Deye SE-F16-C – Advanced energy storage system with 16 kWh (LiFePO4)

The Deye SUN-12K-SG05LP3-EU-SM2 is a three-phase hybrid inverter for residential and commercial energy projects. It combines an inverter, battery charger and energy management system in one device, enabling efficient, flexible energy flow control in new installations and retrofits.Highlights at a glanceSupports both lead-acid and lithium-ion batteries for various storage optionsBattery voltage range from 40 to 60 volts for flexible application possibilitiesMaximum charging and discharging current of 240 amperes for fast energy absorption and releaseMaximum PV input power of 18,000 watts enables high-performance solar systemsTwo independent MPPT inputs for maximum energy yield even with different module orientationsUnbalanced output power with up to 50 percent of the rated power per phase for flexible load distributionEfficient energy conversion for modern requirementsThe Deye SUN-12K-SG05LP3-EU-SM2 achieves a maximum efficiency of 97.6 percent and boasts an MPPT efficiency of over 99 percent. The wide MPPT voltage range of 200 to 650 volts, in conjunction with a maximum PV input voltage of 800 volts, ensures efficient energy capture even under varying irradiation conditions. This high efficiency ensures economical operation and maximum yields from the solar system.Flexibility and scalabilityThe Deye SUN-12K-SG05LP3-EU-SM2 can be flexibly adapted to different requirements. Thanks to the ability to operate up to ten devices in parallel, it is suitable for both smaller systems and large energy projects. The AC coupling allows easy integration into existing systems, making the inverter also ideal for retrofitting. Support for various battery types enables tailor-made storage solutions matched to individual needs and budgets.Reliability and protectionWith an IP65 protection rating, the inverter is optimally protected against dust and water, and is suitable for demanding environmental conditions. The wide operating temperature range from minus 40 to plus 60 degrees Celsius ensures safe operation even under extreme climatic conditions. Comprehensive protection mechanisms such as overcurrent, overvoltage, short-circuit and thermal protection, as well as DC insulation impedance monitoring, provide maximum operational safety and a long system lifespan.Who is the Deye SUN-12K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forHomeowners who want to increase their self-consumption quota and reduce energy costsCommercial enterprises that require a stable and efficient power supplyUsers who want to expand existing solar systems with modern storage solutionsProjects in regions with fluctuating grid stability, where diesel generators are used as an additional energy source  ModelDEYE SUN 12K-SG05LP3-EU-SM2 Battery input data Battery typeLi-lon Battery voltage range (V)40~60 Max. charging current (A)240 Max. discharging current (A)240 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adjustment to BMS PV string input data Max. DC input power (W)18000 Nominal PV input voltage (V)550 Start voltage (V)160 MPP voltage range (V)200-650 Max. DC input voltage (V)800 PV input current (A)26+26 Max. PV short-circuit current (A)39+39 Number of MPPT2 Strings per MPPT2+2 AC output data AC rated power and UPS power (W)12000 Max. AC output power (W)13200 AC rated output current (A)18.2/17.4 Max. rated AC output current (A)20/19.2 Max. continuous AC running (A)45 Peak power (without grid)2 times rated power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) DC feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection SafeguardsDC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, Thermal Protection, AC OutputSurge Protection, AC Output Short Circuit Protection, DC Component Monitoring, Overvoltage Load Protection,Earth Fault Current Monitoring, Arc Fault Circuit Interrupter (optional), Grid Monitoring,Island Protection Monitoring, Earth Fault Detection, DC Input Switch, DC IsolationImpedance Monitoring, Residual Current Detection (RCD), Surge Protection Level Surge categoryDC Type II/AC Type III Certifications and standards Grid approvalsIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G98, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN; RS232 Weight (kg)35,2 Size (mm)386B×660H×250 D Protection classIP65 Installation styleWall bracket Warranty10 years  FAQs on the 10 kW Deye Hybrid InverterWhat types of batteries does the inverter support?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range of 40 to 60 volts.What is the maximum charging and discharging current?The maximum charging and discharging current is 240 amperes, which enables fast energy transfer.Can the inverter be operated with a diesel generator?Yes, the Deye SUN-12K-SG05LP3-EU-SM2 supports the integration of diesel generators for a safe and uninterrupted power supply.Which communication interfaces are available?The inverter offers interfaces such as RS485, RS232, CAN as well as options for GPRS, Wi-Fi, Bluetooth, 4G and LAN for monitoring and control.Can the inverter supply unbalanced loads?Yes, the inverter can supply an unbalanced load of up to 100 percent, with each phase being able to deliver up to 50 percent of the rated power. Scope of delivery: Deye SUN-12K-SG05LP3-EU-SM2 three-phase hybrid inverter 12KW 1 x Deye SUN-12K-SG04LP3-EU-SM2 inverterA three-phase hybrid inverter with 12 kW output, integrated LCD touchscreen and support for 48V low-voltage battery systems.1 x wall mount bracketA robust metal mounting rail for securely attaching the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A pluggable communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman App.3 x current transformers (CT - Current Transformer)External clamp current transformers for measuring energy flows at the house connection, necessary for zero feed-in and optimising self-consumption.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) to connect the PV strings to the inverter.1 x communication cable (BMS)A pre-tethered RJ45 data cable for connecting between the inverter and battery management system.1 x mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for correct installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-20K-SG05LP3-EU-SM2 offers a reliable and efficient solution for energy conversion in photovoltaic systems. With its high charging and discharging capacity and support for various battery types, it is ideal for demanding energy projects.Highlights at a glanceHigh performance: 20 kW rated output for high energy requirements Flexible battery selectionCompatible with lead-acid and lithium-ion batteries High charging/discharging current: Up to 350A for fast power transmission Expandable: Parallel connection of up to 10 devices possible Robust designIP65 protection class for use in various environments Efficient energy conversion for modern requirementsThe Deye SUN-20K-SG05LP3-EU-SM2 is specially designed to meet the requirements of modern photovoltaic systems. With its three-phase output power and support for 48V low-voltage batteries, it offers an efficient solution for energy conversion and storage.Flexibility and scalabilityThanks to the option of connecting up to 10 devices in parallel, the inverter can be flexibly adapted to different system sizes. The support of both lead-acid and lithium-ion batteries enables customised adaptation to specific energy requirements.Reliability and protectionWith a protection class of IP65, the inverter is protected against dust and water, ensuring reliable operation in different environments. The integrated protective functions ensure safe and stable operation of the system.Who is the Deye SUN-20K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for: Operators of larger solar systems who are looking for a flexible and safe storage solution Commercial enterprises that want to cover energy peaks or work off-grid Homeowners who want to maximise their self-consumption rate Users with diesel generator support who are aiming for maximum self-sufficiency  ModelSUN-20K-SG05LP3-EU-SM2 Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60V Max. Charging current (A)350A Max. Discharge current (A)350A Charging strategy for Li-ion batterySelf-adaptation to BMS Number of battery inputs2 Input data of the PV string Max. DC input power (W)32000W Max. DC input voltage (V)800V Starting voltage (V)160V MPPT voltage range (V)160V-650V Rated DC input voltage (V)550V Max. Operating PV input current (A)36+36A Max. Input short-circuit current (A)54+54A Number of MPP trackers/Number of MPP tracker strings2/2+2 AC input/output side Rated AC input/output effective power20000 Max. AC input/output apparent power22000 AC input/output rated current (A)30.4/29 Max. AC input/output current (A)33.4/31.9 Max. Continuous AC passthrough (mains for charging)70 Peak power (without mains)2x rated output power, 10s Setting range of the power factor0.8 leading to 0.8 trailing Nominal input/output voltage/range (V)220/380V, 230/400V 0.85Un-1.1Un Nominal input/output mains frequency/range(Hz)50/45-55, 60/55-65 Form of the mains connection3L+N+PE Total harmonic current distortion (THDi)<3% ( rated power ) DC current power supply<0.5% In Efficiency Max. Efficiency97,6% Euro efficiency97,0% MPPT efficiency>99% Protection of the devices IntegratedDC reverse polarity protection, AC output overcurrent protection, AC output overvoltage protection, AC output short-circuit protection, thermal protection, DC terminal insulation impedance monitoring, DC component monitoring, earth fault current monitoring, power grid monitoring, protection against islanding, earth fault detection, overvoltage load shedding protection, residual current monitoring (RCD), overvoltage category Overvoltage protection levelTYPE II(DC), TYPE II(AC) Interface Communication interfaceRS485/RS232/CAN Monitor modeGPRS/WIFI/Bluetooth/4G/LAN (optional) General data Operating temperature range (℃)-40 to +60°C, >45°C power reduction Permissible ambient humidity0-100% Permissible height3000m Noise (dB)<60 dB(A) Protection classIP 65 Inverter topologyNon-insulated Overvoltage categoryOVC II(DC), OVC III(AC) Dimensions (WxHxD mm)456×750×268.5 (without connectors and brackets) Weight (kg)51.9 Cooling modeIntelligent cooling Guarantee5-year/10-year warranty period depends on the installation conditions of the inverter. Details can be found in the general warranty conditions Mains regulationIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE guideline R25, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2  FAQs about the Deye Sun three-phase hybrid inverterWhich battery types are supported?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range from 40 to 60V.Can I operate several devices in parallel?Yes, up to 10 units can be operated in parallel, making the inverter ideal for larger systems.What is the maximum charging and discharging current?The maximum charging and discharging current is 350A each, which enables fast energy transfer.What is the standby consumption of the device?The Deye SUN-20K-SG05LP3-EU-SM2 has a self-consumption of ≤ 60 W.Does the 20 kW inverter fit on an 18 kWp system or do I have to oversize/undersize?Yes, the Deye SUN 20K-SG05LP3-EU-SM2 is technically optimised for an 18 kWp system. It does not necessarily have to be oversized or undersized. With a DC/AC ratio of around 0.9, it is exactly in the ideal range (0.9 - 1.1 is recommended). This means that the system is even slightly undersized, but this has practically no disadvantages and at the same time offers scope for retrofitting additional modules at a later date. Scope of delivery: Deye SUN-20K-SG05LP3-EU-SM2 (20 kW LV hybrid inverter) 1 x Deye SUN-20K-SG05LP3-EU-SM2 inverterAn extremely powerful three-phase hybrid inverter with 20 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA solid metal mounting rail for securely fastening the appliance to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman app.3 x current transformer (CT)External hinged current transformers for measuring the energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for the connection between the inverter and the battery management system.1 x mounting set (screws and plugs)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall bracket.1 x operating instructions (user manual)A printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-15K-SG05LP3-EU-SM2 is a high-performance three-phase hybrid inverter developed for demanding photovoltaic systems in both commercial and private sectors. With a charging and discharging capacity of up to 350 A, support for various battery types and versatile application options, it is a reliable solution for modern energy systems.Highlights at a glanceHigh performance: 15 kW rated power for medium to large PV systemsFlexible battery application: Compatible with 48 V lithium-ion and lead-acid batteriesPowerful charge and discharge current: Up to 280A for rapid energy storageParallel operation: Operation of up to 10 devices possible, on-grid and off-gridDiesel generator compatible: Support for external power sourcesEfficient energy conversion for modern requirementsThe Deye SUN-15K-SG05LP3-EU-SM2 enables a high self-consumption rate through intelligent battery management, flexible PV feed-in and versatile communication interfaces. With a maximum efficiency of 97.6 percent and MPPT efficiency of over 99 percent, the system operates extremely efficiently and is energy-optimised.Flexible integration and retrofittingWhether as part of a new photovoltaic system or to expand existing systems, thanks to AC coupling and parallel operation, the SUN-15K is highly versatile. The combination with up to 10 inverters and various battery types allows scalable storage solutions and maximum system availability.Intelligent grid and island operationThe inverter supports operation on the public grid as well as self-sufficient island operation. Integrated communication via RS485, CAN, Wi-Fi, GPRS or LAN (optional) allows for easy integration into monitoring and control systems. The protection functions and IP65 protection class guarantee maximum operational safety.Who is the Deye SUN-15K-SG05LP3-EU-SM2 suitable for?This inverter is ideal for:PV systems in commercial or private sectors with moderate energy demandSystems operated in parallel with the grid or independentlyProjects requiring maximum flexibility and reliabilityExisting systems to be modernised via AC coupling  ModelSUN-15K-SG05LP3-EU-SM2 Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60V Max. charging current (A)280A Max. discharging current (A)280A Charging strategy for Li-ion batterySelf-adaptation to BMS Number of battery inputs2 PV string input data Max. DC input power (W)22500W Max. DC input voltage (V)800V Starting voltage (V)160V MPPT voltage range (V)160V-650V Nominal DC input voltage (V)550V Max. operational PV input current (A)36+36A Max. input short-circuit current (A)54+54A Number of MPP trackers/number of strings per MPP tracker2/2+2 AC input/output side Rated AC input/output active power15000 Max. AC input/output apparent power16500 AC input/output rated current (A)22.8/21.8 Max. AC input/output current (A)25/24 Max. continuous AC passthrough (Grid for charging)70 Peak performance (off-grid)2x rated output power, 10s Power factor adjustment range0.8 leading to 0.8 lagging Rated input/output voltage/range (V)220/380V, 230/400V 0.85Un-1.1Un Rated input/output grid frequency/range(Hz)50/45-55, 60/55-65 Form of grid connection3L+N+PE Total harmonic current distortion (THDi)<3% ( rated power ) DC current feed-in<0,5% In Efficiency Max. efficiency97,6% Euro efficiency97,0% MPPT efficiency>99% Device protection IntegratedDC reverse polarity protection, AC output overcurrent protection, AC output overvoltage protection, AC output short-circuit protection, thermal protection, DC terminal insulation resistance monitoring, DC component monitoring, ground fault current monitoring, grid monitoring, islanding protection, ground fault detection, overvoltage load shedding protection, residual current monitoring (RCD), overvoltage category Surge protection levelTYPE II(DC), TYPE II(AC) Interface Communication interfaceRS485/RS232/CAN Monitor modeGPRS/WIFI/Bluetooth/4G/LAN (optional) General data Operating temperature range (℃)-40 to +60°C, >45°C power reduction Permissible ambient humidity0-100% Permissible altitude3000m Noise (dB)<60 dB(A) Protection classIP 65 Inverter topologyNon-isolated Overvoltage categoryOVC II(DC), OVC III(AC) Dimensions (WxHxD mm)456×750×268.5 (Without connectors and brackets) Weight (kg)50.6 Cooling methodIntelligent cooling Warranty5-year/10-year warranty period depends on the installation conditions of the inverter. For details, please refer to the general terms and conditions of warranty Grid regulationIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2  FAQs about the Deye SUN-15K-SG05LP3-EU-SM2Which battery systems are compatible?It supports low voltage batteries with a voltage of 40–60 V, both lithium-ion and lead-acid. Communication takes place intelligently via BMS protocols. The maximum charging and discharging current is up to 280 A.How efficient is this inverter?The maximum efficiency is 97.6%, the EU efficiency is 97.0%, which means very low losses.How many MPPTs and strings does it support?It has two MPP trackers, each of which can be connected to up to two PV strings (2 strings per MPPT).Can I operate several devices in parallel?Yes, up to 10 devices can be operated in parallel in on-grid or off-grid mode to flexibly scale system performance and capacity.What protection features are integrated?It is protected to IP65 and therefore protected against dust and water jets. In addition, it features comprehensive protection functions against DC reverse polarity, overcurrent, overvoltage, short circuit, earth faults and arc faults (“AFCI”). Scope of delivery: Deye SUN-15K-SG05LP3-EU-SM2 Three-phase Hybrid Inverter 15 kW 1 x Deye SUN-15K-SG05LP3-EU-SM2 inverterThe three-phase hybrid inverter with 15 kW output, integrated LCD colour touchscreen and support for 48V batteries.1 x wall mount bracketA robust metal rail for secure mounting of the device to a wall of sufficient load-bearing capacity.1 x Wi-Fi stick (data logger)A plug-in module for integrating the inverter into the local Wi-Fi network for monitoring via Deye Cloud or Solarman App.3 x current transformers (CT - Current Transformer)Split-core current transformers for measuring the energy flows at the house connection, necessary for functions such as zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The corresponding pairs of connectors (plus and minus) for connecting the photovoltaic strings to the DC inputs.1 x communication cable (BMS)A pre-assembled RJ45 cable for data connection between the inverter and the battery management system of the storage unit.1 x mounting kitIncludes the necessary stainless steel screws and heavy-duty dowels for the correct installation of the wall bracket.1 x User ManualA printed manual with technical specifications, wiring diagrams, installation instructions and safety advice.

The Solar cable SOLS650 (50 metres, 6mm²) in black is the ideal cable by the metre for photovoltaic projects that demand the highest standards of efficiency and durability. With a length of 50 metres and a reinforced cross-section of 6mm², this cable provides perfect reserves for string cabling on house roofs or connecting distant module fields. The black colouring serves as a standard-compliant identification of the negative pole (-), which makes installation clear and minimises the risk of reversed polarity.Certified to the international standard IEC 62930, this cable meets the strictest requirements for use in modern PV systems up to 1500V DC. The generous cross-section ensures that even with high current from modern high-performance modules, the voltage drop is minimised and the total yield of your system is maximised.Highlights at a glanceMaximum efficiency: The 6mm² cross-section massively reduces electrical resistance and achieves minimal voltage drop, especially over distances of 50 metres.Certified safety: Complies with IEC 62930 standard (H1Z2Z2-K) for continuous use in photovoltaic DC systems up to 1500V.Optimum project length: 50 metres in one piece allow uninterrupted installation without additional connectors between the module field and inverter.Weather & UV resistant: The premium XLPO double insulation protects the cable for decades against embrittlement from sun, ozone and extreme weather conditions.Corrosion-protected conductor: Fine-stranded, tinned copper delivers best conductivity in the long run and effectively protects against oxidation, even in damp or salty environments.High thermal load capacity: Reliable operation in a wide temperature range from -40°C to +90°C.Areas of applicationThe SOLS650 is the ideal choice for demanding installation scenarios:Large roof systemsPerfect for connecting the solar modules to the inverter when this is installed in the basement or a distant technical room.High-performance balcony power plantsIdeal for systems with modern modules (500Wp+), to safely and losslessly transport the high currents.Island & battery storageExcellent for 24V or 48V systems where low voltage drops are crucial for optimal battery charging.Assembly & safety instructionsProfessional connectionFor assembly, use only high-quality MC4 connectors approved for 6mm² cross-sections. A precise crimp using a special solar crimping tool is essential.Mechanical fixingAttach the cable at regular intervals with UV-resistant cable ties to prevent mechanical stress due to wind or its own weight on the connections.Avoidance of induction loopsRoute the black negative cable as parallel and close as possible to the red positive cable to minimise electromagnetic interference fields and the risk of induction by lightning. Features Model / SKU**SOLS650** Conductor cross-section**6.0 mm²** Delivery form**50 metre ring** ColourBlack (negative pole) Rated voltageDC: 1.5 kV / Max. 1.8 kV Conductor materialCopper, tinned (class 5) Temperature range-40°C to +120°C (on the conductor) Certification**IEC 62930 / EN 50618** Special featureHalogen-free, UV-resistant & short-circuit-proof  FAQs about the solar cable black 50m 6mm²Why is 6mm² for 50 metres better than 4mm²?Because of the lower resistance.Over a distance of 50 metres, the electrical resistance adds up. With 6mm² you reduce the voltage drop by about a third compared to 4mm². This ensures higher system voltage at the inverter and thus measurably higher yield.Can the cable be laid freely outdoors?Yes.The cable is specially certified for permanent outdoor installation. It is resistant to UV light, ozone and ammonia, which also qualifies it for use in agriculture.Is the cable flame-retardant?Yes.The XLPO insulation is flame-retardant and halogen-free. In the event of fire, the cable hardly develops any smoke and no corrosive gases, which significantly increases building safety.

The Deye SUN-6K-SG05LP1-EU is a state-of-the-art and powerful single-phase hybrid inverter that functions as an intelligent hub for larger photovoltaic systems. It has been developed to offer you maximum independence, efficiency, and security of supply. With a high output power of 6 kW, it manages the energy flows between your solar panels, the battery storage and the public power grid. Thanks to its integrated emergency power function, you are reliably supplied with high performance even in the event of a power failure.Highlights at a glanceIntelligent hybrid system: Manages PV generation, battery storage and mains consumption for maximum self-consumption.High performance: With 6 kW output, ideal for larger households, heat pumps or small businesses.Integrated emergency power supply: Provides uninterrupted power supply (UPS level) during mains failure.Two MPP trackers: Enables connection of two independent module fields, ideal for east-west roofs or partial shading.Flexible battery connection: Compatible with a wide range of 48V low-voltage batteries.Comprehensive monitoring: Integrated Wi-Fi module for simple and intuitive system monitoring via app.Smart energy management for your homeThe Deye hybrid inverter is more than just a converter from DC to AC. It is the brain of your energy supply. During the day, it supplies your loads directly with solar power, while surplus energy is stored in your battery for use at night or on cloudy days. Only when the storage is full and no load needs electricity is the energy fed into the public grid. This way, you maximise your self-consumption and significantly reduce your electricity costs.Maximum yields through flexible PV connectionThanks to the two integrated MPP trackers (Maximum Power Point), the Deye SUN-6K offers maximum flexibility in planning your PV system. You can connect two separate module strings with different orientations (e.g. east and west sides of the roof) or with different module types. Each tracker optimises the output of its string individually, so you always achieve the maximum possible energy yield, even in complex roof situations or partial shading.Independence through integrated emergency power supplyA special feature of this inverter is the integrated emergency power function. In the event of a failure of the public power grid, the device switches to a separate emergency power output in less than 10 milliseconds and continues to supply selected critical loads such as lighting, refrigerator or IT infrastructure with power from the battery storage. This UPS-level (Uninterruptible Power Supply) switching time ensures maximum supply reliability. Features  ModelDeye SUN-6K-SG05LP1-EU Battery input data Battery typeLead-acid or Li-ion Battery voltage range (V)40~60 Max. charging current (A)140 Max. discharging current (A)140 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)9600 Nominal PV input voltage (V)370 Starting voltage (V)80 MPP voltage range (V)125-425 Max. DC input voltage (V)550 PV input current (A)13+22 Max. PV short-circuit current (A)17+28.6 Number of MPPT2 Strings per MPPT1+2 AC output data AC nominal power and UPS power (W)6000 Max. AC output power (W)6600 AC output nominal current (A)27.3 Maximum AC output nominal current (A)30 Max. continuous AC throughput (A)40 Peak power (without grid)2 times nominal power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Total harmonic distortion (THD)< 3% ( nominal power ) Direct current feed<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97,00% MPPT efficiency>99% Protection FusesIntegrated lightning protection, anti-islanding, reverse polarity protection, short circuit protection, overload protection, and much more. Surge categoryDC Type II/AC Type II Certifications and standards Grid approvalsVDE4105, IEC61727/62116, VDE0126, EN50549-1, CEI 0-21, AS4777, NRS2017, G98, G99, etc. Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range ( ℃ )-45~60°C, >45° C power derating CoolingIntelligent cooling Noise (dB)<30 dB Communication with BMSRS485; CAN Weight (kg)15 Size (mm)330B×580H×232T Degree of protectionIP65 Installation styleWall mount Warranty10 years  FAQs about the Deye SUN-6K-SG05LP1-EU hybrid inverterWhat exactly does "hybrid inverter" mean?A hybrid inverter can manage energy from several sources at the same time. It acts as the interface between the solar panels, the battery storage and the public power grid. It intelligently decides whether the solar power generated is used directly, stored in the battery or fed into the grid.Who is a 6 kW inverter suitable for?A 6 kW inverter is ideal for larger detached houses with higher electricity consumption, for example due to use of a heat pump or an electric vehicle. It is also suitable for small businesses or agricultural operations that want to optimise their own consumption.Which batteries are compatible with this inverter?The Deye SUN-6K is designed for use with 48V low-voltage (LV) lithium-ion battery storage systems. It is compatible with many leading manufacturers. The full compatibility list can be found on the manufacturer's website.Do I need any additional devices for the emergency power function?The inverter has an integrated emergency power output (EPS port). For use, the emergency loads to be supplied must be placed on a separate circuit by a qualified electrician and connected to this output. An additional external transfer switch is generally not required. Scope of delivery: Deye SUN-6K-SG05LP1-EU (6 kW Single-Phase Hybrid Inverter) 1 x Deye SUN-6K-SG05LP1-EU inverterA high-performance single-phase hybrid inverter with 6 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA robust metal mounting rail for secure installation of the device on a load-bearing wall.1 x Wi-Fi Stick (Data Logger)A plug-in communication module for connecting to the Internet for remote monitoring via Deye Cloud or Solarman App.1 x Current Transformer (CT)An external split current transformer for measuring energy flows at the property connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The necessary pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x Communication Cable (BMS)A pre-assembled RJ45 data cable for connection between the inverter and the battery management system.1 x Installation Kit (Screws and Plugs)A set of stainless steel screws and heavy-duty wall plugs for professional installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, wiring diagrams and important safety information.

The Eastron SDM630-M is a modern and multifunctional digital energy meter for three-phase networks, designed for comprehensive monitoring and analysis of electrical parameters. Thanks to its integrated Modbus RTU interface, it can be seamlessly integrated into building automation, energy management or photovoltaic monitoring systems. As a direct-measuring meter up to 100 amps per phase, it offers precise data acquisition for a wide range of applications in commercial, industrial and demanding private households.Highlights at a glancePrecise measurement: Reliably measures a wide range of electrical quantities (kWh, kvarh, kW, kvar, kVA, P, F, PF, Hz, dmd, V, A, THD).Modbus RTU interface: Enables simple remote reading and integration into higher-level systems via RS485.Multifunctional: Suitable for energy monitoring, cost centre billing, load management and PV system monitoring.Direct measuring up to 100A: No external current transformers required for currents up to 100A per phase, simplifies installation.Compact DIN rail format: Simple and space-saving installation in standard electrical distribution boards (4 modules wide).Comprehensive energy monitoring for professional applicationsThe Eastron SDM630-M is the ideal instrument for detailed recording of energy consumption and generation. It enables the precise monitoring of total consumption, individual machines or circuits as well as the recording of energy generated by a photovoltaic system. Thanks to the measurement of active and reactive energy in both directions (import/export), it is perfectly suited for monitoring PV systems with self-consumption. Its data forms the basis for energy efficiency measures, internal cost allocations or the monitoring of load profiles.Precise measurement and flexible integrationIn addition to active energy (kWh), this energy meter also measures reactive energy (kvarh), active power (kW), reactive power (kvar), apparent power (kVA), current (A), voltage (V), frequency (Hz), power factor (PF) and total harmonic distortion (THD) for voltage and current. The integrated Modbus RTU interface via RS485 enables all these values to be queried by systems such as data loggers, PLC controllers or energy management software. Direct measurement up to 100A eliminates the need for complex installation and configuration of external current transformers in many standard applications.Simple installation and operationThe SDM630-M is quick and easy to install on a standard DIN rail in electrical distribution boards. The large, illuminated LCD display enables the most important measured values to be read directly on site. The buttons on the front can be used to navigate intuitively through the various display menus in order to view all the recorded parameters or make basic settings. Features  ModelEastron SDM630-M Modbus ApplicationThree-phase energy meter MeasurementActive/reactive energy (kWh/kvarh),Voltage (V), current (A), power (W/VA/var),Power factor, frequency (Hz) Power supply types3-phase (3p4w, 3p3w), 1-phase (1p2w) Rated voltage (V)3x230/400 V AC Rated current (A)10(100) A (direct measurement) Accuracy classCl. 1 (active energy) / Cl. B (MID) InterfaceModbus RTU (RS485) MountingDIN rail (DIN rail) Dimensions (W x H x D in mm)72 x 100 x 66 (4 modules) Weight (g)approx. 300  FAQs about the Eastron SDM630-M energy meterWhat is the difference between the SDM630-M and other SDM630 variants?The "M" in the designation stands for the integrated Modbus RTU interface. There are also variants with pulse outputs (e.g. SDM630-V1/-V2), with M-Bus interface or as MID-calibrated versions for billing purposes (SDM630-Modbus-MID).Do I need external current transformers for this meter?No, this model is designed for Direct measurement of currents up to 100 amperes per phase. No external current transformers (CTs) are required as long as this current range is not exceeded. Special CT meters (e.g. SDM630MCT) are available for higher currents.Is this meter suitable for official billing (e.g. with the energy supplier)?No, this standard model is usually not MID-calibrated and must therefore not be used for billing to the nearest kilowatt hour. It is primarily intended for monitoring purposes and internal cost allocation. For billing purposes, you need a variant with MID approval (e.g. SDM630-Modbus-MID).How is the data read out via Modbus?To read out the data, you need a Modbus master (e.g. a data logger, a PLC, a Raspberry Pi or a PC with appropriate software and an RS485 interface). The master sends queries to the address of the meter in the RS485 network and reads the values from the defined Modbus registers. The register assignment can be found in the manual for the meter.