuring reliable operation in different environments. The integrated protective functions ensure safe and stable operation of the system.Who is the Deye SUN-20K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for: Operators of larger solar systems who are looking for a flexible and safe storage solution Commercial enterprises that want to cover energy peaks or work off-grid Homeowners who want to maximise their self-consumption rate Users with diesel generator support who are aiming for maximum self-sufficiency  ModelSUN-20K-SG05LP3-EU-SM2 Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60V Max. Charging current (A)350A Max. Discharge current (A)350A Charging strategy for Li-ion batterySelf-adaptation to BMS Number of battery inputs2 Input data of the PV string Max. DC input power (W)32000W Max. DC input voltage (V)800V Starting voltage (V)160V MPPT voltage range (V)160V-650V Rated DC input voltage (V)550V Max. Operating PV input current (A)36+36A Max. Input short-circuit current (A)54+54A Number of MPP trackers/Number of MPP tracker strings2/2+2 AC input/output side Rated AC input/output effective power20000 Max. AC input/output apparent power22000 AC input/output rated current (A)30.4/29 Max. AC input/output current (A)33.4/31.9 Max. Continuous AC passthrough (mains for charging)70 Peak power (without mains)2x rated output power, 10s Setting range of the power factor0.8 leading to 0.8 trailing Nominal input/output voltage/range (V)220/380V, 230/400V 0.85Un-1.1Un Nominal input/output mains frequency/range(Hz)50/45-55, 60/55-65 Form of the mains connection3L+N+PE Total harmonic current distortion (THDi)<3% ( rated power ) DC current power supply<0.5% In Efficiency Max. Efficiency97,6% Euro efficiency97,0% MPPT efficiency>99% Protection of the devices IntegratedDC reverse polarity protection, AC output overcurrent protection, AC output overvoltage protection, AC output short-circuit protection, thermal protection, DC terminal insulation impedance monitoring, DC component monitoring, earth fault current monitoring, power grid monitoring, protection against islanding, earth fault detection, overvoltage load shedding protection, residual current monitoring (RCD), overvoltage category Overvoltage protection levelTYPE II(DC), TYPE II(AC) Interface Communication interfaceRS485/RS232/CAN Monitor modeGPRS/WIFI/Bluetooth/4G/LAN (optional) General data Operating temperature range (℃)-40 to +60°C, >45°C power reduction Permissible ambient humidity0-100% Permissible height3000m Noise (dB)<60 dB(A) Protection classIP 65 Inverter topologyNon-insulated Overvoltage categoryOVC II(DC), OVC III(AC) Dimensions (WxHxD mm)456×750×268.5 (without connectors and brackets) Weight (kg)51.9 Cooling modeIntelligent cooling Guarantee5-year/10-year warranty period depends on the installation conditions of the inverter. Details can be found in the general warranty conditions Mains regulationIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE guideline R25, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2  FAQs about the Deye Sun three-phase hybrid inverterWhich battery types are supported?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range from 40 to 60V.Can I operate several devices in parallel?Yes, up to 10 units can be operated in parallel, making the inverter ideal for larger systems.What is the maximum charging and discharging current?The maximum charging and discharging current is 350A each, which enables fast energy transfer.What is the standby consumption of the device?The Deye SUN-20K-SG05LP3-EU-SM2 has a self-consumption of ≤ 60 W.Does the 20 kW inverter fit on an 18 kWp system or do I have to oversize/undersize?Yes, the Deye SUN 20K-SG05LP3-EU-SM2 is technically optimised for an 18 kWp system. It does not necessarily have to be oversized or undersized. With a DC/AC ratio of around 0.9, it is exactly in the ideal range (0.9 - 1.1 is recommended). This means that the system is even slightly undersized, but this has practically no disadvantages and at the same time offers scope for retrofitting additional modules at a later date. Scope of delivery: Deye SUN-20K-SG05LP3-EU-SM2 (20 kW LV hybrid inverter) 1 x Deye SUN-20K-SG05LP3-EU-SM2 inverterAn extremely powerful three-phase hybrid inverter with 20 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA solid metal mounting rail for securely fastening the appliance to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x current transformer (CT)External hinged current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and plugs)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x operating instructions (user manual)A printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-12K-SG05LP3-EU-SM2 is a three-phase hybrid inverter for residential and commercial energy projects. It combines an inverter, battery charger and energy management system in one device, enabling efficient, flexible energy flow control in new installations and retrofits.Highlights at a glanceSupports both lead-acid and lithium-ion batteries for various storage optionsBattery voltage range from 40 to 60 volts for flexible application possibilitiesMaximum charging and discharging current of 240 amperes for fast energy absorption and releaseMaximum PV input power of 18,000 watts enables high-performance solar systemsTwo independent MPPT inputs for maximum energy yield even with different module orientationsUnbalanced output power with up to 50 percent of the rated power per phase for flexible load distributionEfficient energy conversion for modern requirementsThe Deye SUN-12K-SG05LP3-EU-SM2 achieves a maximum efficiency of 97.6 percent and boasts an MPPT efficiency of over 99 percent. The wide MPPT voltage range of 200 to 650 volts, in conjunction with a maximum PV input voltage of 800 volts, ensures efficient energy capture even under varying irradiation conditions. This high efficiency ensures economical operation and maximum yields from the solar system.Flexibility and scalabilityThe Deye SUN-12K-SG05LP3-EU-SM2 can be flexibly adapted to different requirements. Thanks to the ability to operate up to ten devices in parallel, it is suitable for both smaller systems and large energy projects. The AC coupling allows easy integration into existing systems, making the inverter also ideal for retrofitting. Support for various battery types enables tailor-made storage solutions matched to individual needs and budgets.Reliability and protectionWith an IP65 protection rating, the inverter is optimally protected against dust and water, and is suitable for demanding environmental conditions. The wide operating temperature range from minus 40 to plus 60 degrees Celsius ensures safe operation even under extreme climatic conditions. Comprehensive protection mechanisms such as overcurrent, overvoltage, short-circuit and thermal protection, as well as DC insulation impedance monitoring, provide maximum operational safety and a long system lifespan.Who is the Deye SUN-12K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forHomeowners who want to increase their self-consumption quota and reduce energy costsCommercial enterprises that require a stable and efficient power supplyUsers who want to expand existing solar systems with modern storage solutionsProjects in regions with fluctuating grid stability, where diesel generators are used as an additional energy source  ModelDEYE SUN 12K-SG05LP3-EU-SM2 Battery input data Battery typeLi-lon Battery voltage range (V)40~60 Max. charging current (A)240 Max. discharging current (A)240 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adjustment to BMS PV string input data Max. DC input power (W)18000 Nominal PV input voltage (V)550 Start voltage (V)160 MPP voltage range (V)200-650 Max. DC input voltage (V)800 PV input current (A)26+26 Max. PV short-circuit current (A)39+39 Number of MPPT2 Strings per MPPT2+2 AC output data AC rated power and UPS power (W)12000 Max. AC output power (W)13200 AC rated output current (A)18.2/17.4 Max. rated AC output current (A)20/19.2 Max. continuous AC running (A)45 Peak power (without grid)2 times rated power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) DC feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection SafeguardsDC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, Thermal Protection, AC OutputSurge Protection, AC Output Short Circuit Protection, DC Component Monitoring, Overvoltage Load Protection,Earth Fault Current Monitoring, Arc Fault Circuit Interrupter (optional), Grid Monitoring,Island Protection Monitoring, Earth Fault Detection, DC Input Switch, DC IsolationImpedance Monitoring, Residual Current Detection (RCD), Surge Protection Level Surge categoryDC Type II/AC Type III Certifications and standards Grid approvalsIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G98, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN; RS232 Weight (kg)35,2 Size (mm)386B×660H×250 D Protection classIP65 Installation styleWall bracket Warranty10 years  FAQs on the 10 kW Deye Hybrid InverterWhat types of batteries does the inverter support?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range of 40 to 60 volts.What is the maximum charging and discharging current?The maximum charging and discharging current is 240 amperes, which enables fast energy transfer.Can the inverter be operated with a diesel generator?Yes, the Deye SUN-12K-SG05LP3-EU-SM2 supports the integration of diesel generators for a safe and uninterrupted power supply.Which communication interfaces are available?The inverter offers interfaces such as RS485, RS232, CAN as well as options for GPRS, Wi-Fi, Bluetooth, 4G and LAN for monitoring and control.Can the inverter supply unbalanced loads?Yes, the inverter can supply an unbalanced load of up to 100 percent, with each phase being able to deliver up to 50 percent of the rated power. Scope of delivery: Deye SUN-12K-SG05LP3-EU-SM2 three-phase hybrid inverter 12KW 1 x Deye SUN-12K-SG04LP3-EU-SM2 inverterA three-phase hybrid inverter with 12 kW output, integrated LCD touchscreen and support for 48V low-voltage battery systems.1 x wall mount bracketA robust metal mounting rail for securely attaching the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A pluggable communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman App.3 x current transformers (CT - Current Transformer)External clamp current transformers for measuring energy flows at the house connection, necessary for zero feed-in and optimising self-consumption.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) to connect the PV strings to the inverter.1 x communication cable (BMS)A pre-tethered RJ45 data cable for connecting between the inverter and battery management system.1 x mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for correct installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-15K-SG05LP3-EU-SM2 is a high-performance three-phase hybrid inverter developed for demanding photovoltaic systems in both commercial and private sectors. With a charging and discharging capacity of up to 350 A, support for various battery types and versatile application options, it is a reliable solution for modern energy systems.Highlights at a glanceHigh performance: 15 kW rated power for medium to large PV systemsFlexible battery application: Compatible with 48 V lithium-ion and lead-acid batteriesPowerful charge and discharge current: Up to 280A for rapid energy storageParallel operation: Operation of up to 10 devices possible, on-grid and off-gridDiesel generator compatible: Support for external power sourcesEfficient energy conversion for modern requirementsThe Deye SUN-15K-SG05LP3-EU-SM2 enables a high self-consumption rate through intelligent battery management, flexible PV feed-in and versatile communication interfaces. With a maximum efficiency of 97.6 percent and MPPT efficiency of over 99 percent, the system operates extremely efficiently and is energy-optimised.Flexible integration and retrofittingWhether as part of a new photovoltaic system or to expand existing systems, thanks to AC coupling and parallel operation, the SUN-15K is highly versatile. The combination with up to 10 inverters and various battery types allows scalable storage solutions and maximum system availability.Intelligent grid and island operationThe inverter supports operation on the public grid as well as self-sufficient island operation. Integrated communication via RS485, CAN, Wi-Fi, GPRS or LAN (optional) allows for easy integration into monitoring and control systems. The protection functions and IP65 protection class guarantee maximum operational safety.Who is the Deye SUN-15K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for:PV systems in commercial or private sectors with moderate energy demandSystems operated in parallel with the grid or independentlyProjects requiring maximum flexibility and reliabilityExisting systems to be modernised via AC coupling  ModelSUN-15K-SG05LP3-EU-SM2 Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60V Max. charging current (A)280A Max. discharging current (A)280A Charging strategy for Li-ion batterySelf-adaptation to BMS Number of battery inputs2 PV string input data Max. DC input power (W)22500W Max. DC input voltage (V)800V Starting voltage (V)160V MPPT voltage range (V)160V-650V Nominal DC input voltage (V)550V Max. operational PV input current (A)36+36A Max. input short-circuit current (A)54+54A Number of MPP trackers/number of strings per MPP tracker2/2+2 AC input/output side Rated AC input/output active power15000 Max. AC input/output apparent power16500 AC input/output rated current (A)22.8/21.8 Max. AC input/output current (A)25/24 Max. continuous AC passthrough (Grid for charging)70 Peak performance (off-grid)2x rated output power, 10s Power factor adjustment range0.8 leading to 0.8 lagging Rated input/output voltage/range (V)220/380V, 230/400V 0.85Un-1.1Un Rated input/output grid frequency/range(Hz)50/45-55, 60/55-65 Form of grid connection3L+N+PE Total harmonic current distortion (THDi)<3% ( rated power ) DC current feed-in<0,5% In Efficiency Max. efficiency97,6% Euro efficiency97,0% MPPT efficiency>99% Device protection IntegratedDC reverse polarity protection, AC output overcurrent protection, AC output overvoltage protection, AC output short-circuit protection, thermal protection, DC terminal insulation resistance monitoring, DC component monitoring, ground fault current monitoring, grid monitoring, islanding protection, ground fault detection, overvoltage load shedding protection, residual current monitoring (RCD), overvoltage category Surge protection levelTYPE II(DC), TYPE II(AC) Interface Communication interfaceRS485/RS232/CAN Monitor modeGPRS/WIFI/Bluetooth/4G/LAN (optional) General data Operating temperature range (℃)-40 to +60°C, >45°C power reduction Permissible ambient humidity0-100% Permissible altitude3000m Noise (dB)<60 dB(A) Protection classIP 65 Inverter topologyNon-isolated Overvoltage categoryOVC II(DC), OVC III(AC) Dimensions (WxHxD mm)456×750×268.5 (Without connectors and brackets) Weight (kg)50.6 Cooling methodIntelligent cooling Warranty5-year/10-year warranty period depends on the installation conditions of the inverter. For details, please refer to the general terms and conditions of warranty Grid regulationIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2  FAQs about the Deye SUN-15K-SG05LP3-EU-SM2Which battery systems are compatible?It supports low voltage batteries with a voltage of 40–60 V, both lithium-ion and lead-acid. Communication takes place intelligently via BMS protocols. The maximum charging and discharging current is up to 280 A.How efficient is this inverter?The maximum efficiency is 97.6%, the EU efficiency is 97.0%, which means very low losses.How many MPPTs and strings does it support?It has two MPP trackers, each of which can be connected to up to two PV strings (2 strings per MPPT).Can I operate several devices in parallel?Yes, up to 10 devices can be operated in parallel in on-grid or off-grid mode to flexibly scale system performance and capacity.What protection features are integrated?It is protected to IP65 and therefore protected against dust and water jets. In addition, it features comprehensive protection functions against DC reverse polarity, overcurrent, overvoltage, short circuit, earth faults and arc faults (“AFCI”). Scope of delivery: Deye SUN-15K-SG05LP3-EU-SM2 Three-phase Hybrid Inverter 15 kW 1 x Deye SUN-15K-SG05LP3-EU-SM2 inverterThe three-phase hybrid inverter with 15 kW output, integrated LCD colour touchscreen and support for 48V batteries.1 x wall mount bracketA robust metal rail for secure mounting of the device to a wall of sufficient load-bearing capacity.1 x Wi-Fi stick (data logger)A plug-in module for integrating the inverter into the local Wi-Fi network for monitoring via Deye Cloud or Solarman App.3 x current transformers (CT - Current Transformer)Split-core current transformers for measuring the energy flows at the house connection, necessary for functions such as zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The corresponding pairs of connectors (plus and minus) for connecting the photovoltaic strings to the DC inputs.1 x communication cable (BMS)A pre-assembled RJ45 cable for data connection between the inverter and the battery management system of the storage unit.1 x mounting kitIncludes the necessary stainless steel screws and heavy-duty dowels for the correct installation of the wall bracket.1 x User ManualA printed manual with technical specifications, wiring diagrams, installation instructions and safety advice.

The Deye SUN-25K-SG01HP3-EU-AM2 is a high-performance, three-phase hybrid inverter with high-voltage battery compatibility. It has been specially developed for demanding PV applications in residential and commercial environments and impresses with its high efficiency, flexible application options, and robust construction.Highlights at a glanceHigh rated power: 25 kW for high-performance PV systems in residential and commercial environments.AC and DC coupling: Enables the retrofitting of existing solar systems and the flexible integration of battery storage.High efficiency: A maximum efficiency of 97.6% and an MPPT efficiency of over 99% ensure maximum energy yield.Scalable: Up to 10 units can be connected in parallel for on-grid and off-grid operation, enabling flexible system extension.Intelligent monitoring: Smart functions enable remote monitoring and maintenance, including remote parameter adjustment and firmware updates.Comprehensive safety: Equipped with various protective mechanisms, including overvoltage, overcurrent, and earth fault protection.Efficient energy conversion with high-voltage technologyWith a maximum DC input power of 32,500 W and an MPPT efficiency of 99.9%, the SUN-25K achieves outstanding performance. The intelligent MPPT control ensures high yields even in cases of shading or unevenly aligned module fields. The inverter is optimised for high-voltage lithium-ion batteries (160–700 V), which enables particularly high charging and discharging efficiency.Flexibility and scalabilityWhether grid-connected, hybrid, or off-grid: the inverter offers flexible application options. The AC and DC coupling enables the simple retrofitting of existing solar installations. The parallel connection of up to 10 devices, as well as two separate battery inputs, provide scalable solutions for increasing energy demands. With six freely definable time slots for charging and discharging the battery, energy can be used or stored in a targeted way. Reliability and protectionThanks to protection class IP65 and intelligent cooling, operation is ensured even under demanding conditions. Safety features such as polarity reversal, overvoltage, short-circuit and residual current protection provide maximum operational safety. Certifications according to VDE-AR-N 4105, EN 50549 and other international standards confirm the high quality of the device. Who is the Deye SUN-25K-SG01HP3-EU-AM2 suitable for? This inverter is ideal for:Commercial enterprises with high energy and storage requirementsHomeowners seeking maximum self-sufficiency with high-voltage technologyInstallers planning flexible, future-proof systemsProject developers implementing AC-coupled retrofit solutions  ModelDEYE SUN 25K-SG01 HP3-EU-AM2 Battery input data Battery typeLi-lon Battery voltage range (V)160~700 Max. charging current (A)50 Max. discharging current (A)50 Number of battery inputs1 Charging strategy for Li-Ion batterySelf-adjustment to BMS PV string input data Max. DC input power (W)32500 Rated PV input voltage (V)1000 Starting voltage (V)180 MPP voltage range (V)150-850 Full load DC voltage range (V)500-850 Rated DC input voltage (V)700 PV input current (A)26+26 Max. PV short-circuit current (A)39+39 Number of MPPT2 Strings per MPPT2+2 AC output data AC rated power and UPS power (W)25000 Max. AC output power (W)27500 AC rated output current (A)37,9 /36,3 Max. rated AC output current (A)41,7 / 39,9 Max. continuous AC pass-through (A)80 Peak power (without grid)1,5x rated power, 10 s Generator input/Intelligent load/AC coupling current (A)30,4 / 80 / 30,4 Output power factor0,8 leading to 0,8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) Direct current injection<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection ProtectionsAnti-islanding protection, reverse polarity protection on PV string input, insulation resistance detection, differential current monitoring unit, output overcurrent protection, output short-circuit protection, output overvoltage protection Overvoltage categoryDC Type II/AC Type III Certifications and standards Grid approvalsVDE4105 IEC61727/62116 VDE0126 AS4777.2 CEI 0 21 EN50549-1 G98 G99 C10-11 UNE217002 NBR16149/NBR16150 Safety EMC/StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C output reduction CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN Weight (kg)30.5 Size (mm)408B×638H×237T（Without connectors and brackets） Degree of protectionIP65 Installation styleWall mounting Warranty10 years  FAQs about the Deye SUN-25K-SG01HP3-EU-AM2Which grid codes are stored in the inverter?The inverter contains all standard grid codes, which can be set directly in the “Setting → Grid” menu. These include VDE-AR-N 4105 for Germany, EN 50549 for the EU, and CEI 0-21 for Italy, among others. As a rule, no additional NA protection is necessary once the correct country profile has been activated.Which high-voltage storage solutions are compatible and how do I set the BMS correctly?The approved storage solutions include BYD HVS and HVM, Pylontech Force H1 and H2, Dyness Tower, and the Deye GB-L Series, among others. Each storage is assigned a specific setup number, which is selected in the menu “Battery → Lithium → Setup Number”. Alternatively, the same number can be set using the DIP switches on the battery. As manufacturers may change this at any time, it is recommended to check with a current compatibility list beforehand.How much PV power can I connect without the inverter clipping?According to the data sheet, up to 32,500 W DC input power is permitted, while the AC output power is 25 kW. This gives a DC/AC ratio of 1.3. In practice, a ratio of 1.1 to 1.2 is recommended, which corresponds to about 27.5 to 30 kWp.How loud is the inverter in operation?In standby mode, the inverter remains almost silent, as the fans only start when required. In normal operation, the noise level is below 55 decibels, as specified by the manufacturer. The device is therefore suitable for cellars and technical rooms.Can settings and firmware updates be made via the app?Yes, all settings can be controlled remotely via the Deye Cloud or the SUN-APP. This includes changes to charging and export parameters, firmware updates for the inverter, BMS and HMI, as well as possible emergency shutdown of the unit. The connection is made via Wi-Fi, LAN, or the factory hotspot network. Scope of delivery: Deye SUN-25K-SG01HP3-EU-AM2 (25 kW HV hybrid inverter) 1 x Deye SUN-25K-SG01HP3-EU-AM2 inverterAn extremely powerful three-phase high-voltage hybrid inverter with 25 kW output, integrated LCD touchscreen and three MPPT trackers for demanding photovoltaic systems.1 x wall mount bracketA reinforced metal mounting rail for safe mounting of the heavy industrial device on a load-bearing wall.1 x Wi-Fi stick (data logger)A pluggable communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman App.3 x current transformers (CT - Current Transformer)External clip-on current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and optimising self-consumption.1 x set of PV connectors (MC4-compatible)The necessary pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x set of battery connection plugs (high voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage unit.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connection between the inverter and the battery management system.1 x mounting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for the professional installation of the wall mount.1 x User ManualA printed manual with detailed installation instructions, circuit diagrams, and safety instructions.

The Deye SUN-6K-SG05LP1-EU is a state-of-the-art and powerful single-phase hybrid inverter that functions as an intelligent hub for larger photovoltaic systems. It has been developed to offer you maximum independence, efficiency, and security of supply. With a high output power of 6 kW, it manages the energy flows between your solar panels, the battery storage and the public power grid. Thanks to its integrated emergency power function, you are reliably supplied with high performance even in the event of a power failure.Highlights at a glanceIntelligent hybrid system: Manages PV generation, battery storage and mains consumption for maximum self-consumption.High performance: With 6 kW output, ideal for larger households, heat pumps or small businesses.Integrated emergency power supply: Provides uninterrupted power supply (UPS level) during mains failure.Two MPP trackers: Enables connection of two independent module fields, ideal for east-west roofs or partial shading.Flexible battery connection: Compatible with a wide range of 48V low-voltage batteries.Comprehensive monitoring: Integrated Wi-Fi module for simple and intuitive system monitoring via app.Smart energy management for your homeThe Deye hybrid inverter is more than just a converter from DC to AC. It is the brain of your energy supply. During the day, it supplies your loads directly with solar power, while surplus energy is stored in your battery for use at night or on cloudy days. Only when the storage is full and no load needs electricity is the energy fed into the public grid. This way, you maximise your self-consumption and significantly reduce your electricity costs.Maximum yields through flexible PV connectionThanks to the two integrated MPP trackers (Maximum Power Point), the Deye SUN-6K offers maximum flexibility in planning your PV system. You can connect two separate module strings with different orientations (e.g. east and west sides of the roof) or with different module types. Each tracker optimises the output of its string individually, so you always achieve the maximum possible energy yield, even in complex roof situations or partial shading.Independence through integrated emergency power supplyA special feature of this inverter is the integrated emergency power function. In the event of a failure of the public power grid, the device switches to a separate emergency power output in less than 10 milliseconds and continues to supply selected critical loads such as lighting, refrigerator or IT infrastructure with power from the battery storage. This UPS-level (Uninterruptible Power Supply) switching time ensures maximum supply reliability. Features  ModelDeye SUN-6K-SG05LP1-EU Battery input data Battery typeLead-acid or Li-ion Battery voltage range (V)40~60 Max. charging current (A)140 Max. discharging current (A)140 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)9600 Nominal PV input voltage (V)370 Starting voltage (V)80 MPP voltage range (V)125-425 Max. DC input voltage (V)550 PV input current (A)13+22 Max. PV short-circuit current (A)17+28.6 Number of MPPT2 Strings per MPPT1+2 AC output data AC nominal power and UPS power (W)6000 Max. AC output power (W)6600 AC output nominal current (A)27.3 Maximum AC output nominal current (A)30 Max. continuous AC throughput (A)40 Peak power (without grid)2 times nominal power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Total harmonic distortion (THD)< 3% ( nominal power ) Direct current feed<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97,00% MPPT efficiency>99% Protection FusesIntegrated lightning protection, anti-islanding, reverse polarity protection, short circuit protection, overload protection, and much more. Surge categoryDC Type II/AC Type II Certifications and standards Grid approvalsVDE4105, IEC61727/62116, VDE0126, EN50549-1, CEI 0-21, AS4777, NRS2017, G98, G99, etc. Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range ( ℃ )-45~60°C, >45° C power derating CoolingIntelligent cooling Noise (dB)<30 dB Communication with BMSRS485; CAN Weight (kg)15 Size (mm)330B×580H×232T Degree of protectionIP65 Installation styleWall mount Warranty10 years  FAQs about the Deye SUN-6K-SG05LP1-EU hybrid inverterWhat exactly does "hybrid inverter" mean?A hybrid inverter can manage energy from several sources at the same time. It acts as the interface between the solar panels, the battery storage and the public power grid. It intelligently decides whether the solar power generated is used directly, stored in the battery or fed into the grid.Who is a 6 kW inverter suitable for?A 6 kW inverter is ideal for larger detached houses with higher electricity consumption, for example due to use of a heat pump or an electric vehicle. It is also suitable for small businesses or agricultural operations that want to optimise their own consumption.Which batteries are compatible with this inverter?The Deye SUN-6K is designed for use with 48V low-voltage (LV) lithium-ion battery storage systems. It is compatible with many leading manufacturers. The full compatibility list can be found on the manufacturer's website.Do I need any additional devices for the emergency power function?The inverter has an integrated emergency power output (EPS port). For use, the emergency loads to be supplied must be placed on a separate circuit by a qualified electrician and connected to this output. An additional external transfer switch is generally not required. Scope of delivery: Deye SUN-6K-SG05LP1-EU (6 kW Single-Phase Hybrid Inverter) 1 x Deye SUN-6K-SG05LP1-EU inverterA high-performance single-phase hybrid inverter with 6 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA robust metal mounting rail for secure installation of the device on a load-bearing wall.1 x Wi-Fi Stick (Data Logger)A plug-in communication module for connecting to the Internet for remote monitoring via Deye Cloud or Solarman App.1 x Current Transformer (CT)An external split current transformer for measuring energy flows at the property connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The necessary pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x Communication Cable (BMS)A pre-assembled RJ45 data cable for connection between the inverter and the battery management system.1 x Installation Kit (Screws and Plugs)A set of stainless steel screws and heavy-duty wall plugs for professional installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, wiring diagrams and important safety information.

The Felicity FLS48100SMG1 battery module from the renowned FLS Series is a powerful, stackable low-voltage lithium iron phosphate battery (LiFePO₄) with a capacity of 5.12 kWh. Thanks to its intelligent, space-saving design and modular expandability, the system is ideal for use in private households, commercial facilities and emergency power systems.Highlights at a glanceReliable capacity: 5.12 kWh per module for effective energy storageHigh scalability: Up to 8 modules operable in parallel (40.96 kWh)Flexible installation: Wall or floor-mountable, stackable designIntelligent safety: Integrated BMS, fuse, and circuit breakerLong-lasting: ≥ 6000 charge cycles at 90% depth of discharge (DoD)Efficient energy storage for private and commercial applicationsWith a nominal voltage of 51.2 V and 100 Ah capacity, the Felicity battery module is suitable for various application areas, from single-family homes to industrial emergency power supply. The high efficiency and modular expandability make the system particularly cost-effective.Flexibility and easy expansionThe clever, stackable design allows rapid expansion to up to 8 modules with up to 40.96 kWh total capacity. Thanks to the plug-and-play principle and simple handling, integration into existing systems is especially straightforward.Safety and reliabilityThe Felicity FLS series uses high-quality LiFePO₄ cells, which are known for their high thermal stability and long service life. The integrated battery management system (BMS) reliably protects against overcharging, deep discharge, short circuit, and overtemperature.Who is the Felicity battery module suitable for?This battery pack is ideal for: Homeowners wishing to increase their self-consumption ratio Commercial businesses seeking to manage peak loads or operate autonomously PV installers in need of flexible and scalable storage solutions Industrial users who depend on stable emergency power solutions ModelFLS48100SMG1 Battery typeLiFePO4 Module Capacity (kWh)5.12 Module Nominal Voltage (V)51.2 Module Capacity (Ah)100 System Nominal Voltage (V)51.2 System Operating Voltage (V)44.8-57.6 System Capacity (kWh)5.12 System Usable Capacity (kWh)4.6 Charge/discharge current (A) - Recommendation50 Charge/discharge current (A) - Nominal value60 Charge/discharge current (A) - Peak discharge (2 min,25°C)100 Operating temperature (°C)Charging: 0 ~ 55 / Discharging: -20 ~ 55 DisplayControl Module: LCD/Battery Module: LED Communication connectionCAN, RS485 Humidity5% ~ 95% Altitude≤2000m IP rating of the housingIP65 Storage temperature (°C)0 ~ 35 Dimensions (W/D/H, mm)600 * 450 * 180 Weight (kg)46 Installation locationFloor mounting / Wall mounting Recommended depth of discharge90% Cycle life25 ± 2°C, 0.5C/0.5C, EOL70% ≥ 6000 Warranty10 years CertificationsSee downloads / sales enquiry  FAQs about the Felicity battery storageWhich inverters are compatible with the Felicity 5.12 kWh low-voltage module?The module is compatible with many 48 V inverters, including models from Deye, Growatt, Victron, Solis, Sofar, MPP Solar and Felicity itself. It is not compatible with high voltage inverters such as Huawei SUN2000 or Kostal Plenticore Plus.Can I expand the storage capacity with additional modules?Yes, the Felicity module is modular. Depending on the model, up to 8 or even 15 modules can be combined, enabling a total capacity of up to 40.96 kWh.What safety functions does the module offer?The module has an integrated battery management system (BMS) that continuously monitors voltage and temperature. Additionally, it offers protection mechanisms such as overvoltage protection up to 6000 V and an aerosol fire extinguishing system.Is the module maintenance-free and how is it installed?Yes, the module is maintenance-free. It is designed for wall mounting and weighs between 51 and 92 kg, depending on version. Installation can be carried out by one person.Is there a possibility to monitor the battery status?Yes, the module provides integrated WiFi monitoring for real-time monitoring of charge status, temperature, and other parameters. Scope of delivery Felicity FLS48100SMG1 battery module (5.12 kWh slave unit): Module typeThis is a pure expansion module (slave unit) for an existing Felicity tower system. It requires a master module (control module) for operation.1 x Felicity FLS48100SMG1 slave battery module (5.12 kWh)A pure expansion battery module with 5.12 kWh (100 Ah) without its own higher-level control unit.1 x connecting bridge / parallel connection cableShort, robust cables or a fixed bridge to connect this module to an existing master or slave module.1 x earthing cableA short protective conductor cable to connect with the earthing point of the neighbouring module.1 x mounting accessories (rack/tower mounting)Typically includes screws or clamps to safely stack the module on top of another.1 x operating and installation manualA printed manual describing the expansion of an existing tower system.

With the JA Solar 460W glass-glass Full Black module JAM54D41 LR you get a high-performance N-type double-glass solar module with an output of 460 Wp. The module combines modern cell technology with high efficiency and an elegant full-black design. The robust glass-glass construction ensures high mechanical stability, increased resistance to environmental influences and a long service life. Thanks to low degradation and a 30-year linear performance warranty, the module is ideal for long-lasting PV projects in both residential and commercial settings. The DEEPBLUE 4.0 Pro technology used also ensures a particularly high energy yield, even in low-light conditions. Yes Solar 460W Full Black JAM54D41 LR Product features Power: 460-watt glass-glass module with up to 23.0% efficiency Technology: N-type mono cells (DEEPBLUE 4.0 Pro) with very low LID and high long-term performance Construction: Robust glass-to-glass construction for increased stability and weather resistance Appearance: Full black design for high-quality, seamless roof integration Connection: IP68 junction box, integrated connection cables with MC4-EVO2A connectors Compatibility: Compatible with all standard inverters, mounting systems and PV components Warranty: 25-year product warranty and 30-year linear performance warranty  SpecificationsValue Cell typeN-type mono (monofacial) Pmax (Peak power)460 W VOC40.60 V Vmp33.68 V Isc14.43 A Imp13.66 A Efficiency23,0 % Temperature coefficient Isc+0.045% / °C Temperature coefficient Voc−0.260 % / °C Temperature coefficient Pmax−0.290 % / °C Maximum system voltage1500 V DC Operating temperature-40 °C to +85 °C Max. strand protection25 A Dimensions1762 × 1134 × 30 mm Weight22 kg Load capacity5400 Pa (front) / 2400 Pa (rear)

The OLIGHT Oclip Pro is an extremely compact, versatile and rechargeable LED light designed as a flexible tool for everyday professional use. It offers powerful and wide illumination for close range as well as a switchable red light for special applications. Thanks to its innovative mounting system with a robust clip and a strong magnetic base, the Oclip Pro enables hands-free working in almost any situation. It is the ideal additional light for technicians, logistics personnel and security staff.Highlights at a glanceFlexible attachment: Strong clip for fastening to clothing, caps, belts and equipment.Magnetic base: Attaches securely to all magnetic surfaces for hands-free working.Additional red light: Switchable to red continuous light (night vision) or flashing light (warning signal).Powerful white light: Up to 500 lumens for bright and wide illumination of the work area.Compact and rechargeable: Lightweight, robust design with practical USB-C charging port.Powerful in a variety of professional applicationsThe Oclip Pro was developed for situations where both hands must remain free for work. Industrial and service technicians attach it magnetically inside switch cabinets or on machines to precisely illuminate maintenance work. Logistics and warehouse staff clip it to their vests to read delivery notes or barcodes in the dark without having to hold a hand lamp. Security and rescue services use the white light for documentation or the red flashing light as a personal safety and warning signal to be clearly visible in operation.Thoughtful design for everyday professional useThe heart of the Oclip Pro is its multifunctional clip. It is not only used for attachment, but also protects the USB-C charging port from dust and moisture. The strong magnetic base of the clip transforms any metallic surface into a lamp holder. The housing is made from a lightweight yet resilient aluminium alloy and plastic to withstand the demands of everyday use and is splash-proof to IPX5 standard.Versatile light modes for every taskThe Oclip Pro offers different, easily selectable light levels for the white main light to provide the right brightness for every task. The additional red light is a crucial feature for professional users. The red steady mode preserves the eyes' natural night vision and is ideal for reading maps or instruments in the dark. The red flashing mode serves as a highly visible emergency signal or for marking your own position in poor visibility conditions. Features  ModelOLight Oclip Pro Product typeMobile LED small lamp Max. light output (lumens)400 Max. lighting range (metres)85 Additional light colourRed light (steady / flashing) Power supplyIntegrated battery (400 mAh Li-Po) Charging typeUSB-C WaterproofIPX5 Housing materialAluminium alloy Dimensions (L/W/H, mm)55 x 47 x 22 Weight (g)approx. 57 Special featuresClip and strong magnetic base  FAQs about the OLight Oclip ProHow do you switch between white and red light?Hold the switch for one second when the light is on. The light then switches seamlessly between the white and red light mode.For which professional activities is the magnetic base particularly useful?The magnetic base is ideal for all work on metallic objects. Car mechanics can attach the light to the bonnet, electricians inside control boxes, and plant mechanics directly to the machine that needs maintenance.What is the red flashing light used for?The red flashing light serves as a personal warning and safety signal. It increases the visibility of staff during night operations, for example during roadworks, on company premises or during rescue work, and can be used as an emergency signal.How can I check the battery status of the light?The Oclip Pro has a battery charge level indicator. Briefly press the switch once in the off state. A green indicator signals a battery level above 10%, a red indicator signals a level below 10%.Is the clip robust enough for everyday use?Yes, the clip is made of resilient metal and features a strong spring to ensure a secure hold on thicker work clothing, belts, or equipment.