Skip to main content Skip to search Skip to main navigation
Menu

Wallboxes

8 Products
DEYSUN-EVSE22K01-EU-AC

Deye WALLBOX SUN-EVSE22K01-EU-AC 22 kW Smart EV Charger

The Deye SUN-EVSE22K01-EU-AC Smart Wallbox enables smart, safe and particularly efficient charging of electric and plug-in hybrid vehicles directly at home or in a commercial setting. With a charging power of up to 22 kW via a three-phase connection, it charges a compatible vehicle significantly faster than a conventional domestic socket.Thanks to its smart integration into existing Deye energy systems, the wallbox can be powered specifically using self-generated solar power. Various charging modes, control via the Deye Cloud app and modern communication interfaces make the SUN-EVSE22K01-EU-AC a flexible charging solution for efficient energy management.Your benefits at a glanceUp to 22 kW charging powerWith a three-phase connection, the Wallbox provides a charging power of up to 22 kW. In single-phase operation, up to 7 kW is possible. This allows compatible electric vehicles to be charged much faster than from a conventional socket.Smart app controlThe Deye Cloud App allows you to conveniently monitor and schedule charging sessions via your smartphone. This enables flexible management of charging times, operating modes and energy consumption.PV-optimised chargingWhen used in conjunction with a compatible Deye energy system, the wallbox can prioritise charging when the photovoltaic system is producing surplus solar power. This increases self-consumption and reduces the amount of electricity purchased from the grid at a cost.Comprehensive safety featuresAn integrated 6 mA DC fault current detection system, together with protection functions against overvoltage, undervoltage, overload, short circuit, earth fault and overtemperature, ensures safe and reliable charging operation.Robust housing for indoor and outdoor useWith an IP66 protection rating, the wallbox is dust-tight and protected against powerful water jets. It is therefore suitable for installation in garages, carports and suitable outdoor areas.Standardised Type 2 connectionThe integrated Type 2 charging cable allows connection to a wide range of electric and plug-in hybrid vehicles commonly found in Europe. The vehicle can be connected directly to the wallbox without the need for a separate charging cable.Smart energy management for your homeThe Deye SUN-EVSE22K01-EU-AC is more than just a standard charging station. Thanks to its smart communication with compatible Deye components, it can be integrated into the home’s energy management system. The charging power can be adjusted to suit the available energy and the selected operating mode.In addition to direct plug-and-play charging, the wallbox supports time-controlled charging cycles and a solar-priority mode. This allows the electric vehicle to be charged specifically at off-peak times or using surplus PV energy. The LED status indicator provides continuous updates on the current operating status.Communication and controlThe wallbox features Wi-Fi, Bluetooth Low Energy and LoRa. This allows it to be integrated into both a local network and a compatible ‘ Deye ’ energy system. Supported communication protocols such as OCPP 1.6 and Modbus TCP facilitate integration into suitable charging and energy management systems.Contents and features1x Deye SUN-EVSE22K01-EU-AC Smart Wallbox, 22 kW1x integrated Type 2 charging cable1x wall bracket including fixing materials1x User and Installation Guide

Regular price: €355.81
Regular price: €355.81
zentheme.component.product.quantitySelect.legend
DEYSUN-EVSE11K01-EU-AC

Deye WALLBOX SUN-EVSE11K01-EU-AC 11 kW Smart EV Charger

The Deye SUN-EVSE11K01-EU is a smart 11 kW wallbox for the safe, fast and efficient charging of electric vehicles in both domestic and commercial settings. Thanks to its three-phase connection with a charging power of up to 11 kW, it charges compatible electric and plug-in hybrid vehicles significantly faster than a standard domestic socket.Thanks to smart control options, integrated communication interfaces and comprehensive safety features, the Deye SUN-EVSE11K01-EU can be flexibly integrated into a modern energy management system. When used in conjunction with compatible Deye inverters, the wallbox can also be used for surplus PV charging, allowing self-generated solar power to be specifically used to charge the vehicle.The key benefits at a glanceHigh charging powerWith a charging power of up to 11 kW when connected to a three-phase supply, the Wallbox charges a compatible electric vehicle much faster than a standard domestic socket.Smart controlCharging processes can be conveniently monitored and controlled via the app. In addition, the wallbox supports authentication via RFID card as well as straightforward plug-and-play operation.Weatherproof and robust designThe housing, with an IP65 protection rating, is protected against dust and water jets. The IK10 impact resistance provides additional protection against mechanical impacts and ensures reliable operation in garages, carports and suitable outdoor areas.Comprehensive safety featuresThe integrated residual current detection for 30 mA AC and 6 mA DC, as well as protection functions against overvoltage, undervoltage, overload, short circuit and overheating, ensure safe charging operation. In accordance with the specified product characteristics, no external Type B residual current circuit breaker is required.Smart charging and solar optimisationThe Deye SUN-EVSE11K01-EU is more than just a standard charging point. It can be used as a smart component of a modern energy system and helps to increase the self-consumption of self-generated solar power. When used in conjunction with compatible Deye inverters, the wallbox supports surplus PV charging. This means the electric vehicle is charged primarily using the solar energy currently available.The wallbox can be integrated into the home network and compatible energy management systems via the built-in Wi-Fi, Bluetooth and RS485 interfaces. Charging times can be scheduled so that the vehicle is charged, for example, when solar power generation is high or during off-peak tariff periods. Control and monitoring are carried out via the Solarman or Deye cloud application.Flexible installation and operationThe wallbox can be mounted directly on a wall or, alternatively, on a suitable freestanding column. The integrated 5-metre Type 2 charging cable allows direct connection to numerous electric and plug-in hybrid vehicles commonly found in Europe. The compact housing and intuitive operation facilitate integration into both domestic and commercial charging environments.Contents of the package1x Deye SUN-EVSE11K01-EU wallbox, 11 kW1x integrated Type 2 charging cable, 5 m long1x wall bracket including fixing materials with screws and wall plugs1x User Manual and Installation Guide

Regular price: €343.91
Regular price: €343.91
zentheme.component.product.quantitySelect.legend
FOXA022KP1EBWO

FOX ESS Wallbox A022KP1-E-B-WO – 22 kW 3-phase with fixed Type 2 charging cable

FOX ESS Wallbox 22 kW with fixed charging cable – maximum AC charging power for home and commercial useThe FOX ESS Wallbox A022KP1-E-B-WO from the A-Series charges electric cars via a three-phase connection with up to 22 kW, the highest charging power possible from a standard domestic AC supply. The permanently attached Type 2 charging cable with a length of 6 m is always to hand: park the car, plug it in, charge.The wallbox is connected via Wi-Fi, Ethernet and Bluetooth, and charging times can be scheduled via an app. According to the manufacturer, when used in combination with a PV system, it can feed surplus solar power directly into the car. Via OCPP 1.6 JSON or 2.0.1 and MODBUS, it can also be integrated into charge management and billing systems, making it ideal for company car parks, blocks of flats or vehicle fleets.Key featuresUp to 22 kW charging power, three-phase, 32 AFixed Type 2 charging cable with a length of 6 mCharging with solar power: Use of surplus PV power possible according to the manufacturerDynamic load management to protect the domestic connectionScheduled charging at times you specifyNetwork connectivity: Wi-Fi (2.4 GHz), Ethernet (RJ45), Bluetooth, optional 4GOCPP 1.6 JSON or 2.0.1 and open MODBUS interfaceStart charging via Plug & Charge, RFID card or appResidual current detection: AC 30 mA + DC 6 mARobust: IP65-rated housing, IK08 impact resistance Convenient with a fixed cableThe charging cable is permanently attached to the wallbox. You don’t need to fetch a cable from the boot, yet you always have it with you wherever you need it. At 6 m long, it can reach charging points that aren’t facing directly towards the wall, such as when the car is parked in reverse or at an angle. 22 kW: What your car makes of itThe wallbox delivers up to 22 kW. The actual charging speed is determined by the vehicle’s on-board charger. Many electric cars charge at a maximum of 11 kW on AC, whilst some models support 22 kW. At 22 kW, theoretically around 110 to 120 km of range per hour is possible, based on a consumption of 18 to 20 kWh/100 km. Vehicle battery size20 to 80 % – vehicle charges at 22 kW20 to 80 % – vehicle charges at 11 kW 40 kWhapprox. 1.1 hoursapprox. 2.2 hours 60 kWhapprox. 1.6 hoursapprox. 3.3 hours 77 kWhapprox. 2.1 hoursapprox. 4.2 hours 100 kWhapprox. 2.7 hoursapprox. 5.5 hours Calculated values based on constant charging power, excluding charging losses. The actual charging time depends on the vehicle, the on-board charger and the temperature. Solar power straight into the carAccording to the manufacturer, the A-Series supports the direct use of surplus solar power. Electricity that your PV system does not currently need in the home is then fed into the car rather than into the grid. The dynamic load management also adjusts the charging power to match current consumption, ensuring that the domestic connection is not overloaded.  SafetyThe wallbox monitors the charging process with numerous protective functions and detects fault currents in both the AC (30 mA) and DC (6 mA) ranges. The housing has been treated to be salt-spray and UV-resistant, making it suitable for outdoor installation.Overvoltage and undervoltage protectionOvercurrent and overtemperature protectionResidual current detection AC 30 mA + DC 6 mA (RDC-DD in accordance with IEC 62955)Earth fault monitoring and PEN fault detectionIntegrated surge arresterTamper protectionTechnical specificationsElectrical specificationsMax. charging power: 22 kWConnection: 3L/N/PE, three-phaseRated voltage: 400 V AC ±20 %Rated current (input/output): 32 ARated frequency: 50/60 HzPower accuracy: ≤ 2 %Standby power consumption: ≤ 10 WConnectivity and communicationConnection type: permanently attached Type 2 charging cable (IEC 62196)Charging cable length: 6 mConnectivity: Wi-Fi (2.4 GHz), Ethernet (RJ45), Bluetooth4G LTE: optional, Micro-SIM (3FF), SIM card not includedProtocols: OCPP 1.6 JSON or OCPP 2.0.1, MODBUSVehicle communication: optional, ISO 15118-compliantRFID reader: Mifare ISO/IEC 14443 ACharging start: Plug & Charge, RFID card or appGeneral specificationsDimensions (W × H × D): 190 × 320 × 130 mmWeight: ≤ 6.3 kg (including charging cable)Installation: Wall mounting [please check for column mounting]Ingress protection: IP65 enclosureImpact resistance: IK08Operating temperature: −30 to +50 °CStorage temperature: −40 to +70 °CHumidity: 5–95 % (non-condensing)Installation height: < 2,000 mCooling: self-coolingEMC: Class BCertifications: CE, CB, UKCA, RCMStandards: EN/IEC 61851-1:2019, EN/IEC 61851-21-2:2021 

Regular price: €589.05
Regular price: €589.05
zentheme.component.product.quantitySelect.legend
FOXA011KS1EBWO

FOX ESS Wallbox A011KS1-E-B-WO 11 kW 3-phase with Type 2 socket

FOX ESS Wallbox 11 kW with Type 2 socket – flexible charging, even with solar powerThe FOX ESS Wallbox A011KS1-E-B-WO from the A-Series charges your electric car via a three-phase connection with up to 11 kW. Instead of a fixed cable, it features a Type 2 socket: you use your own charging cable, and there’s no cable hanging off the wall. This is handy for garages, carports or house walls, and ideal when using different vehicles or cable lengths.According to the manufacturer, when used in conjunction with a PV system, the wallbox can charge surplus solar power directly into the car. It connects to the app and home network via Wi-Fi, Ethernet or Bluetooth. Charging times can be scheduled, and thanks to OCPP 1.6 JSON or 2.0.1, it can also be integrated into professional charge management systems.Key features11 kW charging power, three-phase, 16 AType 2 socket with earth contact, compatible with your own Type 2 charging cableCharging with solar power: Use of surplus PV power possible according to the manufacturerScheduled charging at times you specifyNetwork connectivity: Wi-Fi (2.4 GHz), Ethernet (RJ45), Bluetooth, optional 4GOCPP 1.6 JSON or 2.0.1 and open MODBUS interfaceStart charging via Plug & Charge, RFID card or appResidual current detection: AC 30 mA + DC 6 mARobust: IP65 enclosure, IP55 socket, IK08 impact resistanceCompact and lightweight: 190 × 320 × 144 mm, max. 3.2 kg Why choose a wallbox with a socket?With a wallbox fitted with a socket, you plug in your own Type 2 charging cable. This has several advantages:Tidy: No cables left hanging permanently on the wall.Flexible: You choose the cable length to suit your parking space.Versatile: Guests with their own cables can also charge.Suitable for use on the move: The same cable fits public AC charging points. Solar power straight into the carAccording to the manufacturer, the A-Series supports the direct use of surplus solar power for charging. This means that electricity which your PV system does not currently need in the house flows into the car instead of into the grid. With dynamic load management, the wallbox also adjusts the charging power to match current consumption, ensuring that the domestic supply is not overloaded. At 11 kW, the wallbox theoretically charges at a rate of approximately 55 to 60 km of range per hour, with a consumption of 18 to 20 kWh/100 km. This is subject to the vehicle being capable of three-phase charging at 11 kW. Vehicle battery sizeCharging from 20 to 80 % (theoretical)Charging from 0 to 100 % (theoretical) 40 kWhapprox. 2.2 hoursapprox. 3.6 hours 60 kWhapprox. 3.3 hoursapprox. 5.5 hours 77 kWhapprox. 4.2 hoursapprox. 7 hours 100 kWhapprox. 5.5 hoursapprox. 9 hours Calculated values at a constant 11 kW, excluding charging losses. The actual charging time depends on the vehicle, the on-board charger and the temperature.SafetyThe wallbox monitors the charging process using a range of protective functions and detects fault currents in both the AC (30 mA) and DC (6 mA) ranges. The housing has been treated to be salt-spray and UV-resistant, making it suitable for outdoor installation.Overvoltage and undervoltage protectionOvercurrent and overtemperature protectionResidual current detection AC 30 mA + DC 6 mA (RDC-DD in accordance with IEC 62955)Earth fault monitoring and PEN fault detectionIntegrated surge arresterTamper protectionTechnical specificationsElectrical specificationsMax. charging power: 11 kWConnection: 3L/N/PE, three-phaseRated voltage: 400 V AC ±20 %Rated current (input/output): 16 ARated frequency: 50/60 HzPower accuracy: ≤ 2 %Standby power consumption: ≤ 10 WConnectivity and communicationConnection type: Type 2 socket with earth contact (IEC 62196)Charging cable: not permanently attachedConnectivity: Wi-Fi (2.4 GHz), Ethernet (RJ45), Bluetooth4G LTE: optional, Micro-SIM (3FF), SIM card not includedProtocols: OCPP 1.6 JSON or OCPP 2.0.1, MODBUSVehicle communication: optional, ISO 15118-compatibleRFID reader: Mifare ISO/IEC 14443 ACharging start: Plug & Charge, RFID card or appGeneral specificationsDimensions (W × H × D): 190 × 320 × 144 mmWeight: ≤ 3.2 kgInstallation: Wall mounting Protection rating: Housing IP65, socket IP55Impact resistance: IK08Operating temperature: −30 to +50 °CStorage temperature: −40 to +70 °CHumidity: 5–95 % (non-condensing)Installation height: < 2,000 mCooling: self-coolingEMC: Class BCertifications: CE, CB, UKCA, RCMStandards: EN/IEC 61851-1:2019, EN/IEC 61851-21-2:2021 

Regular price: €458.15
Regular price: €458.15
zentheme.component.product.quantitySelect.legend
FOXA011KP1EBWO

Fox A011KP1-E-B-WO Wallbox 11kWh with fixed charging cable

Regular price: €481.95
Regular price: €481.95
zentheme.component.product.quantitySelect.legend
FOXA011KS1EBWOGP

Fox A011KS1-E-B-WOGP Wallbox 11kWh with Type 2 socket

Regular price: €593.81
Regular price: €593.81
zentheme.component.product.quantitySelect.legend
FOXA022KP1EBWOGP

Fox A022KP1-E-B-WOGP Wallbox 22kWh with Type 2 socket

Regular price: €725.90
Regular price: €725.90
zentheme.component.product.quantitySelect.legend
FOXA022KS1EBWOGP

Fox A022KS1-E-B-WOGP Wallbox 22kWh with Type 2 socket

Regular price: €684.25
Regular price: €684.25
zentheme.component.product.quantitySelect.legend