FOX ESS Wallbox A022KP1-E-B-WO – 22 kW 3-phase with fixed Type 2 charging cable
€589.05
Prices include 19 % VAT, free delivery
Product information
FOX ESS Wallbox 22 kW with fixed charging cable – maximum AC charging power for home and commercial use
The FOX ESS Wallbox A022KP1-E-B-WO from the A-Series charges electric cars via a three-phase connection with up to 22 kW, the highest charging power possible from a standard domestic AC supply. The permanently attached Type 2 charging cable with a length of 6 m is always to hand: park the car, plug it in, charge.
The wallbox is connected via Wi-Fi, Ethernet and Bluetooth, and charging times can be scheduled via an app. According to the manufacturer, when used in combination with a PV system, it can feed surplus solar power directly into the car. Via OCPP 1.6 JSON or 2.0.1 and MODBUS, it can also be integrated into charge management and billing systems, making it ideal for company car parks, blocks of flats or vehicle fleets.
Key features
- Up to 22 kW charging power, three-phase, 32 A
- Fixed Type 2 charging cable with a length of 6 m
- Charging with solar power: Use of surplus PV power possible according to the manufacturer
- Dynamic load management to protect the domestic connection
- Scheduled charging at times you specify
- Network connectivity: Wi-Fi (2.4 GHz), Ethernet (RJ45), Bluetooth, optional 4G
- OCPP 1.6 JSON or 2.0.1 and open MODBUS interface
- Start charging via Plug & Charge, RFID card or app
- Residual current detection: AC 30 mA + DC 6 mA
- Robust: IP65-rated housing, IK08 impact resistance
Convenient with a fixed cable
The charging cable is permanently attached to the wallbox. You don’t need to fetch a cable from the boot, yet you always have it with you wherever you need it. At 6 m long, it can reach charging points that aren’t facing directly towards the wall, such as when the car is parked in reverse or at an angle.
22 kW: What your car makes of it
The wallbox delivers up to 22 kW. The actual charging speed is determined by the vehicle’s on-board charger. Many electric cars charge at a maximum of 11 kW on AC, whilst some models support 22 kW. At 22 kW, theoretically around 110 to 120 km of range per hour is possible, based on a consumption of 18 to 20 kWh/100 km.
| Vehicle battery size | 20 to 80 % – vehicle charges at 22 kW | 20 to 80 % – vehicle charges at 11 kW |
|---|---|---|
| 40 kWh | approx. 1.1 hours | approx. 2.2 hours |
| 60 kWh | approx. 1.6 hours | approx. 3.3 hours |
| 77 kWh | approx. 2.1 hours | approx. 4.2 hours |
| 100 kWh | approx. 2.7 hours | approx. 5.5 hours |
Calculated values based on constant charging power, excluding charging losses. The actual charging time depends on the vehicle, the on-board charger and the temperature.
Solar power straight into the car
According to the manufacturer, the A-Series supports the direct use of surplus solar power. Electricity that your PV system does not currently need in the home is then fed into the car rather than into the grid. The dynamic load management also adjusts the charging power to match current consumption, ensuring that the domestic connection is not overloaded.
Safety
The wallbox monitors the charging process with numerous protective functions and detects fault currents in both the AC (30 mA) and DC (6 mA) ranges. The housing has been treated to be salt-spray and UV-resistant, making it suitable for outdoor installation.
- Overvoltage and undervoltage protection
- Overcurrent and overtemperature protection
- Residual current detection AC 30 mA + DC 6 mA (RDC-DD in accordance with IEC 62955)
- Earth fault monitoring and PEN fault detection
- Integrated surge arrester
- Tamper protection
Technical specifications
Electrical specifications
- Max. charging power: 22 kW
- Connection: 3L/N/PE, three-phase
- Rated voltage: 400 V AC ±20 %
- Rated current (input/output): 32 A
- Rated frequency: 50/60 Hz
- Power accuracy: ≤ 2 %
- Standby power consumption: ≤ 10 W
Connectivity and communication
- Connection type: permanently attached Type 2 charging cable (IEC 62196)
- Charging cable length: 6 m
- Connectivity: Wi-Fi (2.4 GHz), Ethernet (RJ45), Bluetooth
- 4G LTE: optional, Micro-SIM (3FF), SIM card not included
- Protocols: OCPP 1.6 JSON or OCPP 2.0.1, MODBUS
- Vehicle communication: optional, ISO 15118-compliant
- RFID reader: Mifare ISO/IEC 14443 A
- Charging start: Plug & Charge, RFID card or app
General specifications
- Dimensions (W × H × D): 190 × 320 × 130 mm
- Weight: ≤ 6.3 kg (including charging cable)
- Installation: Wall mounting [please check for column mounting]
- Ingress protection: IP65 enclosure
- Impact resistance: IK08
- Operating temperature: −30 to +50 °C
- Storage temperature: −40 to +70 °C
- Humidity: 5–95 % (non-condensing)
- Installation height: < 2,000 m
- Cooling: self-cooling
- EMC: Class B
- Certifications: CE, CB, UKCA, RCM
- Standards: EN/IEC 61851-1:2019, EN/IEC 61851-21-2:2021
| Cable length of charging gun: | 6 m |
|---|---|
| Charging modes: | Plug & Charge / scheduled charging |
| Communication: | Bluetooth / Wi-Fi (2.4 GHz) / Ethernet (RJ45) / 4G LTE (optional) |
| Dimensions (W x H x D): | 190 x 320 x 130 mm |
| Frequency: | 50/60 Hz |
| Input current: | 32 A |
| Input voltage: | 400 V ± 20% |
| Max. charging power: | 22 kW |
| Operating temperature: | -30 °C to +50 °C |
| Permissible humidity: | 5 ~ 95% |
| Protection class: | Housing: IP65 / Socket: IP55 |
| Safety / EMC / Standards: | CE/CB/UKCA/RCM / Class B / EN/IEC 61851-1: 2019, EN/IEC 61851-21-2: 2021 |
| Weight: | approx. 6.3 kg |
Login