Deye AI-W5.1-B Modular Low-Voltage Battery System (10 kWh)

The Deye SUN-12K-SG05LP3-EU-SM2 is a three-phase hybrid inverter for residential and commercial energy projects. It combines an inverter, battery charger and energy management system in one device, enabling efficient, flexible energy flow control in new installations and retrofits.Highlights at a glanceSupports both lead-acid and lithium-ion batteries for various storage optionsBattery voltage range from 40 to 60 volts for flexible application possibilitiesMaximum charging and discharging current of 240 amperes for fast energy absorption and releaseMaximum PV input power of 18,000 watts enables high-performance solar systemsTwo independent MPPT inputs for maximum energy yield even with different module orientationsUnbalanced output power with up to 50 percent of the rated power per phase for flexible load distributionEfficient energy conversion for modern requirementsThe Deye SUN-12K-SG05LP3-EU-SM2 achieves a maximum efficiency of 97.6 percent and boasts an MPPT efficiency of over 99 percent. The wide MPPT voltage range of 200 to 650 volts, in conjunction with a maximum PV input voltage of 800 volts, ensures efficient energy capture even under varying irradiation conditions. This high efficiency ensures economical operation and maximum yields from the solar system.Flexibility and scalabilityThe Deye SUN-12K-SG05LP3-EU-SM2 can be flexibly adapted to different requirements. Thanks to the ability to operate up to ten devices in parallel, it is suitable for both smaller systems and large energy projects. The AC coupling allows easy integration into existing systems, making the inverter also ideal for retrofitting. Support for various battery types enables tailor-made storage solutions matched to individual needs and budgets.Reliability and protectionWith an IP65 protection rating, the inverter is optimally protected against dust and water, and is suitable for demanding environmental conditions. The wide operating temperature range from minus 40 to plus 60 degrees Celsius ensures safe operation even under extreme climatic conditions. Comprehensive protection mechanisms such as overcurrent, overvoltage, short-circuit and thermal protection, as well as DC insulation impedance monitoring, provide maximum operational safety and a long system lifespan.Who is the Deye SUN-12K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forHomeowners who want to increase their self-consumption quota and reduce energy costsCommercial enterprises that require a stable and efficient power supplyUsers who want to expand existing solar systems with modern storage solutionsProjects in regions with fluctuating grid stability, where diesel generators are used as an additional energy source  ModelDEYE SUN 12K-SG05LP3-EU-SM2 Battery input data Battery typeLi-lon Battery voltage range (V)40~60 Max. charging current (A)240 Max. discharging current (A)240 Number of battery inputs1 Charging strategy for Li-ion batterySelf-adjustment to BMS PV string input data Max. DC input power (W)18000 Nominal PV input voltage (V)550 Start voltage (V)160 MPP voltage range (V)200-650 Max. DC input voltage (V)800 PV input current (A)26+26 Max. PV short-circuit current (A)39+39 Number of MPPT2 Strings per MPPT2+2 AC output data AC rated power and UPS power (W)12000 Max. AC output power (W)13200 AC rated output current (A)18.2/17.4 Max. rated AC output current (A)20/19.2 Max. continuous AC running (A)45 Peak power (without grid)2 times rated power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( rated power ) DC feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection SafeguardsDC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, Thermal Protection, AC OutputSurge Protection, AC Output Short Circuit Protection, DC Component Monitoring, Overvoltage Load Protection,Earth Fault Current Monitoring, Arc Fault Circuit Interrupter (optional), Grid Monitoring,Island Protection Monitoring, Earth Fault Detection, DC Input Switch, DC IsolationImpedance Monitoring, Residual Current Detection (RCD), Surge Protection Level Surge categoryDC Type II/AC Type III Certifications and standards Grid approvalsIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G98, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN; RS232 Weight (kg)35,2 Size (mm)386B×660H×250 D Protection classIP65 Installation styleWall bracket Warranty10 years  FAQs on the 10 kW Deye Hybrid InverterWhat types of batteries does the inverter support?The inverter is compatible with lead-acid and lithium-ion batteries in the voltage range of 40 to 60 volts.What is the maximum charging and discharging current?The maximum charging and discharging current is 240 amperes, which enables fast energy transfer.Can the inverter be operated with a diesel generator?Yes, the Deye SUN-12K-SG05LP3-EU-SM2 supports the integration of diesel generators for a safe and uninterrupted power supply.Which communication interfaces are available?The inverter offers interfaces such as RS485, RS232, CAN as well as options for GPRS, Wi-Fi, Bluetooth, 4G and LAN for monitoring and control.Can the inverter supply unbalanced loads?Yes, the inverter can supply an unbalanced load of up to 100 percent, with each phase being able to deliver up to 50 percent of the rated power. Scope of delivery: Deye SUN-12K-SG05LP3-EU-SM2 three-phase hybrid inverter 12KW 1 x Deye SUN-12K-SG04LP3-EU-SM2 inverterA three-phase hybrid inverter with 12 kW output, integrated LCD touchscreen and support for 48V low-voltage battery systems.1 x wall mount bracketA robust metal mounting rail for securely attaching the device to a load-bearing wall.1 x Wi-Fi stick (data logger)A pluggable communication module for connection to the internet for remote monitoring via Deye Cloud or Solarman App.3 x current transformers (CT - Current Transformer)External clamp current transformers for measuring energy flows at the house connection, necessary for zero feed-in and optimising self-consumption.1 x set of PV connectors (MC4-compatible)The required pairs of DC plugs (plus and minus) to connect the PV strings to the inverter.1 x communication cable (BMS)A pre-tethered RJ45 data cable for connecting between the inverter and battery management system.1 x mounting kit (screws and dowels)A set of stainless steel screws and heavy-duty dowels for correct installation of the wall bracket.1 x User ManualA printed manual with detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-3.6K-SG05LP1-EU-AM2 is a compact, single-phase hybrid inverter designed specifically for smaller photovoltaic systems in residential buildings. With an AC output power of 3.6 kW it offers the ideal introduction to energy independence by combining solar power generation, battery management and emergency power supply in a single device.As part of the SG05 series this inverter is designed for operation with 48V low-voltage batteries optimised. This makes the system particularly flexible and cost-effective when selecting the storage unit. Despite its compact design, it features all the ‘major’ Deye features, such as the Smart Load connection and parallel scalability.Highlights at a glanceLow-voltage battery connection: Compatible with standard 48V lithium-ion and lead-acid batteries, offering a wide range of cost-effective storage options.Colour touchscreen LCD: Intuitive operation and real-time monitoring of all energy flows directly on the device via the integrated display.2 MPPT trackers: Enables the connection of two independent string arrays, ideal for roofs with different orientations (e.g. east-west).Excellent backup function: Lightning-fast switchover to emergency power in less than 10 ms, ensuring that sensitive equipment continues to run without interruption in the event of a mains failure.AC coupling possible: Existing solar systems can be easily integrated via the inverter to retrofit them with a storage unit.Parallel connection: Up to 16 units can be connected in parallel to flexibly increase system performance as demand rises.Smart load connection: The "Smart Load" port enables the targeted control of loads such as heating elements or pool pumps when there is a surplus of solar energy.Areas of applicationThe SUN-3.6K is the specialist for efficient small-scale systems:Detached houses & flatsPerfect for PV systems up to approx. 4.6 kWp, to drastically increase self-consumption in the household.RetrofittingAdd a 48V battery storage system to an existing installation without having to replace the old inverter.Critical infrastructureProtection for servers, aquariums or heating controls thanks to the reliable UPS function.Installation & Safety InstructionsBattery protectionAs high currents can flow in 48V systems, it is essential to ensure that the cable cross-sections are sufficiently sized and that a suitable DC fuse is installed between the battery and the inverter.Wall mountingThe device is robustly built and designed for wall mounting. Thanks to its IP65 protection rating, it can also be installed in sheltered outdoor areas.Earthing & lightning protectionEnsure that the system is properly earthed to protect the electronics and connected loads from power surges.. Features ModelDeye SUN-3.6K-SG05LP1-EU-AM2 Rated output power3.6 kW (3,600 watts) Phases1-phase (230V) Battery typeLow voltage (LV) 48V Li-Ion / Lead Number of MPP trackers2 MPPT Max. charging/discharging current90 A Max. efficiency97,60 % Protection classIP65** (weatherproof) Special featureIncludes **connection cable set  FAQs for the Deye SUN-3.6K-SG05LP1Which batteries are compatible with this inverter?Almost all 48V lithium storage systems.It is perfectly compatible with popular models such as Pylontech (US2000C/US3000C/US5000), Dyness or Deye’s own low-voltage batteries. Conventional lead-gel batteries can also be configured. It is essential to check the batteries against the compatibility list before purchasing.Can I use the inverter for a balcony power plant?Technically yes, but oversized.While it far exceeds the output of a balcony power plant, it offers the advantage that you can integrate a proper battery and later scale the system into a full roof-mounted installation.Is the Wi-Fi module for app control included?Usually, yes.Deye usually comes with a Wi-Fi dongle, which you can use to connect the system to the "Solarman" app or the Deye portal to view yields and consumption worldwide.Can the unit start a generator?Yes.Via the signal port, the inverter can send an automatic start command to compatible generators if the battery level is too low and there is no sunlight. Scope of delivery: Deye SUN-3.6K-SG05LP1-EU-AM2-P (3.6 kW single-phase hybrid inverter) 1 x Deye SUN-3.6K-SG05LP1-EU-AM2-P inverterA compact single-phase hybrid inverter with 3.6 kW output, an integrated colour LCD touchscreen and support for 48V low-voltage battery systems.1 x wall mount bracketA sturdy metal mounting rail for securely fixing the unit to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the internet for remote monitoring via the Deye Cloud or Solarman app.1 x current transformer (CT)An external folding current transformer for measuring energy flows at the property connection, necessary for net metering and optimising self-consumption.1 x set of battery connection cables (DC cables)A pair of pre-assembled high-performance cables (red and black) for direct electrical connection to a 48V battery (specific to this bundle version).1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (positive and negative) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter to the battery management system.1 x mounting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for the correct installation of the wall mount.1 x User ManualA printed manual containing detailed installation instructions, circuit diagrams and safety instructions.

The Deye SUN-10K-SG05LP3-EU-SM2 is a high-performance three-phase hybrid inverter designed for both residential and commercial solar installations. It integrates solar power, battery storage and grid power in a smart energy management system to ensure maximum efficiency and flexibility. This inverter is a future-proof and robust solution for sustainable energy supply and is ideal for new installations as well as for retrofitting existing systems.Highlights at a glanceSupports lead-acid and lithium-ion batteries for flexible storage solutionsMaximum charge and discharge current of 210 amperes for rapid energy transferMaximum PV input power of 15,000 watts for high-performance solar systemsTwo independent MPPT inputs for optimal utilisation of solar energy with different module orientationsUnbalanced output power with up to 50 percent of nominal power per phase for flexible load distributionParallel connection of up to 10 devices for individually scalable systemsEfficient energy conversion for modern requirementsThe Deye SUN-10K-SG05LP3-EU-SM2 achieves a maximum efficiency of 97.6 percent and an MPPT efficiency of over 99 percent. With an MPPT voltage range of 200 to 650 volts and a maximum PV input voltage of 800 volts, the inverter works reliably and efficiently even under different irradiation conditions. This ensures optimal utilisation of solar energy and economical operation of the entire system.Flexibility and scalabilityThe Deye SUN-10K-SG05LP3-EU-SM2 offers maximum flexibility with the ability to operate up to ten units in parallel. This allows for easy adjustment to different power requirements. AC coupling enables uncomplicated integration into existing systems without significant intervention in the existing infrastructure. Thanks to support for both lead-acid and lithium-ion batteries, customised storage solutions can be realised to meet specific needs.Reliability and protectionThe inverter is protected with IP65 rating against dust and water, making it suitable for use under demanding environmental conditions. A wide operating temperature range from minus 40 to plus 60 degrees Celsius ensures reliable operation even in extreme conditions. Extensive protection features such as overcurrent, overvoltage, short-circuit and thermal protection, DC reverse polarity protection and monitoring of DC insulation impedance ensure the safety of inverter, battery and connected devices.Who is the Deye SUN-10K-SG05LP3-EU-SM2 suitable for?This inverter is ideal forHomeowners who want to increase their self-consumption and reduce energy costsCommercial enterprises that require stable and efficient energy supplyOperators of existing solar plants wishing to expand their systems with a modern storage solutionInstallations in regions with fluctuating grid stability, where diesel generators provide an additional energy source  ModelDEYE SUN 10K-SG05LP3-EU-SM2 Battery input data Battery typeLi-lon Battery voltage range (V)40~60 Max. charging current (A)210 Max. discharge current (A)210 Number of battery inputs1 Charging strategy for Li-ion batteryAuto-adjustment to BMS PV string input data Max. DC input power (W)15000 Rated PV input voltage (V)550 Start voltage (V)160 MPP voltage range (V)200-650 Max. DC input voltage (V)800 PV input current (A)26+26 Max. PV short-circuit current (A)39+39 Number of MPPT2 Strings per MPPT2+2 AC output data AC rated power and UPS power (W)10000 Max. AC output power (W)11000 AC rated output current (A)15.2/14.5 Maximum rated AC output current (A)16.7/16 Max. continuous AC current (A)45 Peak output (without grid)2x rated power, 10 S Output power factor0.8 leading to 0.8 lagging Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Grid typeThree-phase Total harmonic distortion (THD)< 3% ( nominal power ) DC feed-in<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesDC polarity reverse connection protection, AC output overcurrent protection, thermal protection, AC outputOvervoltage protection, AC output short-circuit protection, DC component monitoring, overvoltage load protection,Earth fault current monitoring, arc fault current interrupter (optional), grid monitoring,Islanding protection monitoring, earth fault detection, DC input switch, DC insulationImpedance monitoring, reverse current detection (RCD), surge protection level Surge categoryDC Type II/AC Type III Certifications and standards Grid approvalsIEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G98, G99, VDE-AR-N 4105 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C power reduction CoolingIntelligent cooling Noise (dB)<55 dB Communication with BMSRS485; CAN; RS232 Weight (kg)35.2 Size (mm)422B×699.3H×279T Degree of protectionIP65 Installation styleWall mounting Warranty10 years  FAQs on the Deye 10 kW three-phase hybrid inverterIs the inverter suitable for outdoor use?Yes, with IP65 protection, the SUN-10K-SG05LP3-EU-SM2 is protected against dust and water splashes and is therefore suitable for outdoor useHow is the system monitored and controlled?The intelligent monitoring platform enables settings to be made and firmware updates to be performed remotely.Can the inverter be operated with a diesel generator?Yes, the Deye SUN-10K-SG05LP3-EU-SM2 supports integration of diesel generators for additional power supply security.Is the inverter suitable for retrofitting existing installations?Yes, thanks to AC coupling, the inverter can be easily integrated into existing solar systems.Can the inverter supply unbalanced loads?Yes, the inverter can handle an unbalanced load up to 100 percent, with each phase delivering up to 50 percent of the rated power. Scope of delivery: Deye SUN-10K-SG05LP3-EU-SM2 three-phase hybrid inverter 10KW 1 x Deye SUN-10K-SG05LP3-EU-SM2 inverterA three-phase hybrid inverter with 10 kW power, integrated LCD touchscreen and support for 48V low-voltage batteries.1 x wall mount bracketA sturdy metal mounting rail for securely attaching the device to a solid wall.1 x Wi-Fi stick (data logger)A plug-in communication module to connect to the Internet for remote monitoring via Deye Cloud or Solarman App.3 x current transformers (CT - current transformer)External clamp-on current transformers to measure energy flows at the house connection, necessary for zero feed-in and optimising self-consumption.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (plus and minus) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter to the battery management system.1 x mounting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for correct installation of the wall mounting.1 x user manual (User Manual)A printed manual with detailed installation instructions, circuit diagrams and safety instructions.