Deye Smart Transmitter | LoRa wireless module | SUN-SMART-TX01

The Deye SUN-EVSE11K01-EU is a smart 11 kW wallbox for the safe, fast and efficient charging of electric vehicles in both domestic and commercial settings. Thanks to its three-phase connection with a charging power of up to 11 kW, it charges compatible electric and plug-in hybrid vehicles significantly faster than a conventional domestic socket.Thanks to smart control options, integrated communication interfaces and comprehensive safety features, the Deye SUN-EVSE11K01-EU can be flexibly integrated into a modern energy management system. When used in conjunction with compatible Deye inverters, the wallbox can also be used for surplus PV charging, allowing you to use the solar power you generate yourself specifically to charge your vehicle.The key benefits at a glanceHigh charging powerWith a charging power of up to 11 kW via a three-phase connection, the Wallbox charges a compatible electric vehicle much faster than a standard domestic socket.Smart controlCharging processes can be conveniently monitored and controlled via the app. In addition, the wallbox supports authentication via RFID card as well as straightforward plug-and-play operation.Weatherproof and robust designThe housing, with an IP65 protection rating, is protected against dust and water jets. The IK10 impact resistance provides additional protection against mechanical impacts and ensures reliable operation in garages, carports and suitable outdoor areas.Comprehensive safety featuresThe integrated residual current detection for 30 mA AC and 6 mA DC, as well as protection functions against overvoltage, undervoltage, overload, short circuit and overheating, ensure safe charging operation. In accordance with the specified product characteristics, no external Type B residual current circuit breaker is required.Smart charging and solar optimisationThe Deye SUN-EVSE11K01-EU is more than just a standard charging point. It can be used as a smart component of a modern energy system and helps to increase the self-consumption of self-generated solar power. When used in conjunction with compatible Deye inverters, the wallbox supports surplus PV charging. This means the electric vehicle is charged primarily using the solar energy currently available.The wallbox can be integrated into your home network and compatible energy management systems via the built-in Wi-Fi, Bluetooth and RS485 interfaces. Charging times can be scheduled so that the vehicle is charged, for example, when solar power generation is high or during off-peak tariff periods. Control and monitoring are carried out via the Solarman or Deye cloud application.Flexible installation and operationThe wallbox can be mounted directly on a wall or, alternatively, on a suitable freestanding column. The integrated 5-metre Type 2 charging cable allows direct connection to numerous electric and plug-in hybrid vehicles commonly found in Europe. The compact housing and intuitive operation facilitate integration into both domestic and commercial charging environments.Technical Specifications ModelDeye SUN-EVSE11K01-EU Device type11 kW Smart Wallbox Maximum charging power11 kW, three-phase Rated voltage230 / 400 V AC Rated currentmax. 16 A Mains connection3P + N + PE Frequency50 / 60 Hz Charging plugType 2 in accordance with IEC 62196-2 Cable length5 m AuthenticationRFID card, app, plug-and-play CommunicationWi-Fi, Bluetooth, RS485 App controlSolarman / Deye Cloud Residual current detectionIntegrated AC 30 mA and DC 6 mA External RCD, Type BNot required according to the specified configuration Safety featuresOvervoltage, undervoltage, overload, short circuit, overheating and lightning protection Protection classIP65 Impact resistanceIK10 Installation methodWall mounting or free-standing column Dimensions (H × W × D)approx. 325 × 181 × 87 mm Weightapprox. 4 kg Operating temperature-25 °C to +50 °C PV surplus chargingCompatible with Deye inverters Contents of the package1x Deye SUN-EVSE11K01-EU wallbox, 11 kW1x integrated Type 2 charging cable, 5 m long1x wall bracket including fixing materials with screws and wall plugs1x User Manual and Installation Guide

Deye’s SUN-EVSE22K01-EU-AC Smart Wallbox enables smart, safe and highly efficient charging of electric and plug-in hybrid vehicles directly at home or in a commercial setting. With a charging power of up to 22 kW via a three-phase connection, it charges a compatible vehicle significantly faster than a conventional domestic socket.Thanks to its smart integration into existing Deye energy systems, the wallbox can be powered specifically using self-generated solar power. Various charging modes, control via the Deye Cloud app and modern communication interfaces make the SUN-EVSE22K01-EU-AC a flexible charging solution for efficient energy management.Your benefits at a glanceUp to 22 kW charging powerWith a three-phase connection, the wallbox provides a charging power of up to 22 kW. In single-phase operation, up to 7 kW is possible. This allows compatible electric vehicles to be charged much faster than from a conventional socket.Smart app controlThe Deye Cloud App allows you to conveniently monitor and schedule charging sessions via your smartphone. This enables flexible management of charging times, operating modes and energy consumption.PV-optimised chargingWhen used in conjunction with a compatible Deye energy system, the wallbox can prioritise charging when the photovoltaic system is producing surplus solar power. This increases self-consumption and reduces the amount of electricity purchased from the grid at a cost.Comprehensive safety featuresAn integrated 6 mA DC fault current detection system, together with protection functions against overvoltage, undervoltage, overload, short circuit, earth fault and overtemperature, ensures safe and reliable charging operation.Robust housing for indoor and outdoor useWith an IP66 protection rating, the wallbox is dust-tight and protected against powerful water jets. It is therefore suitable for installation in garages, carports and suitable outdoor areas.Standardised Type-2 connectionThe integrated Type-2 charging cable allows connection to numerous electric and plug-in hybrid vehicles commonly used in Europe. The vehicle can be connected directly to the wallbox without the need for a separate charging cable.Smart energy management for your homeThe Deye SUN-EVSE22K01-EU-AC is more than just a standard charging station. Thanks to its smart communication with compatible Deye components, it can be integrated into the home’s energy management system. The charging power can be adjusted to suit the available energy and the selected operating mode.In addition to direct Plug-&-Play charging, the wallbox supports scheduled charging and a solar-priority mode. This allows the electric vehicle to be charged specifically at off-peak times or using surplus PV energy. The LED status indicator provides continuous updates on the current operating status.Communication and controlThe wallbox features Wi-Fi, Bluetooth Low Energy and LoRa. This allows it to be integrated into both a local network and a compatible Deye energy system. Supported communication protocols such as OCPP 1.6 and Modbus TCP facilitate integration into suitable charging and energy management systems.Technical Specifications ModelDeye SUN-EVSE22K01-EU-AC Device typeSmart AC Wallbox Rated power22 kW three-phase / 7 kW single-phase Rated voltage400 V AC three-phase / 230 V AC single-phase Rated current32 A Frequency50 / 60 Hz Connection type3L+N+PE three-phase / L+N+PE single-phase Charging plugIntegrated Type-2 charging cable Cable lengthapprox. 4.2 m, up to 5 m depending on the model CommunicationWi-Fi / BLE / LoRa ProtocolsOCPP 1.6 / Modbus TCP Charging modesPlug & Play, time-controlled charging, solar priority App supportDeye Cloud app DisplayLED status indicator DC fault current detection6 mA integrated Protection functionsOVP, UVP, OLP, SCP, earth fault protection and overtemperature protection Surge protectionType II integrated Protection ratingIP66 Operating temperature-40 °C to +55 °C Permissible humidity5 % to 95 %, non-condensing Dimensions104 × 264 × 57.5 mm Weightapprox. 3.7 kg CoolingNatural convection Noise levels< 25 dB CertificationsEN IEC 61851-1 / IEC 61851-1 / CE-compliant Scope of delivery and equipment1x Deye SUN-EVSE22K01-EU-AC Smart Wallbox with 22 kW1x integrated Type-2 charging cable1x wall bracket including mounting material1x operating and installation instructions

The Deye SUN-12K-SG05LP3-EU-SM2 is a three-phase hybrid inverter for residential and commercial energy projects. It combines an inverter, battery charger and energy management system in one device, enabling efficient, flexible energy flow control in new installations and retrofits.Highlights at a glanceSupports both lead-acid and lithium-ion batteries for various storage optionsBattery voltage range from 40 to 60 volts for flexible application possibilitiesMaximum charging and discharging current of 240 amperes for fast energy absorption and releaseMaximum PV input power of 18,000 watts enables high-performance solar systemsTwo independent MPPT inputs for maximum energy yield even with different module orientationsUnbalanced output power with up to 50 percent of the rated power per phase for flexible load distributionEfficient energy conversion for modern requirementsThe Deye SUN-12K-SG05LP3-EU-SM2 achieves a maximum efficiency of 97.6 percent and boasts an MPPT efficiency of over 99 percent. The wide MPPT voltage range of 200 to 650 volts, in conjunction with a maximum PV input voltage of 800 volts, ensures efficient energy capture even under varying irradiation conditions. This high efficiency ensures economical operation and maximum yields from the solar system.Flexibility and scalabilityThe Deye SUN-12K-SG05LP3-EU-SM2 can be flexibly adapted to different requirements. Thanks to the ability to operate up to ten devices in parallel, it is suitable for both smaller systems and large energy projects. The AC coupling allows easy integration into existing systems, making the inverter also ideal for retrofitting. Support for various battery types enables tailor-made storage solutions matched to individual needs and budgets.Reliability and protectionWith an IP65 protection rating, the inverter is optimally protected against dust and water, and is suitable for demanding environmental conditions. The wide operating temperature range from minus 40 to plus 60 degrees Celsius ensures safe operation even under extreme climatic conditions. Comprehensive protection mechanisms such as overcurrent, overvoltage, short-circuit and thermal protection, as well as DC insulation impedance monitoring, provide maximum operational safety and a long system lifespan.Who is the Deye SUN-12K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forHomeowners who want to increase their self-consumption quota and reduce energy costsCommercial enterprises that require a stable and efficient power supplyUsers who want to expand existing solar systems with modern storage solutionsProjects in regions with fluctuating grid stability, where diesel generators are used as an additional energy source  ModelDEYE SUN 12K-SG05LP3-EU-SM2 Battery input data Battery typeLi-lon Battery voltage range (V)40~60 Max. charging current (A)240 Max. discharging current (A)240 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adjustment to BMS PV string input data Max. DC input power (W)18000 Nominal PV input voltage (V)550 Start voltage (V)160 MPP voltage range (V)200-650 Max. DC input voltage (V)800 PV input current (A)26+26 Max. PV short-circuit current (A)39+39 Number of MPPT2 Strings per MPPT2+2 AC output data AC rated power and UPS power (W)12000 Max. AC output power (W)13200 AC rated output current (A)18.2/17.4 Max. rated AC output current (A)20/19.2 Max. continuous AC running (A)45 Peak power (without grid)2 times rated power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) DC feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection SafeguardsDC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, Thermal Protection, AC OutputSurge Protection, AC Output Short Circuit Protection, DC Component Monitoring, Overvoltage Load Protection,Earth Fault Current Monitoring, Arc Fault Circuit Interrupter (optional), Grid Monitoring,Island Protection Monitoring, Earth Fault Detection, DC Input Switch, DC IsolationImpedance Monitoring, Residual Current Detection (RCD), Surge Protection Level Surge categoryDC Type II/AC Type III Certifications and standards Grid approvalsIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G98, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN; RS232 Weight (kg)35,2 Size (mm)386B×660H×250 D Protection classIP65 Installation styleWall bracket Warranty10 years  FAQs on the 10 kW Deye Hybrid InverterWhat types of batteries does the inverter support?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range of 40 to 60 volts.What is the maximum charging and discharging current?The maximum charging and discharging current is 240 amperes, which enables fast energy transfer.Can the inverter be operated with a diesel generator?Yes, the Deye SUN-12K-SG05LP3-EU-SM2 supports the integration of diesel generators for a safe and uninterrupted power supply.Which communication interfaces are available?The inverter offers interfaces such as RS485, RS232, CAN as well as options for GPRS, Wi-Fi, Bluetooth, 4G and LAN for monitoring and control.Can the inverter supply unbalanced loads?Yes, the inverter can supply an unbalanced load of up to 100 percent, with each phase being able to deliver up to 50 percent of the rated power. Scope of delivery: Deye SUN-12K-SG05LP3-EU-SM2 three-phase hybrid inverter 12KW 1 x Deye SUN-12K-SG04LP3-EU-SM2 inverterA three-phase hybrid inverter with 12 kW output, integrated LCD touchscreen and support for 48V low-voltage battery systems.1 x wall mount bracketA robust metal mounting rail for securely attaching the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A pluggable communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman App.3 x current transformers (CT - Current Transformer)External clamp current transformers for measuring energy flows at the house connection, necessary for zero feed-in and optimising self-consumption.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) to connect the PV strings to the inverter.1 x communication cable (BMS)A pre-tethered RJ45 data cable for connecting between the inverter and battery management system.1 x mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for correct installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-16K-SG01LP1-EU is a robust hybrid inverter, ideally suited for use in private households and small businesses. It impresses with an AC output of 15 kW and ensures efficient and reliable energy supply, thanks to flexible battery utilisation as well as comprehensive safety features. The unit is suitable for both grid-connected and off-grid operation.Highlights at a glanceHigh performance: 15 kW nominal power, 16 kW peak powerFlexible operation: On-grid and off-grid use possiblePowerful battery integration: Max. charge/discharge current 250 A, compatible with 48 V low-voltage batteriesEfficient energy conversion: Max. efficiency 97.6%, 2 MPPTs for optimal PV utilisationUser-friendly: Colour touchscreen, integrated WLAN, control via appScalable: Parallel operation of up to 16 devices for larger projectsEfficient energy managementThe SUN-16K-SG01LP1-EU optimises PV energy self-consumption by prioritising direct use of electricity and storing surplus energy in batteries or feeding it into the grid. The battery can also be charged via a diesel generator, making it the ideal backup solution or suitable for remote off-grid sites.Flexible storage and system integrationThe system is suitable for a range of battery manufacturers thanks to its compatibility with 48 V low-voltage batteries and communication interfaces (RS485, CAN). Six programmable time windows for charging and discharging allow for intelligent management, even in conjunction with variable electricity tariffs.Maximum safety and reliabilityThe inverter guarantees safe and reliable operation under all conditions via IP65 protection rating, integrated safety mechanisms (overvoltage, short-circuit and anti-islanding protection) as well as compliance with international standards.Who is the Deye SUN-16K-SG01LP1-EU suitable for?This hybrid inverter is ideal for:Private households with high energy demands and self-sufficiency requirementsSmall businesses with a need for continuous energy supplyOperators of off-grid systems with diesel generator integrationInstallations that should remain scalable through parallel operationProperties  ModelDeye SUN-16K-SG01LP1-EU Battery input data Battery typeLead-acid or lithium-ion Battery voltage range (V)40~60 Max. charge current (A)290 Max. discharge current (A)290 Charging strategy for Li-ion batterySelf-adjustment to BMS PV string input data Max. DC input power (W)25600 Rated PV input voltage (V)500 Start voltage (V)125 MPP voltage range (V)150-425 PV input current (A)26+26+26 Max. PV short-circuit current (A)44+44+44 Number of MPPT3 Strings per MPPT2+2+2 AC output data AC nominal power and UPS power (W)16000 Max. AC output power (W)17600 AC output nominal current (A)69.6 Max. AC current (A)76.5 Max. continuous AC throughput (A)100 Output frequency and voltage50/60Hz; L/N/PE 220/230Vac Grid typeSingle-phase Efficiency Max. efficiency97.60% Euro efficiency97.00% MPPT efficiency99.90% General data Operating temperature range (°C)-40~60°C, >45°C power reduction Communication with BMSRS485; CAN Weight (kg)35.5 Size (mm)527W x 700H x 294D Degree of protectionIP65 Warranty10 years  FAQs about the Deye SUN-16K-SG01LP1-EU Hybrid InverterWhich batteries is the 16 kW inverter compatible with?The inverter supports 48 V low-voltage batteries and is compatible with various manufacturers thanks to RS485 and CAN interfaces.Can the Deye inverter also be operated without a battery?Yes, the SUN-16K-SG01LP1-EU works both with and without battery storage.Is parallel operation possible?Up to 16 units can be operated in parallel, which allows for use in larger projects.How is the inverter system controlled?The control is conveniently done via a colour touchscreen directly on the device or via app using the integrated WLAN.What warranty does Deye offer?A manufacturer’s warranty of 10 years applies to the SUN-16K-SG01LP1-EU. Scope of delivery: Deye SUN-16K-SG01LP1-EU (16 kW 1-phase hybrid inverter) 1 x Deye SUN-16K-SG01LP1-EU inverterAn extremely powerful single-phase hybrid inverter with 16 kW output, integrated LCD colour touchscreen and support for 48 V low-voltage battery systems.1 x Wall Mount BracketA robust metal rail for secure attachment of the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A pluggable communication module for connecting to the internet for remote monitoring via Deye Cloud or Solarman app.1 x current transformer (CT - Current Transformer)An external clamp-on current transformer for measuring energy flows at the house connection, necessary for zero feed-in and self-consumption optimisation.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter and the battery management system.1 x installation kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for professional installation of the wall mount bracket.1 x User Manual (operating instructions)A printed manual with detailed installation instructions, circuit diagrams, and safety information.

The Eastron SDM630-M is a modern and multifunctional digital energy meter for three-phase networks, designed for comprehensive monitoring and analysis of electrical parameters. Thanks to its integrated Modbus RTU interface, it can be seamlessly integrated into building automation, energy management or photovoltaic monitoring systems. As a direct-measuring meter up to 100 amps per phase, it offers precise data acquisition for a wide range of applications in commercial, industrial and demanding private households.Highlights at a glancePrecise measurement: Reliably measures a wide range of electrical quantities (kWh, kvarh, kW, kvar, kVA, P, F, PF, Hz, dmd, V, A, THD).Modbus RTU interface: Enables simple remote reading and integration into higher-level systems via RS485.Multifunctional: Suitable for energy monitoring, cost centre billing, load management and PV system monitoring.Direct measuring up to 100A: No external current transformers required for currents up to 100A per phase, simplifies installation.Compact DIN rail format: Simple and space-saving installation in standard electrical distribution boards (4 modules wide).Comprehensive energy monitoring for professional applicationsThe Eastron SDM630-M is the ideal instrument for detailed recording of energy consumption and generation. It enables the precise monitoring of total consumption, individual machines or circuits as well as the recording of energy generated by a photovoltaic system. Thanks to the measurement of active and reactive energy in both directions (import/export), it is perfectly suited for monitoring PV systems with self-consumption. Its data forms the basis for energy efficiency measures, internal cost allocations or the monitoring of load profiles.Precise measurement and flexible integrationIn addition to active energy (kWh), this energy meter also measures reactive energy (kvarh), active power (kW), reactive power (kvar), apparent power (kVA), current (A), voltage (V), frequency (Hz), power factor (PF) and total harmonic distortion (THD) for voltage and current. The integrated Modbus RTU interface via RS485 enables all these values to be queried by systems such as data loggers, PLC controllers or energy management software. Direct measurement up to 100A eliminates the need for complex installation and configuration of external current transformers in many standard applications.Simple installation and operationThe SDM630-M is quick and easy to install on a standard DIN rail in electrical distribution boards. The large, illuminated LCD display enables the most important measured values to be read directly on site. The buttons on the front can be used to navigate intuitively through the various display menus in order to view all the recorded parameters or make basic settings. Features  ModelEastron SDM630-M Modbus ApplicationThree-phase energy meter MeasurementActive/reactive energy (kWh/kvarh),Voltage (V), current (A), power (W/VA/var),Power factor, frequency (Hz) Power supply types3-phase (3p4w, 3p3w), 1-phase (1p2w) Rated voltage (V)3x230/400 V AC Rated current (A)10(100) A (direct measurement) Accuracy classCl. 1 (active energy) / Cl. B (MID) InterfaceModbus RTU (RS485) MountingDIN rail (DIN rail) Dimensions (W x H x D in mm)72 x 100 x 66 (4 modules) Weight (g)approx. 300  FAQs about the Eastron SDM630-M energy meterWhat is the difference between the SDM630-M and other SDM630 variants?The "M" in the designation stands for the integrated Modbus RTU interface. There are also variants with pulse outputs (e.g. SDM630-V1/-V2), with M-Bus interface or as MID-calibrated versions for billing purposes (SDM630-Modbus-MID).Do I need external current transformers for this meter?No, this model is designed for Direct measurement of currents up to 100 amperes per phase. No external current transformers (CTs) are required as long as this current range is not exceeded. Special CT meters (e.g. SDM630MCT) are available for higher currents.Is this meter suitable for official billing (e.g. with the energy supplier)?No, this standard model is usually not MID-calibrated and must therefore not be used for billing to the nearest kilowatt hour. It is primarily intended for monitoring purposes and internal cost allocation. For billing purposes, you need a variant with MID approval (e.g. SDM630-Modbus-MID).How is the data read out via Modbus?To read out the data, you need a Modbus master (e.g. a data logger, a PLC, a Raspberry Pi or a PC with appropriate software and an RS485 interface). The master sends queries to the address of the meter in the RS485 network and reads the values from the defined Modbus registers. The register assignment can be found in the manual for the meter.

The Deye SE-F16 is a high-capacity low-voltage energy storage system (51.2 V) designed for demanding use in residential and commercial photovoltaic systems. With an enormous rated capacity of 16 kWh (314 Ah) in just one compact housing module, this storage system significantly minimises the space required and the installation effort.This model uses the proven and intrinsically safe lithium iron phosphate (LiFePO4) cell chemistry. Combined with the intelligent Battery Management System (BMS) and a wide range of monitoring options (including Bluetooth), the SE-F16 offers maximum safety, scalability and longevity for the self-sufficient energy supply of your home or business.Highlights at a glanceMassive storage capacity (16 kWh): With a rated capacity of 314 Ah at 51.2 V, this single module provides enough energy to reliably supply large households even during prolonged periods of low sunlight.Safe LiFePO4 cell chemistry: The lithium iron phosphate technology guarantees maximum thermal stability and virtually eliminates the risk of thermal runaway (fire hazard).Powerful power handling: The system supports an enormous continuous discharge current of up to 230 A and peak currents of 280 A (for 10 seconds), ideal for power-hungry large loads such as heat pumps or wallboxes.Extreme scalability: For even greater energy requirements, up to 32 units can be connected in parallel as standard. With a CAN bridge, scaling up to 64 modules is even possible.Smart monitoring & connectivity: In addition to CAN2.0 and RS485, the storage system features Bluetooth for convenient monitoring via smartphone app. The "C" version (SE-F16-C) also has an integrated LCD display.Longevity & efficiency: Certified for over 6,000 charge cycles (at 25°C), ensuring decades of reliable operating life in daily use.Flexible installation: Despite the high weight, the housing system is extremely flexible and can be installed either on the wall, floor-standing or stacked.ApplicationsThe Deye SE-F16 is the perfect solution for demanding energy scenarios:Single-family and multi-family houses: Maximises self-consumption of PV power and, in combination with a hybrid inverter, provides a powerful emergency power supply for the entire building.Commercial applications (C&I): Used to cap expensive peak loads (peak shaving) and stores large PV surpluses in agricultural or commercial businesses.Off-grid & stand-alone systems: Thanks to its gigantic capacity and high continuous discharge power, it offers a reliable energy source for completely off-grid properties.Installation & safety instructionsLogistics and weight: At a weight of 109 kg, the module is extremely heavy. Installation should обязательно be carried out with suitable lifting equipment (stair climber) or by at least two to three people.Choice of location: The storage system must be installed in a dry and ideally frost-free room (protection class IP21). Charging at temperatures below 0°C is automatically blocked by the BMS to protect the cells.Cable cross-sections: Due to the extremely high currents (up to 230 A continuous load), the connection cables to the inverter or busbar must have a cross-section of at least 70 mm², preferably 95 mm², in order to avoid overheating and voltage losses.Commissioning with parallel connection: If you connect several SE-F16 modules together, all units must be charged to exactly the same voltage level before cabling in order to prevent dangerous equalisation currents. Features  ModelDeye SE-F16 (C series with display) Technology**LiFePO4** (lithium iron phosphate) Rated voltage**51.2 V** (operating range: 44.8 V - 57.6 V) Rated capacity**314 Ah** Nominal energy**16.0 kWh** Max. continuous current**230 A** (peak current 280 A for 10s) Cycle life**≥ 6000 cycles** (at 90% DOD and 25°C) CommunicationCAN 2.0 / RS485 / Bluetooth + app (incl. LCD display) Dimensions (W x D x H)approx. 400 x 233 x 708 mm Weightapprox. **109 kg** Mounting typeFloor mounting, wall mounting or stacked  H2: FAQs about the Deye SE-F16What is the difference between the SE-F16 and the SE-F12?The main difference lies in the capacity and the housing height. The SE-F16 delivers 16 kWh (314 Ah) and weighs around 109 kg, while the SE-F12 11.8 kWh (230 Ah) offers and weighs approx. 84 kg. Both use the same 51.2V architecture and are designed for identical applications, but the F16 offers significantly more autonomy per installed module.What does the "C" in the designation SE-F16-C mean?The suffix "-C" in Deye storage systems indicates the extended model variant which, in addition to Bluetooth monitoring, is also equipped with an integrated LCD display on the front of the housing. This allows the current state of charge (SoC), cell voltages and warning messages to be read directly on the device without having to open the app.Do I absolutely need a Deye inverter for this battery?No, but it is strongly recommended for smooth operation. The SE-F16 is "Plug & Play" compatible with Deye low-voltage hybrid inverters (such as the SG04 series), since the BMS protocol matches natively. With third-party brands (such as Victron, SMA or Solis), communication must first be configured manually via DIP switches or software settings. It is strongly recommended to check the compatibility list, as changes may occur on the manufacturer side.