Deye SUN-12K-SG05LP3-EU-SM2 Three-phase hybrid inverter 12KW

The Deye SE-G5.1Pro-B is a high-performance battery module with a storage capacity of 5.12 kWh, based on safe lithium iron phosphate (LiFePO4) technology. With its modular design, support for high-current applications and flexibility in installation, it is the ideal solution for modern energy storage systems in both domestic and commercial settings.Highlights at a glanceSafe & durable: Cobalt-free LiFePO₄ cells with intelligent BMS Modular and scalable: Up to 64 modules – max. 327 kWh storage capacity High compatibility: Suitable for wall mounting, floor mounting & 19" rack Easy maintenance: Automatic networking, remote monitoring & USB firmware updates Reliable operation: IP20, natural cooling, wide temperature range down to -20 °CCompact, scalable & intelligently networkedWith an individual capacity of 5.12 kWh, the Deye SE-G5.1Pro-B is ideal for smaller storage solutions or as a component in large-scale modular storage systems. Thanks to the ability to connect up to 64 units in parallel, a maximum total capacity of 327 kWh is achievable. Perfect for applications with growing energy requirements. Automatic network addressing and support for firmware updates via USB or remote access significantly simplify commissioning and maintenance.Flexible mounting – space-saving & easy to installThanks to three mounting options—rack mounting (19-inch), wall mounting or floor installation—the module can be optimally positioned in almost any environment. With its compact design, measuring just 133 mm in height, it saves valuable space in technical rooms or living areas.Who is the Deye SE-G5.1Pro-B suitable for?Private households looking for a safe and sustainable storage system Commercial enterprises requiring scalable storage solutions for self-consumption or backup System integrators & installers who value easy integration and low maintenance Sustainability-minded users who rely on environmentally friendly storage technology ModelDEYSE-G5.1 Pro-B Battery typeLiFePO4 Module capacity (kWh)5.12 Module nominal voltage (V)51.2 Module capacity (Ah)100 System nominal voltage (V)51.2 System operating voltage (V)43.2-57.6 System capacity (kWh)5.12 System Usable Capacity (kWh)4.6 Charging/discharging current (A) - Recommendation50 Charging/discharging current (A) - rated value100 Charging/discharging current (A) - Peak discharge (2 min,25°C)150 Operating temperature (°C)Charging: 0 ~ 55 / Discharging: -20 ~ 60 LCD displaySOC%, Power, Total Voltage Communication portCAN2.0, RS485 Humidity5% ~ 90% Altitude≤2000m IP rating of the enclosureIP65 Storage temperature (°C)0 ~ 35 Dimensions (W/D/H, mm)440 * 133 * 540 Weight (kg)45 Installation locationFloor mounting, rack mounting Recommended discharge depth90% Cycle life25 ± 2°C, 0.5C/0.5C, EOL70% ≥ 6000 Warranty10 years CertificationsUN38.3, IEC62619, CE, UK, VDE2510-50, CEI 0-21, FCC, UL1973, UL9540A  FAQs on the Deye SE-G5.1Pro-B battery storage systemHow much energy is actually usable?One module provides 5.12 kWh gross capacity, of which approximately 4.6 kWh is usable at a 90% depth of discharge; particularly suitable for residential and commercial applications.What are the applicable voltages and currents per module?The module operates at a nominal voltage of 51.2 V and has a capacity of 100 Ah. The continuous current is 50 A, with a peak current of up to 150 A possible for 10 seconds.How many modules can be combined?In the IP20 version, up to 64 modules can be connected in parallel, corresponding to a total capacity of over 327 kWh. Common in domestic applications: six modules per tower, i.e. 30.7 kWh per unit.What is the module's lifespan?The cells achieve over 6,000 cycles at 90% DoD, with a residual capacity of at least 70% at end of life, meaning they are designed for long-term use.Which Deye inverters is the system compatible with?The battery is officially approved for all three-phase hybrid inverters in the SUN-xK-HP3 and SUN-xK-BM series and is fully plug-and-play compatible without the need for additional adjustments. We strongly recommend checking the compatibility list, as the manufacturer may make changes. Contents of delivery Deye SE-G5.1Pro-B rack battery module (5.12 kWh): Module typeThis is a a single, flexible low-voltage battery module for installation in 19-inch racks, wall mounting or floor-standing.1 x Deye SE-G5.1Pro-B battery module (5.12 kWh)The central storage unit with 5.12 kWh (100 Ah) in rack format, including an intelligent, integrated battery management system (BMS).1 x set of mounting handles / rack earsHandles for easier handling and for securing the module in a 19-inch server rack.1 x set of battery connection cables (positive & negative)A pair of pre-assembled high-performance cables for connecting the module (or battery stack) to a compatible hybrid inverter.1 x communication cable (CAN/RS485)A data cable for communication between the battery module and the inverter.1 x parallel connection cable (power & communication)Short cables to connect this module’s power and data bus to another module.1 x earthing cableA protective earth cable for the correct earthing of the housing.1 x User and Installation GuideA printed manual describing the various installation types (rack, wall, stacking).2 x wall bracketsFor wall mounting the battery pack 4 x feetFor stacking and securing the battery

The Deye SE-F16 is a high-capacity low-voltage energy storage system (51.2 V) designed for demanding use in residential and commercial photovoltaic systems. With an enormous rated capacity of 16 kWh (314 Ah) in just one compact housing module, this storage system significantly minimises the space required and the installation effort.This model uses the proven and intrinsically safe lithium iron phosphate (LiFePO4) cell chemistry. Combined with the intelligent Battery Management System (BMS) and a wide range of monitoring options (including Bluetooth), the SE-F16 offers maximum safety, scalability and longevity for the self-sufficient energy supply of your home or business.Highlights at a glanceMassive storage capacity (16 kWh): With a rated capacity of 314 Ah at 51.2 V, this single module provides enough energy to reliably supply large households even during prolonged periods of low sunlight.Safe LiFePO4 cell chemistry: The lithium iron phosphate technology guarantees maximum thermal stability and virtually eliminates the risk of thermal runaway (fire hazard).Powerful power handling: The system supports an enormous continuous discharge current of up to 230 A and peak currents of 280 A (for 10 seconds), ideal for power-hungry large loads such as heat pumps or wallboxes.Extreme scalability: For even greater energy requirements, up to 32 units can be connected in parallel as standard. With a CAN bridge, scaling up to 64 modules is even possible.Smart monitoring & connectivity: In addition to CAN2.0 and RS485, the storage system features Bluetooth for convenient monitoring via smartphone app. The "C" version (SE-F16-C) also has an integrated LCD display.Longevity & efficiency: Certified for over 6,000 charge cycles (at 25°C), ensuring decades of reliable operating life in daily use.Flexible installation: Despite the high weight, the housing system is extremely flexible and can be installed either on the wall, floor-standing or stacked.ApplicationsThe Deye SE-F16 is the perfect solution for demanding energy scenarios:Single-family and multi-family houses: Maximises self-consumption of PV power and, in combination with a hybrid inverter, provides a powerful emergency power supply for the entire building.Commercial applications (C&I): Used to cap expensive peak loads (peak shaving) and stores large PV surpluses in agricultural or commercial businesses.Off-grid & stand-alone systems: Thanks to its gigantic capacity and high continuous discharge power, it offers a reliable energy source for completely off-grid properties.Installation & safety instructionsLogistics and weight: At a weight of 109 kg, the module is extremely heavy. Installation should обязательно be carried out with suitable lifting equipment (stair climber) or by at least two to three people.Choice of location: The storage system must be installed in a dry and ideally frost-free room (protection class IP21). Charging at temperatures below 0°C is automatically blocked by the BMS to protect the cells.Cable cross-sections: Due to the extremely high currents (up to 230 A continuous load), the connection cables to the inverter or busbar must have a cross-section of at least 70 mm², preferably 95 mm², in order to avoid overheating and voltage losses.Commissioning with parallel connection: If you connect several SE-F16 modules together, all units must be charged to exactly the same voltage level before cabling in order to prevent dangerous equalisation currents. Features  ModelDeye SE-F16 (C series with display) Technology**LiFePO4** (lithium iron phosphate) Rated voltage**51.2 V** (operating range: 44.8 V - 57.6 V) Rated capacity**314 Ah** Nominal energy**16.0 kWh** Max. continuous current**230 A** (peak current 280 A for 10s) Cycle life**≥ 6000 cycles** (at 90% DOD and 25°C) CommunicationCAN 2.0 / RS485 / Bluetooth + app (incl. LCD display) Dimensions (W x D x H)approx. 400 x 233 x 708 mm Weightapprox. **109 kg** Mounting typeFloor mounting, wall mounting or stacked  H2: FAQs about the Deye SE-F16What is the difference between the SE-F16 and the SE-F12?The main difference lies in the capacity and the housing height. The SE-F16 delivers 16 kWh (314 Ah) and weighs around 109 kg, while the SE-F12 11.8 kWh (230 Ah) offers and weighs approx. 84 kg. Both use the same 51.2V architecture and are designed for identical applications, but the F16 offers significantly more autonomy per installed module.What does the "C" in the designation SE-F16-C mean?The suffix "-C" in Deye storage systems indicates the extended model variant which, in addition to Bluetooth monitoring, is also equipped with an integrated LCD display on the front of the housing. This allows the current state of charge (SoC), cell voltages and warning messages to be read directly on the device without having to open the app.Do I absolutely need a Deye inverter for this battery?No, but it is strongly recommended for smooth operation. The SE-F16 is "Plug & Play" compatible with Deye low-voltage hybrid inverters (such as the SG04 series), since the BMS protocol matches natively. With third-party brands (such as Victron, SMA or Solis), communication must first be configured manually via DIP switches or software settings. It is strongly recommended to check the compatibility list, as changes may occur on the manufacturer side.

The Deye AI-W5.1-B energy storage system with a capacity of 10.24 kWh offers a powerful, safe and future-proof solution for the efficient use of renewable energy. Thanks to its modular, stackable design, the system is suitable for both domestic and commercial applications. With robust LiFePO₄ technology, wireless plug-&-play installation and intelligent control, the storage system ensures maximum flexibility and long-term reliability.Highlights at a glance10.24 kWh rated capacity, of which 9.2 kWh is usable (2 modules of 5.12 kWh each, 90 % DoD) Wireless, pluggable stack installation without screws or wiring Cobalt-free LiFePO₄ cells, ≥ 6000 charge cycles (EOL 70 %) IP65 protection, natural convection cooling, -20 °C to +55 °C operating temperature Auto-networking, remote monitoring, firmware upgradesCompact. Flexible. Secure.The Deye AI-W5.1-B is designed to grow with your energy needs. The system can be expanded in stacks of up to 6 modules (30.72 kWh) and can be connected in parallel in up to 6 clusters,  for a total capacity of up to 184 kWh. The clever plug-&-play connection makes installation quick, safe and cost-effective, all without external cables or screws.Intelligent energy managementEach module is equipped with a high-precision battery management system (BMS) that intelligently controls charging and discharging processes, protects the cells and maximises service life. Remote monitoring, automatic addressing and wireless communication ensure easy system integration and high transparency during operation.Robust technology for all conditionsThanks to its IP65-certified housing, the storage system is protected against dust and splash water and is suitable for indoor areas such as basements, utility rooms and protected outdoor areas. Operation is possible even at temperatures from -20 °C to +55 °C. The wireless design with natural convection cooling makes the storage system silent, maintenance-free and durable.Who is the Deye AI-W5.1-B energy storage system suitable for?This battery system is ideal for: Private households that want to store surplus solar energy efficiently Commercial businesses that want to absorb peak loads or operate independently of the grid Installers who want to offer a modular, easily expandable storage system Hybrid or off-grid applications where a reliable energy supply is crucial Sustainability-conscious users who value pollutant-free, durable technology ModelDEYAI-W10.2-B Battery typeLiFePO4 Module capacity (kWh)5.12 Module nominal voltage (V)51.2 Module capacity (Ah)100 System nominal voltage (V)51.2 System operating voltage (V)44.8-57.6 System capacity (kWh)10.24 System usable capacity (kWh)9.2 Charge/discharge current (A) - Recommendation100 Charge/discharge current (A) - Rated value200 Charge/discharge current (A) - Peak discharge (2 min,25°C)270 Operating temperature (°C)Charging: 0 ~ 55 / Discharging: -20 ~ 60 LCD displaySOC%, Power, Total Voltage Communication connectionCAN2.0, RS485 Humidity5% ~ 90% Altitude≤2000m IP protection class of the housingIP65 Storage temperature (°C)0 ~ 35 Dimensions (W/D/H, mm)720 * 255 * 831 Weight (kg)127.5 Installation locationFloor mounting Recommended depth of discharge90% Cycle life25 ± 2°C, 0.5C/0.5C, EOL70% ≥ 6000 Warranty10 years CertificationsCE/IEC62619 /VDE2510-50/ UL1973/UL9540A/UN38.3  FAQs about the Deye AI-W5.1-B battery storage systemCan I expand the storage system to 15 or 30 kWh later?Yes, up to six modules can be combined per tower, resulting in a total capacity of 30.7 kWh per stack. By connecting up to six towers in parallel, flexible scaling to significantly higher capacities is possible.How many cycles does the battery last?According to the datasheet, the storage system achieves over 6,000 charge cycles at 90 % depth of discharge (DoD). This makes the system suitable for long-term use with consistently high performance and reliability.Which inverters is the 10 kWh package compatible with?The system is officially approved for Deye hybrid inverters in the low-voltage series. The communication and operating parameters are matched to each other at the factory. “Plug-&-play” operation is possible without further configuration. A comparison with the compatibility list is recommended.Can I also operate the storage system with other inverters?There is no official approval from Deye for other inverters. Use with third-party devices is therefore at your own risk and without any guarantee of functionality.Does the battery need to be fully charged before initial commissioning?Yes, the manual recommends an initial charge to 100 % to ensure correct synchronisation of the state of charge (SoC). If this step is skipped, deviations in the SoC values and inaccurate capacity display may occur. If solar energy is not sufficient for the first full charge, the storage system can also be charged via the grid. Scope of delivery Deye AI-W5.1-B modular low-voltage battery system (10.24 kWh): System compositionThis product is a set and consists of three separate main components, which together form a 10.24 kWh tower system.Component 1: Deye AI-W5.1-B-BMS (control unit & base)The central control unit (BMS Cluster) that manages the entire system. This unit forms the base of the battery tower.Component 2 & 3: Two Deye AI-W5.1-BATT battery modules (5.12 kWh each)Two pure battery modules with 5.12 kWh each, which are stacked on the BMS unit.1 x set of battery connection cables (positive & negative)A pair of high-performance cables for connecting the BMS unit to an external hybrid inverter.1 x communication cable (CAN/RS485)A data cable for communication between the BMS and the inverter.1 x connection bridge / parallel connection cableShort, robust cables or a fixed bridge to connect the two battery modules to each other.1 x earthing cableA protective conductor cable for correct earthing of the BMS unit.1 x installation accessories (tower assembly)Includes screws or locking elements to securely connect the three components into a tower.1 x operating and installation manualA printed manual describing the installation of the entire tower system.

The Felicity Solar FLA 48460TG2-EU is a giant among home storage systems. With an enormous capacity of 23.5 kWh in a single housing, this 48V block redefines what a powerful all-in-one storage system can achieve. Instead of many small modules, you get a massive energy storage unit for maximum autonomy. This floor-mounted solution is based on safe LiFePO4 technology and is aimed at large PV systems, multi-family houses or commercial use. The TG2 version also offers modern features such as integrated WiFi/Bluetooth for real-time monitoring and an aerosol fire extinguishing system. Highlights at a glanceGigantic capacity (23.5 kWh / 460 Ah): A single block stores an extremely large amount of energy and reduces space requirements, wiring and installation effort. High performance (up to 12.5 kW): Designed for 250A continuous charge/discharge current and 500A peak (15s) – ideal for high loads and powerful hybrid systems. Monitoring integrated (WiFi/Bluetooth): Real-time monitoring of status, performance and system data directly via wireless connection. LiFePO4 cell chemistry: Lithium iron phosphate is considered particularly thermally stable and safe for stationary storage systems. Safety setup: Integrated Smart-BMS as well as breaker & fuse; additionally aerosol fire extinguishing system. External fuse (easy replacement): The external fuse design allows for service-friendly replacement. Scalable up to 15 units: Parallel connection of up to 15 storage units (up to 352.5 kWh) for large systems. Long service life: Designed for ≥ 6000 cycles (Test condition: 25°C ±2°C, 0.5C/0.5C, 90% DoD, 70% EOL). Areas of applicationThe FLA 48460TG2-EU is the solution for power users and large consumers: Maximum autonomy: More energy at home, less grid consumption – even in bad weather.Commercial & multi-family houses: High capacity and power reserve for demanding load profiles.Backup systems: High continuous output for emergency/back-up power scenarios (note system design).Scalable storage parks: Up to 15 units in parallel for very large capacities.Installation & safety instructionsLogistics & weight: Product weight approx. 186.5 kg (packaging weight approx. 220 kg). Delivery is typically on a pallet/forwarding agent. Suitable lifting/transport equipment must be planned for bringing in. Installation location: Floor-mounted. The surface must be level and load-bearing. Dimensions: 570 x 250 x 980 mm (W x D x H). Cable cross-section: For possible currents up to 250A, large cross-sections are usual. Please design the cross-section/protection according to standards, cable length and manufacturer specifications. Properties ModelFelicity Solar FLA 48460TG2-EU TechnologyLiFePO4 (Lithium iron phosphate) Nominal voltage51.2 V Energy content23.5 kWh Operating voltage44.8 – 57.6 V Max. continuous current (charge/discharge)250 A (depends on temperature & SOC) Peak current (15s)500 A Max. charge/discharge power12,500 W Depth of discharge (DoD)≥ 95% CommunicationRS485 / CAN Protection typeIP21 Cycles lifetime≥ 6000 (25°C ±2°C, 0.5C/0.5C, 90% DoD, 70% EOL) Temperature range charging0°C to +55°C Temperature range discharging-20°C to +55°C DisplayLCD + LED MountingFloor-mounted (Floor-Mounted) Protection / ComponentsSmart BMS, Breaker, Fuse (integrated) Warranty10 years CertificationUN38.3 Weight186.5 kg (product) / 220 kg (packed) Dimensions (W x D x H)570 x 250 x 980 mm FAQs for the Felicity FLA 48460TG2-EUHow long does it take to charge this battery?That depends on the available charging power of your inverter. With high charging power, the storage unit can be filled very quickly: At up to 12.5 kW (theoretical maximum), in practice this often corresponds to around about 2 hours for a full charge – depending on SOC, temperature and system limitations. Can I connect two of them in parallel?Yes. The storage unit is designed for parallel connection. With two units you get approx. 47 kWh capacity. In total, up to 15 units are possible in parallel (up to 352.5 kWh). How does the battery communicate with the inverter?Via CAN or RS485. Please check the compatibility and the necessary pin assignment/protocol selection in the documentation of your inverter.  Scope of delivery: Felicity Solar FLA 48460TG2-EU (23.5 kWh LV battery storage) 1 x Felicity Solar FLA 48460TG2-EU battery moduleA massive upright 51.2V LiFePO4 energy storage with a high capacity of 460 Ah (23.55 kWh) and integrated battery management system (BMS).1 x set of DC power cables (power cable)A pair of high-current cables (plus and minus) for electrical connection of the storage unit to the low-voltage inverter.1 x BMS communication cableA pre-assembled data cable (RJ45) for communication between the battery and the inverter via CAN or RS485 interface.1 x earthing cableA yellow-green protective earthing cable for safe earthing of the robust metal housing.1 x wall mounting set / anti-tilt deviceSpecial mounting accessories for attachment of the housing to a stable wall to prevent the heavy storage unit from tipping over.1 x mounting kit (screws and accessories)All required small parts, screws and connectors for professional mechanical and electrical installation.1 x user manual (User Manual)A technical manual with detailed installation instructions, pin assignments for communication and safety instructions.

The Felicity Solar FLA48230-EU is a powerful lithium iron phosphate (LiFePO4) home storage system in the low-voltage range (48V). With an impressive capacity of 11.8 kWh in a single housing, this model is aimed at homeowners who want to realise a large storage capacity in a small space and with minimal cabling.In contrast to modular systems, where you often have to stack two to three modules for 10-12 kWh, the FLA48230-EU offers this energy in a single, wall-mountable block. It is particularly popular in combination with Deye, Growatt or Victron inverters and is characterised by an excellent price-performance ratio.Highlights at a glanceMassive capacity (11.8 kWh): Offers 230 Ah at 51.2 V in a single device. This drastically reduces the installation effort, as fewer cable bridges and connections are required than with small storage systems.Safe LiFePO4 technology: Utilises lithium iron phosphate cells which are considered thermally stable, intrinsically safe (no thermal runaway) and extremely durable.Integrated display & BMS: A front-mounted LCD display shows SOC (state of charge), voltage and cell status. The BMS protects against overcharging, deep discharge and overheating.Space-saving wall mounting: The slimline design enables flat wall mounting (similar to a radiator), saving valuable floor space in the plant room.High cycle stability: Designed for >6000 cycles (at 80% DOD / 25°C). This corresponds to a service life of over 15 years with daily use.Wide compatibility: Has CAN and RS485 interfaces and is compatible with the market leaders in the 48V segment (Deye, Victron, GoodWe, Growatt, SMA via CAN box).Built-in DC isolator switch: Often has an integrated circuit breaker on the side to safely and quickly disconnect the battery from the system.Areas of applicationThe FLA48230-EU is ideal for medium to large households:Self-consumption optimisation: Stores enough energy to power households with heat pumps or electric cars through the night.Emergency power supply (backup): In combination with hybrid inverters (e.g. Deye 12K), the storage system can supply the entire house in the event of a grid failure.Off-grid systems: Popular for self-sufficient holiday homes due to its robust design and high capacity.Technology & Advantages"All-in-one" advantage: Instead of wiring three 4kWh blocks (sources of error, contact resistances, space requirements), you only install one unit here. The BMS only has to balance one large cell block, which is often more efficient.Scalability: Despite its size, the system is expandable. Up to 12 or 15 units (depending on the firmware) can be connected in parallel to build storage systems in the three-digit kWh range.Ease of maintenance: The connections are easily accessible and the display allows diagnostics without a laptop/PC.Installation & safety instructionsWeight warning: With over 100 kg this storage system is extremely heavy. The wall bracket must be anchored in load-bearing masonry (concrete/brick). Installation on plasterboard walls is not possible without solid reinforcement. Use a pallet truck or lift for installation.Cable cross-section: Due to the high currents (up to 120A), battery cables with at least 35mm², better 50mm² can be used to minimise voltage drops.DIP switch: When communicating with the inverter (esp. Deye/Victron), the DIP switches on the communication port must be set correctly to define the BMS protocol. Characteristics ModelFelicity Solar FLA48230-EU Technology**LiFePO4** (Lithium Iron Phosphate) - Safe & Durable Nominal voltage**51.2 V** (standard low voltage system) Capacity**230 Ah** Energy content**11.77 kWh** (Marketed as ~11.8 kWh) Usable energy (DOD)approx. 90% - 95% (depending on inverter setting) Lifespan**≥ 6000 cycles** (at 25°C, 80% DOD) Communication**CAN / RS485** (Compatible with Deye, Growatt, etc.) Mounting**Wall mounting** (bracket included) or stand Weightapprox. **100 - 105 kg** (Attention: Very heavy!) Dimensions (H x W x D in mm)approx. 900 x 675 x 200 (flat design)  FAQs for the Felicity FLA48230-EUDoes this battery work with the Deye SUN-12K-SG04LP3?Yes, excellent. This is one of the most common combinations. The battery is connected via CAN bus. In the Deye inverter, you usually select "Lithium Mode" and the protocol "00" (or "12" for Felicity, depending on the firmware), and the system automatically recognises the 230Ah.Can I retrofit two of these batteries later?Yes. You can connect several FLA48230s in parallel. One battery is configured as the "master" (DIP switch 1 ON) and the others as "slaves". Important: The batteries should have the same voltage (same state of charge) when they are connected in order to avoid high equalising currents.Why is "EU" in the name?The "EU" model is specifically certified for the European market (CE, UN38.3, MSDS) and complies with the applicable safety standards. The instructions and support are often also orientated towards European dealers. Scope of delivery: Felicity Solar FLA48230-EU (11.8 kWh LV battery storage) 1 x Felicity Solar FLA48230-EU battery moduleA standing 51.2V LiFePO4 energy storage system with a capacity of 230 Ah (11.77 kWh) and integrated battery management system (BMS).1 x set of DC power cables (power cable)A pair of high-current-resistant cables (plus and minus) for the electrical connection of the storage system to the low-voltage inverter.1 x BMS communication cableA pre-assembled data cable (RJ45) for communication between the battery and the inverter via CAN or RS485 interface.1 x earthing cableA yellow-green protective earthing cable for safe earthing of the battery housing.1 x wall mounting set / anti-tilt deviceMounting accessories for fixing the housing to the wall to prevent the upright storage system from tipping over.1 x mounting kit (screws and accessories)All small parts and screws required for installation and electrical connections.1 x User manualA technical manual with installation instructions, pin assignments for various inverters and safety instructions.