Solar cable black 50m 6mm

The Solar cable SOLR650 (50 metres, 6mm²) in red is the ideal cable by the metre for photovoltaic projects that place the highest demands on efficiency and durability. With a length of 50 metres and a reinforced cross-section of 6mm², this cable offers the perfect reserves for string cabling on rooftops or connecting distant module arrays. The red colouring is used for standard-compliant identification of the positive pole (+), which makes installation clear and minimises the risk of polarity reversal.Certified according to the international standard IEC 62930, this cable fulfils the strictest requirements for use in modern PV systems up to 1500V DC. The generous cross-section ensures that the voltage drop is minimised and the overall yield of your system is maximised, even with the high currents of modern high-performance modules.Highlights at a glanceMaximum efficiency: The cross-section of 6mm² massively reduces the electrical resistance and ensures minimal voltage drop, especially over distances of 50 metres.Certified safety: Complies with the IEC 62930 standard (H1Z2Z2-K) for permanent use in photovoltaic direct current systems up to 1500V.Optimum project length: 50 metres in one piece enable uninterrupted installation without additional plug connections between the module array and inverter.Weather & UV resistant: The high-quality XLPO double insulation protects the cable against embrittlement caused by sun, ozone and extreme weather conditions for decades.Corrosion-protected conductor: Fine-stranded, tinned copper offers the best long-term conductivity and provides effective protection against oxidation, even in damp or salty environments.High thermal load capacity: Reliable operation in a wide temperature range from -40°C to +90°C.Areas of applicationThe SOLR650 is the ideal choice for demanding installation scenarios:Large roof systemsPerfect for connecting the solar modules to the inverter if it is installed in the basement or in a remote technical room.Powerful balcony power stationsIdeal for systems with modern modules (500Wp+) to transport the high currents safely and without losses.Island & battery storageIdeally suited for 24V or 48V systems where low voltage drops are crucial for optimum battery charging.Assembly & safety instructionsProfessional connectionOnly use high-quality MC4 connectors that are approved for 6mm² cross-sections. Precise crimping with a special solar crimping tool is essential.Mechanical fixationFasten the cable at regular intervals with UV-resistant cable ties to avoid mechanical stress caused by wind or dead weight on the connections.Avoidance of induction loopsRun positive (red) and negative (black) cables as parallel and close together as possible to minimise electromagnetic interference fields. Features Model / SKU**SOLR650** Conductor cross-section**6.0 mm²** Delivery form**50 metre ring** ColourRed (positive pole) Rated voltageDC: 1.5 kV / Max. 1.8 kV Conductor materialCopper, tinned (class 5) Temperature range-40°C to +120°C (on the conductor) Certification**IEC 62930 / EN 50618** Special featureHalogen-free, UV-resistant & short-circuit-proof  FAQs about solar cable red 50m 6mm²Why is 6mm² for 50 metres better than 4mm²?Due to the lower resistance. The electrical resistance adds up over a distance of 50 metres. With 6mm² you reduce the voltage drop by around a third compared to 4mm². This ensures a higher system voltage at the inverter and therefore a measurably higher yield.Can the cable be laid freely outdoors?Yes. The cable is specially certified for permanent outdoor installation. It is resistant to UV light, ozone and ammonia, which also qualifies it for use in agriculture.Is the cable flame-retardant?Yes. The XLPO insulation is flame-retardant and halogen-free. In the event of a fire, the cable produces hardly any smoke and no corrosive gases, which significantly increases safety in the building.

The Deye SE-G5.1Pro-B is a high-performance battery module with a storage capacity of 5.12 kWh, based on safe lithium iron phosphate (LiFePO4) technology. With its modular design, support for high-current applications and flexibility in installation, it is the ideal solution for modern energy storage systems in both domestic and commercial settings.Highlights at a glanceSafe & durable: Cobalt-free LiFePO₄ cells with intelligent BMS Modular and scalable: Up to 64 modules – max. 327 kWh storage capacity High compatibility: Suitable for wall mounting, floor mounting & 19" rack Easy maintenance: Automatic networking, remote monitoring & USB firmware updates Reliable operation: IP20, natural cooling, wide temperature range down to -20 °CCompact, scalable & intelligently networkedWith an individual capacity of 5.12 kWh, the Deye SE-G5.1Pro-B is ideal for smaller storage solutions or as a component in large-scale modular storage systems. Thanks to the ability to connect up to 64 units in parallel, a maximum total capacity of 327 kWh is achievable. Perfect for applications with growing energy requirements. Automatic network addressing and support for firmware updates via USB or remote access significantly simplify commissioning and maintenance.Flexible mounting – space-saving & easy to installThanks to three mounting options—rack mounting (19-inch), wall mounting or floor installation—the module can be optimally positioned in almost any environment. With its compact design, measuring just 133 mm in height, it saves valuable space in technical rooms or living areas.Who is the Deye SE-G5.1Pro-B suitable for?Private households looking for a safe and sustainable storage system Commercial enterprises requiring scalable storage solutions for self-consumption or backup System integrators & installers who value easy integration and low maintenance Sustainability-minded users who rely on environmentally friendly storage technology ModelDEYSE-G5.1 Pro-B Battery typeLiFePO4 Module capacity (kWh)5.12 Module nominal voltage (V)51.2 Module capacity (Ah)100 System nominal voltage (V)51.2 System operating voltage (V)43.2-57.6 System capacity (kWh)5.12 System Usable Capacity (kWh)4.6 Charging/discharging current (A) - Recommendation50 Charging/discharging current (A) - rated value100 Charging/discharging current (A) - Peak discharge (2 min,25°C)150 Operating temperature (°C)Charging: 0 ~ 55 / Discharging: -20 ~ 60 LCD displaySOC%, Power, Total Voltage Communication portCAN2.0, RS485 Humidity5% ~ 90% Altitude≤2000m IP rating of the enclosureIP65 Storage temperature (°C)0 ~ 35 Dimensions (W/D/H, mm)440 * 133 * 540 Weight (kg)45 Installation locationFloor mounting, rack mounting Recommended discharge depth90% Cycle life25 ± 2°C, 0.5C/0.5C, EOL70% ≥ 6000 Warranty10 years CertificationsUN38.3, IEC62619, CE, UK, VDE2510-50, CEI 0-21, FCC, UL1973, UL9540A  FAQs on the Deye SE-G5.1Pro-B battery storage systemHow much energy is actually usable?One module provides 5.12 kWh gross capacity, of which approximately 4.6 kWh is usable at a 90% depth of discharge; particularly suitable for residential and commercial applications.What are the applicable voltages and currents per module?The module operates at a nominal voltage of 51.2 V and has a capacity of 100 Ah. The continuous current is 50 A, with a peak current of up to 150 A possible for 10 seconds.How many modules can be combined?In the IP20 version, up to 64 modules can be connected in parallel, corresponding to a total capacity of over 327 kWh. Common in domestic applications: six modules per tower, i.e. 30.7 kWh per unit.What is the module's lifespan?The cells achieve over 6,000 cycles at 90% DoD, with a residual capacity of at least 70% at end of life, meaning they are designed for long-term use.Which Deye inverters is the system compatible with?The battery is officially approved for all three-phase hybrid inverters in the SUN-xK-HP3 and SUN-xK-BM series and is fully plug-and-play compatible without the need for additional adjustments. We strongly recommend checking the compatibility list, as the manufacturer may make changes. Contents of delivery Deye SE-G5.1Pro-B rack battery module (5.12 kWh): Module typeThis is a a single, flexible low-voltage battery module for installation in 19-inch racks, wall mounting or floor-standing.1 x Deye SE-G5.1Pro-B battery module (5.12 kWh)The central storage unit with 5.12 kWh (100 Ah) in rack format, including an intelligent, integrated battery management system (BMS).1 x set of mounting handles / rack earsHandles for easier handling and for securing the module in a 19-inch server rack.1 x set of battery connection cables (positive & negative)A pair of pre-assembled high-performance cables for connecting the module (or battery stack) to a compatible hybrid inverter.1 x communication cable (CAN/RS485)A data cable for communication between the battery module and the inverter.1 x parallel connection cable (power & communication)Short cables to connect this module’s power and data bus to another module.1 x earthing cableA protective earth cable for the correct earthing of the housing.1 x User and Installation GuideA printed manual describing the various installation types (rack, wall, stacking).2 x wall bracketsFor wall mounting the battery pack 4 x feetFor stacking and securing the battery

The Felicity FLB 48314TG1 is a powerful and safe low-voltage battery storage unit with modern LiFePO4 technology. It offers high cycle life, flexible expansion options and reliable energy supply for residential and commercial photovoltaic systems. With an integrated intelligent battery management system, remote monitoring functions and comprehensive protection mechanisms, it is the ideal solution for demanding energy storage projects.Highlights at a glance16 kWh LiFePO4 battery for maximum safety and durabilityRemote monitoring via integrated WiFi and BluetoothHigh charging and discharging rates for fast energy supplyExpandable up to 32 batteries (max. 512 kWh)Integrated intelligent BMS with comprehensive protectionCompatible with leading inverter brandsIntelligent energy management for maximum performanceThe FLB 48314TG1 ensures precise monitoring of all operating parameters, such as voltage, temperature and charge/discharge current, through its integrated BMS. Risks such as overcharging, deep discharge or overheating are reliably prevented. With a high charge and discharge current of up to 160 A continuous and 200 A peak (15 seconds), it is ideally suited for applications with high energy demand.Flexibility and easy expansionThanks to scalability up to 32 battery modules, the storage can be flexibly adapted to growing energy requirements. Communication via RS485 or CAN ensures smooth integration with inverters from well-known manufacturers. Thanks to floor mounting and compact design, the storage can be easily installed even where space is limited.Safety at the highest levelIn addition to its integrated battery management system, the FLB 48314TG1 is equipped with an aerosol fire extinguishing system, fuses and circuit breakers. The IP65 enclosure rating makes it resistant to dust and water, so it can also be used in demanding environments. The patented external fuse design allows for quick replacement in the event of service.Who is the Felicity FLB 48314TG1 suitable for?Operators of PV systems with high storage requirementsBusinesses and industry with continuous energy usageProjects with high safety requirementsInstallations in regions with demanding weather conditionsProperties  ModelFLB48314TG1 Battery typeLiFePO₄ System capacity (kWh)16 Nominal system voltage (V)51.2 System capacity (Ah)314 System operating voltage (V)44.8-57.6 Recommended depth of discharge (DoD)≥ 95 % Charge/discharge current (A) - recommendation60 Charge/discharge current (A) - peak discharge (2 min, 25°C)100 Operating temperature (°C)Charging: 0 ~ 55 / Discharging: -20 ~ 55 Communication interfaceCAN, RS485 Humidity5% ~ 95% IP enclosure ratingIP65 Storage temperature (°C)0 ~ 35 Dimensions (W/D/H, mm)600 * 450 * 180 Weight (kg)121 Installation locationFloor mounting Cycle life≥ 8,000 cycles ScalabilityUp to 32 units in parallel (512 kWh) Warranty10 years CertificationsOn request from sales  FAQs about the Felicity low-voltage battery storageHow much energy is available and how much is usable?The nominal energy is 16 kWh. With up to 95 % recommended depth of discharge, up to approx. 15.2 kWh can be used.How many charge cycles can be expected?The manufacturer states up to 8,000 cycles under laboratory conditions. Please note that real values depend on use, temperature and C-rate. Does the storage support remote monitoring and what interfaces are there?Yes, the storage supports remote monitoring via integrated WiFi and Bluetooth for remote reading of battery data. In addition, RS485 and CAN interfaces are available for communication with compatible inverters.Can I integrate the battery storage into my existing PV system?Yes, the FLB 48314TG1 is compatible with leading inverter brands and can easily be integrated into existing photovoltaic systems.Is remote monitoring possible?Yes, thanks to integrated WiFi and Bluetooth you can conveniently monitor all operating data of the storage system remotely.How many battery modules can be connected in parallel?The storage is expandable to up to 32 units and thus reaches a total capacity of up to 512 kWh. Scope of delivery Felicity FLB 48314TG1 battery storage: 1 x Felicity 16 kWh battery storage (FLB 48314TG1)The central storage unit with a 314 Ah capacity. It contains the intelligent battery management system (BMS) and usually also an integrated aerosol fire extinguishing system.1 x set of battery connection cables (plus & minus)A pair of pre-assembled high-power cables (red and black) for connecting the storage unit to an external inverter.1 x communication cable (CAN/RS485)A data cable (typically with RJ45 connectors) to ensure communication between the battery BMS and the inverter.1 x earthing cableA protective earth cable (yellow-green) for proper earthing of the metal casing.1 x mounting accessories (floor mounting)This model is designed as a mobile, free-standing unit and is often supplied with pre-installed castors. Due to its very high weight of approx. 155 kg, wall mounting is excluded.1 x operating and installation instructionsA printed manual with all safety-relevant instructions, installation steps and configuration guidelines.1 x set of mounting materialsIncludes materials for attachment of an anti-tip safety device.

The Deye SUN-6K-SG05LP1-EU is a state-of-the-art and powerful single-phase hybrid inverter that functions as an intelligent hub for larger photovoltaic systems. It has been developed to offer you maximum independence, efficiency, and security of supply. With a high output power of 6 kW, it manages the energy flows between your solar panels, the battery storage and the public power grid. Thanks to its integrated emergency power function, you are reliably supplied with high performance even in the event of a power failure.Highlights at a glanceIntelligent hybrid system: Manages PV generation, battery storage and mains consumption for maximum self-consumption.High performance: With 6 kW output, ideal for larger households, heat pumps or small businesses.Integrated emergency power supply: Provides uninterrupted power supply (UPS level) during mains failure.Two MPP trackers: Enables connection of two independent module fields, ideal for east-west roofs or partial shading.Flexible battery connection: Compatible with a wide range of 48V low-voltage batteries.Comprehensive monitoring: Integrated Wi-Fi module for simple and intuitive system monitoring via app.Smart energy management for your homeThe Deye hybrid inverter is more than just a converter from DC to AC. It is the brain of your energy supply. During the day, it supplies your loads directly with solar power, while surplus energy is stored in your battery for use at night or on cloudy days. Only when the storage is full and no load needs electricity is the energy fed into the public grid. This way, you maximise your self-consumption and significantly reduce your electricity costs.Maximum yields through flexible PV connectionThanks to the two integrated MPP trackers (Maximum Power Point), the Deye SUN-6K offers maximum flexibility in planning your PV system. You can connect two separate module strings with different orientations (e.g. east and west sides of the roof) or with different module types. Each tracker optimises the output of its string individually, so you always achieve the maximum possible energy yield, even in complex roof situations or partial shading.Independence through integrated emergency power supplyA special feature of this inverter is the integrated emergency power function. In the event of a failure of the public power grid, the device switches to a separate emergency power output in less than 10 milliseconds and continues to supply selected critical loads such as lighting, refrigerator or IT infrastructure with power from the battery storage. This UPS-level (Uninterruptible Power Supply) switching time ensures maximum supply reliability. Features  ModelDeye SUN-6K-SG05LP1-EU Battery input data Battery typeLead-acid or Li-ion Battery voltage range (V)40~60 Max. charging current (A)140 Max. discharging current (A)140 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adaptation to BMS PV string input data Max. DC input power (W)9600 Nominal PV input voltage (V)370 Starting voltage (V)80 MPP voltage range (V)125-425 Max. DC input voltage (V)550 PV input current (A)13+22 Max. PV short-circuit current (A)17+28.6 Number of MPPT2 Strings per MPPT1+2 AC output data AC nominal power and UPS power (W)6000 Max. AC output power (W)6600 AC output nominal current (A)27.3 Maximum AC output nominal current (A)30 Max. continuous AC throughput (A)40 Peak power (without grid)2 times nominal power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Total harmonic distortion (THD)< 3% ( nominal power ) Direct current feed<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97,00% MPPT efficiency>99% Protection FusesIntegrated lightning protection, anti-islanding, reverse polarity protection, short circuit protection, overload protection, and much more. Surge categoryDC Type II/AC Type II Certifications and standards Grid approvalsVDE4105, IEC61727/62116, VDE0126, EN50549-1, CEI 0-21, AS4777, NRS2017, G98, G99, etc. Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range ( ℃ )-45~60°C, >45° C power derating CoolingIntelligent cooling Noise (dB)<30 dB Communication with BMSRS485; CAN Weight (kg)15 Size (mm)330B×580H×232T Degree of protectionIP65 Installation styleWall mount Warranty10 years  FAQs about the Deye SUN-6K-SG05LP1-EU hybrid inverterWhat exactly does "hybrid inverter" mean?A hybrid inverter can manage energy from several sources at the same time. It acts as the interface between the solar panels, the battery storage and the public power grid. It intelligently decides whether the solar power generated is used directly, stored in the battery or fed into the grid.Who is a 6 kW inverter suitable for?A 6 kW inverter is ideal for larger detached houses with higher electricity consumption, for example due to use of a heat pump or an electric vehicle. It is also suitable for small businesses or agricultural operations that want to optimise their own consumption.Which batteries are compatible with this inverter?The Deye SUN-6K is designed for use with 48V low-voltage (LV) lithium-ion battery storage systems. It is compatible with many leading manufacturers. The full compatibility list can be found on the manufacturer's website.Do I need any additional devices for the emergency power function?The inverter has an integrated emergency power output (EPS port). For use, the emergency loads to be supplied must be placed on a separate circuit by a qualified electrician and connected to this output. An additional external transfer switch is generally not required. Scope of delivery: Deye SUN-6K-SG05LP1-EU (6 kW Single-Phase Hybrid Inverter) 1 x Deye SUN-6K-SG05LP1-EU inverterA high-performance single-phase hybrid inverter with 6 kW output, integrated LCD colour touchscreen and support for 48V low-voltage battery systems.1 x Wall Mount BracketA robust metal mounting rail for secure installation of the device on a load-bearing wall.1 x Wi-Fi Stick (Data Logger)A plug-in communication module for connecting to the Internet for remote monitoring via Deye Cloud or Solarman App.1 x Current Transformer (CT)An external split current transformer for measuring energy flows at the property connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The necessary pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x Communication Cable (BMS)A pre-assembled RJ45 data cable for connection between the inverter and the battery management system.1 x Installation Kit (Screws and Plugs)A set of stainless steel screws and heavy-duty wall plugs for professional installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, wiring diagrams and important safety information.

The Deye SE-F16 is a high-capacity low-voltage energy storage system (51.2 V) designed for demanding use in residential and commercial photovoltaic systems. With an enormous rated capacity of 16 kWh (314 Ah) in just one compact housing module, this storage system significantly minimises the space required and the installation effort.This model uses the proven and intrinsically safe lithium iron phosphate (LiFePO4) cell chemistry. Combined with the intelligent Battery Management System (BMS) and a wide range of monitoring options (including Bluetooth), the SE-F16 offers maximum safety, scalability and longevity for the self-sufficient energy supply of your home or business.Highlights at a glanceMassive storage capacity (16 kWh): With a rated capacity of 314 Ah at 51.2 V, this single module provides enough energy to reliably supply large households even during prolonged periods of low sunlight.Safe LiFePO4 cell chemistry: The lithium iron phosphate technology guarantees maximum thermal stability and virtually eliminates the risk of thermal runaway (fire hazard).Powerful power handling: The system supports an enormous continuous discharge current of up to 230 A and peak currents of 280 A (for 10 seconds), ideal for power-hungry large loads such as heat pumps or wallboxes.Extreme scalability: For even greater energy requirements, up to 32 units can be connected in parallel as standard. With a CAN bridge, scaling up to 64 modules is even possible.Smart monitoring & connectivity: In addition to CAN2.0 and RS485, the storage system features Bluetooth for convenient monitoring via smartphone app. The "C" version (SE-F16-C) also has an integrated LCD display.Longevity & efficiency: Certified for over 6,000 charge cycles (at 25°C), ensuring decades of reliable operating life in daily use.Flexible installation: Despite the high weight, the housing system is extremely flexible and can be installed either on the wall, floor-standing or stacked.ApplicationsThe Deye SE-F16 is the perfect solution for demanding energy scenarios:Single-family and multi-family houses: Maximises self-consumption of PV power and, in combination with a hybrid inverter, provides a powerful emergency power supply for the entire building.Commercial applications (C&I): Used to cap expensive peak loads (peak shaving) and stores large PV surpluses in agricultural or commercial businesses.Off-grid & stand-alone systems: Thanks to its gigantic capacity and high continuous discharge power, it offers a reliable energy source for completely off-grid properties.Installation & safety instructionsLogistics and weight: At a weight of 109 kg, the module is extremely heavy. Installation should обязательно be carried out with suitable lifting equipment (stair climber) or by at least two to three people.Choice of location: The storage system must be installed in a dry and ideally frost-free room (protection class IP21). Charging at temperatures below 0°C is automatically blocked by the BMS to protect the cells.Cable cross-sections: Due to the extremely high currents (up to 230 A continuous load), the connection cables to the inverter or busbar must have a cross-section of at least 70 mm², preferably 95 mm², in order to avoid overheating and voltage losses.Commissioning with parallel connection: If you connect several SE-F16 modules together, all units must be charged to exactly the same voltage level before cabling in order to prevent dangerous equalisation currents. Features  ModelDeye SE-F16 (C series with display) Technology**LiFePO4** (lithium iron phosphate) Rated voltage**51.2 V** (operating range: 44.8 V - 57.6 V) Rated capacity**314 Ah** Nominal energy**16.0 kWh** Max. continuous current**230 A** (peak current 280 A for 10s) Cycle life**≥ 6000 cycles** (at 90% DOD and 25°C) CommunicationCAN 2.0 / RS485 / Bluetooth + app (incl. LCD display) Dimensions (W x D x H)approx. 400 x 233 x 708 mm Weightapprox. **109 kg** Mounting typeFloor mounting, wall mounting or stacked  H2: FAQs about the Deye SE-F16What is the difference between the SE-F16 and the SE-F12?The main difference lies in the capacity and the housing height. The SE-F16 delivers 16 kWh (314 Ah) and weighs around 109 kg, while the SE-F12 11.8 kWh (230 Ah) offers and weighs approx. 84 kg. Both use the same 51.2V architecture and are designed for identical applications, but the F16 offers significantly more autonomy per installed module.What does the "C" in the designation SE-F16-C mean?The suffix "-C" in Deye storage systems indicates the extended model variant which, in addition to Bluetooth monitoring, is also equipped with an integrated LCD display on the front of the housing. This allows the current state of charge (SoC), cell voltages and warning messages to be read directly on the device without having to open the app.Do I absolutely need a Deye inverter for this battery?No, but it is strongly recommended for smooth operation. The SE-F16 is "Plug & Play" compatible with Deye low-voltage hybrid inverters (such as the SG04 series), since the BMS protocol matches natively. With third-party brands (such as Victron, SMA or Solis), communication must first be configured manually via DIP switches or software settings. It is strongly recommended to check the compatibility list, as changes may occur on the manufacturer side.