Deye Sun 50K-SG01HP3-EU-BM4 Three-phase hybrid inverter 50KW

The Deye BOS-G 60 PRO high-voltage storage set is a reliable and high-performance storage solution for commercial applications and demanding private households. With a total capacity of 61.44 kWh, modular expandability and intelligent battery management, it meets the highest standards of safety, efficiency and flexibility.Highlights at a glanceHigh capacity: 61.44 kWh gross storage capacity for large energy systemsUsable energy: 55.30 kWh at 90 per cent depth of dischargeFlexible scalability: Up to 16 battery racks can be operated in parallelIntelligent control: Integrated BMS protects against overcharging, deep discharge and overheatingEasy to use: Quick installation in 19-inch rack formatEfficient energy storage for modern projectsWith its high voltage of 614.4 V and a wide operating voltage range of 528 to 700.8 V, the BOS-G 60 PRO provides an excellent basis for integration into existing energy systems. The lithium iron phosphate technology used ensures high safety, low self-discharge and a long service life.Modular and customisableThe system architecture enables flexible scaling up to 16 parallel battery racks and the parallel AC operation of up to 10 Deye inverters. This allows the system to be tailored precisely to growing requirements while remaining expandable in the long term.Safe energy managementThe integrated BMS continuously monitors cell voltages, temperatures and state of charge. It actively protects against critical operating conditions and optimises the service life of the battery units through automatic cell balancing.Who is the Deye BOS-G 60 PRO suitable for?The high-voltage storage set is ideal for:Commercial premises with high energy consumption or emergency power requirementsLarge-scale photovoltaic systems with a focus on optimising self-consumptionPrivate households with above-average energy consumptionProject developers who require a modular, certified high-voltage system  ModelDEYBOS-G-PRO Battery typeLiFePO4 Module capacity (kWh)5.12 Module nominal voltage (V)51.2 Module capacity (Ah)100 Max. battery module number InSeries (optional)5-16 System nominal voltage (V)256-819.2 System operating voltage (V)220~934.4 System capacity (kWh)25.6-81.92 System usable capacity (kWh)23.04-73.73 Charging/discharging current (A) - recommendation50 Charging/discharging current (A) - rated value100 Charging/discharging current (A) - peak discharge (2 min,25°C)125 Operating temperature (°C)Charging: 0 ~ 55 / Discharging: -20 ~ 55 Display system indicator Yellow : Battery High VoltagePower On Red : Battery System Alarm Communication portCAN2.0, RS485 Humidity5% ~ 85%RH Altitude≤3000m IP protection rating of the enclosureIP20 Storage temperature (°C)0 ~ 35 Dimensions (W/D/H, mm)530 * 602 * 2219 Weight (kg)290-837 Installation locationFloor mounting Recommended depth of discharge90% Cycle life25 ± 2°C, 0.5C/0.5C, EOL70% ≥ 6000 Warranty10 years CertificationsUN38.3 / CE / CE-EMC / IEC62040 / CEC / VDE  FAQs on the Deye BOS-G 60 PRO high-voltage storage setWhat storage capacity does the BOS‑G 60 PRO deliver and how much of it is usable?The set consists of 12 LiFePO₄ modules, each with a gross capacity of 5.12 kWh, resulting in a total storage capacity of 61.44 kWh. Thanks to the recommended 90% depth of discharge (DoD), around 55.3 kWh net usable energy is available, ideal for large private households or commercial applications.What protection and management functions does the BMS perform?The integrated battery management system (BMS) continuously monitors and protects against overvoltage and undervoltage, overcurrent, short circuit and temperature deviations. It also actively balances all cells and ensures optimal charging and discharging conditions.Which electrical parameters (voltage & current) are relevant?Operating voltage: between 528 V and 700.8 V, nominal voltage at 614.4 V DCMaximum continuous current: 100 AShort-term peak current: 125 A (approx. 2 minutes)Is the system modularly expandable?Yes, the modular concept allows several BOS‑G 60 PRO storage systems to be operated in parallel. Up to 16 tanks (racks) in series connection and up to 10 inverters in AC connection are possible in order to scale capacity and redundancy as required.In which temperature range can the storage system be operated?Discharging: from −20 °C to +55 °CCharging: from 0 °C to +55 °C. Scope of delivery Deye BOS-G60 PRO high-voltage storage set (61.44 kWh) with rack system: System compositionThis product is a set and consists of a rack cabinet and the 13 individual slide-in modules (1x BMS and 12x batteries).Component 1: Deye rack system / battery cabinetA cabinet for accommodating the BMS unit and the battery modules, often with castors and feet.Component 2: Deye control box / BMS slide-in moduleThe central control unit (BMS/BCCB), which is inserted into the rack cabinet as a module.Component 3 to 14: Twelve Deye BOS-G-PRO-Pack5.1 high-voltage battery slide-in modules (5.12 kWh each)Twelve pure high-voltage battery modules, which are also inserted into the rack cabinet.1 x set of battery connection cables (plus & minus)A pair of special high-voltage power cables for connecting the BMS module to a compatible high-voltage hybrid inverter.1 x communication cable (CAN/RS485)A long data cable for communication between the BMS module and the inverter.12 x connecting bridge / series connection cableShort, robust cables or fixed bridges for connecting the thirteen slide-in modules (BMS + 12 batteries) to each other in the rack.1 x earthing cableA protective conductor cable for the compliant earthing of the rack system.1 x mounting accessories (rack mounting)Includes screws and rails for fastening the modules within the rack, as well as material for anchoring the cabinet to the floor.1 x operating and installation instructionsA printed manual describing the assembly of the complete rack system.

The SOLR6100 solar cable (100 metres, 6mm²) in red is the professional solution for photovoltaic installations where maximum efficiency and minimum resistance are paramount. With a length of 100 metres per roll and a reinforced cross-section of 6mm², this cable is ideal for large rooftop installations, ground-mounted projects, or systems with high current ratings. The red marking allows standard-compliant identification of the positive pole (+) and ensures clear cabling.Certified according to the international standard IEC 62930, this cable provides the highest safety for modern PV systems with voltages up to 1500V DC. The larger cross-section minimises voltage losses even over long distances and is ideal for high-performance module generations delivering high currents.Highlights at a glanceMaximum efficiency: The 6mm² cross-section greatly reduces electrical resistance and ensures higher yield compared to standard cables.Certified safety: Conforms to IEC 62930 (H1Z2Z2-K) standard for use in photovoltaic systems up to 1500V DC.High coverage: 100 metres in one piece allow for individual cuts for custom string connections without unnecessary junctions.Extremely durable: High quality XLPO double insulation is UV-resistant, ozone-resistant and flame-retardant for a service life of over 25 years.Corrosion-protected conductor: Fine stranded, tinned copper provides consistently optimal conductivity and protection against oxidation in humid environments.Wide temperature range: Safe operation under extreme weather conditions from -40°C to +90°C (short-term peaks up to +120°C).Areas of applicationThe SOLR6100 is the first choice for demanding PV projects:Large rooftop systems & PV parksEfficient string cabling and connecting distant module fields to the central inverter.High-performance balcony systemsIdeal for systems with modern modules (500Wp+), to transport high currents without loss.Battery storage & off-grid systemsPerfect for 24V or 48V systems where minimal voltage drops are crucial for charging efficiency.Installation & safety instructionsProfessional connectionUse only MC4 connectors explicitly approved for 6mm² cable with this cross-section and a high-quality crimping tool.Mechanical protectionWhen routing on the roof or through walls, use corrugated conduits or cable ducting to protect the insulation from mechanical abrasion and rodent damage.Parallel cable routingRun positive (red) and negative (black) cables as parallel and close as possible together, to minimise electromagnetic interference (induction loops). Features Model / SKU**SOLR6100** Conductor cross-section**6.0 mm²** Form of supply**100 metre roll** ColourRed (positive pole) Rated voltageDC: 1.5 kV / Max. 1.8 kV Conductor materialCopper, tinned (Class 5) Temperature range-40°C to +120°C (on the conductor) Standardisation**IEC 62930 / EN 50618** Special featureHalogen-free, UV & ozone resistant  FAQs on the red solar cable 100m 6mm²Why should I choose 6mm² instead of 4mm²?For higher yield and future-proofing. Especially with cable lengths over 15–20 metres or when using modules with high current (Isc over 13A), the voltage drop with 6mm² is noticeably lower. This means that more energy reaches the inverter and the cable remains cooler under high load.Can the cable be laid directly in the ground?Only in a protective conduit. Although the insulation is very robust, the cable is not designed for direct burial without protection. In suitable cable protection conduit, however, laying in the ground is no problem.Is the cable resistant to chemicals?Yes. The XLPO insulation is resistant to acids, alkalis, and ammonia. This makes it especially suitable for installations in agriculture (barns) or in areas affected by industrial pollution.

The solar cable SOLS6100 (100 metres, 6mm²) in black is the professional solution for photovoltaic installations where maximum efficiency and minimal resistance are paramount. With a length of 100 metres on a reel and a reinforced cross-section of 6mm², this cable is excellent for large roof systems, open-area projects or systems with high currents. The black identification enables standard-compliant identification of the negative pole (-) and ensures clearly arranged cabling.Certified in accordance with the international standard IEC 62930, this cable offers maximum safety for modern PV systems with voltages of up to 1500V DC. The larger cross-section minimises voltage losses even over long distances and is ideal for high-performance module generations delivering high currents.Highlights at a glanceMaximum efficiency: The 6mm² cross-section significantly reduces the electrical resistance and provides more yield compared to standard cables.Certified safety: Complies with IEC 62930 (H1Z2Z2-K) standard for use in photovoltaic systems up to 1500V DC.Long range: 100 metres in one piece enable custom cuts for tailor-made string connections without unnecessary separation points.Extremely resistant: The high-quality XLPO double insulation is UV-resistant, ozone-resistant and flame-retardant for a lifespan of more than 25 years.Corrosion-protected conductor: Fine-stranded, tinned copper offers permanently optimum conductivity and protects against oxidation in a damp environment.Wide temperature range: Safe operation in extreme weather conditions from -40°C to +90°C (short-term peaks up to +120°C).Areas of applicationThe SOLS6100 is the number one choice for demanding PV projects:Large roof systems & PV parksEfficient string cabling and connection of distant module fields to the central inverter.High-performance balcony power plantsIdeal for systems with modern modules (500Wp+), to ensure the loss-free transport of high currents.Battery storage & stand-alone systemsPerfect for 24V or 48V systems where low voltage drops are crucial for charging efficiency.Assembly & safety instructionsProfessional connectionsFor this cross-section, use only MC4 connectors that are explicitly approved for 6mm² cable, and use high-quality crimping pliers.Mechanical protectionWhen laying on the roof or through walls, use corrugated ducts or cable ducts to protect the insulation from mechanical abrasion and rodent bites.Parallel cable routingRoute the black negative cable as parallel and close as possible to the red positive cable to minimise electromagnetic interference fields (induction loops). Features Model / SKU**SOLS6100** Conductor cross-section**6.0 mm²** Delivery form**100 metre reel** ColourBlack (negative pole) Rated voltageDC: 1.5 kV / Max. 1.8 kV Conductor materialCopper, tinned (Class 5) Temperature range-40°C to +120°C (on the conductor) Standardisation**IEC 62930 / EN 50618** Special featureHalogen-free, UV- & ozone-resistant  FAQs about solar cable black 100m 6mm²Why should I choose 6mm² instead of 4mm²?For more yield and future-proofing.Especially for cable lengths above 15–20 metres or when using modules with high current (Isc above 13A), voltage drop is noticeably lower with 6mm². This means more energy reaches the inverter and the cable stays cooler under high load.Can the cable be laid directly in the ground?Only in protective conduit.Although the insulation is very robust, the cable is not designed for direct burial without protection. Installation in a suitable cable conduit in the ground, however, is no problem.Is the cable resistant to chemicals?Yes.The XLPO insulation is resistant to acids, alkalis and ammonia. This makes it particularly suitable for agricultural (stables) or industrially impacted areas.

The Deye GB-L-PRO20 is a powerful and highly flexible high-voltage energy storage system, specially developed for modern photovoltaic systems in residential and small commercial settings. With a gross capacity of 20.45 kWh offers a massive energy reserve to maximise independence from the public grid and reliably supply even large households or commercial premises.The system is supplied including the GBL-PRO BMS supplied, which acts as an intelligent control unit monitoring the entire tower. Thanks to the advanced lithium iron phosphate technology (LiFePO4) the system guarantees maximum safety whilst offering a long service life. The simple stackable design allows for quick installation without complex cable connections between the modules.Highlights at a glanceHigh safety: The cobalt-free LiFePO4 chemistry ensures maximum safety, thermal stability and a long cycle life of over 6,000 cycles.Central GBL-PRO BMS: The intelligent control unit monitors each cell individually and protects the entire system against overcharging, deep discharge and thermal issues.Easy installation: Thanks to the modular "plug-and-play" design, stacking assembly is quick and requires no additional cable connections between the battery modules.Efficient high-voltage technology: The high system voltage reduces conversion losses and optimises efficiency in combination with modern hybrid inverters.Emergency power capable: Supports high discharge rates to safely supply critical loads or entire households even during power cuts.Robust design: With an IP65 protection rating, the system is dust-tight and protected against water jets, enabling installation in a variety of environments.Areas of applicationThe GB-L-PRO20 is the ideal storage solution for sophisticated energy concepts:Self-consumption optimisationStorage of surplus solar power during the day for use in the evening and at night, even with high baseline consumption.Back-up power supplyWhen used in conjunction with compatible hybrid inverters, the system provides protection against power cuts (blackout protection) for the entire house.Peak shavingReduction in electricity costs through the buffering of peak loads, particularly in households with multiple electric charging points or heat pumps.Installation & safety instructionsSite selectionPlace the storage unit on a level, load-bearing surface (note the weight). Ensure adequate ventilation and observe the recommended minimum clearances.Protection against extreme temperaturesAlthough the system is designed for a wide temperature range, installation in cool, frost-free indoor areas (e.g. a basement or utility room) extends the service life of the cells.Professional commissioningThe electrical connection to the inverter and the configuration of the GBL-PRO BMS must only be carried out by certified specialist personnel. Features ModelDeye GB-L-PRO20 Nominal energy20.45 kWh Nominal voltage512 V (high voltage) Battery typeLithium iron phosphate (LiFePO4) Max. charge/discharge current50 A Usable energy (90% DoD)18.41 kWh Protection ratingIP65 (indoor/outdoor installation) Cycle life≥ 6000 cycles (@25°C, 90% DoD) CertificationsCE, IEC62619, VDE2510-50, UN38.3  FAQs about the Deye GB-L-PRO20 battery systemCan I expand the system later with additional modules?Yes.Thanks to the modular design, you can flexibly scale the capacity of your storage system. The GBL-PRO BMS automatically detects new modules and integrates them into battery management.Which inverters is the system compatible with?Primarily with Deye hybrid inverters.The system is optimally matched to Deye's high-voltage hybrid inverters. Please check the current compatibility list for third-party suppliers before installation.Why is LiFePO4 used as the cell chemistry?For superior safety.Unlike conventional lithium-ion batteries (NMC), LiFePO4 is chemically much more stable. Even if mechanically damaged, these cells do not tend to catch fire.Does the system have integrated heating for winter operation?Yes, optionally.The Deye GB-L-PRO20 system supports an integrated heating function that enables the battery cells to be safely charged even at low ambient temperatures. This effectively protects the cells in installations in unheated rooms.What is the maximum discharge power of the 20.45 kWh system?Depending on the module configuration.Thanks to high-voltage technology, the system can deliver high discharge currents. As a rule, this 20.45 kWh pack enables a continuous power output of approx. 10 kW to 15 kW, ideal for operating wall boxes or air conditioning systems. Scope of delivery Deye GB-L-PRO20 modular high-voltage battery system (20.45 kWh): System compositionThis product is a set and consists of six separate main components which together form a 20.45 kWh high-voltage tower system.Component 1: Deye GBL-PRO BMS (high-voltage control unit & base)The central control unit (BMS) that manages the entire high-voltage system. This unit forms the base of the battery tower.Components 2 to 6: Five Deye GB-L-PRO-BATT high-voltage battery modules (4.09 kWh each)Five high-voltage battery modules, each with 4.09 kWh, which are stacked onto the BMS unit and on top of one another.1 x set of battery connection cables (positive & negative)A pair of special high-voltage power cables for connecting the BMS unit to a compatible high-voltage hybrid inverter.1 x communication cable (CAN/RS485)A data cable for communication between the BMS and the inverter.4 x connecting bridge / series connection cableShort, robust cables or fixed bridges for connecting the five battery modules in series.1 x earthing cableA protective earth conductor cable for compliant earthing of the BMS unit.1 x mounting accessories (tower assembly)Includes screws or locking elements for securely connecting the six components into a tower.1 x operating and installation manualA printed manual describing the installation of the entire high-voltage tower system.